Change credentials of Agent Connection Management

Hello Gurus's,
we could only connect our SMD Agents with a direct P4 connection. We have registred the Agents at our central SLD.
The Agents logs gives no errors and the Agents are available at SMD Agent Candidates Management. So far so good.
But if we would attach the Agents in the Agent Candidates Manageme, we only have a "http connection via ms" in Agent Connection Management.
picture: http://www.myimg.de/?img=SMD26750.jpg
Has someone a suggestion how we can change it?
regards
chris

hi
its the load balancing for cluster systems.refer page 27th of the document attached by jai
P4 Connection via the Java EE Message server: the Diagnostics agent contacts the Java EE message server of the
Managing system on the HTTP port (81xx) to retrieve the P4 port (5xx04) of one of the Dispatcher nodes running in the Java EE
cluster (use a load balancing mechanism). This kind of connection supports High Availability Managing systems.
jansi

Similar Messages

Problem with Connection Manager. Can't change connection string / Server name

p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin-top:0cm;margin-right:0cm;margin-bottom:10.0pt;margin-left:0cm;line-height:115%;font-size:11.0pt;font-family:'Calibri','sans-serif';}
.MsoChpDefault
{font-size:10.0pt;}
.MsoPapDefault
{line-height:115%;}
@page Section1
{size:612.0pt 792.0pt;margin:72.0pt 72.0pt 72.0pt 72.0pt;}
div.Section1
{page:Section1;}
Hi,
I have copied a number of SSID packages from a live server to my test server and am trying to get them up and running but I have a problem with the connection. The only thing that is different is the server name. I decided to keep the same connection in the connection manager as it is referenced in a dtsConfig file. I changed the dtsConfig file to reference the new servername [Data Source= new test server name]. I also check my paths and they are pointing to the correct config locations etc.
I found this post which was similar to my problem but I still get problems with the connection
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1319961&SiteID=1
I updated the connection by changing the server name in the actual connection. I did this from the data flow tab in the Connection Managers sections (MS Visual Studio). Right clicked - Edit - changed the name of the server name to my test server and selected the database. Test connection was fine, and saved this.
Once I saved this, the connection string changed to my current test server in the properties of the connection. However when I run the package I get the following error:
Error: 0xC0202009 at ReportsImport, Connection manager "myconnectionstring": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login timeout expired".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Named Pipes Provider: Could not open a connection to SQL Server [53]. ".
Error: 0xC020801C at Myprocess import from file, BuyAtReportsImport [79]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "myconnectionstring" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Myprocess import from file, DTS.Pipeline: component "ReportsImport" (79) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Myprocess import from file, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Myprocess import from file: There were errors during task validation.
So even if I change the existing connection properties and save and Build my package again, my connection properties (connectionstring, servername etc) all revert back to its original data source when I re-open the package. Simply it does not seem to be saving the connection properties i put in.
What am I doing wrong or how can I change the existing connection manager to look at the new server. The database is the same and I have full admin privilege on the server.
I don't want to recreate my packages as there are alot and they are not simple.
After changing the connection properties, saving and reloading I get a connection error. But this is because it is not retaining the new connection manger setting i entered.
Incidentally - I created a new SSID to perform a simple connection and write to the the server and it was OK so there is no problem with actually seeing the my test server.
Thanks in advance

Yes, the package is in visual studio and I have executed it. There are no errors but in the output i have the error message about my connection. My dtsConfig file is added to the project in the 'Package Configuration Organizer' and path and files are correct. This is the output error:
Error: 0xC020801C at xx import from file, xxReportsImport [79]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "myconnectionname" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I will try and run it using dtexec.exe. if I have two config files do i use
dtsexec.exe /f <packagename> /conf <configfile> /conf <secondconfigfile>

Sql server agent job failing to connect excel connection manager of SSIS package by 32-bit mode run time

I am unable to succeed with sql agent job, I am trying to execute the SSIS package through sql agent job by ticking 32 bit runtime check box in 64 bit machine , even it does not worked..
could any one helpme on this?
Source: Excel Load Connection manager "Excel Connection Manager"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class
not registered". End Error TS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error
messages posted before this with more information on why the AcquireConnection method call failed. End... The package execution fa... The step failed.

