Change Department after the Discrete Job got Completed

Hi All,
Please let me know how to change the Department (in Operations) even after the Discrete Job got completed.
This is in Oracle Applications (11.5.10),Oracle Work in Process module.
Thanks a lot.

You will have to undo completion, then undo every operation step (including resource transactions), modify the resource requirements to 0, add new operations and resource requirements and take the job thru' completion.

Similar Messages

Email Notification after the backup job is complete

I have the email working and it sends email after the differential and full backup is complete but I have added the logfile backup but it does not append to the same email. I did not write all the steps when I configured 1st time and I am screwed now. I
have the database mail setup. Is that enough to send email after the job is complete. I want to email to read the path of the backup. I have done restart of the sql aAgent too but no luck. I have followed instruction on the following
http://www.kodyaz.com/articles/sql2005-database-mail.aspx
http://www.howtogeek.com/howto/database/sending-automated-job-email-notifications-in-sql-server-with-smtp/
http://www.databasejournal.com/features/mssql/article.php/3626056/Database-Mail-in-SQL-Server-2005.htm

Did you select "Enable Mail Profile" in SQL Server Agent properties? More details
here
Pradeep Adiga
Blog: sqldbadiaries.com

After the latest update was completed, I couldn't open the firefox browser. I received an application error. I tried restarting the Windows OS but no change. How do I fix this?

After the latest update was completed, I couldn't open the firefox browser. I received an application error. I tried restarting the Windows OS but no change. How do I fix this?

If not this:
http://www.mcelhearn.com/deleting-the-itunes-album-artwork-cache-folder-may-reso lve-problems-with-album-art-displaying/
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

XDC - print a empty page after the print job

Hi Folks,
i have a problem. i use a xdc file to select multiple trays and after the printing job an additional separator sheet should be "printed" . Its only a empty sheet, which should be at the end of the printjob.
Could somebody give me a hint? I checked the pcl commands and i got the idea to send a line feed and carriage return command, but im not sure whats happen and if this is possible, could i select the tray for this?
Thanks a lot for any Idea or Tip,
kind regards
Alex

Wasil, thanks for the response, but i havent found any info to do a separator sheet in this link. I know that i have to do this in the xdc, but i dont know how. I found a plc command to do this, but the problem is that i not understand how to fill this in the xdc.
Here ist the Part from my XDC File. Ok, its possible that this is at the wrong point, but im sure i have an error in the escaping.
The Printer i use is a Ricoh MP5002sp. I only found the escaping like i did, but i get a pdf generation error with this part:
   <seq id="postDoc"><ESC/>%-12345X@PJL RDYMSG DISPLAY=""
<ESC/>H1B\L%-12345X@PJL ENTER LANGUAGE=PCL
<ESC/>H1B\L&l4H
<ESC/>H1B\L&l1T\0
<ESC/>M\B\S\N\U 
<ESC/>U\LJob : \I
<ESC/>U\LDate: \D
<ESC/>U\LTime: \T
<ESC/>E
</seq>
The PLC commands i foun on a website looks like this:
\H1B\L%-12345X@PJL ENTER LANGUAGE=PCL    <-- Puts printer into PCL mode
\H1B\L&l1H    <-- This command pulls the sep sheet from Tray 2
\H1B\L&l1T\0    <-- Job Reset. Sets USTATUS counters etc,
\M\B\S\N\U    <-- Prints user name in large characters
\U\LJob : \I    <-- Prints spool ID number
\U\LDate: \D   <-- Prints date
\U\LTime: \T    <-- Prints time
\E    <-- Exits banner page and begins actual print job
But in my case it will be enough to select the tray and "print" the empty sheet...
thanks a lot for your your help...and it could be a easy task...but it looks like im a "dau" :-)

How to do move transaction if the discrete Job is already closed during per

Hi all
My client is facing the issue.
The Discrete jobs are closed even teh job are completed,still move transactions are balance.
We are not seeing any data in pendingtransaction since all are cleared during period end closing
Could you suggest how to overcomr this issue
Client want to complete the job
Thanks and advance
VKPK

Pl clarify in more details -
The Discrete jobs are closed even teh job are completed,still move transactions are balance. - when u say the jobs are completed how then the move transactions are pending.? ..........................if its physical and not logical , then please open the jobs increase the qty and complete the pending move transactions. If you have closed the jobs and the period is still not closed , then you can proceed opening the jobs to complete the unfinished transactions.
Pl revert so that we can proceed further with the solution.
Domnic

While updating my iphone 4s to ios6, I had to restore it. Now every time I connect to itunes, I get the "Set Up Your iPhone" window with the set up as new iphone and restore from backup options. After the restore, I got everything except my apps back.

