TABLES CHANGE DOCUMENTS, SUPPORT MESSAGE.

Hi Everyone, I'm doing a "Z" report.
When I Display a support Message, Extras Menu / Change documents option. I can see every action that message have.
In which table I can find this information?
What are the tables that support message (header and positions) had?
Thanks in advance.

Hi
This is ur ans
This information is extracted via method read_change_docs of class cl_crm_component_change_docs. You can test it in transaction SE24 passing the transaction GUID as value for IV_OBJECT_ID.
The transaction GUID can be found in table CRMD_ORDERADM_H.
And can be found here
Report to show changes of supportdesk mgs
Regards
Prarkhar

Similar Messages

CHARM: UCs - Login prompt when changing Support messages to test

Hi,
When changing a support messages UC to test, the login prompt screen is displayed. How can we stop login screen?
Thanks,
Digesh

Hi,
When changing a support messages UC to test, the login prompt screen is displayed. How can we stop login screen?
Thanks,
Digesh

EHP1 Upgarde Monitor screen resolution problem in a support message

Hi Experts,
We have recently upgraded our Solution manager to EHP1, iam facing a screen resolution problem with 15 inch monitors.
Our key users have 15 inch monitors to their system and when they try to reply a support message under transaction data-> Overview tab -> reply it is showing only one line for them , due to which they are unable to enter the complete data in it.
How ever We have found that this does not occur with 17 inc monitors as the required screen resoution 1280* 1024 is possible due to bigger size of the monitor.
can any one suggest how to make the overview tab visible completely with small resolution monitors.
Thanks
Nanda

>
Nanda Kishore wrote:
> Hi
>
> There is an note from sap on this issue i couldnt remember the note number which talks about updating your package levell
>
> Kindly check this note it was released in SEP 09 a very recent one. this will resolve your probelm.
SAP Note 1351673 Size of containers not changed for support messages
Best regards,
Ruediger

BAPI for CRMD_ORDER support message? Urgent

Hi Experts,
I want to change the support messages created.
For that do we have a BAPI, for the support message?
It is an urgen requirement..
Points will be rewarded ....
thanks,
Mahantesh

Hey Mahantesh,
As i already mentioned in my previous post, you have to use FM CRM_ORDER_MAINTAIN in the BADI ORDER_SAVE to update any field which is present in tcode CRMD_ORDER.
Please Consult CRM techincal consultant to know how to use FM CRM_ORDER_MAINTAIN in order to update the ibase and component.
please reward points for usefull answer.
Regards,
Anand...

How to find Document flow / Relationships to a support message

Hi Friends,
I am new to Solution manager. I would like to know how to find Document flow of a Support message.
For example I have a Support message, there are few Change requests and tasks linked to it. This can be viewed from CRMD_ORDER transaction (Where used list button / Document flow), preceding documents and related documents.
Is there any function module or table where I find the link between these different transaction types or atleast any report!
Thanks in advance

Hello Sesagiri,
Can you explain the process to link support message with change requests and tasks.
pls help me.
Regards,
Babu

How can we create a message type on the change document to save 3 fields

Hi all..
we have to create change document for a custom table and we have to create a message type for 3 fields in that table...Pls let me know the process of doing it...
Thanks in Advance...
Regards..
Sashidhar

Google has tons of tools and articles to try. You could start here: http://support.google.com/webmasters/bin/answer.py?hl=en&answer=35769

Table to look for change documents for users

Hi friends,
Is there any standard table to look for change documents for a user?change document through SUIM does not give the correct log.
Thanks for you support.

Julius
Looking at another of Tracy's other post (http://scn.sap.com/thread/3598947) she's trying to use ACL. Hence needing to know the tables to write joins/queries to hit tables within ACL
I've seen ACL used and have had the fun experience of Auditors using Google to find tables to perform checks on without context of what has actually been implemented in their particular system.
Regards
Colleen

Change documents for customer Z table - serious help wanted

Hi all,
I am no beginner and I don't expect any comments from beginners.
Situation: My customer wants to replace the material valuation transactions MRN1 MRN2 MRN3 due to bad performance and locking problems with own developed programs.
The valuation results will be stored in a customer Z-Table on a monthly base. For auditing and transparency purposes, this Z-table has to get a change object and the update routines will have to write change documents.
Due to the expected size of the new Z-table, it is not advisable to simply switsch on table logging.
In this huge project (and in none I participated!) nobody ever implemented the change document process for a Z-table. BUT EVERYBODY CAN TELL YOU THI IS NO PROBLEM AT ALL.
I read some documentation at SAP and serached for threads or blogs here. I could not find anything desribing that in depth.
So before I start, I'd be happy to get some hints from people who created own change documents and implemented the process. Links to documentation and other helpful pages are also welcome.
If I can keep the process simple, I'd like to create a BLOG on this - because I think, in the future it will get more and more difficult to pass the auditing process with undocumented features and uncontrolled table changes.
TIA.
Regards,
Clemens

