Change HTTP endpoint

Dear Gurus,
I am trying to change the URL HTTP endpoint of the wsdl when I publish web service to the service registry. Is it possible and how?
Thanks.
Bob

Hi Bob,
if this is a question - please mark the thread as a question as now it does not have question status
Regards,
Michal Krawczyk

Similar Messages

Change adapter endpoint from em console

How change adapter endpoint from em console ?

You can also try as per the below post.
http://www.albinsblog.com/2012/01/oracle-soa-11g-changing-service.html
Thanks,
Vijay

SERVER.XML re-write problem when changing HTTP to HTTPS

Hello,
I am using SUN ONE App server and had a problem with turning SSL on in order to use HTTPS.
What I did was that in GUI I selected a http listener under my instance and checked SSL/TLS Settings. I clicked Apply Changes button and I got a message saying that there wa a problem with XML-DOM. I checked my server.xml and found that its size was 0. It seems that it stopped re-writing it when it met the problem.
An interesting thing is that when I created an additional http listener with SSL at a different port, there was no problem.
It seems that the problem occurs only when I tried to change HTTP to HTTPS.
Is there anyone who can tell me why this happens?
I will appreciate any answers or comments.
Thanks

Hi,
Is your Implementation Class is still the same (as the old one), when you changed the pre-fix.
Just double click on the Implementation class and check whether the methods are still implemented or not.
Thanks, Advay

[svn:bz-trunk] 16395: Bug: #2621264 [Regression] Small messages not working with NIO-HTTP endpoints in LCSD/trunk.

Revision: 16395
Revision: 16395
Author:   [email protected]
Date:     2010-06-02 05:00:56 -0700 (Wed, 02 Jun 2010)
Log Message:
Bug: #2621264 Small messages not working with NIO-HTTP endpoints in LCSD/trunk.
QA: Yes
Doc: No
Checkintests: Pass
Details: This is the BlazeDS side of the fix. This wasn't a regression, it probably never worked correctly. So, in the scenario where there's a Producer and a Consumer, and Producer sends a message for the Consumer, there are 2 messages from the server. The ACK message for Producer's send, and the actual message Consumer receives. I found that the ACK message was in small form, but the actual message was not in streaming messages. This was because we never really tried to convert streamed messages into small messages before.
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseStreamingHTTPEndpoint.java
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/StreamingAMFEndpoint.java
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/StreamingHTTPEndpoint.java

Change http response code

how can i change http response code?
pls

i used
response.setStatus(HttpServletResponse.SC_BAD_REQUEST);but when i capture the packets from ethereal i'm getting
0000   00 14 38 c2 4f c7 00 90 7f 05 e7 50 08 00 45 00 ..8.O......P..E.
0010   02 40 0a 70 40 00 e7 06 37 fc c0 c3 cc d8 c0 a8 [email protected]@...7.......
0020   01 07 00 50 f3 d6 72 7c 82 f2 e1 3d 48 a0 50 10 ...P..r|...=H.P.
0030   06 8e 9d 89 00 00 48 54 54 50 2f 31 2e 31 20 32 ......HTTP/1.1 2
0040   30 30 20 4f 4b 0d 0a 44 61 74 65 3a 20 54 75 65 00 OK..Date: Tue
0050   2c 20 32 31 20 4e 6f 76 20 32 30 30 36 20 30 37 , 21 Nov 2006 07
0060   3a 32 33 3a 30 38 20 47 4d 54 0d 0a 53 65 72 76 :23:08 GMT..Servand also the error which i wrote is not comming in the body part.
whats seen is
0160   59 50 45 20 68 74 6d 6c 20 50 55 42 4c 49 43 20 YPE html PUBLIC
0170   22 2d 2f 2f 57 33 43 2f 2f 44 54 44 20 58 48 54 "-//W3C//DTD XHT
0180   4d 4c 20 31 2e 30 20 54 72 61 6e 73 69 74 69 6f ML 1.0 Transitio
0190   6e 61 6c 2f 2f 45 4e 22 20 22 68 74 74 70 3a 2f nal//EN" "http:/
01a0   2f 77 77 77 2e 77 33 2e 6f 72 67 2f 54 52 2f 78 /www.w3.org/TR/x
01b0   68 74 6d 6c 31 2f 44 54 44 2f 78 68 74 6d 6c 31 html1/DTD/xhtml1
01c0   2d 74 72 61 6e 73 69 74 69 6f 6e 61 6c 2e 64 74 -transitional.dt
01d0   64 22 3e 0a 3c 68 74 6d 6c 3e 0a 20 20 20 20 0a d">.<html>.    .
01e0   3c 68 65 61 64 3e 0a 09 09 3c 74 69 74 6c 65 3e <head>...<title>
01f0   48 54 4d 4c 20 50 61 67 65 3c 2f 74 69 74 6c 65 HTML Page</title
0200   3e 0a 3c 2f 68 65 61 64 3e 0a 0a 3c 62 6f 64 79 >.</head>..<body
0210   20 62 67 63 6f 6c 6f 72 3d 22 23 46 46 46 46 46   bgcolor="#FFFFF
0220   46 22 3e 0a 54 68 69 73 20 69 73 20 74 65 73 74 F">.This is test
0230   2e 68 74 6d 6c 20 70 61 67 65 0a 3c 2f 62 6f 64 .html page.</bod
0240   79 3e 0a 20 20 20 20 0a 3c 2f 68 74 6d 6c        y>.    .</htmlsomething like this...i'ven't copied fully...

