Change Log not being created

Hello every one
I have implemented the customer master enhancement using the baddis : 'CUSTOMER_ADD_DATA_CS' and 'CUSTOMER_ADD_DATA' , scenario is that, I have added a new tab, to customer master screen and the new screen under that tab has 4 fields, those 4 fields are appended into KNA1 table using append structure.
hence my four fields on screen are:
kna1-zzappno
kna1-zzappdate
kna1-zzfrmno
kna1-frmdate
, the problem I am facing is that, system is not logging any changes in any of the field of the screen, infact when i requested change document from menu, it gives the error: place the cursor on data field, on debugging i came to know that, in the method 'GET_FIELDNAME_FOR_CHANGEDOC' , E_FIELDNAME parameter is coming empty, I tried to pass the value of the field at run time through debugger, which although removed the said error, but returned the message that no field change document exist for the field, where as field's data has been previously changed, now I cannot figure out, how to enable change log recording on the fields which i have added as an enhancement to customer master screen (XD01 , XD02 etc.)..
any help in this regard would of high appreciation,,,
thank you.

Hi,
Change document are only created if the fields is set for change document.
This you set at DATA ELEMENT level. If you go to any table, take any field, double click the data element of that field. On the data element displat screen on the definition tab, you will see a block "Attribute". In this "Attribute" block, there is a field call "Change Document".
The change documents for table fields are only created if this "change document" flag is set. Check the documentation of this flag ( change document ) for more information.
Regards,
RS

Similar Messages

  • Audit Log Not Being Created

    Hi,
    I'm using the workflow application "Audit" as an activity in my custom workflow and I'm passing the required arguments.
    In the workflow trace file, I can see that the Audit application is run using the passed parameters but no record is being created matching that information in the "log" table.
    Any ideas/suggestions?
    Thanks
    Here is the trace for your information:
    Resolved reference requesterWSUser = object
    Assigning requesterFullName = Test1 Manager1
    Action Set Audit Resources List
    Result title set to 'Set Audit Resources List'
    Evaluating XPRESS
    Resolved reference approved = false
    Resolved reference auditApps = [AD_Simulated]
    Resolved reference auditApps = [AD_Simulated]
    Assigning depApps = [AD_Simulated]
    Action Audit
    Result title set to 'Audit'
    Iterating over depApps = [AD_Simulated]
    Iteration 0
    app = AD_Simulated
    Argument op = audit
    Argument type = User
    Argument status = success
    Argument action = View
    Argument reason = User Access Recertification
    Argument subject = TestManager1
    Resolved reference user.waveset.organization = null
    Resolved reference app = AD_Simulated
    Resolved reference app = AD_Simulated
    Argument resource = AD_Simulated
    Resolved reference enduserId = testuser4
    Argument accountId = testuser4
    Resolved reference enduserView.accounts[Lighthouse].firstname = Test4
    Resolved reference enduserView.accounts[Lighthouse].lastname = User4
    Resolved reference enduserId = testuser4
    Resolved reference requesterFullName = Test1 Manager1
    Argument error = The access of the user Test4 User4(testuser4) has been recertified by Test1 Manager1
    Calling application 'com.waveset.session.WorkflowServices'
    Application requested argument op
    Application requested argument logResultErrors
    Application requested argument action
    Application requested argument status
    Application requested argument type
    Application requested argument subject
    Application requested argument name
    Application requested argument resource
    Application requested argument accountId
    Application requested argument error
    Application requested argument parameters
    Application requested argument attributes
    Application requested argument originalAttributes
    Application requested argument overflowAttributes
    Application requested argument auditableAttributesList
    Application requested argument organizations
    Step complete 'Audit'
    Step inactive 'Display Message'
    -------------------------------------------------------------------------

    I agree with the anokun7. Check to make sure the action your are giving it is a valid one. ( See IDM Workflow Forms and Views pdf and search for Action Names, it will give you a list of all the valid actions) Also you can add your own attributes to the Audit object as well using the attributes variable. ( It expects a map: <map>
    <s>Key</s>
    <ref>value</ref>
    <map>
    Value can be a reference, or string, or however complex you want to make it. Just be aware of what view (if any) is available at the time you call the audit. Hope this helps
    Message was edited by:
    dmac28
    Oh yeah..The attributes will appear on the audit log reports, Based on what action and type you audited it will show up on that record. i.e Delete action, on Type User...that audit record will have a changes value which will have whatever attributes you passed to the audit object.

