Change Front End Type

hi Gurus,
my question is i want to open pdf file in ecl viewer so that i can edit that file.
but when i am selecting change front end type, it is giving me error.
change front end type not possible if network is DEFAULT
is there any other way to open pdf file in ECL viewer for editing , makups etc etc
thanks
Amit

Amit,
U need to enter EAIWeb.webviewer2D.1 %SAP-CONTROL%assign in Application (path and pragram) in define workstation application for data carrier pc in DC30 for PDF.
Please remove %auto% from path fielf for pc.
Plz revert back if u require further information
Pramod
Plz award pts if it solves ur query.

Similar Messages

Tree table is not reflecting the updated model data changes at the front end

I have two tables ,
1) Provider table(tree table) 2)member table
I have implemented drag and drop functionality using jQuery UI on both tables.
In my scenario when I drag a member from the member table and drop it on the Provider table and also when I delete an assigned member from the provider table I will update the data fetched from odata model and again I will call the method which binds the data to the provider table so that the table will reflect the changes.
here is the code,
on drop:
$("#Provider tbody tr").droppable({
drop: function(event){
oController.AssignMember(oProviderId, oMemberId)
}).disableSelection();
Assign member function: here am updating the model.
AssignMember : function(oProviderId, oMemberId){
var oModel = new sap.ui.model.odata.ODataModel("../../../services/provider.xsodata/", true);
var oParameters = {};
oParameters.PROVIDER_ID = oProviderId;
oParameters.MEMBER_ID = oMemberId;
oParameters.CREATED_ON = new Date();
oModel.setHeaders({"content-type" : "application/json;charset=utf-8"});
oModel.create( "/PROVIDERMEMBERS", oParameters, null, function() {
var oController = sap.ui.controller("adsm.provider.member_assignment_view");
oController.GetProviderData();
},function(jqXHR) {
var errorMessage = jqXHR.response.body;
var jsondata = JSON.parse(errorMessage);
sap.ui.commons.MessageBox.alert(jsondata.error.message.value);
GetProviderData function: here i bind the data to the table
GetProviderData: function(){
var oModel = new sap.ui.model.odata.ODataModel("../../../services/provider.xsodata/", true);
var Context = "/PROVIDERS?expand=ASSIGNEDMEMBERS&$select=NAME,ID,ASSIGNEDMEMBERS/NAME,ASSIGNEDMEMBERS/ID,ASSIGNEDMEMBERS/PROVIDER_ID";
var oTable = sap.ui.getCore().byId("tblProviders");
oModel.read(Context, null, null, true, onSuccess, onError);
function onSuccess(oEventdata){
var outputJson = {};
var p = 0;
var r = {};
if (oEventdata) {
r = oEventdata;
try {
if (oEventdata.d){
r = oEventdata.d;
} catch(e){
//alert('oEventdata.d failed');
try {
if (oEventdata.d.results){
r = oEventdata.d.results;
} catch(e){
//alert('oEventdata.d.results failed');
try {
if (oEventdata.results){
r = oEventdata.results;
} catch(e){
//alert('oEventdata.results failed');
$.each(r, function(i, j) {
outputJson[p] = {};
outputJson[p]["NAME"] = j.NAME;
outputJson[p]["ID"] = j.ID;
outputJson[p]["PROVIDER_ID"] = j.ID;
outputJson[p]["DELETE"] = 0;
var m = 0;
if (j.ASSIGNEDMEMBERS.results.length > 0) {
$.each(j.ASSIGNEDMEMBERS.results, function(a,b) {
outputJson[p][m] = { NAME: b.NAME,
ID : b.ID,
PROVIDER_ID: b.PROVIDER_ID,
DELETE: 1};
m++;
p++;
var oModel = new sap.ui.model.json.JSONModel();
oModel.setData(outputJson);
oTable.setModel(oModel);
function onError(oEvent){
console.log("Error on Provider Members");
oTable.bindRows({
path:"/"
Its working fine in chrome but in IE the model data gets updated but the table is not reflecting the changes at front end.Can anyone suggest me a possible solution to fix this?
Please have a look at the attached screen shots.
Best regards,
Amala Suganya.

