Change in Tax percentage

Hi ,
Will any one help to find out following requirement.
Tax percentage in one tax code(tax code V1) seems to be changed in FTXP to 17.5%.If I want to check earlier tax percentage  and date on which it was changed in which table I can get it.
Thanks & Regards
SAP learner.

Hi,
Thanks for reply.I have following queries.
1) STA1 is structure and not table.Can you give table name.
2)You have mentioned go to  Administration->Setup->Financials->Tax->Tax Types.I have search in SPRO but could not get this path.Will you please give detail path in SPRO.
Thanks & Regards
SAP learner

Similar Messages

  • Change of Tax Percentage in Existing Billing documents

    Hi,
    we have created 100's of billing documents with 11% to customers. Later we realized that we should charge them 0% instead of 11%. we have even released them to accounting however we did not receive the payment yet. I made changes so that any billing docs created from today will have 0% percent but my client wants to re-issue all the previous invoices to customers with 0%. I have not worked on any of these but i have few thoughts
    1) Reverse the Accounting Document and Billing document and update the condition type to 0% and re-issue the billing document
    2) There is something called Invoice correction document which issues something like credit or debit memo for the changes in Billing document.
    3) create a utility program to mass change all the billing documents.
    4) I am not sure about this but how about issuing a credit note and then re-issue the invoice but not sure how to re-issue with the modifications in Tax Percentage
    Could you please throw some expert opinions on the above or any other options of consider. Also please advise on configuration settings for any needed.
    Since I have not worked on any of the four, I could not recommend my client about this but needed opinion before actually recommending.

    Hi,
    What you said is right with respect to retrospective billiing.
    In case of credit note, you are not issuing your invoice again. You are just releasing a credit note with respect to the issued invoice. Hence a reference is maintained between these two. This is the best way to follow.
    Raghu

  • Changing the Tax Percentage with an effective rate

    Hi,
    We are going to have new tax percentage w.e.f. 01Jan2008. And we are having a few conditions to be maintained basing on that future tax rate. Can somebody help me in changing the tax rates effective from a future date.
    Thanks & Regards,
    Raghava

    Hi,
    According to me, if you change the error to warning, it wont affect any previous postings but it will allow to extend the tax code to further future postings which is required. So i don't think so that it will affect your existing postings.
    Regards,
    Jigar

  • Mass changes of TAX code in SRM Enterprise buyer

    Hello experts ,
    The TAX code in our country was change from 15.5% to 16.5%.
    We all ready cerate new tax code in SPRO and we need to know what in the best way  to change the tax to ten new one in POu2019S that all ready in process.
    We want to process it as mass changes.
    Pleas gave some advice
    Regards
    Gil shinar

    Hi,
    I dont think there is any mass update function in SRM. This kind of change is generally managed through Business Process Change Management. The old purchase orders should be picked up and updated manually when you cutover to the new tax code.
    Moreover, as the tax calculation is generally done in an external system(Tax system) or in SAP R/3 , why dont you think of changing the tax percentages under the same tax code and drop the idea of creating a new tax code.
    Regard
    Virender Singh

  • Tax Percentage NOT Refresh for MWST Condition when Tax Code Change

    Hi All,
    I have maintained MWST condition on Purchase Order with a default value P1 (10%).
    During data entry, when I attempted to overwrite the tax code to P0 (0%), under Condition tab the tax percentage still showing 10% instead of refresh the rate according to the tax code.
    Is this a config error or system behaviour? Are there any SAP Note that I can apply to fix the problem?
    Applied SAP Note 655335 - ME22 ME22n tax at service level - Doesn't seem to fix the problem.
    Regards,
    Sarah

    Hi
    I think this may useful to U
    Condition Type for Adding VAT  
    Definition
    A condition type that you use to show the VAT amount in the pricing procedure in purchase orders.
    Use
    Customizing
    Create a new condition type, ZWST, in Customizing for Materials Management (MM), by choosing Purchasing ® Conditions ® Define Price Determination Process ® Define Condition Types ® Define Condition Type.
    To do so, copy condition type MWST and make the following settings:
    Description: VAT Amount
    Condition Class: D (Tax)
    Calculation Type: A (Percentage)
    Condition Category: D (Tax)
    In the Changes Which Can Be Made group box, select the following checkboxes:
    Item Condition
    Delete
    Amount/Percent
    Value
    Add the new condition type to the pricing procedure (in the standard system, RM0000), in Customizing for MM, by choosing Purchasing ® Conditions ® Define Price Determination Process ® Define Calculation Schema.
    Create a new entry in the pricing procedure as follows:
    Step: 36
    Cntr (Counter): 0
    CTyp (Condition Type): ZWST
    Man. (Manual Entry): Select this indicator.
    P (Print): S (printed in totals block)
    Reqt.: 10
    AltCty. (Condition Formula): 16

  • Unable to remove/change sales tax in sales order

    Hi Sappers!!
    I are unable to remove sales tax from a sales order.  I have tried to update the sales order by clicking on Header>Conditions Tab>Update-->Double click on G to redetermine the taxes.
    The sales order was entered the same day the Vertex record was input.
    Appreciate your pointers and time!!

    Hi,
    If you want to remove the sales tax from sales order,
    first of all  goto FTXP, give the country, for which you want to change the tax code percentage, and give the tax code and press enter, there it will show existing the tax percentage for that condition type (say earlier it was 10%). Now you want to make it 0% then remove 10 and put it as 0 and save it.
    Next goto condition record VK12 maintaine new tax percentage which you want to change. Like earlier 10% was there but you want to make it as 0%, then maintaine in VK12 tax condition record.
    Now goto your sale order in change mode VA02, and update the procedure using G, then the new tax willbe reflected i.e., 0% will come.
    Hope this is clear
    Reward if helpful
    Thanks
    Praveen

  • Change of tax code determination

    Hello,
    I want to change tax code determination when shipping to customers, where to setup this in SAP ?
    Regards.
    Zied.