Hello Keerthi,
Can you please modify settings and set delay validation for Excel connection manager? I think its validating connection and failing because it might be picking that from some variable.
Alternatively, please run package using below and see what happens.
EXEC master..xp_cmdshell 'DTEXEC.exe /SQL "Folder\Package" /SERVER Servername'
I will recommend you to follow steps in below link.
http://www.sqlhammer.com/blog/running-ssis-packages-in-32-bit/
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

Changing OVM3 Server agent password in OVM3 manager

Hello, I changed OVM3 server agent password via this procedure http://docs.oracle.com/cd/E20065_01/doc.30/e18548/server.htm#CCHJIJFD
Now I can't rediscover this server in OVM manager. I also can't delete server from server pool. How could I do it manually, for example if server is down and I want to remove it from pool?
Here is re-discover procedure output:
Job Construction Phase
begin()
Appended operation 'Server Refresh' to object '00:16:36:f6:80:b4:00:16:36:f6:80:b2:00:16:36:d2 (blade7)'.
commit()
Completed Step: COMMIT
Objects and Operations
+Object (IN_USE): [Server] 00:16:36:f6:80:b4:00:16:36:f6:80:b2:00:16:36:d2 (blade7)+
Operation: Server Refresh
Job Running Phase at 12:29 on Mon, Jan 9, 2012
Job Participants: []
Actioner
Starting operation 'Server Refresh' on object '00:16:36:f6:80:b4:00:16:36:f6:80:b2:00:16:36:d2 (blade7)'
Setting Context to model only in job with id=1326130184380
Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: discover_cluster to server: 172.25.60.10 failed. OVMAPI_4004E Server Failed Command: discover_cluster, Status:
Mon Jan 09 12:29:47 EST 2012
Mon Jan 09 12:29:47 EST 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:474)
at com.oracle.ovm.mgr.action.ActionEngine.sendDiscoverCommand(ActionEngine.java:283)
at com.oracle.ovm.mgr.action.ClusterAction.getClusterInfo(ClusterAction.java:184)
at com.oracle.ovm.mgr.discover.ovm.ServerClusterDiscoverHandler.queryMaster(ServerClusterDiscoverHandler.java:139)
at com.oracle.ovm.mgr.discover.ovm.ServerClusterDiscoverHandler.process(ServerClusterDiscoverHandler.java:230)
at com.oracle.ovm.mgr.discover.ovm.DiscoverHandler.execute(DiscoverHandler.java:55)
at com.oracle.ovm.mgr.discover.DiscoverEngine.handleDiscover(DiscoverEngine.java:435)
at com.oracle.ovm.mgr.discover.DiscoverEngine.handleDiscover(DiscoverEngine.java:420)
at com.oracle.ovm.mgr.discover.DiscoverEngine.handleDiscover(DiscoverEngine.java:405)
at com.oracle.ovm.mgr.discover.DiscoverEngine.handleDefaultDiscover(DiscoverEngine.java:388)
at com.oracle.ovm.mgr.discover.DiscoverEngine.discoverServer(DiscoverEngine.java:229)
at com.oracle.ovm.mgr.op.physical.ServerRefresh.action(ServerRefresh.java:64)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:191)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:257)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1019)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:223)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:751)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:395)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:453)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: discover_cluster, Status:
Mon Jan 09 12:29:47 EST 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendAction(ActionEngine.java:752)
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:470)
+... 26 more+
FailedOperationCleanup
Starting failed operation 'Server Refresh' cleanup on object 'blade7'
Complete rollback operation 'Server Refresh' completed with direction=blade7
Rollbacker
Objects To Be Rolled Back
+Object (IN_USE): [BondPort] network.BondPort (2) in 00:16:36:f6:80:b4:00:16:36:f6:80:b2:00:16:36:d2 (network.BondPort (2) in blade7)+