Hi Amala,
I think this will help you:
Disabling Cache for CRUD/FI OData scenarios for a UI5 Application on Internet Explorer
Kind regards,
RW

To change the layout of the front end

I am working in c projects it is a web enabled server at the front end and at the back end it is sap
I have to make changes in front end to add two i/p fields and backend it should update the sap table
Please help
Regards
Abhijit Chitre

Hi,
Welcome to SDN.
Could you give us information about the web application on the front end, is it using BSP ?
It sounds like you want to modify the standard, is that OK for you ?
Have you already located the BSP application (if any) in charge of the processing ?
Best regards,
Guillaume

Upgrading PCRs (Personnel Change Requests) front end technology

Hi All,
We are currently on Netweaver 7.0 & ECC 6.0 and ESS - MSS Business Package 50.4. We are using JSP Forms on portal front for Personnel Change Requests (PCR's ) where in all the scenarios in the backend are heavily customised. For certain scenarios, where in a huge amount of information is fetched from ECC 6.0 backend system, JSP are performing really bad and the total time taken to display the form is actaully causing a lot of irritation to the end user.
We are planning to propose an upgrade to SAP adobe interactive forms. The prerequisite is that the business wants to reuse all the customised scenarios without any changes and just want to move towards better front end forms.
My questions are:
1. Please list benefits of SAP Adobe interactive forms over JSP forms (performace wise)
2. Issues with SAP Adobe Interactive forms?
3. Any other options available for UI that can be suggested?
All suggestions are welcome. Quick response is appreciated.
Thanks a lot for your time and help.
Best Regards,
Anupama

Adobe form for sure has performance issues ... Look at the below post
Hiring Adobe Form-Performance problem
Have you tried with WD ABAP. Since your application is dealing with data from backend, I think WD ABAP should suit your purpose. You will have much better handler over the data in this case.
Regards,
Mahesh
Edited by: Mahesh Krishnapillai on Jan 4, 2012 4:35 PM

Urgent-change the end date for a existing wage type.

Hi,
Can u pls let us know how to change the end date for a existing wage type.
The current end date is 30.8.2008 and we would like to change to 31.12.9999.
Rgds,

Use This report RPCLGV00
The Wage Type Distribution report enables you to display wage types for several payroll periods. It does not take into consideration differences resulting from retroactive payroll. The report shows the current values (number and amount) for each wage type. The report evaluates the payroll records that are marked with update indicator A when the report is run. Subsequent reporting runs may not give the same result if - in the intervening period - retroactive payroll has taken place for the evaluation period. The wage type distribution uses the data from the results table RT for the relevant payroll result. The employees organizational assignment is also evaluated from the payroll result. This data is taken from the Work Center Basic Pay table (WPBP).
The wage type distribution offers you the following options for evaluation:
Individual reporting for a specific personnel number or name.
Totals evaluation without specifying a personnel number or name.
You cannot use wage type distribution to run a report for several countries. You can only select payroll areas from one country for reporting.
Scope of Function
You use the following parameters to determine how the appearance of the wage type statement:
Wage type for evaluation
Enter all wage types that are to be evaluated. If you do not make an entry here, the system selects all wage types. Note that you can only select wage types that occur in the RT table.
Evaluation start date
Evaluation start date and evaluation end date define the evaluation period. Enter the year and payroll period for the start of the evaluation.
Evaluation end date
This parameter delimits the evaluation period. If you do not make an entry here, only the period from the period from the parameter Evaluation start date is evaluated.