  • Change Pointers not being created for HR-PA Custom Infotype

    Problem Description:
    We have a custom Infotype in SAP to store the data for contingent employee - Infotype 9001. Change pointers is
    turned on. We are running the program RBDMIDOC to send changes to Oracle IDM using message HRMD_A. The change
    detected for all infotypes except 9001. For 9001, the change pointer is not created.
    The following are the current configuration details:
    IDOC Extension Created to Idoc type HRMD_A07 (ZHR_EXT)
    custom segment zhr_seg
    Change pointers are switched on.
    Change pointers switched on for message Type HRMD_A.
    IDOC configuration created for Port / Process code etc.
    Maintenance of view T777D - Added ZHR_SEG.
         If I add the segment ZHR_SEG as a 2nd segment to Infotype 0000, I dont get a syntax error. But the changes for Infotype 9001 are not picked up.
         If I add the segment ZHR_SEG as a segment to Infotype 9001, I get a syntax error - check EDI: Syntax error in IDoc (mandatory segment missing) below.
    EDI: Syntax error in IDoc (mandatory segment missing)
    Message no. E0072
    Diagnosis
    The segment ZHR9001 has the attribute 'Mandatory' in the syntax description of the basic type HRMD_A07 (customer enhancement ZHR_EXT). However, the segment is missing in the IDoc. The segment number logged in the status record identifies the item before which the segment is missing.
    This error may have been triggered by an unidentifiable segment before the expected mandatory segment.
    Procedure
    Please check the IDoc or the syntax description of the basic type HRMD_A07 (customer enhancement ZHR_EXT).

    Were you able to resolve the issue?
    If yes, could you please share what was done to resolve it.
    Your help will be greatly appreciated.

  • Inbox folders not being created from msf files

    Last week, I noticed that my Inbox folder files weren't appearing in my profile. I posted a generalized question here: https://support.mozilla.org/en-US/questions/996903
    The response I received didn't help that much. The folder I created appeared on the remote mailbox as empty folders.
    My mail account is synced via IMAP to a remote Zimbra mail client using STARTTLS. I can view my Inbox. The other folders in my Inbox account are not visible. I can send and recieve messages from my INBOX.
    When I select "Manage folder Subscriptions" In the account options, I can see the folders. When I select them, and click the "Subscribe" button, nothing happens.
    Inspecting my IMAP directory, I see the following structure:
    ~/.thunderbird/13zr0oo0.default/ImapMail/mail.<zimbra_account>.com:
    -rw-r--r-- 1 matthewe matthewe 1238 May 2 10:38 Archives.msf
    -rw-r--r-- 1 matthewe matthewe 1235 May 2 10:38 Drafts.msf
    -rw------- 1 matthewe matthewe 47500385 May 2 09:56 INBOX
    -rw-r--r-- 1 matthewe matthewe 375885 May 2 10:36 INBOX.msf
    -rw-r--r-- 1 matthewe matthewe 25 May 2 08:58 msgFilterRules.dat
    -rw-r--r-- 1 matthewe matthewe 1233 May 2 10:38 Sent.msf
    -rw-r--r-- 1 matthewe matthewe 0 May 2 10:38 site-errors.msf
    -rw-r--r-- 1 matthewe matthewe 0 May 2 09:59 Templates.msf
    -rw-r--r-- 1 matthewe matthewe 2275 May 2 10:33 Trash.msf
    The msf files are created when I click the "Subscribe" button but subsequent Mail files containing the mail data are not (note that non-msf files exist only for "INBOX".)
    Removing .msf files and restarting Thunderbird has no affect.
    When I launch, the errors console reports the following three errors:
    "Could not read chrome manifest 'file:///usr/lib/thunderbird/extensions/%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D/chrome.manifest'.
    -- There is no chrome.manifest file in my filesystem under /usr/lib/thunderbird/extensions/{972ce4c6-7e08-4474-a285-3208198ce6fd}"
    "While creating services from category 'profile-after-change', could not create service for entry 'Disk Space Watcher Service', contract ID '@mozilla.org/toolkit/disk-space-watcher;1'"
    This is reported as https://bugzilla.mozilla.org/show_bug.cgi?id=883621 and has been resolved at https://bugzilla.mozilla.org/show_bug.cgi?id=895964 but my system still throws the error. (I have plenty of disk space. Permissions perhaps?)
    [JavaScript Warning: "Calendar https://mail.zimbrahostedemail.com/home/matthewe@<zimbra_client>.com/Calendar has a dangling E-Mail identity configured."]
    I'm not sure what that means.
    I am using Thunderbird 24.5.0 on Ubuntu 13.10

