Is there a way to change fixed width Flat file connection manager to delimited without losing all the column names ?

Is there a way to change fixed width Flat file connection manager to delimited without losing all the column names ?

Unfortunately not as it is a quite dramatic change causing the metadata being refreshed. I would try to open though the package file in a text editor and find them before doing the change, then after you made the change to the FF connector try to reconstitute
/ replace the autimatically generated columns with the old names.
Arthur
MyBlog
Twitter

Similar Messages

  • Hi ive upgraded my itouch to ios 6.1.3 but it keeps crashing ounce i put my passcode in is there a way i can fix this? one of my  friends mentioed downgrading it but the only way isnt supported by apple so i dont feel safe with it so plzz help me

    hi ive upgraded my itouch to ios 6.1.3 but it keeps crashing ounce i put my passcode in is there a way i can fix this? one of my  friends mentioed downgrading it but the only way isnt supported by apple so i dont feel safe with it so plzz help me.
    it has worked fine no problems till i updated it i tried restoring itwith my old backup but it doesnt move the ios back so it just keeps on craching when i try to unlock it

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    Downgrading the iOS is not supported by Apple

  • Is there a way to change my iCloud ID to be my iTunes ID without deleting my iCloud account?

    I don't know my iCloud account password and Its different then my iTunes account. I can't sign into my old email either. Is there a way to change my iCloud ID to be my iTunes ID without deleting my iCloud account?

    No. Sorry. Since you have a different iCloud ID than your iTunes ID, you essentially have two Apple IDs - one for iCloud and one for iTunes. They cannot be merged.
    What is it that you are needing to do?
    GB

  • HT5622 My family has multiple phones on one apple ID. Is there a way of switching it so we each have our own ID without losing everything?

    My family has multiple phones on one apple ID. Is there a way of switching it so we each have our own ID without losing everything?

    Hi ndmulderx,
    If I understand correctly, your family has been sharing a single Apple ID and now you want to give everyone an individual Apple ID without losing any content. You can do this with Family Sharing. The article below provides details about the feature which will allow you to share purchases between family members, create shared photo albums and much more.
    Family Sharing
    Cheers!
    -Jason

  • I lost my phone and i got an unlocked 4s from my gf she used it before an its still connected to her icloud is there a way i can restore my icloud back up to replace hers without messing up the unlock also my latest backup isnt showing on my pc help plz!!

    i lost my phone and i got an unlocked 4s from my gf she used it before an its still connected to her icloud is there a way i can restore my icloud back up to replace hers without messing up the unlock also my latest backup isnt showing on my pc help plz!!

    Please please help me, if you know how.

  • My daughter cant remember her passcode, and she has never synced it.  Is there any way to restore without losing all the apps and music?

    My daughter can't remember her passcode, and she has never synced it.  Is there any way to restore it without losing all the apps and music that were downloaded?

    If you can't remember the Passcode, you need to restore the device from the computer it was last synced with.
    Follow the instructions for putting the device in recovery mode >  iPhone and iPod touch: Unable to update or restore
    If you are a resident of the U.S., have iTunes 10.3 or later installed, and iOS 4.3.3 or later, can re download iTunes purchases for free.
    So retore the iPod, then re download the iTunes media.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • How to add line breaks to output fixed width flat file

    0
    I need to create a Flat file without column headers, no comma separated values but each column will have a fixed starting position and a fixed length in the text file. For example, below is the text file to be created with six columns
    Column1  Column2   Column3     Column4  Column5      Column6
    abc          1             New emp      xxxx         xxxx           
    xxx
    Fixed starting position and a fixed lenth values for these columns as are below;
    Column1 : Starting Position -1, Fixed Length -4
    Column2 : Starting Position - 8, Fixed Length - 2
    Column3 : Starting Postion - 11, Fixed Length - 10
    Column4 : Starting Position -1, Fixed Length -5
    Column5 : Starting Position - 10, Fixed Length - 2
    Column6 : Starting Postion - 15, Fixed Length - 5
    The out put file each line have only 20 characters length.First 3 columns comes in first line and 4-6 columns comes in 2nd line.
    OUTPUT FILE:
    1234   89  11121314151617181920
    12345    1011          151617181920

    BOL says that:
    The Fixed width with row delimiters option is not available in the Flat File Connection Manager Editor.
    If necessary, you can emulate this option in the editor. To emulate this option, on the General page of the Flat File Connection Manager
    Editor, for Format, select Ragged right. Then on the Advanced page
    of the editor, add a new dummy column as the final column of data.
    More details steps:
    http://www.coderewind.com/2012/08/ssis-how-to-include-rowdelimiter-with-destination-flat-files/
    Below blog should make things clear:
    SSIS Flat File Export - "Fixed Width" vs "Ragged Right"
    -Vaibhav Chaudhari

  • HT4847 I changed my iPhone from an IPhone 4 to an iPhone 5. How do I delete my iCloud account on my old phone without losing all the data on my new iPhone 5?