Can i change my Exchange 2003 organization to NATIVE MODE if my Front-End Exchange server is Windows 2000 Server

I am planing to upgrade from exchange server 2003 to exchange server 2010. I understand 2010 can co-exisist with 2003, but my 2003 organization must be in NATIVE MODE, not a problem because i don't have anymore MS Server 2000 domain controllers, they
were decommisioned a few moths after we moved to AD. However my Front-End exchange server that sits on my DMZ is running Exchange server 2003 on Windows 2000 Server.
Can i change my Exchange 2003 organization to NATIVE MODE if my Front-End Exchange server is on the Windows 2000 Server OS? If not, will i have to setup a new Front-End Exchange server on at least Windows Server 2003 to replace the 2000 server setup?
It's been a very long time since these servers were configured so i may need help setting up a new Front-End server if it will be required.
thanks
B
Bobby

My apologies for the very, very late reply, is have made the change to native mode for my
Exchange environment, email is working fine, no problems. Thanks Cheng.<o:p></o:p>
I ran the Exchange 2010 Pre-Deployment Analyzer tool yesterday, and it showed that the
Active Directoy Forest is not Windows Server 2003 native. The domain forest
functional level showed the level to be "Windows Server 2003", is
just wanted to verify this.<o:p></o:p>
Our corporate AD has one Root domain, (I’ll call it, Corp.com) and one child
domain, (I’ll call it, na.corp.com). na.corp.com is functioning at Server 2003,
the Forest of Corp.com, as the analyzer found, shows a functional level of
Windows 2000. All Windows 2000 PDC have been off the network for almost 9
years, and were properly demoted and removed. I guess the one place is didn't
look was at the Forest level.<o:p></o:p>
I opened the AD Sites and Service mmc plugin on the corp.com server and did find the old
Windows 2000 PDC listed with the Servers. I drilled down into the containers
for the old server, deleted everything, and was able to delete the W2K PDC. I
still cannot raise the Forest level however.<o:p></o:p>
I also noticed that domain replication has errors, (8614, 1908, 1256, and 8606), so i
have a bit of a mess, and i am not sure how to fix it. I will post this on the
Exchange 2010 upgrade, and AD forums for assistance, but i wonder if i need
paid assistance.<o:p></o:p>
Thanks again Cheng
B<o:p></o:p>
Bobby

Change colour of OFSA application front end

How to change the OFSA application front end colour code. Also let me know how to find out the colour code. Please help.

Hi,
You can access the document from My Oracle Support website -- https://support.oracle.com
Please note you need to have a valid CSI number and username/password. Posting the contents of MOS documents violates Oracle support agreement policy.
Thanks,
Hussein

How do I change the front end (letters) of my Cloud e mail address?

How do I change the front end (letters) of my iCloud e mail address?

You can't change an iCloud email address without creating a new account. You can, however, create an @icloud email alias address that will receive email in your current iCloud inbox. This article explains how: http://support.apple.com/kb/PH2622. If you create an alias address, it can't later be used to create a new iCloud account, nor can it be moved to another account or reactivated should you ever delete it.

Changes to the Back-end....Bringing it on to the Front-end

Hello All,
I would like to know the means of reflecting the changes made to the back-end tables on to the front end. Say we've a departments table and an ADF UIX page displaying the data from it in the front-end... we make certain modifications to the back-end table.. Now how do I bring it on to the already existing front-end UIX page. Could anyone give me a solution for this. Thanks in advance.
Regards,
Arun.V

Hi,
If you have navigated to the employees from selected department (ie, all the employees on the page are from the same department) then you can just drag the department name onto the page to create the bindings and display the department name.
If you are going direct to empoyees in a read only table an easy solution is to create a business component based on a database view that joins the two tables and presents the employee details and the department name.
create or replace view emp_dept as
select e.emp_id,
       e.emp_name,
       d.dept_id,
       d.dept_name
from emp e,
     dept d
where e.dept_id = d.dept_id; If you want to edit an employee then create a view link to a ViewObject which represents just employees using the employee id. On the single record edit page use a message choice to translate the department id into the department name.
Brenden

Performance Point Cascading filter challange - Can it be done? If not, we need to change our BI front end!!

