Change cut/paste to control keys?

Hi,
I do a ton of work in Parallels under WindowsXP. I mostly write code and use cut/paste (control x or c/control v) continuously.
As much as I love the mac I find when I go back to OS X say for email I'm doing control x or c instead of command x or c.
Is there an easy way to change my Mac OS X cut/paste keystrokes to be control X, C, and paste as control V?
Thanks...

You might look into DoubleCommand.
With it installed you have the ability to remap your Command and Control keys, plus a lot more.
Good luck!
Andrew99
iMac 1 GHz Flat Panel 15" PPC 768 MB RAM Mac OS X (10.4.9)

Similar Messages

Mass change for field Confirmation control Key in PO / SA

Dear All,
There is a need to do mass change in value for field Confirmation control Key in PO / SA. Some of them have PO history. If we have PO history system wont allow to change conf. ctrl key. Also since it is a production system we can not cancel previous po histories. This is in SAP 4.7 where we dont have mass change tcode for Scheduling agreements.
Can we maintain the values thru table entries. like using se16n maintain entries check box. This option is greyed out. can we activate that & do this requirement.
please suggest.

hi Greetings!
The confirmation control key can not be changed in the scheduling agreement if GR for item had already been posted. If the GRs can be canceled , it is possible to change the confirmation control in the SA item.
Version 4.7 do not support Mass change of scheduling agreements, hence you have to either create a SCAT or BDC to perform the task.
Gobinathan G

Change Confirmations with Confirmation Control Key AB Possible?

Hi!
In PO a quantity bigger thatn the ordered qunatity has been confirmed. Now when I modify the confirmed quantity in the confirmations tab to be equal to the ordered quantity, I still get the error message "Notified quantity exceeds the ordered quantity". How can this be solved?
Regards,
Ileana

Hi
Please change the message ME 161 setting from Error to warning in SPRO-> Materials Management-> Purchasing-> Environment Data-> Define Attributes of System Messages
Thanks & Regards
Kishore

HELP! Is there a way to change column information in iTunes such as name of artist, genre etc, other than deleting them one at a time? Such as the way you delete an entire group of songs by holding down control keys or selecting the Select All command.

HELP! Is there a way to change column information in iTunes such as name of artist, genre etc, other than deleting them one at a time? Such as the way you delete an entire group of songs by holding down control keys or selecting the Select All command. Thanks.

If you select all the songs you want to change, Be it one song or an akbum, or an Artist, Or Genre, or playlist. Then Right mouse click and Get Info. You then get a slightly different from normal Get Info box as this is the One for Multiple items.
In there have a look at the tags and see if the one you want to changes is in there. There are a few tabs so if for example you wanted to change the Media Type from Home Movie to Movie go to the Options tab and select Movie and OK and it will change the whole selection.

How to change the Purchase requisition when control key is PP02

Hi Exports:
I want to change the purchase requisition which was created after production order was released . The control key is pp02.
I changed the purchase requisition in OPJP .but I got an error .
the error message is
" Acct. assign. cat. "Q" for purchase req. Project Stock does not exist. "
I don't know what should I do . would you like to give me some advice? thank you very much.

Hi, Umesh:
     Picture1 is my OPJP initial screen ,I want to change to be Picture B . but I got an error .
     In fact , I don't have project stock . but I have sales order stock.
     I try to change 'Q' to other option . but I got the same error.
picture 1
picture 2

Have to hold down mission control keys, when did this change?

I have my mission control keys (show windows in app, show all windows, and show desktop) set to use the F10, F9, and F11 keys without function keys.
Recently (as in five minutes ago) I noticed that the keys are no longer behaving like they used to. I now have to hold those keys to use any of those functions, basically making them useless because now my hand is occupied with that instead of using the trackpad.
Is there some update that happened that caused this change or is it just a product of some setting getting changed? I never noticed a setting for this in the System Preferences.
Computer: late 2008 unibody Macbook, 2.5 GHz, 4 GB RAM, running Yosemite 10.10.2.

Actually just solved my own problem.
Used killall Dock according to instructions here: https://discussions.apple.com/thread/3831445
and everything is now working as normal again.

PO User Exit to change confirmation control key

Hi All,
I have to hard code the confirmation control key to a constant(e.g 0006, where the value doesnt exist in Confirmation Control Key table T163L) for a particular Order Type while creating/ changing a PO through Tr. ME21/ME21N or ME22/ME22N.
Is it possible to do so using UserExits
Appreciate your Help.
Regards,
Anbalagan

Hi ,
I dont think you can change the control record of any IDOC .
If you look at an example Function module MASTERIDOC_CREATE_CREMAS , used to create Vendor IDOCS ,
the call customer-function has only the idoc data record as tables parameter .

