Change / edit list of available driver in cf admin

Hello
I would like to edit the list of available driver in the data
& services > data source; to add the MysQL 5 driver, is that
possible ?

No.
You must use the "other" driver option.
Please see
http://www.adobe.com/go/6ef0253

Similar Messages

How to change the width of the EditForm.aspx and NewForm.aspx for both new and edited list entries?

How to change the form widths for the EditForm.aspx and NewForm.aspx files that display both new and edited list entries?

Hi ,
According to your description, my understanding is that you want to modify the width of the New Form and Edit Form of a list in SharePoint 2010 .
1.Go to your SharePoint site -> your list.
2.In top ribbon click List tab(List Tools).
3.Towards right you will see option as Form Web Parts, click on it, the three forms will be listed there [New Form, Display Form, Edit Form].
4.Select the one on which you want to increase the width/height.
5.It will open in edit mode, click on Add a Web Part.
6. Click on Forms [Categories] => HTML Form Web Part.
7.After adding the HTML Form Web Part, click on Edit WebPart.
8.Click on Source Editor, Remove all code from it and put an empty HTML table with width and height as per your requirement ex. to increase width
<TABLE WIDTH="800px">
<TR><TD></TD></TR>
</TABLE>
9.Save the form and check out your respective modal by clicking on the same in your list view.
Reference:
http://sharepoint.stackexchange.com/questions/40580/how-to-modify-width-of-standard-dialog-form-sharepoint-2010
Best Regards,
Eric
Eric Tao
TechNet Community Support

XP Pro Windowsw/Fonts has a font. It is listed as available in MS Word. It is not listed as available in Adobe Illustrator CS6. How do I fix this? Thanks.

XP Pro Windowsw/Fonts has a font. It is listed as available in MS Word. It is not listed as available in Adobe Illustrator CS6. How do I fix this? Thanks.

BobbyH5280. Very helpful answer! I am XP for the next week on CS6. I did find 3 items that helped. The fonts are in AI, but are listed on the bottom of the list. Also in Edit/Preferences/Type, checking "Show Font Names in English" makes the font list easier to read (doesn't appear to change the sort order though), and (with your suggestion) checking "Sow Asian Options" might do something positive. Thanks to all of you who sent in tips.

How to register a new list of JDBC driver to ODI?

Hi Guys,
How to register a new list of JDBC driver to appear on ODI?
exam :
When I defined a new master repository that resides on MSSQL 2005
I already had sqljdbc.jar (This is mssql2005 jdbc driver) on the ..\oracledi\drivers
But when I browsed jdbc driver list it will not appear any new driver we just put them in the driver folder.
I knew this is a common issue.
So I need to manually define a driver class and url to match exactly with the jdbc document say for sqljdbc.jar
which is
Driver Class : com.microsoft.sqlserver.jdbc.SQLServerDriver
URL : jdbc:sqlserver://localhost:1084
I think that the driver list will have to store in somewhere in the xml files OR some records on the master repository database.
But where ?
Because I saw the new list driver (Microsoft SQL Server 2005 driver for JDBC) on the vmware image that I had (actually it is ODI Training workshop VMware Image).
But I don't know where to looks.
Here are some proof that they actually appear in the driver list
[Original MSSQL 2000 Driver List|http://img.ihere.org/uploads/1f6d1601bb.png]
[New MSSQL 2005 Driver List|http://img.ihere.org/uploads/94cc91e1ac.png]
How comes?
Thank you in advance.
Somchai
Edited by: somchai on Feb 12, 2009 8:24 AM

Hi CTS !
Then, its impossible add new drivers into ODI ? So, if I need to add a driver and this exist in Oracle list drivers, what can I do in this case ?
I have problems with Oracle JDBC driver in ODI. When I try generate web services the "Not suitable driver" message is shown. In Design, module part, when i generate web service i have the "*name of data source*" field and I put into "oracle.jdbc.driver.OracleDriver". Ok, this isn´t a correct sintax, then I read in this manual "*note that the name of the data source must be consistent with the entries in context.xml and web.xml, prefixed with:java:/comp/env/*".
Ok, In other post (Re: Not found web.xml and content.xml files into ODI folders
you said me only necessary to change the web.xml and context.xml is only necessary if I use Tomcat. Then, how to discover a correct sintax to put into this field and generate my web service ?
Best regards,
Joao.
Edited by: JohnnyBeGood on 16/02/2009 09:00
Edited by: JohnnyBeGood on 16/02/2009 09:29