Hi,
Please check this thread.
http://www.sapdevelopment.co.uk/tips/changedoc/cd_createch.htm
Once you create your change document object using generate update pgm option then please check the WRITE document fm.
I have done this long back i am updating CDHDR and CDPOS for 2 table YATT and YATTPLANTS. Here YATT have single record (header table) and YATTPLANTS have multiple records (item table)
function yatt_write_document .
call function 'CHANGEDOCUMENT_OPEN'
 exporting
 objectclass = 'YATT '
 objectid = objectid
 planned_change_number = planned_change_number
 planned_or_real_changes = planned_or_real_changes
 exceptions
 sequence_invalid = 1
 others = 2.
case sy-subrc.
 when 0. "ok.
 when 1. message a600 with 'SEQUENCE INVALID'.
 when 2. message a600 with 'OPEN ERROR'.
endcase.
if upd_yctc ne space.
 call function 'CHANGEDOCUMENT_SINGLE_CASE'
 exporting
 tablename = 'YATT '
 workarea_old = o_yatt
 workarea_new = n_yatt
 change_indicator = upd_yattc
 docu_delete = 'X'
 exceptions
 nametab_error = 1
 open_missing = 2
 position_insert_failed = 3
 others = 4.
 case sy-subrc.
 when 0. "ok.
 when 1. message a600 with 'NAMETAB-ERROR'.
 when 2. message a600 with 'OPEN MISSING'.
 when 3. message a600 with 'INSERT ERROR'.
 when 4. message a600 with 'SINGLE ERROR'.
 endcase.
endif.
if upd_yctcauthplnts ne space.
 call function 'CHANGEDOCUMENT_MULTIPLE_CASE'
 exporting
 tablename = 'YATTPLANTS '
 change_indicator = upd_yattplants
 docu_delete = 'X'
 tables
 table_old = yyattplants
 table_new = xyattplants
 exceptions
 nametab_error = 1
 open_missing = 2
 position_insert_failed = 3
 others = 4.
 case sy-subrc.
 when 0. "ok.
 when 1. message a600 with 'NAMETAB-ERROR'.
 when 2. message a600 with 'OPEN MISSING'.
 when 3. message a600 with 'INSERT ERROR'.
 when 4. message a600 with 'MULTIPLE ERROR'.
 endcase.
endif.
call function 'CHANGEDOCUMENT_CLOSE'
 exporting
 objectclass = 'YATT '
 objectid = objectid
 date_of_change = udate
 time_of_change = utime
 tcode = tcode
 username = username
 object_change_indicator = object_change_indicator
 no_change_pointers = no_change_pointers
 exceptions
 header_insert_failed = 1
 object_invalid = 2
 open_missing = 3
 no_position_inserted = 4
 others = 5.
case sy-subrc.
 when 0. "ok.
 when 1. message a600 with 'INSERT HEADER FAILED'.
 when 2. message a600 with 'OBJECT INVALID'.
 when 3. message a600 with 'OPEN MISSING'.
* WHEN 4. MESSAGE A600 WITH 'NO_POSITION_INSERTED'.
* do not abort, if positions are not inserted!!!
 when 5. message a600 with 'CLOSE ERROR'.
endcase.
endfunction.
a®

Report for Support Message, Change Request and Change in one overview?

Is there a report that shows the relation between the support message, change request and the change in one overview? I am already aware of the Change Management Reporting via SOLAR_EVAL, but this does not show the whole document flow in one overview.
The incident message processors want to have a quick overview of the status of the changes that are created on the basis of the support message.
If there is no report, could you point me in the right direction... Do I have to create a query or are you using BW for service desk/charm reporting?

Hi
chk te sap note
[Note 1466131 - ChaRM Reporting: Performance of data update|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1466131]
jansi

Change B2B error message: "Error in R/3 system: document cannot be sent"

Hi experts!!
I had the requirement the B2B user not to be able to change orders from the past days.
I wrote some ABAP code in MV45AFZZ user exit and the functionality works fine! I even receive my custom error message in the B2B but before my message i also get "Error in R/3 system: document cannot be sent. Call our hotline.."
Is there anyway i can change this standard message in JAVA side???
Thank you in advance!!

In the ABAP side, set break point in BAPI_SALESORDER_SIMULATE and check the BAPIRETURN table.. Depending upon the stage and action on the order, the other RFCs you might focus on are SD_SALESDOCUMENT_CREATE or SD_SALESDOCUMENT_CHANGE. The return structure is BAPIRET2 for this set of RFC.
You might remove the "unwanted messages here.. or let them flow into the Java layer and tackle them there. That will require you to extend different xxxxStrategyR3 classes and overwrite certain methods in certain classes. The development is NOT streamlined here.
Read the classes CreateStrategyR3 - there is a method performCustExitAfterR3SimulateCall
in ReadStrategyR3 - there is a method called replaceR3MessageTexts and in change..
in ChangeStrategyR3 - there is a method called performCustExitAfterR3Call
In all these places you have to read the appropriate table that contains the message and remove it. See ReadStrategyR3~replaceR3MessageTexts for some idea..