Changing Control Keys on Equium series

Hiya,
Newbie here, I've found this forum very useful for answering pretty much all my questions but I just wondered if there was any way if changing the programs that open up when I use the control keys on the left hand side of my laptop?
Theres 4 keys to the left handisde - internet, play, pause, stop, next, back and then windows media centre. Basically I wanted to know if there was a way of changing the windows media key, to open ITunes instead?
Thanks in advance
Matt

Hi, I am trying to do that same as Matt, I have been looking around and found some things that seem to suggest you can on some models:
http://www.laptopvideo2go.com/forum/index.php?showtopic=5977
This hasn't worked for me though, as I can't get the right Toshiba Button Controls menu in the Console, there are no options for Audio buttons, which is weird because I only have audio control buttons, and no program launching buttons! So can anyone suggest somewhere to get the right Button Controls menu for an Equium L10-300? Either that or is there a way to just stop WMP from opening when I press the Play/Pause button by editing the registry? That would do for me as I'm running Foobar, which can be configured to be controlled by the control buttons anyway, because it's awesome.
Cheers,
Tom

Why does my firefox intermittently (and seemingly randomly) behave as though my control key is stuck on, even though my keyboard behaves normally in every other program? AND it will also randomly change my keyboard mapping to an international one.

I will be using firefox, and for some reason, it behaves as though control key is being held down. If i use the mouse wheel, the page zooms. If I press the letter 'o', the "Open file..." dialog opens. But I'm not holding control. If, while this is happening, I switch to another application like Notepad, it behaves normally. But then I'll go back to firefox and the problem is still there. It seems to randomly start and stop.
Also, in a possibly related problem, my keyboard mapping will change from my default US to some other foreign mapping where shift-6 incorrectly outputs '?' instead of '^', for example.

I will be using firefox, and for some reason, it behaves as though control key is being held down. If i use the mouse wheel, the page zooms. If I press the letter 'o', the "Open file..." dialog opens. But I'm not holding control. If, while this is happening, I switch to another application like Notepad, it behaves normally. But then I'll go back to firefox and the problem is still there. It seems to randomly start and stop.
Also, in a possibly related problem, my keyboard mapping will change from my default US to some other foreign mapping where shift-6 incorrectly outputs '?' instead of '^', for example.

Control key copy and paste, etc., not working

I have just purchased a T440S Thinkpad. I am alarmed that Ctl + C and Ctl + V do not work. Also, I cannot use the Control key in combination with + and - to zoom in and zoom out. The Control key in combination with the letter i does not italicize a blocked word. Does anyone have a solution to this problem? Will Lenovo technicians be able to provide a fix for this serious problem? David

Is this the case for both CTRL keys (you have a CTRL key on each side of the space key) or is one of them working?
If the right CTRL key is working and the left CTRL key isn't, are you sure you didn't swap the Fn and CTRL key in BIOS?
-gan

Mid 2009 13" won't start up, SMC impossible due to control key change?

Inherited mid 2009 13", all was well but control key wouldn't function, I used sys prefs to reset it to caps lock. Good for a few weeks. Last night it wouldn't take a charge, I have several bricks, it would recognize any of them when plugged in but wouldn't take a charge so tried a SMC reset. But since the control key was inop, reset to cap lock but even so SMC reset seemed to work as it started taking a charge again. Now this morning it would not turn on and nothing I do seems to convince it start to boot. Advice?

I decided to pull the battery as if it were a removable battery model. Worked! Booted it. Accepting charge. Will keep my eye on it.

Control key no longer works after update.

After updating Lion the control key no longer works. It beeps when pressing control and then a number key but nothing happens.
This is left control key though. Right still works?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search.
Step 1
Copy or drag -- do not type -- the line below into the Terminal window, then press return:
kextstat -kl | awk ' !/apple/ { print $6 $7 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Step 3
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
Step 4
ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
You can then quit Terminal.