While updating my iphone 4s to ios6, I had to restore it. Now every time I connect to itunes, I get the "Set Up Your iPhone" window with the set up as new iphone and restore from backup options. After the restore, I got everything except my apps and music back. Do I need to set the phone up as new again?

Hi Vidbrent,
If you are having issues updating or restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden

Changing Layouts After-the-fact

Hi All-
I am rebuilding my company's website on our server where
previously it was outsourced, designed and hosted by another
company. I feel that this is a huge undertaking ... and my boss
thinks it should be easy. He wants me to look at the site that is
online now and transfer the images, info, etc over to Dreamweaver.
Anyone have any advice?
Anyway, my question is this:
When I started building the homepage I used the the
"twoColLiqHdr" page layout (where the sidebar is on the left and
the paragraph content is on the right). I want to change this so
that the sidebar is actually on the right and the content on the
left of the page. Can I change this since it is after the fact? If
so, how?
Thanks.

This is a multi-part message in MIME format.
------=_NextPart_000_0024_01C97FAA.A1ADCE60
Content-Type: text/plain;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
If you used a Dreamweaver template, you can modify the
template and =
update the child pages instantly. If you didn't, I would
recommend you =
create a Dreamweaver template with the styles you wish and
use Apply =
Template to page to update the child pages. You will probably
have to =
adjust some of the content accordingly.
--=20
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: Dreamweaver CS3: The Missing Manual,
DMX 2004: The Complete Reference, DMX 2004: A Beginner's
Guide
Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web =
Development
"lorentza" <[email protected]> wrote in
message =
news:[email protected]...
> Hi All-
>=20
> I am rebuilding my company's website on our server where
previously it =
was=20
> outsourced, designed and hosted by another company. I
feel that this =
is a huge=20
> undertaking ... and my boss thinks it should be easy. He
wants me to =
look at=20
> the site that is online now and transfer the images,
info, etc over to =
> Dreamweaver. Anyone have any advice?
>=20
> Anyway, my question is this:
>=20
> When I started building the homepage I used the the
"twoColLiqHdr" =
page layout=20
> (where the sidebar is on the left and the paragraph
content is on the =
right). I=20
> want to change this so that the sidebar is actually on
the right and =
the=20
> content on the left of the page. Can I change this since
it is after =
the fact?=20
> If so, how?
>=20
> Thanks.
>
------=_NextPart_000_0024_01C97FAA.A1ADCE60
Content-Type: text/html;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Dwindows-1252">
<META content=3D"MSHTML 6.00.6000.16788"
name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT
size=3D2></FONT> </DIV>
<DIV>If you used a Dreamweaver template, you
can modify the =
template and=20
update the child pages instantly. If you didn't, I
would recommend =
you=20
create a Dreamweaver template with the styles you wish and
use Apply =
Template to=20
page to update the child pages. You will probably
have to adjust =
some of=20
the content accordingly.</DIV>
<DIV> </DIV>
<DIV><FONT size=3D2><BR>-- <BR>Nancy
Gill<BR>Adobe Community=20
Expert<BR>Author: Dreamweaver 8 e-book for
the DMX=20
Zone<BR>Co-Author: Dreamweaver MX: Instant
Troubleshooter (August, =
2003)<BR>Technical Editor: Dreamweaver CS3:
The Missing=20
Manual,<BR> DMX 2004: The Complete
Reference, DMX 2004: A =
Beginner's=20
Guide<BR> Mastering Macromedia
Contribute<BR>Technical Reviewer: =
Dynamic=20
Dreamweaver MX/DMX: Advanced PHP Web
Development<BR></FONT></DIV>
<DIV> </DIV>
<DIV><FONT
size=3D2></FONT> </DIV>
<DIV>"lorentza" <<A=20
href=3D"mailto:[email protected]">[email protected]=
</A>>=20
wrote in message <A=20
href=3D"news:[email protected]">news:gll2p1$p4c$1@forums=
.macromedia.com</A>...</DIV>>=20
Hi All-<BR>> <BR>> I am
rebuilding my company's website on =
our server=20
where previously it was <BR>> outsourced,
designed and hosted by =
another=20
company. I feel that this is a huge <BR>>
undertaking ... and my boss =
thinks=20
it should be easy. He wants me to look at <BR>>
the site that is =
online now=20
and transfer the images, info, etc over to <BR>>
Dreamweaver. Anyone =
have any=20
advice?<BR>> <BR>> Anyway,
my question is this:<BR>>=20
<BR>> When I started building the
homepage I used the the =
"twoColLiqHdr"=20
page layout <BR>> (where the sidebar is on the
left and the paragraph =
content=20
is on the right). I <BR>> want to change this so
that the sidebar is =
actually=20
on the right and the <BR>> content on the left
of the page. Can I =
change this=20
since it is after the fact? <BR>> If so,
how?<BR>>=20
<BR>> Thanks.<BR>>
</BODY></HTML>
------=_NextPart_000_0024_01C97FAA.A1ADCE60--