My challenge at the moment is that I need to create a dynamic filter. To explain this is a cascading filter but not your normal cascading filter,
ie, Year/Month/day etc.
Here we have a single Dimension, Organisation. It contains every level of a business,
Site,
Dept,
Company name,
Division
Holding
Strategic Area
From these as a default we have 4 built hierarchies with a different combination of the above.
Activity (Strategic Area, Dept)
Organisation (company Name, site, Dept)
Sites (Division, Site)
Holdings(Holding, Strategic Area, site, Dept)
At any given time we have have additional Hierarchies created within the Dimension, further adding to the hierarchy list.
We now have a challenge where we require our users to be able to in the first filter select the Hierarchy they want to use, ie, Holdings, Site, Organisation
or Activity. This should then cascade to the second filter and contain the relevant hierarchy and levels as a multi select filter. Of course this also needs to be connected to number of graphs, charts and scorecards on the page, dynamically.
I have gone around the houses to get this to work but not having any luck. Tried the variety of filters available, MDX, member selection, tabular,
SharePoint, and attempted to mix and match to get this to work. I cannot find a way but I don't believe this is not possible.
If it is not possible we must look around for another front end solution for our BI Dashboards which I would prefer to avoid. Any response or suggestion
would be much appreciated.
Regards,
Sheb

This is possible within PerformancePoint 2010. Filters can be cascading. There is one restriction that might affect you, and that is the cascade only works on the preceding level. For example, let's say you have 4 filters, Country, County, City, postcode,
that have been set up in PerformancePoint as cascading filters. Now when you choose a country, say United Kingdom, only Counties within the UK will be displayed. That's exactly as you could expect. However, now if you select Norfolk county, all the cities
with "Norfolk" county will be available. That's including the cities within "Norfolk" Massachusetts. This is because PerformancePoint cascading filters only work between two levels.
Here's a link to setting up cascading filters http://technet.microsoft.com/en-us/library/hh272541(v=office.15).aspx
Hope that information is useful to you and the cascade limitation doesn't limit you too much.
Richard

Https front end and http backend

Hi there....I am having a small issue....I have a web app that is https based....I have installed the cert on the CSS, and DNS for this app points to the VIP....the client is wanting to have an https front end, and then load balance in http to the backend servers....the issue I am running into is that this only works if I have an active port 80 rule on that same VIP....if I suspend the port 80 rule and only leave the port 443 rule active on that VIP, it doesn't work....please see appropriate config portions below....Thanks in advance!
Sandeep
ANy suggestions? I have been trying this for a couple of days now...it works fine if the backend sessions are also https, but the client has changed their requirement....
ssl-proxy-list SSL1
ssl-server 1
ssl-server 1 rsakey app1-test
ssl-server 1 rsacert app1-test
ssl-server 1 vip address 10.19.55.10
ssl-server 1 cipher rsa-with-rc4-128-md5 10.19.55.10 81
backend-server 1
backend-server 1 port 81
backend-server 1 server-ip 10.19.55.132
backend-server 1 ip address 10.19.55.132
backend-server 2
backend-server 2 port 81
backend-server 2 server-ip 10.19.55.133
backend-server 2 ip address 10.19.55.133
backend-server 3
backend-server 3 port 83
backend-server 3 server-ip 10.19.55.132
backend-server 3 ip address 10.19.55.132
backend-server 4
backend-server 4 port 83
backend-server 4 server-ip 10.19.55.133
backend-server 4 ip address 10.19.55.133
backend-server 5
backend-server 5 port 85
backend-server 5 server-ip 10.19.55.132
backend-server 5 ip address 10.19.55.132
backend-server 6
backend-server 6 port 85
backend-server 6 server-ip 10.19.55.133
backend-server 6 ip address 10.19.55.133
active
service webserver002:81
ip address 10.19.55.132
port 81
keepalive port 2199
keepalive type tcp
protocol tcp
active
service webserver003:81
ip address 10.19.55.133
port 81
keepalive port 2199
keepalive type tcp
protocol tcp
add ssl-proxy-list SSL1
active
service webserver002:83
ip address 10.19.55.132
port 83
add ssl-proxy-list SSL1
keepalive port 2399
keepalive type tcp
protocol tcp
active
service webserver003:83
ip address 10.19.55.133
port 83
keepalive port 2399
keepalive type tcp
protocol tcp
add ssl-proxy-list SSL1
active
service webserver002:85
ip address 10.19.55.132
port 85
add ssl-proxy-list SSL1
keepalive port 2599
keepalive type tcp
protocol tcp
active
service webserver003:85
ip address 10.19.55.133
port 85
keepalive port 2599
keepalive type tcp
protocol tcp
add ssl-proxy-list SSL1
active
service SSL_Front
slot 2
type ssl-accel
keepalive type none
add ssl-proxy-list SSL1
active
owner app1-test
content app-test_back
vip address 10.19.55.10
add service webserver002:81
add service webserver003:81
add service webserver002:83
add service webserver003:83
add service webserver002:85
add service webserver003:85
balance aca
protocol tcp
port 81
active
content app1-test_front
vip address 10.19.55.10
application ssl
add service SSL_Front
protocol tcp
port 443
advanced-balance ssl
balance aca
active

