Change Infoset for Query

Hi ABAPers,
Just curious if we can change infoset for a query that already set up?
Currently I want to change infoset for a query into different infoset, but I can't find the way to do it.
Can anybody advice me how to do that, or is it completely unable to change infoset for a query that already set up.
Thank you in advance
Regards
Hadi

Hi,
If you want to assign a different infoset to query you need to create another query and from there you can assign a different infoset.
Regards,
Nikhil.

Similar Messages

Change logs for query...........

Hi,
How to check the logs for query changes. Means which user has done what change.In properties we get the last user only.
Is there any way to check the full history of changes?
Can we change that in some transport request?
Bye,
Jeetu

Hi,
There is no such facilities available to find, which user has done what changes in the query. you can only get the last changed 's user name of query. in transport request also you cannot change the query.
To add, check out this:
Tcode SQ01>select 'Environement' from the menu>Directories>All Queries
in the popup window, select a query and click on 'Display' button. you would get some useful information about that query
Bye

Is there any change log for query change in BIW?

Hi Buddies,
Could you please tell me if there is a change log in BIW to record all changes made to query and workbook? Since yesterday, I found a very important query had been deleted from our BI system, but I did not who had done this.
Thanks in advanced.
best regards
Patrick

Unfortunately there isn't. Check if you have the query in another system (test, development) and transport it again. You could also check if there is still an entry in RSRREPDIR but I don't think so.
Best regards
Dirk

How to change infoset for a query in SQ01?

hi,
I have created a Infoset which I have assigned to the user group. Now for creating the query using this infoset, how can i
proceed?? Its not giving me the option to change the infoset
and whenever I clicks on 'Create' it shows me the field group
of some other infoset. how can i change it to my infoset which I have created.

Hi,
In SQ01 first you press shift+F7 then find your user group. then from infoset query tab ,select ur infoset.
and do the further processing.
i hope this information will help you.
regards
saurabh

Change area of query and infoset.

Hello experts ,
I have query and infoset that it save in client specific , if i want to transfer them into the Q.A system
Which i must to save them to global area ? if yes , how can i to change area of query and infoset from client specific to global area without create them from the beginning ?
Thanks for your help.
Avi.

No relationships of any sort can exist between objects from different query areas
You have to create the same query from beginning in Global area and then transport it as follows :
1. By using the standard program u2018RSAQR3TRu2019
2. By using the transport option available on the application bar in Transactions SQ02 or SQ03.
Note : Order of transport should be :
                 User Group transport
                 Infoset transport
                 Queries transport
Edited by: harsh bhalla on Mar 26, 2009 11:42 AM

How do I change the underlying query for the task board (and backlog board) on TFS Preview

All,
We work with multi-area projects, each area representing a significant component within the project with its own release/iteration cycle. i.e. Several areas may be active at once, each with different iterations.
When we look at the task board these take no account of the area being worked on. What I need to do is to be able to change the query behind these boards to point to a particular release/iteration for a particular area.
Unfortunately there is no drop down selection on these pages to see this automatically so I need to be able to change the underlying query that populates these boards to get the the area and release/iteration that I need.... but I can't find where these
are.
Using multiple areas is actually highly frustrating with TFS Preview as it doesn't seem geared up at all to make it easy to switch between them... are we doing something wrong?
I think I can do this by changing the current iteration - but I can't work out how to do this either once an iteration for a particular area has started.
Can anybody help?
Thanks

It is not possible to modify the query behind the task board. If I understand you correctly, you would like to filter the task board by area path.
In TFS 2012 we have repurposed the area path field to be the field that determines the team you are working on. We are continuously improving our product and being able to filter your task is one of the improvements that we are thinking of.
Sorry I can't help you better than this for the moment.
Please remember to mark the replies as answers if they help.
Hi Ewald,
We have a similar problem, see the thread "Best approach for multi-team/multi-projects." on this forum. I'm hopping you can help, since so far the different answers doesn't help.
Best Regards,
SYSOTI

Change infoset in sap query

Hi ,
I want to change infoset name in sap query sq01.
I dont want to create new query to change infoset name.
Any other option?
Regards,
Satyen Trivedi

Dear Satyen,
Go to menu Edit-->Other user group, choose the user group, where u have assigned the infoset no give the name of ur query and press create button, it will display all the infosets those are assigned with that user group. Now select ur infoset and start developing the query.
see useful tips:
10 Useful Tips on Infoset Queries
Regards,
Abbas.