[svn:fx-trunk] 14719: Bug: LCDS-1522 - RTE running reliable messaging test over NIO HTTP endpoint caused by checkin 272187 .

Revision: 14719
Revision: 14719
Author:   [email protected]
Date:     2010-03-12 02:20:41 -0800 (Fri, 12 Mar 2010)
Log Message:
Bug: LCDS-1522 - RTE running reliable messaging test over NIO HTTP endpoint caused by checkin 272187.
QA: Yes
Doc: No
Checkintests: Pass
Details: Checkin 272187 fixed small messages to work on NIO HTTP endpoints but this exposed a bug in HTTPChannel. HTTPChannel is not supposed to support small messaging feature but there was one place where small messages feature were still being enabled which caused the bug.
Ticket Links:
    http://bugs.adobe.com/jira/browse/LCDS-1522
Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/channels/HTTPChannel.as

How can I change HTTP port in J2EE

Hi.
I installed Sneak Preview 640 and I want to change HTTP port for J2EE. (default port is 50000)
So, I started config tools and move to dispatcher -> service -> http -> port.
There is port information.
- Custom value : empty
- Default value : (Port:80,SocketQueue:200,AcceptingThreadsCount:10,BindAddress:,Type:http)(Port:443,SocketQueue:200,AcceptingThreadsCount:10,BindAddress:,Type:ssl)
My first question is that default port is "80" in above confirguration. Why we use "50000" ?
Second question is that I changed custom value but It doesn't work. How can I change HTTP port ?
Regards, Arnold.

you can use the "visual administrator" to set your http-port, too:
Dispatcher / Services / HTTP Provider / Ports
kr, achim

Help with SQL Server 2005 http Endpoint

I am trying to use mx:webservice to directly connect to a SQL
Server 2005 HTTP Endpoint. Is this possible. Is there going to be a
problem with crossdomain issues? If the Endpoint is actively
listening on port 80 then IIS cannot. So I cannot place
crossdomain.xml in webserver, how will I overcome this crossdomain
problem? Am I making this more complicated than it is? If anyone
has an example it would be appreciated. All I want is a flex2 app
talking directly to sql server. Seems possible.

Kent, I see that many others have reported that error (doing
a google search), but I see no ready answers. I saw something that
reminded me of a connection string value that I've seen answer some
problems. May be worth a shot for you: try adding this string to
the connection string (in "advanced options") for your datasource:
AuthenticationMethod=Type2
If it doesn't solve it, remove it. But keep it handy in case
it ever may help with some other problem.
Here's one other possible answer for you:
http://www.webmasterkb.com/Uwe/Forum.aspx/coldfusion-server/3206/SQL-Server-2000-Windows-A uth
Sorry I can't be more clear for you.

How do i change http max connections, http persistent, pipling to true, and proxy pipling to true

how do i change http max connections, http max persistent, pipling to true, proxy pipling to true.

Simpler question: Can I change the max connections in Flex?
Thank you.