Thanks for the quick reply....there is another port 80 rule setup for that vip....I was using that to test with the app until I got the front end https rules working....
my port 80 rules just says listen to 10.19.55.10 on port 80 and load balance btwn the webervers on port 8x in the back end...
I am trying to do https front end and http backend....
no where in my SSL config have I configured port 80....but when I suspend that rule it all fails....
I am wondering if the backend server sessions are happening properly?
I don't fully get what you mean by "You need to have the rule in port 443 to match traffic coming from the client and the clear text rule (port 81) to match traffic already decrypted coming from the SSL module"
Haven'tI done that?
Thanks again!
Sandeep

Lync 2013 Front End SIP/2.0 500 Compression algorithm refused

I've deployed a brand new Lync 2013 environment hosted on Windows Server 2012 R2 that is currently in co-existence mode with my Lync 2010 environment.
I have SCOM 2012 monitoring the environment and it recently started reporting that one or more of my front end servers
was in a critical state. Diving into it revealed the following perf counter threshold was being tripped:
Time Sampled: 3/26/2014 2:33:30 PM
Object Name: LS:SIP - Responses
Counter Name: SIP - Local 500 Responses
Instance Name:
First Value: 14287
Last Value: 14340
Delta Value: 53
Using OCSLOGGER.exe on the front end to capture logs, i trapped the following:
TL_INFO(TF_PROTOCOL) [11]9138.1C58::03/26/2014-19:12:39.098.0022c780 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[120713120] $$begin_record
Trace-Correlation-Id: 120713120
Instance-Id: 7D80EB
Direction: outgoing;source="local"
Peer: poolA.contoso.com:63820
Message-Type: response
Start-Line: SIP/2.0 500 Compression algorithm refused
FROM: <sip:poolA.contoso.com>;ms-fe=FEserver1.contoso.com
To: <sip:poolA.contoso.com>;tag=F8B88CAB38613EB380773027C56D94AF
CALL-ID: 986f9f568c794ce39d33d7158376157b
CSEQ: 1 NEGOTIATE
Via: SIP/2.0/TLS 10.154.228.225:63820;ms-received-port=63820;ms-received-cid=C3D7C00
Content-Length: 0
ms-diagnostics: 2;reason="See response code and reason phrase";HRESULT="0xC3E93C0F(SIP_E_REACHED_CONFIGURED_LIMIT)";source="FEserver1.contoso.com"
Server: RTC/5.0
$$end_record
The only recent change made to the front end servers was making the registry change outlined in this article:
http://support.microsoft.com/kb/2901554/en-us so i'm wondering if that has something to do with it.