+Object (IN_USE): [EthernetPort] network.EthernetPort (1) in 00:16:36:f6:80:b4:00:16:36:f6:80:b2:00:16:36:d2 with MAC 00:16:36:f6:80:b4 (network.EthernetPort (1) in blade7)+
+Object (IN_USE): [EthernetPort] network.EthernetPort (3) in 00:16:36:f6:80:b4:00:16:36:f6:80:b2:00:16:36:d2 with MAC 00:16:36:d2:e1:d8 (network.EthernetPort (3) in blade7)+
+Object (IN_USE): [BondPort] network.BondPort (1) in 00:16:36:f6:80:b4:00:16:36:f6:80:b2:00:16:36:d2 (network.BondPort (1) in blade7)+
+Object (IN_USE): [EthernetPort] network.EthernetPort (2) in 00:16:36:f6:80:b4:00:16:36:f6:80:b2:00:16:36:d2 with MAC 00:16:36:f6:80:b2 (network.EthernetPort (2) in blade7)+
+Object (IN_USE): [Server] 00:16:36:f6:80:b4:00:16:36:f6:80:b2:00:16:36:d2 (blade7)+
+Object (IN_USE): [FileSystemMount] 00:16:36:f6:80:b4:00:16:36:f6:80:b2:00:16:36:d2_mount_/OVS/Repositories/0004fb00000300006d4b745c71639eb8 (blade7_/OVS/Repositories/0004fb00000300006d4b745c71639eb8)+
+Object (IN_USE): [EthernetPort] network.EthernetPort (4) in 00:16:36:f6:80:b4:00:16:36:f6:80:b2:00:16:36:d2 with MAC 00:16:36:d2:e1:d9 (network.EthernetPort (4) in blade7)+
Completed Step: ROLLBACK
Job failed commit (internal) due to OVMAPI_4010E Attempt to send command: discover_cluster to server: 172.25.60.10 failed. OVMAPI_4004E Server Failed Command: discover_cluster, Status:
Mon Jan 09 12:29:47 EST 2012
Mon Jan 09 12:29:47 EST 2012
com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: discover_cluster to server: 172.25.60.10 failed. OVMAPI_4004E Server Failed Command: discover_cluster, Status:
Mon Jan 09 12:29:47 EST 2012
Mon Jan 09 12:29:47 EST 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:474)
at com.oracle.ovm.mgr.action.ActionEngine.sendDiscoverCommand(ActionEngine.java:283)
at com.oracle.ovm.mgr.action.ClusterAction.getClusterInfo(ClusterAction.java:184)
at com.oracle.ovm.mgr.discover.ovm.ServerClusterDiscoverHandler.queryMaster(ServerClusterDiscoverHandler.java:139)
at com.oracle.ovm.mgr.discover.ovm.ServerClusterDiscoverHandler.process(ServerClusterDiscoverHandler.java:230)
at com.oracle.ovm.mgr.discover.ovm.DiscoverHandler.execute(DiscoverHandler.java:55)
at com.oracle.ovm.mgr.discover.DiscoverEngine.handleDiscover(DiscoverEngine.java:435)
at com.oracle.ovm.mgr.discover.DiscoverEngine.handleDiscover(DiscoverEngine.java:420)
at com.oracle.ovm.mgr.discover.DiscoverEngine.handleDiscover(DiscoverEngine.java:405)
at com.oracle.ovm.mgr.discover.DiscoverEngine.handleDefaultDiscover(DiscoverEngine.java:388)
at com.oracle.ovm.mgr.discover.DiscoverEngine.discoverServer(DiscoverEngine.java:229)
at com.oracle.ovm.mgr.op.physical.ServerRefresh.action(ServerRefresh.java:64)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:191)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:257)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1019)
at sun.reflect.GeneratedMethodAccessor2115.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:223)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:751)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:395)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:453)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: discover_cluster, Status:
Mon Jan 09 12:29:47 EST 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendAction(ActionEngine.java:752)
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:470)
+... 26 more+
End of Job
----------

I removed server from server pool and reisntalled ovm3 server. But I can't remove this server from unassigned server list. It's now in error state. I can do rediscover server and acknowledge all events for this server but it's still in error state. How could I remove it and do discover again?

Is there a way to change fixed width Flat file connection manager to delimited without losing all the column names ?

Is there a way to change fixed width Flat file connection manager to delimited without losing all the column names ?