Editing Favourites in Nokia Drive 3.0

Can anyone please tell me how to edit favourites, i.e. How to delete or change name. As an example, when saving your position it seems that the name used on the favourite is taken from the map and if the map is not updated with the correct adress I need to change this (this is a fact with my home adress). Further more I cannot find avway to delete a saved favourie. Am I missing something here? As far as I can see nothing much new with this version of Nokia Drive.
Solved!
Go to Solution.

Just as the answer above.
To access the favourites, you first have to "Set destination" and from there choose the favourite list.
Also mind that the favourite list in Nokia Drive is totally separated from the favourite list in Nokia Maps...

Custom playbar does not display in the list of available widgets

I followed the steps described in the "Skins" page of the Captivate 5 help outlined here:
http://help.adobe.com/en_US/captivate/cp/using/WSc1b83f70210cd101126156ac11c7f147d6b-8000. html
Now my problem is, that my custom playbar is not displayed in the list of available playbars (neither in the Project->Skin Editor->Playbar nor in the list of widgets). If I just duplicate one of the existing playbar files in Gallery/Widgets/Playbars it's listed without problems.
I use Flash CS5 to edit the playbar and tried to publish it as AS3 and AS2 - no success.
Are there special settings I need to set in the publishing settings to get my playbar in the list? Anything else I'm missing?!
Thanks,
Peter

Try putting the swf for the playbar in ...\Adobe Captivate 5\en_GB\Gallery\Playbars\AS3\

Scipt to prompt and authenticate users to AD and then map 2 next available drive letters to 2 network shares

Hi,
So I have been trying to write some code that will
prompt users to authenticate to AD and use that authentication to map the next 2 available drive letter to two network shares.
I have adopted using the HAT format as this provides me with the ability to prompt for a username and password and authenitcate to AD.
<script language="vbscript">
Function setSize()
window.resizeTo 350,300
Window.moveTo (screen.width-240)/2, (screen.height-600)/2
End Function
Function cmdSubmit_OnClick()
Dim strUser 'User Name variable
Dim strPW 'User Password variable
if auth.username.value = "" Then
msgbox ("ERROR: No User account information provided. Please Try Again!")
cmdSubmit_OnClick = False
Elseif auth.password.value = "" Then
msgbox ("ERROR: No User account information provided. Please Try Again!")
cmdSubmit_OnClick= False
Else
strUser = auth.username.value
strPW = auth.password.value
Authenticate strUser, strPW
End If
End Function
Public Sub Authenticate (Byref strUser, Byref strPW)
On Error Resume Next
Const ADS_SECURE_AUTHENTICATION = &H1
Const ADS_SERVER_BIND = &H200
Dim strPath 'LDAP path where the Users accounts are listed
Dim LDAP 'Directory Service Object reference variable
Dim strAuth 'Parses the User Name and Password through the DSObject
strPath = "LDAP://fanzldap.au.fjanz.com/rootDSE"
Set LDAP = GetObject("LDAP://company/rootDSE")
Set strAuth = LDAP.OpenDSObject(strPath, strUser, strPW, ADS_SECURE_AUTHENTICATION Or ADS_SERVER_BIND)
If Err.number <> 0 Then
intTemp = msgbox(strUser & " could not be authenticated", vbYES)
if intTemp = vbYes Then
'window.location.reload()
End If
Else
For Each obj in strAuth
If obj.Class = "user" Then
If obj.Get("samAccountName") = strUser Then
msgbox ("Success! " & strUser & " has been authenticated with Active Directory")
window.close()
Set wShell = CreateObject("Wscript.shell")
wShell.run "Firstletterali.vbs"
End If
End If
Next
End If
End Sub
</script>
<head>
<body style="background-color:#B0C4DE">
<img src=Title.jpg><br>
<HTA:APPLICATION
APPLICATIONNAME="User Login"
BORDER="thin"
SCROLL="no"
SINGLEINSTANCE="yes"
WINDOWSTATE="normal">
<title>NAS Authentication</title>
<body onload="vbs:setSize()">
<div class="style2">
<h3>NAS Archive Authentication</h3>
</div>
<form method="post" id="auth" name="auth">
<span class="style3"><strong>User Name:  </strong></span>
<input id="Username" name="Username" type="text" style="width: 150px" /><br>
<span class="style3">
<strong>Password:     </strong></span>
<input id="password" name="password" type="password" style="width: 150px" /><br><br>
      
