Change document information

Hi all,
Iam using CJ20N t-code to create project and wbs elements.
If any changes made to the project or wbs elements in CJ20N.I need to capture the last changed date and time.
I check the table PRPS,its giving the creation date,
changed date and username.But i want the LAST CHANGED TIME.
I try with the function module CHANGEDOCUMENTS_READ but the changes are not captured in that function module.
I would appreciate if anyone know the solution.
Thanks,
Vicky

Try transaction CN60.
You may need to use the "Choose functions" button.  Drag and drop the Change document functions "Select" and/or "Display" to activate these in the ALV listing.  Then use the newly added Change document functions to see the changes.
I just tried this but could not actually get it to display any change documents.  Please let us know if it works for you.
Message was edited by: James Gaddis

Similar Messages

  • F150 dunning- create change documents in FI journal

    hi all,
    when running F150 in update mode the dunning information is updated in the FI posting.
    however, no change documents are created for the FI posting.
    Is this possible to achieve and how?
    If I change dunning fields manually via FB02 I get the change document for those fields. I would like to get this also for the F150 program execution.
    Thanks in advance
    Hein

    Hi,
    maybe SAPNET note 609773 is helpful (depending on your SAP Release).
    best regards, Christian

  • The document information panel was unable to load. the document will continue to open. For more information, contact your system adminsitrator.

    Hi Guys,
    I am creating the library using object model with custom content type.  When i am opening document from custom content type, the meta data fields are not displaying in the document and throwing below error.
    The document information panel was unable to load. the document will continue to open. For more information, contact your system adminsitrator.
    Document Information Panel cannot open a new form.
    The form contains schema validation errors.
    Content for element '{http://schemas.microsoft.com/office/2006/metadata/propertiesRoot}properties' is incomplete according to the DTD/Schema.
    Expecting: {http://schemas.microsoft.com/office/2006/metadata/properties}properties.
    But after saving the document, then meta data is enabled.
    Thanks in advance for suggested solutions.
    thanks
    Santhosh G

    Hi,
    For a better troubleshooting, I suggest to do as follows:
    1. Please try to update the Location column's schema by following the steps below.
     1) Go to Site Settings -> "Site Columns"
     2) Click on "Location", after the page is opened. Don't modify any settings, click "OK"  to forcibly update the field's schema.
    2. Re-edit the document information panel template to see if the issue still occurs.
    Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
    3. Here are some similar links about your issue, please take some time to look at them:
    http://social.msdn.microsoft.com/Forums/en-US/sharepointcustomizationlegacy/thread/243b4852-3f17-4a3a-b6d7-187d65a5f088/
    http://blogs.msdn.com/b/raresm/archive/2010/03/30/document-information-panel-cannot-open-the-form.aspx
    https://joranmarkx.wordpress.com/2012/02/10/sharepoint-document-information-panel-cannot-create-a-new-blank-form/
    If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
    Apply-Fix -siteUrl "http://your site URL "
    function Apply-Fix($siteUrl)
    clear
    Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
    [Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
    foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
    Write-Host "Checking Web: " $spwTarget.Url
    $list = $spwTarget.Lists["your library name"]
    $fields = $list.fields
    foreach($field in $fields)
    if($field.SourceId -eq '{$ListId:your library name;}')
    $schemaxml = $field.SchemaXML
    $schemaxmldata = [xml]$schemaxml
    $schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
    $schemaxml = $schemaxmldata.get_InnerXml()
    $field.SchemaXML = $schemaxml
    $field.Update()
    Write-Host "Fixed" $field.Title "field in the library"
    Write-Host "Done."
    More information:
    SharePoint 2010: Creating a Custom Content Type using Visual Studio
    http://www.codeproject.com/Articles/410880/SharePoint-Creating-a-Custom-Content-Type-usi
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected].
    Dennis Guo
    TechNet Community Support

  • The Document Information Panel was unable to load.