Change HTTP cdentials in wss_http_token_service_policy

I want to change http credentials from default weblogic/welcome1(provided during creating the domain in SOA 11.1.1.3) to something else.
Please suggest the configuration steps.
I've already created a new map oracle.wsm.security but whatever the credentials I've provided there is not working.
Thanks,
Shreekanta

Hi User,
Looks like the policy manager is down.Can you try this,
Step 1- Login to EM
Step 2 – Expand Internal Applications ->wsm-pm(Admin Server)
Step 3– If the Policy Manager is down; Restart the wsm-pm application by right clicking on wsm-pm
Step 4- To verify that the Policy manager is up and running, validate the policy manager page with the below url,
http://host:port/wsm-pm/validator
After inputting the Weblogic credentials, It should display the policies.
Rgds,
Dpka

How to change the endpoint url of the siebel service ?

Hi All,
JDev : 11.1.1.5
I am fetching data from the siebel webservice. I created the proxy client from the Siebel WSDL in the JDeveloper. It was working fine.
Now the endpoint URL(Server) is changed. This service fails to connect to that server. The service name is same.
I want to fetch the end point urls from a property file, so that, even again if the server is changed, i have to change it in my property file.
How to change the End point URL at runtime before calling the service ?
This is my endpoint URL.
http://oa8181.us.oracle.com:10800/eai_enu/start.swe/#%7Bhttp%3A%2F%2Fpolicing.oracle.com%2F%7DPolicing_spcQuery_spcIncidents_spcWF?wsdl?SWEExtSource=WebService&SWEExtCmd=Execute&UserName=AUSTINP&Password=AUSTINP
Now it is pointing to this
http://oa8023.us.oracle.com:7777/eai_enu/start.swe/#%7Bhttp%3A%2F%2Fpolicing.oracle.com%2F%7DPolicing_spcQuery_spcIncidents_spcWF?wsdl?SWEExtSource=WebService&SWEExtCmd=Execute&UserName=AUSTINP&Password=AUSTINP
Give me some solution.

See if this helps:
http://kingsfleet.blogspot.co.uk/2008/12/controlling-what-service-proxy-uses-at.html

How to get specific OSB business service HTTP endpoint failover?

I am trying to get the following behavior in an HTTP Business Service in OSB, and I'm not finding the answer (if it exists) in the docs.
I have two backend endpoints, "production" and "backup." I want all request to go to the "production" endpoint unless it becomes unavailable. At which time all requests should go to the backup endpoint - without manual intervention. Automatic failback would be nice but not absolutely necessary. This is what the service provider is recommending for their operational concerns.
Is there some way to accomplish this?
The backup is available at most times, so we can't use round-robin load balancing to get this behavior.
Is this what having a load balancing algorithm of "none" accomplishes? The docs state the order in this case is significant, but not why?
Random-weighted does not work, as it does not allow a zero weight, which means some requests (even if small in proportion) may go to that backup even if the primary is available.

I'm now seeing this in real operation, and I'm seeing something that puzzles me based on the discussion above, and also a behavior I'd like to change if I can.....
First, the puzzlement - of about 6700 invocations over the space of a few hours, I see in the console 9 errors in the primary as configured above, and 9 messages handled successfully by the secondary. So, since the messages are coming on a fairly regular basis (a few per minute, spread over 3 OSB instances), and I have a 10 min retry interval, I would have expected to see a lot more messages handled by the secondary endpoint while OSB instance was waiting 10 min to retry the primary. What's going on here? Does this class of "failure" not take an endpoint "offline?"
Second, behavior I want to change: the errors are apparently intermittent SSL HANDSHAKE_FAILUREs reported by the backend. Is there anyway to get the primary retried first, since we only want traffic to go to the backup if the primary is really offline?
/Steve Elkind
####<Dec 22, 2009 10:45:14 PM EST> <Warning> <Security> <njxymh0099> <SS_ESB_mgd2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1261539914730> <BEA-090497> <HANDSHAKE_FAILURE alert received from fobar-web02.inex.com - 207.235.231.231. Check both sides of the SSL configuration for mismatches in supported ciphers, supported protocol versions, trusted CAs, and hostname verification settings.>

WCF static send port, use of custom behavior to change the endpoint location?