    I changed my iPhone from an IPhone 4 to an iPhone 5. How do I delete my iCloud account on my old phone without losing all the data on my new iPhone 5?

    If you have any photo stream photos on your old phone that you want to keep you might want to save them to the camera roll, then import them to your computer (http://support.apple.com/kb/HT4083) before deleting the account.  The reason for this is that photo stream photos are only kept in iCloud for 30 days.  When you enable photo stream on your new phone you will only receive photo stream photos from the last 30 days as older photos are no longer in iCloud.

  • How can I change a restrictions passcode without losing all the restricted settings?

    We have two iPads for two boys... both are heavily restricted.  One of my boys saw the passcode and I changed it by disabling and then re-enabling restrictions, only to be shocked when ALL MY SETTINGS were reverted to default and DIDNT come back after enabling restrictions again.  How can I change the passcode on the other iPad without losing all the settings, especially the long list of blocked websites?
    Thanks in advance.

    What good would the passcode be if you could bypass it like that?

  • What is the easiest way to read fixed width ascii files?

    There does not seem to be an easy way to read fixed with ascii files in labview.  CSV files and other delimited files are easy, but I cannot think of a simple way to read data from a fixed width ascii file.

    jgkempen wrote:
    There does not seem to be an easy way to read fixed with ascii files in labview. 
    Reading a file does not depend on its contents. Unless the file is gigantic, you can just read it as one big string and parse it later, especiall if you want the entire contents of the file.
     If you only need a subset, you can calculate the offsets and sizes as multiples of your record size. That's the beauty of fixed size records.
    It is typically not efficient to read a file in a loop, small portions at a time, so I would not recommend that except in some very specific situations.
    Could you be a bit more specific on what exactly you need to do? Is your problem with reading or with parsing the fixed sized records? Could you attach a sample file and some description on what you need to read from it.
    Message Edited by altenbach on 09-05-2007 07:50 PM
    LabVIEW Champion . Do more with less code and in less time .

  • I deleted iTunes from my PC, is there any way i can sync my phone to a newly downloaded iTunes without losing my music that wasn't purchased from iTunes?

    BACK-STORY
    I recently was given a new iPhone 4S from the Apple Store, I synced it to my PC when I got home and got everything back.I had to uninstall a download of windows 8.1 back to the original windows 8 in order to install an anti-virus software. The only way to uninstall Windows 8.1 is basically a factory reset, by doing so I lost everything that wasn't saved in cloud or external drive.I downloaded iTunes again, signed in and the only thing I could find was the music that I purchased from iTunes. I don't want to connect my phone to the iTunes I just downloaded,because I think I'm going to lose all the music that's already on there, minus the music I bought from iTunes. It's a lot of albums and it took me a while to collect them all too.
    WHAT I WOULD LIKE HELP WITH PLEASE
    Can I transfer the music on my phone to some type of storage?
    USB memory drive
    Cloud ex. Skydrive, Google Drive, Dropbox etc
    Store somewhere on my PC. (I know I can't sync from my iPhone to iTunes.)
    If it is at all possible to store the music that's already on my iPhone using another method,such as the ones I've mentioned or haven't,can I then transfer it to iTunes?
    If there is no way to save my iPhone's music library, then when I rebuild it is there a way to store it, that if the same thing was to happen I wouldn't have to go through this process?
    Also, any other tips or advice would be greatly appreciated.
    THANKS IN ADVANCE TO ALL!!