    Is your question about files not being created, or because you cannot send and receive mail, or both?

  • Log is being created. But whe

    error message on any of these programs:audiohqu.exesurmix2.exectplay2.exectcplfw .exe?Message is "An error log is being created".Love to read the log, but where is it's? I don't see any "*.log" extensions in the Creative subdirectory.

    Hi,
    According to your post, my understanding is that you could not create the Access app.
    Based on the log message, some service application may not be created well.
    You should double check whether the following service applications had been created well.
    Access Services
    Access Database Service      2010
    App Management Service
    Microsoft SharePoint      Foundation Subscription Settings Service
    Secure Store Service
    There is a similar thread for your reference.
    http://social.msdn.microsoft.com/Forums/ie/en-US/18e8f749-3c1d-4d94-8e41-7226a8c2f904/error-creating-access-custom-web-app?forum=sharepointadmin
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • User Profile Disk not being created

    Hi,
    I created a new 2012 VDI collection. Things seems to be working fine except for the User Profile Disks are not being created. From my understanding a .vhdx prefixed with the user's SID is supposed to be created when the user logs into one of the virtual
    machines from the collection. I can see that a UVHD-template.vhdx" was created correctly but when logging on to one of the deployed virtual machines from the pool there is no  other .vhdx files (except the template).
    From what I've read the virtualization hosts must have write access to the share (they do).  I can't seem to find any other requirements. I've searched through event viewer and found nothing. I'm not sure which logs to check on which server.
    Anyone have any ideas what I'm missing?

    Hi,
    Thanks for your post in Windows Server Forum.
    Kindly follow the below mention article and check the necessary steps for creating UPD, try to create new UPD.
    1.  Working with User Profile Disks on Session-Based Desktop Deployments
    2.  Easier User Data Management with User Profile Disks in Windows Server 2012
    Hope it helps!
    Thanks,
    Dharmesh

  • An error log is being created. HELP!!

    I'm trying to rename some folders in my site files, 2 of my
    folder was successfully renamed but 2 of them keeps on stopping
    when it's almost finish updating all the sites that it's associated
    with. The message box says:
    Dreamweaver.exe has generated errors and will be closed by
    Windows. You wil need to restart the program.
    An error log is being created.
    Now, I've restarted my computer and DW a million times. And I
    do not think the folder is the problem because sometimes
    that folder that I want to rename I've successfully renamed
    it but when I try to rename it again it will have this error.
    Is dreamweaver crazy or is it me?
    Thank you..

    I can only download a song or two at a time and then I get the error message.
    hmmmm. it's a little unusual to be getting an itunes crash (with that message) in the middle of a synch.
    let's try enlisting some additional technical help with this one.
    we'll get a crash log from itunes, and send it to so someone who can interpret crash logs.
    Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
    drwtsn32 -i
    And hit return.
    This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
    prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
    generate the crash log, collect the crash log, and send it to this email address
    in the email:
    (1) state the precise version number of itunes that you're using. (go into your "Help > About iTunes" to doublecheck.) also state the version of the ipod updater that you're using, the model of ipod, and the software version on the ipod:
    Identifying different iPod models
    iPod: How to find software version
    (2) include the URL to this thread so that the person who gets the email has some context, but also give as much information about the context of the crashing as you can.
    love, b

  • [svn:bz-trunk] 23143: Certain code needs to check the existence of the class validation validator  (some brokers and other listeners) during message broker init, however the validator was not being created till the very end of the method .