Unfortunately not as it is a quite dramatic change causing the metadata being refreshed. I would try to open though the package file in a text editor and find them before doing the change, then after you made the change to the FF connector try to reconstitute
/ replace the autimatically generated columns with the old names.
Arthur
MyBlog
Twitter

Agent Connection to Instance error in Oracle Database 11G EM

Hi
I am getting the following error message when logging into EM on Oracle 11G Database.
Failed to connect to database instance: ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach).
Users can connect to the database no problem and it shows the Database Instance down, Agent Connection to Instance failed. The General tab shows green and the database is up.
I have checked the emctl status and lsnrctl commands and the listener is up and servicing the database. I checked the ORACLE_SID environment (in Windows Server 2003) and this is correct.
I have recently changed the passwords for SYSMAN and DBNSMP which were due to expire and since then the EM console has not loaded correctly.
As I said the database is up and can service users through their application.
Any help would be appreciated.
Respect.

Hi
The listener is up and is handling the database and users are connecting succesfully. I think it is more to do with the Enterprise Manager.
Can anyone give me some further info to troubleshoot?
Regards
Spencer

Agent Connection to Instance Unavailable

Win2k3 64 bit
Oracle Database 10g Release 10.2.0.5.0 - 64bit Production
I brought up a new 10.2.0.5.0 db on Win2k3 64 bit server. Everything is working fine, at least it seems so. This server has been running for 2 months now and this issue kept coming up in the last 2 months.
Database Instance status is Open
Listener status is Up
General status is Up
Agent Connection to Instance is Unavailable.
Users SYSMAN and DBSNMP are OPEN.
This will be the 3rd time in the last 2 months if I rebuild EMCA again.
Is anyone else besides me experiencing this issue? Why is this happening and how do I fix it permanently?

1.Post the output of :
SQL> select global_name from global_name;
SQL> show parameter db_domain;
2.lsnrctl service
3.lsnrctl status
4.Did you change the hostname?
5.Is timezon of agent and console the same?
6.In the file $AGENT_HOME/sysman/config/emd.properties, make sure the following parameters are correct. Obtain the values from $OMS_HOME/sysman/config/emd.properties
1. REPOSITORY_URL
2. emdWalletSrcUrl
3. emdWalletDest (ensure that this destination is present on your management server).
7.If you're using Data Guard in 11g for primary/standby configuration, you may want to check the Data Guard configuration status. With this type of error, it's usually caused by the database parameter setting for log archive that differs with the Data Guard config for log transport and apply. For example, if the local archive log destination on the primary is pointing to the standby site instead of local archive directory (or local flash_recovery_area), The GC will generate this error and blank out the options for database instance in GC.
I am just pasting the above texts from different forum link when I just said "Agent Connection to Instance Unavailable" to google.
Regards
Girish Sharma

Hostname change option in Willy Enterprise Manager

Hi,
We are facing one problem during configuration of Introscope agent with
Wily enterprise manager (In Solution Manager 7.1).
Scenario:
Wily EM installed on Solution Manager Server (unxa0275) but introscope
agents for managed system are not able to connect to the EM in solution
manager.
Issue:
There are 2 host name for (unxs0275 and unxa0275) for solution manager
server. Unxa0275 is the actual host name and unxs0275 is the virtual
host name for the same server (solution Manager).
When I installed EM (Enterprise manager) on solution manager server it
get installed with host name as unxa0275 and that is not accessible by
the other server ( managed system).
Option:
1.Is it possible to change the Wily EM host after installation? If yes
then where I need to make changes.
2.Or weather I need to install the EM again? And then in that case how
to set the host variable so the installation
script u201C./introscope7.1solaris.SAPEndUser.binu201D will take the host name
unxs0275 rather then unxa0275.
I need to change the hostname from Unxa0275 to UnxS0275??During the Installation of EM hostname option is not coming.Please guide me.