    Platform: SharePoint 2013, Office 2013.
    Background: When you open an Office document from SharePoint users get this error:
    The Document Information Panel was unable to load. The document will continue to load. For more information, contact your system administrator."
    "The form cannot be opened. To fix this problem, contact the form designer. Form template:
    http://<site address>/../proppanel.xsn. The XML Schema for the form template has an invalid value for the following attribute: location." 
    I tried running this fix: http://www.cb-net.co.uk/microsoft-articles/2063-sharepoint-2010-templates-and-document-information-panel-errors, but it kept saying that it couldn’t see the url that
    I specified (I did check this carefully); think it might only apply to SharePoint 2010 – perhaps the shell syntax is different in 2013.
    Can anyone help me out?

    Hi Alex,
    According to your description, my understanding is that the error occurred when opening a document from SharePoint.
    Is this document information panel customized?
    I recommend to re-edit the document information panel template to see if the issue still occurs.
    Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
    If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
    Apply-Fix -siteUrl "http://your site URL "
    function Apply-Fix($siteUrl)
    clear
    Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
    [Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
    foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
    Write-Host "Checking Web: " $spwTarget.Url
    $list = $spwTarget.Lists["your library name"]
    $fields = $list.fields
    foreach($field in $fields)
    if($field.SourceId -eq '{$ListId:your library name;}')
    $schemaxml = $field.SchemaXML
    $schemaxmldata = [xml]$schemaxml
    $schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
    $schemaxml = $schemaxmldata.get_InnerXml()
    $field.SchemaXML = $schemaxml
    $field.Update()
    Write-Host "Fixed" $field.Title "field in the library"
    Write-Host "Done."
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • The Document Information Panel Was unable to load. Please Help

    Hello all,
    I just recently created my own custom Document Panel in InfoPath. I uploaded it into a custom content type. I applied this to a document library and it is the standard document panel for creating a new document within that document library. When I click
    "New document" I get this error..
    The Document Information Panel was unable to load. THe document will continue to open. For more information, contact your system administrator.
    Details:
    Document Information Panel cannot open a new form.
    The form cannot be opened. To fix this problem, contact the form designer.
    Form template: http://Mysite/_cts/DIPTestContentType/Myfirstform.xsn
    The SOAP response indicates that an error occurred on the server:
    Exception of type 'Microsoft.SharePoint.SoapServer.SoapServerException' was thrown.
    <detail><errorstring xmlns="http://schemas.microsoft.com/sharepoint/soap/">No item exists at http://Mysite/My DIP Test.docx.  It may have been deleted or renamed by another user.</errorstring><errorcode xmlns="(html
    for the error code..had to delete it because my body text cannot contain images or links until my account is verified but it is a link to Microsoft support)
    ...It appears that it is not locating the custom Document Panel.
    Could anyone point me in the right direction?
    Thanks

    Hi Alex,
    According to your description, my understanding is that the error occurred when opening a document from SharePoint.
    Is this document information panel customized?
    I recommend to re-edit the document information panel template to see if the issue still occurs.
    Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
    If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
    Apply-Fix -siteUrl "http://your site URL "
    function Apply-Fix($siteUrl)
    clear
    Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
    [Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
    foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
    Write-Host "Checking Web: " $spwTarget.Url
    $list = $spwTarget.Lists["your library name"]
    $fields = $list.fields
    foreach($field in $fields)
    if($field.SourceId -eq '{$ListId:your library name;}')
    $schemaxml = $field.SchemaXML
    $schemaxmldata = [xml]$schemaxml
    $schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
    $schemaxml = $schemaxmldata.get_InnerXml()
    $field.SchemaXML = $schemaxml
    $field.Update()
    Write-Host "Fixed" $field.Title "field in the library"
    Write-Host "Done."
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Office 2013 applications crash with Document Information Panel open