<input type="submit" value="Submit" name="cmdSubmit" />
<input type="button" value="Exit" onclick="self.close()">
</form>
</body>
</html>
using the above I can succefully authenticate users but I cant work out how to then use that authenticattion to map the next to available drive letters to a network source.
The code I have for that is
Option Explicit
Dim strDriveLetter, strRemotePath, strRemotePath1, strDriveLetter1
Dim objNetwork, objShell
Dim CheckDrive, DriveExists, intDrive
Dim strAlpha, strExtract, intAlpha, intCount
' The section sets the variables
strRemotePath = "\\mel\groups\Team\general"
strRemotePath1 = "\\mel\groups\Team\specific"
strDriveLetter = "B:"
strDriveLetter1 = "H:"
strAlpha = "BHIJKLMNOPQRSTUVWXYZ"
intAlpha = 0
intCount = 0
err.number= vbEmpty
' This sections creates two objects:
' objShell and objNetwork and then counts the drives
Set objShell = CreateObject("WScript.Shell")
Set objNetwork = CreateObject("WScript.Network")
Set CheckDrive = objNetwork.EnumNetworkDrives()
' This section operates the For ... Next loop
' See how it compares the enumerated drive letters
' With strDriveLetter
On Error Resume Next
DriveExists = False
' Sets the Outer loop to check for 24 letters in strAlpha
For intCount = 1 To 24
DriveExists = False
' CheckDrive compares each Enumerated network drive
' with the proposed drive letter held by strDriveLetter
For intDrive = 0 To CheckDrive.Count - 1 Step 2
If CheckDrive.Item(intDrive) = strDriveLetter _
Then DriveExists = True
Next
intAlpha = intAlpha + 1
' Logic section if strDriveLetter does not = DriveExist
' Then go ahead and map the drive
'Wscript.Echo strDriveLetter & " exists: " & DriveExists
If DriveExists = False Then objNetwork.MapNetworkDrive _
strDriveLetter, strRemotePath
call ShowExplorer ' Extra code to take you to the mapped drive
' Appends a colon to drive letter. 1 means number of letters
strDriveLetter = Mid(strAlpha, intAlpha,1) & ":"
' If the DriveExists, then it is necessary to
' reset the variable from true --> false for next test loop
If DriveExists = True Then DriveExists = False
Next
WScript.Echo "Out of drive letters. Last letter " & strDriveLetter
WScript.Quit(1)
'Sub ShowExplorer()
'If DriveExists = False Then Wscript.Echo strDriveLetter & " Has been mapped for archiving"
'If DriveExists = False Then objShell.run _
'("Explorer" & " " & strDriveLetter & "\" )
'If DriveExists = False Then WScript.Quit(0)
'End Sub
On Error Resume Next
DriveExists = False
' Sets the Outer loop to check for 24 letters in strAlpha
For intCount = 1 To 24
DriveExists = False
' CheckDrive compares each Enumerated network drive
' with the proposed drive letter held by strDriveLetter1
For intDrive = 0 To CheckDrive.Count - 1 Step 2
If CheckDrive.Item(intDrive) = strDriveLetter1 _
Then DriveExists = True
Next
intAlpha = intAlpha + 1
' Logic section if strDriveLetter1 does not = DriveExist
' Then go ahead and map the drive
'Wscript.Echo strDriveLetter1 & " exists: " & DriveExists
If DriveExists = False Then objNetwork.MapNetworkDrive _
strDriveLetter1, strRemotePath1
call ShowExplorer ' Extra code to take you to the mapped drive
' Appends a colon to drive letter. 1 means number of letters
strDriveLetter1 = Mid(strAlpha, intAlpha,1) & ":"
' If the DriveExists, then it is necessary to
' reset the variable from true --> false for next test loop
If DriveExists = True Then DriveExists = False
Next
WScript.Echo "Out of drive letters. Last letter " & strDriveLetter1
WScript.Quit(1)
Sub ShowExplorer()
If DriveExists = False Then Wscript.Echo strDriveLetter & " Has been mapped for archiving"
If DriveExists = False Then objShell.run _
("Explorer" & " " & strDriveLetter & "\" )
If DriveExists = False Then WScript.Quit(0)
End Sub
Now the above script will find the next availabe letter and map one location to it...I still havent worked out to create another loop for it to do it again. It obviously also requires that you already be authenticated to map to that location.
I looking for some help on how to marry these to scripts together.
Thanks
Ali