    Hi,
    Tax codes come from the Tax Condition records. The general tax condition type is MWST and when you set the condition records for this condition type, you just provide the Tax code. The sysem brings the tax percentage and GL account associated with this Tax code in to the sales document.
    Tax codes are configured in the Trnsaction Code FTXP

  • Customer invoice - change of Tax classification required

    Hi, I wonder if you can help with a query. For most customers we invoice outside the UK, we charge a VAT rate of 0%, which is linked to a tax classification in the customer master record (via XD03). In certain scenarios, we have to charge VAT for the same customer, for example if a training course is carried out for a foreign customer but the training takes place in the UK, we have to charge the UK standard rate of 17.5%. The way we have always achieve this, is that when we know we are going to invoice, we would change the tax classification in XD02, and then update the conditions tab on the sales order. This would in turn update the MWST percentage and allow us to charge the VAT, for this sales order only. The customer record would then be changed back to the previous code, once the invoice was issued.
    For some reason this now no longer works. We have checked that the tax rates are set in VK13, and this all appears to look ok. The material codes in the sales orders have not been amended in any way so I do not think this is an issue.
    This issue only seems to have occurred over the last few months.
    Can anyone think of why?

    Don't you feel the procedure you are following little to complicated for user when these can easily be determine through Condition record.
    I would suggest, you can have 2 different sales area for the training sales in UK and outside (OT) sales.
    Then, VAT tax classification
    VAT - 0 - Not liable for Tax
    VAT - 1 - Liable for Tax
    And say, OT is your existing Sales area for the master data with tax classification VAT - 0 - Not liable for Tax. Then you to extend the customer master for UK sales
    Sales org - Distri Channel
    1000 - UK and there you maintain tax classification as VAT - 1 - Liable for Tax.
    Here, we assume material tax classification is UK as VAT - 1 - Liable for Tax and OT is VAT - 0 - Not liable for Tax.
    Now  add an access to access sequence, say, Sales Org/ DC/ TaxClass1-Cust./ Tax class. material.
    And maintain the condition record in VK11, say,
    Not Liable for Tax - 1000 - UK - 1 - 1 = 17.5%
    Liable for Tax - 1000 - OT - 0 - 0 = 0 %
    And accordingly create you sales order with respective sales areas, w/o much manual intervention.
    Hope this can assist you.
    Thanks & Regards
    JP

  • Change in tax %

    Hi ,
    Will any one help to find out following requirement.
    Tax percentage in one tax code(tax code V1) seems to be changed in FTXP to 17.5%.If I want to check earlier tax percentage and date on which it was changed in which table I can get it.
    Thanks & Regards
    SAP learner.

    Hi,
    You can go to FV13 and the condition type execute then go to enviornment click changes history it will shows all the changed done with this input.

  • UK Payroll TAX percentage of a wage type

    Hi,
    Could you please help me will a way of find the Tax percentage deducted for a wage type. I am running UK payroll and finding a difference in Tax deduction. Your expertise will help me to identify the issue.
    Please help me in this.
    Kind Regards,
    Suresh G

    What exactly is your problem. UK tax is on a cumulative basis, and typically there are slabs with different rates,  so it is difficult too work out a percentage for each wagetype.

  • Change the Tax Code-  In Sales Order i have  Tax code for VAT

    In Sales Order i have  Tax code for VAT ( Condition type JIVP) it is reflecting "P4" instead of "A4".
    Where the "P4" Tax code is picking in Sales Order.
    How to change the Tax Code.
    Urgent

    Hi CHAKRI,
                     Check if the condition record is maintained with the appropriate taxclasssification.If yes, Go to sales order in change mode,then goto-header-billing-alternate taxcalssification and modify tax classification.It will pick up right tax code.
    Regards
    Ram Pedarla

  • FM for changing vendor Tax information

    Hello,
    is there any FM for changing vendor Tax information?
    Thanks,
    Moshe

    read data with VENDOR_READ and update desired date with VENDOR_UPDATE

  • Automatic update of Tax on change of tax driver  in SRM SC and PO

    Hello Experts,
    I ma facing one issue in Extended Classic secenario.
    At the time of creating the SC or PO the tax is calculated from the Vertex . So i already did a setting of calculted Tax in the Backend.
    Now when we create SC or PO the tax is calculated but once the document is created and we cahnge the Tax option form one to another Say form As US 4% to Vendors tax 5% ....So my system is not re-calculating the tax.
    We need to Automatic update of Tax on change of tax driver on SC and PO. Presently this is not a trigger for recalculating tax.
    Smriti

    Closed..

  • Which table stores the Tax percentage rate of commercial invoice?

    Which data base table stores the tax percentage rate of the items in a commercial invoice? Or which FM can return the tax percentage rate?

    HI,
    Don't post the duplicate threads for same requirement...it against to the SCN rules. Moderator can delete this thread.
    Report to Moderator!!!

  • Total tax percentage in table

    Hi,
    We want to prepare one report with tax code and tax percentage.In one tax code different condiiton exists.In such case is their any table in which we can get total tax.
    For example Country code BE    tax code DA  input tax is 10% (condition type MWVS) and non.ded.input tax 10% (condition type MWVN).In such case in which table can we get total tax against tax code DA.Their are different condition types for different tax codes so cannot generalised this.
    Thanks & Regards
    Vinay

    No reply hence closing this thread.
    Vinay

Maybe you are looking for