Change Documents for the table EKET

Hi ,
We create a purchase order from ME21N . We do have some data for delivery schedule for the data .
This delivery schedule data gets stored in tabe EKET . When this PO is processed from V_V2 the dates
in the delivery schedule are overwritten and he new values will be even in the table EKET . When I follow
the navigation Environment -> Item Changes I dont see the changes documents for these fate fields . I did
debug through the FM EINKBELEG_WRITE_DOCUMENT to see but it looks like it is not captuirng the fields .
Now my requirement is to find where the change documents can be found for the date changes in the delivery
schedule tab in the PO . The fields of interest are :
EKET-SFLDT , EKET-DAT01, EKET-MBDAT , EKET-LDDAT , EKET-WADAT .
I tried for some OSS notes too, but in vain . Can anyone please help to find out how we find the changes documents for these fields .
Also please tell me if there are any OSS notes which explain us to extend the table EKET .
Thanks and Regards ,
Varun .

HI ,
I did check the table CDHDR and CDPOS and also the change document is checked for the data element but no change documents are stored in CDHDR and CDPOS .
Did anyone ever extend the tabke EKET ? Any OSS notes available for this .
Regards ,
Varun .
Message was edited by: varun sonu

Need to create a Change document for tracking Purpose on standard table

Hi Experts,
I am updating a field in standard table so need to create a change document for tracking the changes being done on the field.
I created the change Document with transaction SCDO but I am stuck at point - How to call that in the report program to enable the change document.
Please advice.
Thanks!!

Hi
U can assign your transaction to Z-report like this:
PARAMETERS: TAB1 RADIOBUTTON GROUP R1 DEFAULT 'X',
 TAB2 RADIOBUTTON GROUP R1,
 TAB3 RADIOBUTTON GROUP R1.
DATA: TABNAME TYPE TABNAME.
START-OF-SELECTION.
CASE 'X'.
 WHEN TAB1. TABNAME = 'BSID'.
 WHEN TAB2. TABNAME = 'BSAD'.
 WHEN TAB3. TABNAME = 'BKPF'.
ENDCASE.
CALL FUNCTION 'RS_TABLE_LIST_CREATE'
 EXPORTING
 TABLE_NAME = TABNAME
* ACTION = 'ANZE'
* WITHOUT_SUBMIT = ' '
* GENERATION_FORCED =
* NEW_SEL =
* NO_STRUCTURE_CHECK = ' '
* DATA_EXIT = ' '
* IMPORTING
* PROGNAME =
* TABLES
* SELTAB =
 EXCEPTIONS
 TABLE_IS_STRUCTURE = 1
 TABLE_NOT_EXISTS = 2
 DB_NOT_EXISTS = 3
 NO_PERMISSION = 4
 NO_CHANGE_ALLOWED = 5
 OTHERS = 6
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

Support message and change requests only for production system

Hi guys,
I would like to connect the solman helpesk with CHARM ( CHARM is still running ).
In CHARM I have to create a CR only for production system. ( don't know why - but works as designed).
In SAP helpdesk I can create support messages for every kind of system type but if I want to connect both (HD and CR) , the source system (ibase component) of the issue will copied to the CR and runs in error because of the rule (only p-system) of CHARM.
Of course I can change the ibase to production system manually in SDCR but it seems a very error-prone method.
Now my question: is it possible to change the ibase component due to the creation of CR by copy rule or something like this?
Kind regards
Rayko

Hi Rayko,
We do not have this option.
Once in ChaRM, we assume that the changes will always correct an issue in the PROD system.
I would recommend to open the tickets directly with the PROD system IBase, once the issue is also happening there.
Best Regards,
Fernando

How to use change document for AUSP table in MM02?

Hi All,
I am working with MM02. When I change the characteristic value in classification view, I want that change to be logged in CDHDR table.
I have created a change document object for AUSP table and generated update program for that. Now that program needs to be called in some badi or exit which can be called upon saving in MM02 after changing the values in classification view.
Can anybody give me some idea where can I call that program.
Any help wud be appreciated.
Regards,
Pragya

Hi
You have 2 possible solutions to meet this requirement.
Option 1: Implement point # 3 of SAP OSS Note 943559
Option 2: This is a workaround solution to skip standard SAP check for activation of change documents of Classification system and allow entries to be written into CDHDR and CDPOS table through MM01 / MM02 / CL20N tcode
Solution: Implement an implicit enhancement inside include program 'LCLVFF10', at end of subroutine 'FILL_REDUN' i.e. line number '337'.
Here modify the entry of table 'REDUN' where OBTAB = 'MARA' and set the flag 'AEBLGZUORD' equal 'X'. This will activate the change document creation for Change Object 'CLASSIFY' in CDHDR and CDPOS tables.
Sample Code
LOOP AT redun WHERE obtab EQ 'MARA'.
redun-aeblgzuord = 'X'.
ENDLOOP.

TABLES CHANGE DOCUMENTS, SUPPORT MESSAGE.

Similar Messages

Maybe you are looking for