Hi,
you can change to hostname of wily introscope enterprise manager within the solution manager to a virtual hostname as follow:
call SICF an activate Service WD_SISE_ADMIN
call transaction SOLMAN_SETUP_ADMIN
Choose Generic Storage Admin UI
Configurtaion ID: EM_CONFIG_ID-EM_CONFIG_ID
change values CLIENT_HOST, EM_FQN, EM_IP, LMDB_SERVEERNAME, SERVERNAME, SERVER_HOST --> save and check the new values in SOLMAN_SETUP -> Basic Configuration --> Configure CA Wily Introscope (virtual host should now be displayed)
afterwards you have to supply all managed systems with the new configuration Managed System Configuration
Enter System Parameter (Check Introscope Host "edit and save")
Configure Automatically (Run "Introscope Host Adapter" and "Byte Code Adapter Installation")
Regards, Christoph

Diagnostics - SLD User in "Agent Candidates Management"

Dear all,
I have fully implemented SAP Solution Manager Diagnostics.
I still have a question :
1. From SOLMAN, I start SOLMAN_WORKCENTER transaction
2. Then, I choose RCA.
3. I start "Agent Administration"
4. When the SMD java application is opened for "Agent Administration (SMD Agent)",
I click on "Agent Candidates Management".
5. Here, I choose "Custom SLD Connection Parameters"
My question :
By default, SLD User is set to : SLDAPIUSER
Initially, the SLD User was set to : SLDDSUSERSMC
Do you know where this default value is defined ?
Best regards
CP2009

Hello,
I think by means of transaction SLDAPICUST you can change the SLD Access Data.
Maybe you can alsoo try changing parameters in Visual Administrator/Server/Services/Configuration Adapter
Best regards,
Fernando
Edited by: Fernando Camarero on Jan 14, 2010 8:48 AM

ORA-12505: Database Instance and Agent Connection to Instance will not work

Hi,
I have the following error: in Oracle 10g I try to connect to OEM and the listener is up but the Database Instance and Agent Connection to Instance are down. When I attempt to restart the instance, OEM will just hang indefinitely. I have used tnsping and the results are OK. Is that descriptive enough? What can I do to fix this?
regards,
John