The MSFT support person said to re-apply CU5 to the Director servers and reboot. Since this is impactful to the environment and I would have to do reboots anyway, I opted to go the route of installing the more recent update so....
Last weekend I updated my Lync environment with what I think is considered CU6, the September 2014 updates for Lync 2013 Server (https://support.microsoft.com/kb/2809243) and still no luck. The front
end servers are fine; no excess SIP 500 errors occurring there but within 30 minutes of removing the SCOM override on the Director servers the alerts started firing again.
I reinstated the override in SCOM for the Directors and had my case with Premier support un-archived. The MSFT support person said if the alerts didn't go away she was going to have to engage the Lync product group for help. We'll see where it
goes from here.
JKuta

OBIEE 11g Front End Calculations with Presentation Variables Error

Hi Guru's,
Long time user first time poster to the forums but hopefully you can help.
I have a requirement to perform an aggregation on certain fields with a dynamic grouping requirement (so users can select which grouping they require ie, sum profit by [outlets or companies or region]).
The approach I am using is a prompt setting a presentation variable with the possible groupings for the calculation as choices, and a column in the report with a formula to SUM("table"."column" by "@{variable}{default}") this also contains a dynamic column name containing the presentation variable too.
Where the column could be profit and the variable prompt options could be outlet, company or region (from the above example).
This is currently separate from the RPD due to the dynamic nature required with groupings changing at run time and is done in the front end.
However on selecting some columns via the prompt I receive this error:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 22027] Union of non-compatible types. (HY000)
This only occurs on some field groupings, and is not a certain type in particular. (Including both short date, short time and varchars).
Any ideas where this problem could stem from?
Regards.

Based on given info: Try this
SUM(cast("table"."column" as int) by "@{variable}{default}")
Pls mark if helps

Lync front end connectivity test fails (SSL certificate / URL problem)

We have a weird problem in our installation where Lync keeps complaining about connectivity issues to external reach proxy on our front end server.
The event log error codes are 41024 and 41026.
Here's the error from the snooper utility:
TL_ERROR(TF_COMPONENT) [0]1A14.0EE4::12/12/2014-10:31:30.901.0000000d (DataMCURunTime,DataProxies.ProcessResponse:1197.idx(601))
(0000000001595A27)Failed poking Proxy error=[The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.], type=[ExternalReachProxy], url=[https://dunords36.du.local:4443/Reach/DataCollaborationRelayWebService.svc]
The problem is that it makes the test with the INTERNAL FQDN (dunords36.du.local) and thus the SSL trust fails as the certificate is for our EXTERNAL FQDN on the front end server! I have verified this by testing the above URL with the external address and
the internal one. With the external one the certificate is OK.
If you're wondering; we do not use a reverse proxy. Instead we just have the firewall change the port and forward the traffic to our front end server. Our lync setup is a NAT'ed setup.
I know about the security risks so this is not what the discussion is about.
I can't find anywhere where i can change the above behaviour and tell lync to make the test on the correct, external FQDN. The settings in the topology builder all seems to be OK. And as you can see it does make the test on port 4443 which in our topology
builder is configured for our external FQDN.

Hi,
Would you please elaborate your Lync Server environment (Standard Edition or Enterprise Edition)?
Please double check if you enter the correct external base URL on Lync Topology.
Please also check if the SAN of FE Server certificate correctly.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Lync Mobile client signs out - Error- IIS reset on Front End - WAS Errors