    I am using Office Professional Plus 2013 to work with documents that reside in SharePoint 2010 document libraries.
    The content type(s) in that SharePoint site collection are set to automatically show the Document Information Panel when opened in Office applications.  By opening any of these documents in their desktop app (via browser or Skydrive Pro), I am able
    to check-out and edit content; but the check-in step always crashes the application, giving a pop-up error: "An unknown errors has caused <office program> to stop working."
    By choosing to NOT automatically show the Doc Info Panel for these SharePoint documents, Office 2013 programs can handle everything just fine (editing, versioning, etc.).
    If I don't auto-show the Doc Info Panel, but then manually open the panel once I get inside the program, this crashes the program in the same way as before.
    If I save a local copy of a document and show the Doc Info Panel in any way (auto or manual), Office 2013 crashes.
    I couldn't find any postings on this error and I don't see this incompatibility listed in the
    Office 2013 known issues article and was wondering if anyone has had a similar experience?

    I am having the exact same issue.  I have created a Custom Site Column which is defined as a CHOICE.  I do not want to put in a Default so left it blanl but field must be populated.  I then put this into a Document Library Content Type.  
    With documents that are already been uploaded and in the Library when I pull up in Office Web Apps, I can make changes to the document but when I try to save it crashes.   Also, when I pull up document and say edit in Office Web Apps there is no
    way to change information in the Document Information Panel since this does not appear.   (I forgot to mention that I required DIF to display in Content Type also). 
    This only happens on blank column fields when trying to save.  If I do a Quick EDIT of the list and change my blank Choice columns to something(I created as radio buttons) and then go through the process it works OK and will save.  Not sure
    if this pertains to your issue but, I just prepopulate all columns with what the should be,  when a brand new document from word, excel etc is created it is created from the Desktop version of Word Excel and when IT saves to SharePoint, I get
    a message to choose information to put into properties before it actually saves. 
    Hope this helps a little.   

  • Change Pointers - adding a new field to existing Change Document

    Hi,
    We have a requirement to capture the changes made to the Material object through the transaction C223. The changes to field MKAL-PRFG_F have to be captured.
    There is an exisitng Change Document Object - MATERIAL. This is included in Message Type MATMAS. These are the steps we have done:
    1. In SCDO - added the Z structure to the Change Document Object - Material. [Z structure contains the field MKAL-PRFG_F. Change pointer option is checked for this Data element.
    2. Created a Z Message Type with reference as MATMAS.
    3. In BD52 - we have listed the fields for the new Z Message Type created.
    4. The Change Pointers - reactivated after the steps are done.
    The changes to the field MKAL-PRFG_F through C223 Tcode are not recorded in BDCPV table.
    Have we missed any steps here?
    Thanks,
    Pallavi

    HI,
    I don't think a new zmessage type is required in this case.. is the structure added to MARA table??The change document programs are there which triggers the iodcs... In SCDO transaction code , click on generation info for MATERIAL.. You will find the includes. The FM MATERIAL_WRITE_DOCUMENT creates entries in CDHDR and CDPOS, if we maintain entries in BD52 , the entries wil be written in BDCP and BDCPS tables.
    Try to add your structure in MARA table as append strucre and then you can debug the IDOC from WE19 and use the FM "MASTERIDOC_CREATE_SMD_MATMAS" and then you also need to switch on Update Debugging on, to debug the changes in update FM   MATERIAL_WRITE_DOCUMENT.
    Please see if the change is reflected or not....
    ELSE.
    may be you need to create a new entry in SCDO and do all the ALE configurations for change pointers.
    Please find the link for change pointers and also you can get lot of information on change pointers in SCN.
    http://help.sap.com/saphelp_nw70/helpdata/EN/12/83e03c19758e71e10000000a114084/content.htm
    Regards,
    Nagaraj

  • Creation of Change document for HR Assignemnt Infotype in Transaction- CR02

    Hi,
       I have to create change document for HR Assignment in Transaction CR02.
    I have gone thru the documentation available in SAP help.
    Please help me if anybody has worked on it.
    Thanks & Regards,
    Alok.