I changed the SID because I was mistaken and thought of the oracle database name. I have corrected the ORACLE_SID to that given in my tnsnames.ora file which I post here:
ORACLE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Lasirius-laptop)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = oracle)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
These are the default settings that were made on installation. I have been working with this installation for 2 months, and it just suddenly stopped working. I have changed no other settings apart from the mistaken ORACLE_SID environment variable in this post, which has now been changed to PLSExtProc. Here is my init.ora:
# replace "clustdb" with your database name
db_name = clustdb
compatible=9.0.0
db_files = 1024 # INITIAL
#INITIAL
#db_files=80
#SMALL
#DB_files=400
#MEDIUM
#db_files=1000
#LARGE
control_files = ("\\.\clustdb_control1", "\\.\clustdb_control2")
db_file_multiblock_read_count = 8 # INITIAL
# db_file_multiblock_read_count = 8
#SMALL
#db_file_multiblock_read_count = 16
#MEDIUM
#db_file_multiblock_read_count = 32
#LARGE
#Datawarehouse
db_block_size=8192
# Transaction processing
# db_block_size=4096
open_cursors=300
#Transaction processing
#sort_area_size=524288
#Datawarehouse
sort_area_size=1048576
large_pool_size=1048576 #Transaction processing, Datawarehouse
db_cache_size=50331648 #Datawarehouse, Transaction processing
java_pool_size=67108864 #Datawarehouse, Transaction processing
# db_block_buffers = 200 # INITIAL
# db_block_buffers=100 #SMALL
# db_block_buffers =550 # MEDIUM
# db_block_buffers=3200 #LARGE
#shared_pool_size = 52428800 # INITIAL
shared_pool_size = 67108864 # datewarehouse, transaction processing
log_checkpoint_interval = 10000
processes = 59 # INITIAL
# processes = 50
#SMALL
#processes = 100
#MEDIUM
#processes = 200
#LARGE
parallel_max_servers = 5
#SMALL
# parallel_max_servers = 4 x (number of CPUs)
#MEDIUM
# parallel_max_servers = 4 x (number of CPUs)
# LARGE
log_buffer = 8192 # INITIAL
#log_buffer = 8192
#SMALL
#log_buffer = 32768
#MEDIUM
#log_buffer = 163840
#LARGE
# audit_trail = true # if you want auditing
# timed_statistics = true # if you want timed statistics
max_dump_file_size = 10240 # limit trace file size to 10 K each
# Uncommenting the line below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest = %ORACLE_HOME%/admin/clustdb/arch
# log_archive_format = "%%ORACLE_SID%%T%TS%S.ARC"
# If using private rollback segments, place lines of the following
# form at the end of this file:
# <sid>.rollback_segments = (name1, name2)
# If using public rollback segments, define how many
# rollback segments each instance will pick up, using the formula
# # of rollback segments = transactions / transactions_per_rollback_segment
# In this example each instance will grab 40/10 = 4:
# transactions = 40
# transactions_per_rollback_segment = 10
# Global Naming -- enforce that a dblink has same name as the db it connects to
global_names = TRUE
# Edit and uncomment the following line to provide the suffix that will be
# appended to the db_name parameter (separated with a dot) and stored as the
# global database name when a database is created. If your site uses
# Internet Domain names for e-mail, then the part of your e-mail address after
# the '@' is a good candidate for this parameter value.
# db_domain = us.acme.com # global database name is db_name.db_domain
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = TRUE
# define directories to store trace and alert files
background_dump_dest=%ORACLE_HOME%/admin/clustdb/bdump
user_dump_dest=%ORACLE_HOME%/admin/clustdb/
db_block_size = 4096
remote_login_passwordfile = exclusive
# text_enable = TRUE
# The following parameters are needed for the Advanced Replication Option
job_queue_processes = 2
# job_queue_processes = 4 #datawarehouse
# job_queue_interval = 10
# job_queue_keep_connections = false
distributed_transactions = 5
open_links = 4
# The following parameters are instance-specific parameters that are
# specified for two instances named clustdb1 and clustdb2
undo_management=AUTO # For automatic undo management
# = MANUAL For manual/RBS undo management
cluster_database= true
cluster_database_instances=2
remote_listener=LISTENERS_CLUSTDB
# First instance specific parameters
clustdb1.thread=1
clustdb1.instance_name=clustdb1
clustdb1.instance_number=1
clustdb1.local_listener=listener_clustdb1
clustdb1.remote_login_passwordfile = exclusive
# Comment out clustdb1.undo_tablespace and uncomment clustdb1.rollback_segments
# when undo_management=MANUAL
clustdb1.undo_tablespace = UNDOTBS1
# clustdb1.rollback_segments = (rbs1_1,rbs1_2)
# Second instance specific parameters
clustdb2.thread=2
clustdb2.instance_name = clustdb2
clustdb2.instance_number = 2
clustdb2.local_listener = listener_clustdb2
clustdb2.remote_login_passwordfile = exclusive
# Comment out clustdb2.undo_tablespace and uncomment clustdb2.rollback_segments
# when undo_management=MANUAL
clustdb2.undo_tablespace = UNDOTBS2
# clustdb2.rollback_segments = (rbs2_1,rbs2_2)

Remote Desktop Connection Manager can only open 6 sessions at a time on Server 2012

I am only able to open, and view thumbnails, for a maximum of 6 RDP sessions on my Server 2012 box at a time in Remote Desktop Connection Manager (RDCM). If I add more sessions I just get a variety of connection errors for the additional sessions. If I activate
a 7th session one of the existing 6 sessions goes off-line with a connection error message. Sometimes the error says 3334, sometimes the error says 0x8345000E, and sometimes it just says there is a connection error.
I have checked Group Policy on the server to ensure I don't have any settings restricting the number of RDP sessions.
In fact, I will often have 30 or 40 RDP simultaneous sessions opened, I am just not able to view them all in RDCM. I have seen reviews of RDCM with screenshots showing dozens of thumbnails so it seems to be something that's possible to do.
Are there any settings I should make on the server to allow RDCM to connect to more than 6 simultaneous RDP sessions?
Just to be clear, all these RDP sessions are running on the same server. Also, I am just using the trial license for Server 2012 and Remote Desktop Services right now. I don't think that should have an impact, but I wanted to be thorough.