Production relief : Discrete job (over completion) not consume MPS Schedule

Dear All,
The case :
I have already create MPS schedule. detail schedule is :
item A
1 Nov : 100 pcs
2 Nov : 100 pcs
3 Nov : 100 pcs
And i have discrete job for 1 nov is 20 pcs. Job status is release.
Then i check my schedule MPS is :
item A
1 Nov : 80 pcs >>> already consume 20 pcs
2 Nov : 100 pcs
3 Nov : 100 pcs
in the same day user have completed and close that job for 30 pcs. (its mean overcompletion 10 pcs)
Then i check my MPS is :
item A
1 Nov : 80 pcs >>> Why 10 pcs for over completion not consume my schedule???
2 Nov : 100 pcs
3 Nov : 100 pcs
Anyone explain this?
Thanks
The Pooh

Hi DST
This is a great effort and gesture. thank you on behalf of all the newbies.
PJ

Need to Trigger a Program in ECC after the DSO load has completed

HI Experts,
I have scenario where i need to trigger a Program in ECC after the load to DSO has been completed successfully. Basically opposite of the everyday scenario.
Can i still use the the RSSM_EVENT_RAISE FM in the program to call the event in ECC.
If the above is true.Do i need to have code in the program to confirm the DSO has been loaded or can i just have the program (which basically calls the FM RSSM_EVENT_RAISE) appended to the process chain after the DSO Activation?
Appreciate your advice

Hi,
To help future proof your solution, lean towards using the process chain as much as possible.
A "Green/Success" only link from the DataStore Activation process variant to an ABAP Program process variant will work nicely. It will also still allow your program to be executed by other scenarios (like manually because you want the event raised now without any dependency on the DataStore status).
SAP now recommends you use the CL_BATCH_EVENT class and it's methods to interact with the system events. Use transaction SE24 to review the methods and parameters available and then use the sample code below to test your solution.
Here is a starting point for coding that is used within an ABAP Program process variant in a process chain.
Use transaction SE38 to store this code to be called by the ABAP Program process variant.
constants:
c_interrupt_eventid   type btceventid value '[Event]',
c_interrupt_eventparm type btcevtparm value '[Parameter]'.
data:
l_interrupt_eventid   type btceventid value c_interrupt_eventid,
l_interrupt_eventparm type btcevtparm value c_interrupt_eventparm.
call method cl_batch_event=>raise
EXPORTING
    i_eventid                      = l_interrupt_eventid
    i_eventparm                    = l_interrupt_eventparm
EXCEPTIONS
    excpt_raise_failed             = 2
    excpt_server_accepts_no_events = 3
    excpt_raise_forbidden          = 4
    excpt_unknown_event            = 5
    excpt_no_authority             = 6
    others                         = 1.
if sy-subrc <> 0.
message e051(rsar) with 'Failed to raise background event.' c_interrupt_eventid c_interrupt_eventparm.
endif.
Note: The error message is process chain friendly and will appear in the RSPC transaction GUI and system logs.
Hope this helps,
John.

My MacBook won't go passed a grey screen and the apple logo . It has a loading bar but doesn't do anything and just shuts down after the loading bar is complete... HELP!

Please please help! I'm a college student taking finals. Need it fixed asap

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 3
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 4
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 5
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 6
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 7
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 8
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 9
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 10
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 11
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Can i connect an external display using HD3000 after the discrete gpu has stopped working?