Can we change the ABAP QUERY exists in Global area

Hi All,
I have a requirement to add new column in the ABAP query in layout for that I am changing a ABAP query ME80FN which is calling infoset /SAPQUERY/ME80FN defined in the global area ( Environment->query areas->global area).
1) Can I change this infoset and query
or
2) Do I need to follow any other steps.
If I change the existing query in DEV can I transport this to production.
Please clarify.
Thanks,
Jwala

Yes. We can change the background of an input field. The way you do this is by editing the theme that webdynpro application uses. To edit the theme, you will need to install NWDS PLUS the theme edit plugin (Available for download from SAP).
Once you have edited the theme, you will need to upload your theme back to application server. You can use the program : BSP_UPDATE_MIMEREPOS to do this.
Bydefault, the theme used by webdynpro applications is :
/SAP/PUBLIC/BC/UR/nw5/themes/sap_tradeshow
You can apply another theme by calling the webdynpro application with a theme parameter. For example, if my webdynpro application name is "zgopaltest", then
http://<server>:port/sap/bc/webdynpro/sap/zgopaltest?SAP-EP-THEMEROOT=/SAP/PUBLIC/BC/UR/nw5/themes/sap_tradeshow
will apply the sap_tradeshow theme.
Likewise, you can apply diffrent theme. There is another theme that SAP provides. Its called : sap_hcb. Hence, you can apply the theme to the above application by:
http://<server>:port/sap/bc/webdynpro/sap/zgopaltest?SAP-EP-THEMEROOT=/SAP/PUBLIC/BC/UR/nw5/themes/sap_hcb

How to track changes in Adhoc query?

Hi all,
We have requirement for retrofitting the changes done in one Server to other, in the process the Changes in New server should not be overwritten.Currently for Adhoc queries - we're downloading from one server- loading to the New server.
Is there any way to track the changes in Adhoc query to avoid overwriting the changes.
Thanks in advance.
Harika.

Hi,
You can download the Employee wise Bank Details of IT0009 or using Adhoc query
You have employee wise WT reporter
Now do a Vlookup with the Employee Wt report and the Adhoc query.
If you have problems in vlookup
pls send both the files to me on hemant.mahale capgemini com
Regards
Hemant V. Mahale

How to create the layout for query in Bex 3.5

Hi All,
i have one requirement to do layout for query. Report like after passing the variable values and then they will select the required layout. It has to get output according layout selection fields.
i have no idea about how to create layout.
thanks in advance...
Thanks & Regards,
Mallikarjuna.k

Hi Gregor,
In the note 1149346 that you have mentioned, it says -
You must start the input-ready query in change mode.
BEx Analyzer: In the properties of the analysis grid, the switch
"Suppress new rows" must not be set. Furthermore,
the switch "Allow entry of plant values"
must be set in the local query properties.
I have not seen this setting Allow entry of plant values in a query - can you tell what is refers to?

Infoset based Query creating locks on DSO Activations

Hello Experts,
We are current on SAP NetWeaver 7.3 on ORACLE data base version 11.2.0.3.0.
We have a query thats built on top of an infoset ( Based on left outer join on 0material and 0mat_plant) when user executes the query its causing locks on DSO activations.
DSO activations are on hold due to locks on following table RSRNEWSIDS. when BASIS investigated this issue they came up with following reason
executing this infoset based query is causing the locks and if we kill this job the DSO Activations run fine.
The design is as follows
Infoset(0material --Lefter outer Join -- 0mat_plant) ---> MP ---> BEx Query.
Question 1) Is it possible for a query to create locks and cause holds on DSO Activations? if so what would be the reason?
Question 2) Any solution or any of you faced similar issue?
any solution is highly appreciated and rewarded.
Regards,
Vamsi.

Question 1) Is it possible for a query to create locks and cause holds on DSO Activations? if so what would be the reason?
It all comes down to SID if a query needs an association between fact and dimensions it will use SID and if you doing an activation it readjusts the SIDS so needs to be locked for the most up to date data.
Question 2) Any solution or any of you faced similar issue?
Do your query execution before or after DSO activation.
Cheers!
Suyash

Can an Infoset (Adhoc) Query Report be Run using a Variant ?