    Hi Raja,
    I didn't quite understand what you mean by creating/changing data using transaction codes, because within SAP MDM 3.0 you are in a portal environnment and don't work with transaction codes.
    General remark: Information on the up-to-date MDM 5.5 is provided in the Service Marketplace. For an overview of MDM 5.5, see also http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/mdm/capabilities provided with sap mdm 5.5.pdf.
    Kind regards, Markus

  • Unable to proceed in change document are not updating in CDHD, CDPOS tables

    Hi all,
    This is a question related to Change document.
    I created one custom Change document object ‘ZBUDGETS’.
    As I am trying to place a trigger on FMIT (Total Funds Management) table I created a Change document object ‘ZBUDGETS’.
    I included some of the authorized fields from FMIT table on which we placed the trigger.
    And of course all those fields are change document enabled in the data element level. I generation of the update program was completed. And I got the function module zbudgets_write_document along with some include programs and structure.
    Everything is fine, But i am unable to get this change document generated information to these tables are CDHDR and CDPOS.
    the problem is when I make any expenditure like PO Posting, it will be logging in the FMIT table and the respective fields also updating. With this the Change document object should trigger and it should send the record in CDHDR and CDPOS tables. This is not happening. If the records are getting updated in the CDHDR and CDPOS tables I can use those include programs and function modules in my program to retrieve the changes in FMIT table.
    Since I am unable to proceed further since the documents are not updating in CDHDR and CDPOS tables.
    Prabhakar

    CDHDR and CDPOS will not be populated with entries only by creating the change document object.Change documents will be written to CDHDR and CDPOS tables only if the function zbudgets_write_document is called in the transaction which updates FMIT.
    You need to find an use exit in the transaction updating FMIT and call the function zbudgets_write_document in that exit.
    Refer the below link http://help.sap.com/saphelp_47x200/helpdata/en/2a/fa01b6493111d182b70000e829fbfe/content.htm
    -Kiran
    *Please reward useful answers

  • TABLES CHANGE DOCUMENTS, SUPPORT MESSAGE.

    Hi Everyone, I'm doing a "Z" report.
    When I Display a support Message,  Extras Menu / Change documents option.  I can see every action that message have.
    In which table I can find this information?
    What are the tables that support message (header and positions) had?
    Thanks in advance.

    Hi
    This is ur ans
    This information is extracted via method read_change_docs of class cl_crm_component_change_docs. You can test it in transaction SE24 passing the transaction GUID as value for IV_OBJECT_ID.
    The transaction GUID can be found in table CRMD_ORDERADM_H.
    And can be found here
    Report to show changes of supportdesk mgs
    Regards
    Prarkhar

  • How to change Document Date on a Old Purchase Order

    We are having issues with about 57 purchase orders document date set at 12/31/2999 that is causing issues implementing Business Intelligence.  Is there a program that I can use to change these dates back to 12/31/2019 or something.  Due to calendar year 2999 not being setup BW can not bring this information into their queue.  I hate to do this via debug.  Are there any options.  Thank you for your help.
    Chandra

    According to SAP, since purchase order is a legal document they do not support the process of changing document number.  They suggested I do the change with debug and replace at my own risk.  In ME22N go to debug and type MEPO_TOPLINE-BEDAT.  The values for this field show up as 29991231 that should be changed to 20191231 and press F8, then save the purchase order.