    The syncing of music is one way, computer to phone. See this helpful document from a fellow user. Credit goes to the author.
    https://discussions.apple.com/docs/DOC-3141

  • How to fix 3G/VVM/MMS problems in 4.0 WITHOUT losing all of your data

    First off, I can't take credit for this. tekset21 on these forums mentioned trying a restore from DFU instead of straight up and that's when I started experimenting the last few hours.
    I've tried this twice. It worked the same exact same way. I'm guessing it will work for you as well.
    1) Make sure you have a backup to restore to that will work. For me, this was the backup I made just before I upgraded to 4.0 yesterday.
    2) Put your phone into DFU mode. To do this, you basically connect to iTunes, Hold down both the top button and the home button for 10 seconds, then release the top button but keep holding the home button until a window pops up in iTunes saying it's discovered a phone in iTunes in restore mode. If you need more help google "DFU mode" - there are tons of videos.
    3) Restore using the regular restore button. Wait for the iPhone to finish reapplying the 4.0 software and reappear in iTunes
    4) Click set up as a new phone and then continue. I personally sent myself an MMS, verified the 3G data connection was working by using maps, and played around with my voice mail until it asked me for a password and eventually showed me my visual voice mail.
    5) Finally I restored to the backup I made yesterday. Everything was there like a normal restore (kinda).
    NOTE: Whenever I did this the first time it came back from the restore with no SMS icon. I cannot explain this. I could receive a SMS, I could send one. The MMS worked fine too. The icon even showed up in the task drawer- just no icon on the home screen.
    Tried the above 5 steps a second time and said "what the ****" and just rebooted my phone- the SMS icon appeared. Went through all the motions again (third time) and the icon appeared again.
    6) Reboot your phone (if you haven't already).
    Doing all of the above got me my phone to exactly where it was before i updated yesterday. I wish I could test this and restore it with the backup I made right before I started doing this tonight (get my messages from today back) but iTunes does not give me the option of doing so. I don't know why- I can see both backups and their timestamps but iTunes just isn't giving me that option.
    Hope this helps.

    THIS FIX ALSO WORKS FOR THE EXCHANGE SYNCING PROBLEM!!!
    THANKS!!

  • Hi Gang! Ive just bought a computer and I want to sync all my music from my Iphone to the itunes I've just intalled on it. Can this be done without losing all the songs? no way am I paying for them all again! Thank you

    Hi Gang! Is there any way of getting my songs from my Iphone to my new computer just by syncing rather then having to pay for them all again?? thank you

    Hey baby birch
    You are able to sync purchased content from your iDevice to a new computer as long as the comptuer is authorized
    To authorize the computer follow these steps
    At the topi of the screen next to File- Edit -View, click store then Authorize this computer.
    Enter in your appleID email address and password and click authorize
    **If you do not see the File Edit View option, At the very top left corner you should see a little square click the square and click show menu bar.
    Now that your computer is authorized click the file menu button, then click Devices, then go to your iPhones name and then click Transfer purchases this will allow you to transfer all of your purchased content to the computer
    Now if you want to transfer your non purchased content to the computer you can do so if you have wif and the previous computer on the same network as the new computer with home sharing
    Understaning home sharing - http://support.apple.com/kb/HT3819
    Setting up Home sharing - http://support.apple.com/kb/HT4620

  • Is there a way to sync my music from my ipod to a computer without deleting it, the original computer i had it on crashed and i really dont want to lose all my music

    My computer that i had my itunes crashed and i wanted to know if there was a way to transfer my music from my ipod to a new computer without completely having to resync every cd. I already have the purchased music transfered.

    The music sync is one way - computer to ipod.  The exception is itunes purchases:  File>Transfer Purchases
    It has always been very basic to always maintain a backup copy of your computer for just such an occasion.  Use your backup cppy to put everything back.

  • Is there a way to see if "snap to grid is on"...without going to the menu?

    I have been working on tutorials and many of them require turning "snap to grid" on and off many times throughout the illustration creation process. I am easily using the keyboard shortcuts. But often I forget if it is toggled on or off. As of now I have to go to the top drop down menu and see if it is checked or not. Is there some reference in the main work area that shows the status of this feature (on or off)? It seems so awkward going to the menu dropdown each time to see this.
    ~Thanks

    not that I know of, but you can cheat by creating a square that turns green when Snap is on and it turns Red if Snap is off
    1. create a square
    2. give it a note, "SNAP" for example
    3. record an action to turn Snap to grid On and change the square to green, give it a shortcut, "F2" for example
    4. duplicate the action and edit it to change the square to Red, give it a shortcut, "F3" for example
    that's it, if you need help with actions, feel free to ask.

Maybe you are looking for