Hi Ali
Here is some code that will enumerate two free adjacent drive letters. It starts searching from "C" all the way to "Z" for two drives letters that are adjacent and returns the results in an array then echos the results. You can easily adapt this code to
map your network drives to each drive letter. Hope that helps
Cheers Matt :)
Option Explicit
Dim objFSO
On Error Resume Next
Set objFSO = CreateObject("Scripting.FileSystemObject")
ProcessScript
If Err.Number <> 0 Then
WScript.Quit
End If
On Error Goto 0
'Functions Processing Section
'Name : ProcessScript -> Primary Function that controls all other script processing.
'Parameters : None ->
'Return : None ->
Function ProcessScript
Dim driveLetters, driveLetter
If Not GetFreeDrives(driveLetters) Then
Exit Function
End If
For Each driveLetter In driveLetters
MsgBox driveLetter, vbInformation
Next
End Function
'Name : GetFreeDrives -> Searches for a pair of free adjacent drive letters.
'Parameters : adjacentDrives -> Input/Output : variable assigned to an array containing the first two free adjacent drives.
'Return : GetFreeDrives -> Returns True if Successful otherwise returns False.
Function GetFreeDrives(adjacentDrives)
GetFreeDrives = False
Dim drive, driveLetter, drivesDict, i
Set drivesDict = NewDictionary
driveLetter = "C"
'Add the drives collection into the dictionary.
For Each drive In objFSO.drives
drivesDict(drive.DriveLetter) = ""
Next
'Check drive letters C: to Z: for two free adjacent drive letters and set the "driveLetter" variable to the first one.
For i = Asc(driveLetter) To Asc("Z")
If Not drivesDict.Exists(Chr(i)) And Not drivesDict.Exists(Chr(i + 1)) Then
driveLetter = Chr(i)
Exit For
End If
Next
'If two free adjacent drive letters were not found then exit.
If driveLetter = "" Then
Exit Function
End If
adjacentDrives = Array(driveLetter, Chr(Asc(driveLetter) + 1))
GetFreeDrives = True
End Function
'Name : NewDictionary -> Creates a new dictionary object.
'Parameters : None ->
'Return : NewDictionary -> Returns a dictionary object.
Function NewDictionary
Dim dict
Set dict = CreateObject("scripting.Dictionary")
dict.CompareMode = vbTextCompare
Set NewDictionary = dict
End Function

Not Able to see SAP systems in List of Available SAP Systems for Crystal R

Hi All,
We have installed Crystal reports 2008 and SAP integration KIt client software on my machine. I am trying to create Crystal reports based on the BI query and I could see SAP Connections in the 'Create new connections list' but not able to see any SAP systems in the list of 'Available SAP Systems'.
How to Add SAP systems to this list.
Thanks,
Chindam Praveen Kumar.