Thanks Jakub for "corflags" info.
Unfortunatelly it doesn't work because running mRemoteNG.exe process in 64bit can't load MSTSC ActiveX component (referenced assemblies) because original files were assembled from 32bit dll [mstscax.dll]?
Error message when making RDP connection:
Could not load file or assembly 'Interop.MSTSCLib, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. An attempt was made to load a program with an incorrect format.
I was able to create new AxInterop.MSTSCLib.dll and Interop.MSTSCLib.dll assemblies from 64bit dll version and now it works with "AnyCPU":-)
http://www.filedropper.com/axinteropmstsclib-mremoteng
Using AxImp.exe and TlbImp.exe didn't worked for me because it creates assemblies in wrong namespace "MSTSCLib" instead of "Interop.MSTSCLib" (AxImp.exe) and TlbImp.exe for changing namespace generated many "marshaled errors"
so final .dll wasn't working.
Adding MSTSCAX.dll reference in Visual Studio directly created correct and functional assemblies. Who don't know how to create 64bit compatible assemblies or don't have Visual Studio, feel free to check linked file.
Hope it helps
P.S. Sorry for possible technical misinterpretation, I am not programmer so creating new assemblies was trial-error process...

Excel Connection Manager suddenly can no longer connect to Excel from SSIS package

During the last 3 months, I used 32 bit SSIS 2008 (v 10.50.2500.0) on an WinXp machine (v 5.1.2600 SP3 Build 2600) to create a package that writes multiple query results (reports) to an excel spreadsheet. Each report is written to a different
tabbed sheet in the same spreadsheet. The package was working just fine until May 9 2013, when suddenly every single Data Flow task with an Excel Destination displayed error icons and raised the following
error message when opening the Advanced Editor:SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005 Description: "Unspecified error". Error at <DataFlow task name>: SSIS
error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager <Excel connection Manager> failed with error code 0xC0202009. There may be error messages posted before this with more
information on why the Acquire Connection method call failed. Exception from HRESULT: 0Xc020801c (Microsoft.SQlServer.DTSPipelineWrap)Originally the error message reported that the Error Code was "0x8000FFFF", but I can't seem
to reproduce that error code since. Now I am only getting the above error message.From the time I created the original package (when it worked fine) until now, I have been using the same computer, writing to a (32 bit) 2010 Excel file in
a local folder. The filename and location have not changed. The ConnectionString has not changed. The Connnection String I am using is Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:\Conversion\Conversion Results_dt01.xlsx;Extended Properties="EXCEL
12.0 XML;HDR=YES;". Now an attempt to create and test a NEW Connection Manager yields me this error. "Test connection failed because of an error in initializing provider. Unspecified error.",  whereas before I had
no problems creating a new connection manager.I checked a second SSIS package, which I also built during the past 3 months, which loads multiple sheets from multiple Excel files to a SQL Server 2008 database holding table. It uses the same
ACE OLE DB 12.0 connection to load the Excel speadsheets and this package continues to work fine on the same workstation.In desparation, wondering if the Microsoft ACE OLE DB 12.0 driver had become corrupt (even though the second package
was raising no errors), I did download and install the Microsoft ACE OLE DB 12.0 driver.  That did not solve my problems with the first package.I need to get this package running again ASAP as it is targeted for UAT testing in a
matter of days. Any help with this issue would be greatly appreciated!

I submitted this issue above and now I am having the same problem again. I am using the same local computer, the same operating system (WinXp v 5.1.2600 SP3 Build 2600) as originally described. I am working with the same SSIS package that
writes multiple query results (reports) to an excel spreadsheet. This package has been successfully executed multiple times, but now I am suddenly getting the same error as follows:
Error at 1ConversionContacts [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
Error at DFlow Write soft deleted duplicate claims to Excel sheet [Excel Destination - write duplicate claim nbrs that have been removed to Excel [61]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method
call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
The package will not run because of these multiple errors (multiple because it occurs on every single excel destination in the package).
I have Run64BitRuntime set to false on the project. I have triple checked that the excel file name (which I created and can access) exists with the correct name in the correct path, which is local on my machine. The file is the same file in the same
location as when the package worked. I am running the SSIS service under my own network login, as I was when the package worked. I have been consistently getting this same error whenever I change my network password without updating the password
in the SSIS service, but I have triple verified that the service is using my latest password. If I try to open and edit the Excel Destination in any DataFlow task I get the same error. I can successfully create a new Excel Connection Manager pointing
to the same excel file. However if I try to assign the newly created Excel Connection Manager in the data flow, I cannot activate the drop down to choose the Excel sheet without getting an 'Unspecified error' message. I then swapped out
the file with its template version, and ensured the name was updated as correct. I still get the same errors.
Oh, and the SSIS package is extracting data from a SQL Server 2008 database with an ADO.net Connection Manager using Windows authentication. I have no problems with the SQL Server connection, it has always worked and still does. It is only
the connection to excel output file which is locally stored on my machine.
Has anyone got any suggestions for me?