  • ABAP OO Class and Change Documents

    I have created a class based on the IF_WORKFLOW interface.  I created a couple of events.  I created a workflow task assigned to a custom method of the class.  I setup the Material Change Document to trigger the class event when there is a change.  The workflow task does trigger when I change a material, but I don't know how to pass the key of the Change Document (matnr) to the workflow task/method using the ABAP OO Class interface.  Any help?
    Thanks,
    Kenneth

    Thanks for the reply Florin.  Yes, I have seen Joclyn Dart's Whitepaper and blogs.  They are very helpful, but I haven't seen much information within them about Change Documents.  I tried your suggestions, but the material key is still not being filled when I trigger the change document and workflow task using tcode MM02.
    Here is what I have done:
    Created an Attribute 'Material' type mara-matnr and checked 'Key Attribute'.
    Created an Attribute M_POR type SIBFLPOR.
    Here are the methods:
    Constructor with parameter 'Material' *
    METHOD constructor.
      me->m_por-catid = 'CL'.
      me->m_por-typeid = 'ZMM_WF_MATTEC'.
      me->m_por-instid = me->material.
    ENDMETHOD.
    Find_by_lpor with parameters LPOR and RESULT (default params) *
    METHOD bi_persistent~find_by_lpor.
      DATA: p_material TYPE matnr.
      MOVE lpor-instid TO p_material.
      TRY.
          CREATE OBJECT result
            TYPE
              zmm_wf_mattec
            EXPORTING
              material      = p_material.
        CATCH cx_bo_error .
          EXIT.
      ENDTRY.
    LPOR with parameter RESULT (default param) *
    method BI_PERSISTENT~LPOR.
    result = me->m_por.
    endmethod.
    ENDMETHOD.
    Custom method MAT_CHANGED with parameter 'Material' * (not coded yet)
    This is the task being triggered by the Change Documents *
    METHOD mat_changed.
    ENDMETHOD.
    Edited by: Kenneth Moore on Nov 4, 2008 11:00 AM

  • Change documents with persistent class

    Hi,
    I have created a persistent class and want to use a set-method to change data in the mapped table - nothing special.
    But: Does anybody know if there's a possibility to write change documents for the changed field without calling FMs like CHANGEDOCUMENT_SINGLE_CASE?
    There would be the event if_os_state~changed but unfortunately no information about the changed field itself is available in this event. Is it possible to redefine events?
    Thanks a lot for each answer!
    Best regards
    Jörg

    Hi Narin,
    thanks for your answer!
    The first point is plain to me (although I don't really feel happy about this ) but I have problems understanding your second point because I don't really know what "Business object events" are... I'll try a different phrasing, maybe this is better:
    My persistent class inherits the event if_os_state~changed. Can I redefine this event in my class so that I can add an additional parameter where I can put the information about the changed attribute?
    Jörg

  • Remove Add Document Information in PDF Printer

    We are using Adobe Acrobat Standard X.  We used the Adobe Customization Wizard to create a custom setup to use for the rollout.  One of the setting we changed was the “Add Document Information” setting in the Adobe PDF printer setting.  We do not want metadata to be included in the file.  This has worked great for over a year.  When we installed the Adobe update 10.1.8 is was changed by the update to add the information back into the file.  We are looking for a way to change the setting back on several hundred PCs without having to visit each one and uncheck the box in the printer setting.  A registry setting would be great.

    I have removed Adobe X on a several test machines.  I reinstalled using our custom setup with the "Add Document Information" unselected.  I can install update 10.1.9 with no problem.  If I do the custom install and then install the 10.1.8 update I get mixed results with some machines turning the "Add Document Information" back on. 
    Any ideas to turn this off would be helpful.  Uninstalling and reinstalling is not a solution due to the number of computers.

  • How to get the Change Document Header details for a given date

    Hi All,
    Can anyone help me on this Change Document Header details(CDHDR).
    Better way to pull the information of Change Document Header details(CDHDR). No Index is maintained for the tables.
    So please suggest better Optimising techniques to get the Change Document Header details(CDHDR).
    Using this Function module : CHANGEDOCUMENT_READ_HEADERS how to import the DATE_OF_CHANGE.
    Thanks in advance
    Regards
    Chakri

    HI,
    Go through the documenattion of the FM u can get the details.. and also where used list
    Regards,
    Nagaraj

Maybe you are looking for