1. Define an environment variable (user or system) with the name SAPLOGON_INI_FILE . This variable should contain the path to your saplogon.ini file including the file name eg. if the saplogon.ini resides in the folder c:\windows the variable should contain the following value c:\windows\saplogon.ini
2. Open your saplogon.ini file using Notepad and go to File->Save as. Choose All Files in the field Save as type and DO NOT change the name of the file. In the field Encoding make sure that UTF-8 is selected.
ingo

Silverfast scanner does not appear in list of available scanners in 'import'

silverfast scanner does not appear in list of available devices in 'import' (elements 12)

First of all, have you installed the TWAIN driver?
TWAIN not installed | Photoshop Elements 9 and later

Change the list values

hi friends,
i generated a list and now i need to change the values in the list, and then this changes should be seen in database, could anyone could help me

Hi,
use : write ... format input on.
Re: how to change the list values
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dba46435c111d1829f0000e829fbfe/frameset.htm
A.
Message was edited by: Andreas Mann

Navigation - Edit List

Hi All,
I have created a new assignment block.
It allows user to enter data in create mode.
It displays the data when users search for it.
However, we have one more thing Change mode.
Please help me how to get the "Edit List" bustton in display mode (As other assignmet blocks have).
Regards,
Novice

buttons are usually inserted in the DO_PREPARE_OUTPUT method of your controller
there you can check if IV_FIRST_TIME is true, then fill a global table containing your buttons
in the view layout you specify this global table in "buttons" parameter of your config table

[Solved]How to list groups available

I added my own user to my Arch setup. How would I get a list of available groups so I could add my user to them?
Last edited by jordanwb (2008-09-08 02:01:18)

Misfit138 wrote:
kensai wrote:edit "/etc/group", add your username in front of the group you want to be in.
hehe
The 'Slackware Way'...
Old habits, hard to break. Let me install Slackware on Virtualbox, I miss it.
Last edited by kensai (2008-09-08 02:17:40)

Multiple windows open in safari when click on web site. Also can't change/edit DNS servers or any other changes in advance window of network tab

macbook pro
osx - mavericks
multiple windows open in safari when click on web site. Also can't change/edit DNS servers or any other changes in advance window of network tab.
Basically every time i click on website other windows open and get redirected to other websites selling something (same as that mackeeper site which seems to open often) Really ***** as in just a few minutes on the web I have many windows open and many are the same pages. Can't make changes in the advanced tab of network as options are greyed out and the + & - symbols do nothing when clicked. Hope there is an easy answer as surfing net is really sucking right now

I hope to get some more info on a similar situation.
I have a new Mac Pro, less than 2 months old. OSX 10.5 updated to 10.5.2. Quicktime updated too. When I use the Desktop and Screen Saver system pref, I can easily select and use one of the Apple supplied desktop pictures as a desktop background.
But I wish to use a Photo from an iPhoto (iLife 08) folder / album as the desktop background. I can find all the albums, I can see all the icons for the pictures, I can select an iconed pciture and it appears in the top left of the preference pane (showing the effect of "fit to window" or "stretch to fit", etc). But all I get is a pale blue screen (which might be my default desktop colour). I don't get any of my iPhoto album pics to appear as a dektop background.
There is one minor note on this, I don't keep the pictures in my iPhoto Library, I just reference them, and the originals are on a different internal disk.
I've tried the suggestions above, trashing finder and desktop plists, killall Finder, etc. restart. Nothing gets it working again. It did work originally, for most of the time I've had the Mac Pro, then I changed the dektop to an Apple supplied picture of Earth.
This affects both an Admin, and a standard user. The photos (and enclosing folders) are read / writable by the admin user, and readable by the Standard user. Both users can easily access the photos in their iPhoto. They open the original files on the second internal drive, and performing a right click - Show File shows the original file as expected. I've even emptied the iPhoto library completely and rebuilt it, just in case there was an issue here.
Any ideas ? or anyone else seen this ? I don't really want to start reformatting disks and reinstalling the OS, but any suggestions short of this are extremely welcome.

List of available com ports on Labview based on Vista

Hi,
Labview 8.5 on Vista is behaving different to the one on XP, in terms of showing a list of available COM ports on the drop down Port Resource name.
What is the actual reason and can it be rectified?

Can you post a couple of screen shots of what you mean?
(Preferably .png or .jpg files. Not .bmp's. And not screenshots embedded in a word document please.)
Message Edited by Ravens Fan on 03-09-2009 07:44 PM

Editable list box

How editable list box can be made in jsp

What do you mean by "editable"?
Do you mean that the contents of the list will change depending on other input from the user, or do you mean that the user can actually change/edit the contents of the list while being displayed?

Change / edit list of available driver in cf admin

Similar Messages

Maybe you are looking for