The send port is outbound to various web service endpoints, all of which is the same WSDL just different location. Prefer to use the static port for features like ordered delivery. Is it possible to change the Microsoft.XLANGs.BaseTypes.Address dynamically
by a custom behavior?
https://ninithepug.wordpress.com/

Hi,
You can make static send ports partially dynamic, this can be achieved in a custom pipeline component in the send pipeline.
You should refer to the below mentioned articles:
Adding dynamic behavior to static send ports
Using a Static Send Port like a Dynamic Send Port
Rachit
Please mark as answer or vote as helpful if my reply does

WLS 8.1 Apache Plug-in is changing HTTP status code 999 to 500

I'm seeing the weblogic server 8.1 sp4 apache plug-in change the HTTP status code of 999 (set by the application) to 500 Internal Server Error. I'm seeing this with Apache 2.0.48 on aix and with Apache 2.0.58 on windows. I've tried the plug-in from 8.1 SP2, SP4 and SP6 with all yielding the same result. I've tried the SSL plug-in too - same result. I'm told by the maker of this application that they are not seeing this issue with the plug-in for SunOne/NES. What does BEA say about the Apache plug-in changing the http status code? Why is it doing this? Why doesn't the SunOne/NES plug-in do it? Can you provide a plug-in that does not do this?

Try setting
Debug ALL
inside your IfModule. All proxy activity will be written to /tmp/wlproxy.log (on
unixes). If no info appears in the log, Apache is not invoking the plug-in properly.
HTH
"Lukas" <[email protected]> wrote:
>
I am trying to set up Apache 2.0.49 proxy plug-in for my WLS 8.1 cluster
(2 managed
servers). I followed instructions at http://edocs.bea.com/wls/docs81/plugins/apache.html.
My test web application runs on
192.168.10.142:5001/public/testwebapp
and
192.168.10.142:6001/public/testwebapp
I have tested my cluster using another instance on WLS and HttpClusterServlet
and it works fine.
I have added following section to my httpd.conf
LoadModule weblogic_module modules/mod_wl_20.so
<IfModule mod_weblogic.c>
WebLogicCluster 192.168.10.142:6001,192.168.10.142:5001
</IfModule>
<Location /public/testwebapp>
SetHandler weblogic-handler
PathTrim /public/testwebapp
ErrorPage http://myerrorpage1.mydomain.com
</Location>
I restarted my wls cluster and apache as well and when I specify http://192.168.10.142/public/testwebapp
(apache web server) I receive Error 404--Not Found (even thou I have
tested my
http://192.168.10.142:5001/public/testwebapp and http://192.168.10.142:6001/public/testwebapp
- they work correctly).
There is nothing in apache’s error_log file.
There is a record in access_log file reading:
192.168.10.126 - - [08/Jun/2004:16:23:32 -0700] "GET /public/testwebapp
HTTP/1.1"
404 1214
which gives me an impression that “proxy” – forwarding does not work.
Where should I look for some errors?
Thanks,
Lukas

Missing option to change HTTP request method on iView level

Dear all,
I am trying to implement an iView using the ApplicationIntegrator. Unfortunately I am getting the error message "Request Method POST is not allowed". I found this nice weblog where you have the option on the iView level to change the HTTP request method to "GET". Unfortunately I do not have this parameter.
I am on EP6.0 SP 9.
I really appreciate your help and will reward points.
Thanks,
Jens

I'm not sure I fully follow what the problem is, or I'm misreading the issue.
Just to be clear, you are in Active Directory Domains & Trusts console, you did a click on "Active Directory Domains and Trusts," and then you are saying on the left pane you are not seeing the "Raise Forest Functional Level"
option, such as the following screenshot shows?
I assume there is currently only one domain in the forest.
Was there at any time another domain that was removed, such as a child domain or an additional domain tree, there was removed?
What's the Schema version? To find it, run this without the quotes:
"dsquery * cn=schema,cn=configuration,dc=domainname,dc=local -scope base -attr objectVersion"
Schema Version Matrix:
============================
Version 13 = Windows Server 2000
Version 30 = Windows Server 2003 RTM, Windows Server 2003 with Service Pack 1, Windows Server 2003 with Service Pack 2
Version 31 = Windows Server 2003 R2
Version 44 = Windows Server 2008
Version 47 = Windows Server 2008 R2
Version 56 = Windows Server 2012 RTM
Version 69 = Windows Server 2012 R2
Late Edit:
See the following link for a similar discussion:
Unable to raise forest functional level
https://social.technet.microsoft.com/Forums/windowsserver/en-US/1d777261-ea53-4301-9541-3ea037245986/unable-to-raise-forest-functional-level?forum=winserverDS
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

Change HTTP endpoint

Similar Messages

Maybe you are looking for