How to connect to lined server in SSMS in SSIS connection manager

Hi,
In SSMS (Server name is sqlssisdw1), I have one (SQL Server)linked server name sql4. in that linked server there is DB called rptdb
Now using SSIS I want to use tables in that DB rptdb.
So for this I want to create Connection manager, but for this when I select 'New OLEDB connection' and in that in 'Server Name' when I wrote 'sql4' it is not giving me list of DB. I also tried giving sqlssisdw1 in server name and see if I can see this
rptdb but I can't.
Can you please tell me how can I connect to lined server in SSMS in SSIS connection manager? Thank you.
Vicky

Hi ,
if you are already having access and login credentials to the remote server which is configured in sql4 , you pretty much directly connect to that server from the connection manager instead of going through a linked server. If you still want to connect
through the linked server , you need to establish the connection for SQL Server sqlssisdw1 and then
use a 4 part name query to access the rptdb tables as like below
SELECT * FROM SQL4.rptdb.<schemaname>.Tablename
Best Regards Sorna

How can I find out the server port for a secured FTP site and creating a FTP Connection Manager

I have to create a FTP Task to go out and get the files that our 3rd party vendor will be dropping on a secured FTP site. I have all the credentials to access that Secured FTP Site and have successfully done so through FileZilla.
Now I need to set-up a FTP Task to go out and get their files and in so doing create a FTP Connection Manager. Is there any way I can determine the
Server Port number from the Secured FTP site? I let it default to 21 and tried the Test Connect and it failed.
Thanks for your review and am hopeful for a reply.

Hi ITBobbyP,
SSIS has a built in FTP task, while this only works for the FTP protocol, it doesn’t support SFTP. But there are some free clients like WinSCP and
SSIS SFTP Task Control Flow Component
available in the CodePlex which can invoked from SSIS.
References:
SSIS SFTP Task Control Flow Component approach
WinSCP approach
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to specify finite simulation stop time in VI generated using SIT connection manager

Hello,
I have a SIMULINK model which I want to run on a desktop ETS. I'm following this procedure:
1. Convert the SIMULINK model in a .DLL using RTW build in Matlab. The target of this build is nidll.tlc.
2. Create a host VI with required indicators and map the parameters using SIT connection manager.
3. Configure the DAQ (and then SIT connection manager generated the driver and IO files for me.)
4. Using LV project, run the driver on the desktop ETS and host VI on the host machine.
The code is working fine, without any error.
My question is this: Since in the driver VI, the simulation time is set to -1, which implies "continuous", the simulation goes on until I hit the stop button on the host VI.
I tried changing this default value to some other value. The simulation then does run for the defined amount of time but then I'm getting error 2206.
What is an appropriate way to stop the simulation on the RT target?
Thanks
Gayatri
PS: I'm using LV 8.5, LVRT 8.5, SIT 4.0, Matlab @2007a.

The VI in the Driver VI called SIT Initialize Model.vi has an input called time step (sec) (-1: use model time step) which does what you want it to. It doesn't actually affect the time step of the solver used in the built model DLL, just the rate at which the main base rate loop actually runs in real time. In fact, base rate loop period would be a better name for this control. If you set it, you won't alter your model, but you will be able to adjust the rate of the base rate loop.
Simply create a control from this input terminal on your driver VI and fill in an appropriate period in seconds. Make sure to set this value as default in the control so that the Driver VI remembers it.
You will have to take into account that your model will still think it's running at the time step it was compiled at. So your model simulation time and the actual wall clock time won't match up.
Jarrod S.
National Instruments

Change credentials of Agent Connection Management

Similar Messages

Maybe you are looking for