I have a very limited understanding of Lync dependency's & how to trace the issue I'm now seeing. Would appreciate any direction or information to assist.
We have Primary & Secondary Pools - both pools seem to be effected at different times. The Mobile Clients will error & not sign in until iisreset
is done on the effected Front End.
This issue has started a few weeks ago. Before that this has happened maybe twice in a year.
A few weeks ago we did move the FileStore location of the Primary Front End only (off a Siffs Application store to the local drive of the Primary Front End)– AV scan
exclusion was set for FileStore location.
Also some Windows 2008R2 patches were applied.
The Deployment Wizard has been rerun incase something was broken by MS updates.
The Window Event log is clean apart from:
WAS events: (1 to 4 are grouped)
5013 - A process serving application pool 'LyncUcwa' suffered a fatal communication error with the Windows Process Activation Service. The process id was '24076'. The data field
contains the error number.
5011- The Windows Process Activation Service failed to generate an application pool config file for application pool 'LyncExtFeature'. The error type is '7'.
5189 - A process serving application pool 'LyncIntFeature' suffered a fatal communication error with the Windows Process Activation Service. The process id was '17216'. The data
field contains the error number.
5011 - A process serving application pool 'LyncUcwa' exceeded time limits during shut down. The process id was '12520'.
The Windows Process Activation Service failed to generate an application pool config file for application pool 'LyncIntReach'. The error type is '7'. To resolve this issue, please
ensure that the applicationhost.config file is correct and recommit the last configuration changes made. The data field contains the error number.
Schannel: Same Error event happens twice within a few seconds
ID 36888 -
The following fatal alert was generated: 10. The internal error state is 1203.
ID 36888 -
The following fatal alert was generated: 10. The internal error state is 1203.
From What I’ve read SChannel doesn’t seem to be an issue.
Another set of WAS events:
5011 - A process serving application pool 'LyncUcwa' suffered a fatal communication error with the Windows Process Activation Service. The process id was '19132'.
5011 - A process serving application pool 'LyncIntFeature' suffered a fatal communication error with the Windows Process Activation Service. The process id was
'23876'.
5011 - A process serving application pool 'LyncIntReach' suffered a fatal communication error with the Windows Process Activation Service. The process id was
'9876'.
5011 - A process serving application pool 'LyncExtFeature' suffered a fatal communication error with the Windows Process Activation Service. The process id was
'21804'.
5138 -
A worker process '6620' serving application pool 'LyncUcwa' failed to stop a listener channel for protocol 'http' in the allotted time.
5013 - A process serving application pool 'LyncUcwa' exceeded time limits during shut down.
Our Exchange UM started to generate errors recently but not sure if that’s a result of the iisreset for WWW Pub – but these events don’t match any timing of Front End events:
Windows Process Activation Service
11/13/2014 04:06:37 PM
LogName=System
SourceName=Microsoft-Windows-Service Control Manager
EventCode=7031
EventType=2
Type=Error
ComputerName=Pxxx.xxx.com.au
TaskCategory=The operation completed successfully.
OpCode=The operation completed successfully.
RecordNumber=62445
Keywords=Classic
Message=The Windows Process Activation Service service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 0 milliseconds: Run the configured recovery program.
World Wide Web Publishing Service
11/13/2014 04:06:37 PM
LogName=System
SourceName=Microsoft-Windows-Service Control Manager
EventCode=7034
EventType=2
Type=Error
ComputerName= Pxxx.xxx.com.au
TaskCategory=The operation completed successfully.
OpCode=The operation completed successfully.
RecordNumber=62444
Keywords=Classic
Message=The World Wide Web Publishing Service service terminated unexpectedly. It has done this 2 time(s).
I’m not sure where to go with this now. Any direction would be appreciated.
Thank you

Hi Davej006,
Web sites and Web applications depend on the availability of Internet Information Services (IIS) application pools. IIS application pools in turn depend on the Windows Process Activation Service (WAS). If WAS is not running or errors occur
during the startup or shutdown of an application pool, Web sites and Web applications may not be available.
And based on my understanding, if some program works sometime and does not in other times, RAM is the problem.
You could refer to the following article to troubleshoot your problem.
http://technet.microsoft.com/en-us/library/cc735271(v=ws.10).aspx
Hope it can be helpful.
Best regards,
Eric

Change Front End Type

Similar Messages

Maybe you are looking for