Confirmation control key check for inbound delivery creation

Hi,
Currently, in the Client's company, the process of receiving goods from purchase orders looks like that (SAP-wise):
- create a purchase order,
- receive goods using MIGO and automatically create an inbound delivery,
- pack the delivery and post goods receipt.
Recently, some patches have been installed, including one described by note 1602047 (which basically enforces checking confirmation control keys if goods receipt assignment and goods receipt relevance are activated for inbound deliveries). Note says that it only affects two-step stock transfer and creation of automatic inbound deliveries using SPED output but it seems it also affects other basic processes like PO receipt in MIGO.
Now, when using the old control key (that had MRP-Relevant and GR-Relevant fields checked), the system is unable to automatically create an inbound delivery after the goods receipt is posted with MIGO (with message VL148 - Not possible to create an inbound delivery). I learned that this is because the "GR Assignment" field must be checked in the confirmation control key so it's possible to automatically create aninbound delivery after receiving a purchase order in MIGO.
After changing the confirmation control key to have the missing field checked it's not possible anymore to receive goods from PO in MIGO as the PO requires shipping notification in order to be processed in MIGO thus requiring of manual creation of an inbound delivery.
Is there any way to skip this check so the process would remain the same (this model has been working fine for few years in the Client's system) and the inbound delievery would be created automatically after posting the receipt in MIGO?
Thanks in advance,
Piotr

Hi,
don't know if you found a solution, but we received the following message from SAP:
The advent of the new version requires some attention to the users. It
was necessary to avoid inconsistencies which in the past version the
system was susceptible.
Main Program SAPMM07M
Source code of MM07MLVS
sy-msgid VL sy-msgty E sy-msgno 148
I have checked the process and through debugged I could confirm the
following information SAP is providing to all similar incidents reportedfor us:
Error message VL 148 is issued if in the confirmation control key used
in the purchase order, the fields for MRP-relevance (T163G-KZDIS),
GR relevance (T163G-WEREL) and GR assignment indicator (T163G-WEZUO)
are not set.
The correction of note 1602047 was necessary to avoid inconsistencies
(table EKES) in the purchase order. Without having the GR assignment
(T163G-WEZUO) set, there is no unique reference created between the
purchase order history (table EKBE) and the inbound delivery
confirmation (table EKES) at goods receipt which leads to a problem if
several inbound deliveries exist for the same purchase order.
If you set T163G-WEZUO to 'X', this assures that, for an inbound
delivery, the confirmation record (EKES) belonging to this inbound
delivery (EKES-VBELN) is also accurately updated at goods receipt.
How to solve the issue?
Use a confirmation control key with the GR assignment indicator set
and then create the inbound delivery with VL31N. If you want to be able
to create the inbound delivery with reference to a certain line item in
the PO, use transaction VL34.
If you still want to use transaction MIGO, there is the following
workaround:
- Create a purchase order without any confirmation control key
- Create a goods receipt (GR) in transaction MIGO with reference to this PO and post the GR to a non-HU-managed storage location
- Create a transfer posting with MIGO using movement type 311 to
transfer the goods from the non-HU-managed storage location to the
HU-managed storage location.
As the transfer posting is an additional step for the user, the whole
process could be automated using a partner storage location
(T001l-PARLG) for the GR which then triggers (through a modification)
the BAPI 'BAPI_GOODSMVT_CREATE' to create the transfer posting without
user interaction.
I hope to have satisfied you on the reason why it is now happening and
also I believe you can explain to business that it is a new behavior
necessary done from SAP side to avoid worse situations, we are aware of
potential dissatisfaction it might cause. SAP Support is always
available to clarify any issue.
Sorry for not having a more positive answer.
I hope it helps!
Leentje

Cut/Paste from Word to Illustrator CS3 for Mac suddenly not working

This issue regards Illustrator CS3 for Mac on a Mac Pro with 6 GB.
Exactly one week ago I created a number of Illustrator files by cutting charts from a Word 2008 document and pasting them into an Illustrator document.
In the past I have dragged the images (or clip art) or simply used Control-C or even Control-X, but by whatever method I opted for, getting the image from Word to Illustrator CS3 has not been a problem.
Yesterday I got a new chart and a request to replace an old image - one that I had created last week on Tuesday by the Drag/Drop or Cut/Paste method.   For reasons I can't begin to imagine the process simply won't work now.
I also find that if I simply select text in a Word Document, hit Ctrl-C and then try a Ctrl-V in Illustrator I don't get to see my text pasted in - ONLY if I already have a text block open and the cursor in place will I get to see the text copied over into Illustrator. This is very strange and not at all how things have worked in the past - typically I would see the new Text Object just appear, and then I could move it to wherever I wanted.
I have opened up a number of old files that I know were created with copied text and also opened the associated Word files (earlier versions of Word) and again find that I can't copy text over, or even move images over - even though I clearly could do this before. I have also tried entirely new files - also with no success.
I was at an Apple one-to-one session this morning and they were more than mystified by this. I can Cut and Paste into Adobe Photoshop Elements, but I can't even cut and paste from Adobe Photoshop Elements into Illustrator CS3.   I can drag the Photoshop file (from the Finder window) into the Illustrator document and poof - get my image that way, but it's as an image only. If the base image in question is a vector image or something else having a plurality of elements, I can't then select the elements in Illustrator to change their color, delete them, or otherwise play with them.
I have brought up a word document on another Mac system that also has Illustrator CS3 and find that it too can't drag/drop cut/paste between the two applications.   At Apple, we did confirm that such ability is operational in the new Illustrator CS4, but none of their store systems still have CS3 to provide yet a third system to test.
I have deleted my Illustrator CS3 preferences, tried flushing the p-ram, and of course run fix and repair permissions - no dice.
My Mac systems update daily and there is nothing in the main update log that shows anything for Adobe or Office (nor do I think there should be). Adobe Update reports that everything is up to date, and I don't see a history file to know what might have changed in the last week.   Office also reports fully up to date and happy.
As I can cut and paste the images into an email for Mail and into Photoshop, I am fairly certain that it is NOT a Microsoft Office 2008 issue. The fact that another Mac with Illustrator CS3 also can't cut and paste suggests that is is really not something personal to my main system.
It is almost as if this is some clandestine "update" intended to encourage me to buy Illustrator CS4. Given that I bought Illustrator CS3 less than a year ago, I really am not eager to buy the new version.   The greeting on the Adobe Support page that CS3 is no longer the current version and therefore supported was most annoying.
I am really hoping that someone out there has an idea of what to try changing, removing and/or adjusting with respect to Adobe Illustrator CS3.