Say for some reason the HD 6490m is fried and I can only use the HD 3000; will I be able to connect the laptop to an external 1080p display via thunderbolt?
Technically it should work, i know. But i've tried it with gfxCardStatus 2.3 and nothing happens until i allow the radeon to work. My question is: after the amd stops working, will the computer allow the HD 3000 to connect to an external display? Is there some kind of limitation so that only the 6490m can use the thunderbolt port?
Early 2011 15" MBP running 10.9.4
i7 2635qm
Cheers!

Thanks for the fast reply!
So i assume this is because Apple uses a custom processor or because of the motherboard that inhibits it somehow, right? I'm asking that because some hd3000 chips in other systems are able to support a second display.
Anyway, thanks a lot. I will be careful not to lose the amd then

Is the data automatically synced after you do the original setuop or do you have to do something to make it sync? How are changes synced after the original setup?

How is the information synced after the original setup? Is it done automatically or do you have do do something? And if so, what?

After you setup Firefox Sync, you do not have to do anything else. It will automatically sync your data in the background. <BR><BR>
See these articles for more information:<BR>
[[How to sync Firefox settings between computers]]<BR>
[[What is Firefox Sync?]]

Script that will automaticly set the focus to the next text box after the previous one is completed

Specificly, entering a SSN into a form with three text boxes. 1st box for first 3 digits, 2nd box for middle 2 digits, and 3rd box for last 4 digits. I would like the user to be able to enter the 1st three digits into the 1st box, and after the 3rd digit is entered, the focus jumps to the 2nd box, then once the middle two are entered, the focus jumps the the 3rd box without having to manually use the tab key to advance through the boxes. Thanks.

See JavaScript - setFocus Method for tabbing to next form field for a sample form that uses a document level script and custom keystroke script. See Entering Document Scripts and Entering scripts for form fields by Thom Parker for detailed instructions on entering or viewing these type of scripts.

Changing the Final rating after the appraisal process is completed

Hi Experts,
Is there any way to change the final appraisal rating when the appraisal document is in the completed state?
I tried to change the rating only VA rating using standard FM HRHAP_DOC_FINAL_WRITE, but it deletes all the other records(VC, VB).
Can someone guide me on the same?
Thanks & Regards,
Vibha

Hi
Changes to Appraisal Template can only done when it is NOT Released, to Cancel Release there should not be any documents created by using this Appraisal Template and deleting completed appraisal documents is not Recommended in PRD enviornment.
You cannot make changes to appraisal template when it is in Released Status and it is not recommended to make changes to appraisal template which has appraisal documents.
You need to copy the appraisal template, create new appraisal template and make the changes to new template.
Hope this helps
Best Regards
Reddy
I think I misunderstood your question, if you want to change the attributes of final rating column, above is the answer.
If you want to make changes to the value in Final Rating Column, you can do that by using T code PHAP_ADMIN
Edited by: ILLITAM Papi Reddy on Mar 31, 2010 1:07 PM

After the clean up is complete in rescue mode.

it states scan disk.... and the does nothing and the same thing is observed on the lcd/interface?. clean up2. format all3. reload os4. reboot??I have tried reboot a few times, same rescue mode pops up, and so is my jukebox zen extra pretty much toast and do I need to complete #2 or #3? anyway to save the files on mp3 ( probably not, but I thought I would ask)?

Alex,
Thank you for your help.
I fixed the problem but still have two questions.
I took the beast into the shop and after a great deal of head scratching and doing the things I had already done they went to "universal access" and made an adjustment. Bingo. I had never thought to look there; figuring the display icon would govern display issues. We suspect our one year old did the adjustments when he got ahold of the mouse while our backs were turned and re-designed our desktop.
Anyway, please tell me more about problems with being in the southern hemisphere.
1. Would I be better off having the "small cable" removed and a line conditioner added rather than using the power transformer. I spent 160 au$ on the 240 to 120 transformer; would paying for the internal fix be worth doing on a four year old machine?
2. I will investigate recalibrating the CRT. Is this also a problem with the non-CRT screen on my new imac? I would suspect not but my ignorance is boundless.
I truley appreciate your generous help.
Daniel f
emac Mac OS X (10.4.8)

Change Department after the Discrete Job got Completed

Similar Messages

Maybe you are looking for