Hi
We have a lot of users that have access to infoset (adhoc) query tool but where they are not authorised to save queries in the system. They have the ability to create new reports and also open up existing reports using Open query button.
My question is whether the user can run an existing report using the Variant if one exists and how they select to run the report with a variant, and also whether a user can edit a variant for an existing report.
Any help on this would be much appreciated.
Nicola

Hi
The usersd do not have SQ01. They only have S_PH0_48000513 - Ad Hoc Query since SQ01 is a sensitive transaction as access to it should be restricted. Hence our users can go into adhoc query and open existing queries etc.
I do not see any button Execute with Variant when in Infoset (Adhoc) Query view. Might you be able to advise?
Thanks a lot
Nicola

Bind option in report. How to change setting in Query Designer?

Hello,
Is there any way of changing the 'Bind display of textx/attributes in data provider result and in value help' in the portal. We can change this option from the report by right clicking on the characteristic -> Properties -> Characteristic -> Selecting the 'Advanced' tab. But we want to make a permanent change to this option from the query designer so that the users would not have to change it every time they run the report. Can anyone point to where I can make that change in the query designer or anywhere else if that works?
There is a characteristic say 'XYZ'. It has a attribute 'ATTR'. We want to display the attribute alone in the column of the query. We are able to do so by bringing the characteristic 'XYZ' and dragging and dropping the attribute 'ATTR' under it. We then change the display options to make the characteristic as 'No dispaly'. But this affects not just the characteristic in the columns, but also in the Navigational blocks. So the users are not able to see any values while filtering. One way to fix this is to uncheck the 'Bind display of textx/attributes in data provider result and in value help' option after the report is executed which is an end user task. But we want to find out a way of changing this from the query designer, so that the users won't need to carry out his activity every time they run the report.
Any help is appreciated.
Thanks

There are a few ways that you can achieve this. If your SQL Queries have their filters modified (ie. WHERE clause) then this can be easily solved by adding report parameters to the Report filter. Search the in-product help for "Record Filter" and you should get a number of helpful resources returned.Additionally, you can pass in java.sql.ResultSet objects with a populated recordset of the data you want to show in the report. We don't currently provide any tools to assist the creation of the code stubs for thick-client applications (like we do for JSP pages) however you can download a collection of thick-client sample code from here:<a href="http://support.businessobjects.com/communityCS/FilesAndUpdates/crxi_r2_jrc_desktop_samples.zip">http://support.businessobjects.com/communityCS/FilesAndUpdates/crxi_r2_jrc_desktop_samples.zip</a> As I mentioned, this sample contains a collection of code snippets. The one in particular you will be interested in is titled "JRCResultsetDatasource". Hopefully, this will provide you with a few options. Regards, Sean Johnson (CR4E Product Manager)

I have transport Infoset and Query from DEV to QAS

Dear Expert,
I have created an Infoset and Query. My Infoset and My Query have been copied to Query Global Areas and have been transport to QAS server. (I have created Request Transport, the number request is generated by system in DEV)
But when I look with tcode SQ01 and SQ02 in QAS, there are none of my infoset or query appeared.
Please, what should I do?
Best regards,
Dedy.W

Check wether yr request transported correctly since these type of requests generally locked..
After removing lock only we can transport these..
Check in quality..
Tcode.. STMS
Check here for yr request wether transported or not..

Changing LOV VO Query programmatically

Hi All,
I have a requirement where I need to change the LOV query programmatically based on another component on the page. The issue is demonstrated below where I need to change the 'Owner'
LOV query based on 'Owner Type' .
Owner Type : EMP/GRP
Owner : Based on value in 'Owner Type' which is EMP/GRP , two different queries are fired , based on which the LOV should be populated.
Query for Owner incase EMP is selected in 'Owner Type'(EmpLovVO) :
select emp_number, emp_name from emp;
Query for Owner incase GRP is selected in 'Owner Type'(GrpLovVO1) :
select grp_number, grp_name from grp;
I have created two VO EmpLovVO , GrpLovVO and added to the OwnerLovAM . I have written the below code to change the Lov VO in CO(processRequest).
if(OwnerTypeVar.equals("GRP"))
((OAListOfValuesBean)webBean).setViewUsageName("GrpLovVO1");
Can you please let me know what items are to be added to OwnerLovRN and from which VO. Please note the column names are diffent in two VO's and i am using LOV component as messageLovInput. Also let me know if i am missing any step.

Eventhough the column names are different, while creating VOs for for the LOV use alias names and make sure that both VOs have same attributes.
Then in your controller, based on the owner set the VO instance. In your CO code make sure you also handles both EMP and GRP ower types.
Regards,
Peddi.

Change Infoset for Query

Similar Messages

Maybe you are looking for