I tried the Select by Path option - can't believe I missed it - and found it made no difference.
I actually uninstalled and reinstalled the whole app. When I tried to simply re-install (can't remember it's exact phrase) it got part way through and then demanded another disk - but I only have one DVD with the application - the extra DVD is for tutorials and it didn't accept that one either. So I restarted that process and chose to completely uninstall. Then reinstalled - hey with only my one disk - gee, just like the first time.   And then it seemed to work.
I was not aware of the save as PDF option - but yes I have Adobe Acrobat Pro 9 for Mac so that option is there - and it seems to work too.
There were of course a slue of updates, and I let them all proceed - but even with them all in place the system is fine and I can once again drag and drop / cut and paste things back and forth.   I just tried a text block and "The Quick Brown Fox" pasted in with a clipping mask about 10 times the size of the document, but other than that it was ok.
So I have things working again on my primary system.   Will try and figure out what's wrong with the other one - but a reinstall might be the easiest game there too.

Apple Mail Cut & Paste Problem...

I have a problem with Apple Mail when I cut some text and paste it somewhere else within the message it doesn't go in where the cursor is located! Instead it pastes into what appears to be a random place elsewhere in the message usually at the start of the line or paragraph.
It's really strange and completely unfathomable. The only solution I've found is to put in a couple of returns paste it in to the message then move the cursor up and delete the newly added line breaks.
I thought it might be a font issue so I changed my default font from Arial to Trebuchet and it's still doing it. This doesn't appear to happen in any other application.
This is not exclusive to Snow Leopard as it does it on my Mac at home which is running Lion.
Any advice gratefully received.
David

David -
I have also been experiencing this oddball aim issue when attempting to insert clipboard contents into a specific point in Mail. I am writing to lend credence to the contention that this is an Apple Mail issue that really should be fixed. Apple started the cut & paste revolution and the fact that one of their key software packages cannot paste properly strikes me as a bit ludicrous.
This started happening on both my iMac and MacBook Pro a few months ago. It could be that it correlates with my use of three different styled signature files for three different e-mail accounts (I hadn't thought of the connection, so thank you, I had been wondering if they had altered something in one of their many security updates).
I desired that the body text of my e-mail default to something different from the style of my signature files. Mail is fairly limited in this area, so I include a top line my signature file that has the right style for my body text. Now I start all messages by overwriting that styled text, so my message font is as I want it. Is this the source of the problem?
The inability to place text correctly isn't restricted to pasting something in via clicking on a particular spot in the e-mail. Odd things also happen if you use the directional arrow keys to move the cursor around with the keyboard and then command-V, or if you drag text to a certain spot, and when you release, it refuses to go there.
There's some logic to the mistakes. The text is almost always placed a couple of lines above where the insertion point is blinking, and you can fool Mail sometimes by placing text in the middle of a bunch of new returns and then deleting the surrounding lines, but this is cumbersome and annoying.
I hope Apple reads this, because it got so annoying that I switched to Outlook (Office 11) and it's terrific in some of the areas where Mail falters (work e-mail is Exchange). About the only thing that Mail does better is access my MobileMe folders much more quickly.
Come on, Apple!

Change cut/paste to control keys?

Similar Messages

Maybe you are looking for