    Revision: 23143
    Revision: 23143
    Author:   [email protected]
    Date:     2011-10-27 06:31:02 -0700 (Thu, 27 Oct 2011)
    Log Message:
    Certain code needs to check the existence of the class validation validator (some brokers and other listeners) during message broker init, however the validator was not being created till the very end of the method.  Promote it to be at the top instead of at the bottom.
    Modified Paths:
        blazeds/trunk/modules/core/src/flex/messaging/config/MessagingConfiguration.java

    Revision: 23143
    Revision: 23143
    Author:   [email protected]
    Date:     2011-10-27 06:31:02 -0700 (Thu, 27 Oct 2011)
    Log Message:
    Certain code needs to check the existence of the class validation validator (some brokers and other listeners) during message broker init, however the validator was not being created till the very end of the method.  Promote it to be at the top instead of at the bottom.
    Modified Paths:
        blazeds/trunk/modules/core/src/flex/messaging/config/MessagingConfiguration.java

  • Reasons for billing documents not being created ?

    I am trying to create a billing document from a delivery (VF01). When I enter document number and save, it says 'no billing documents genereated, see the log'. Where to see the log and what do you think could be the possible reasons for billing document not being created ?
    Thanks in advance,
    Krishen

    Hi,
    In VL02 transaction, Its the 2nd button on the toolbar With an `!` mark on the icon along with triangle. CLick that button. It will display the errors bcz of which delivery is not created.
    In VL01, goto EDIT-> LOG.
    The explanation of errors is usually pretty detailed.
    Best regards,
    Prashant

  • Item Texts Is Not Being Created in BAPI_BILLINGDOC_CREATEMULTIPLE

    Hi.
    I am Using Bapi TO Create Invoice, Every thing is created successfully , but item text is not being created. Code is as below.
    DATA: s_vbap TYPE vbap,
                t_billing TYPE STANDARD TABLE OF bapivbrk WITH HEADER LINE,
                t_datain TYPE STANDARD TABLE OF bapikomfktx WITH HEADER LINE,
                t_return TYPE STANDARD TABLE OF bapireturn1 WITH HEADER LINE,
                t_success TYPE STANDARD TABLE OF bapivbrksuccess WITH HEADER LINE.
          SELECT SINGLE * FROM likp
          WHERE vbeln = v_del_doc_no.
          SELECT SINGLE * FROM lips WHERE
          vbeln = v_del_doc_no.
          t_billing-salesorg = likp-vkorg.
          t_billing-ref_doc = likp-vbeln.
          t_billing-ref_item = lips-posnr.
          t_billing-doc_number = v_del_doc_no.
          t_billing-itm_number = lips-posnr.
    *      SELECT SINGLE fkarv FROM tvak
    *            INTO  t_billing-ordbilltyp
    *            WHERE auart EQ zsoa_so_header-auart.
          SELECT SINGLE auart FROM vbak
                      INTO  t_billing-ordbilltyp
                      WHERE vbeln EQ order_num.
          t_billing-price_date = sy-datum.
          t_billing-ref_doc_ca = likp-vbtyp.
          t_billing-material = lips-matnr.
          t_billing-plant = lips-werks.
          APPEND t_billing.
          BREAK-POINT.
          CLEAR: t_datain.
         t_datain-ref_doc = v_del_doc_no.
          t_datain-ref_item = '000010'.
          t_datain-applobject = 'VBBP'.
          t_datain-text_id    = '0001'.
          t_datain-langu      = sy-langu.
          t_datain-format_col = '*'.
          t_datain-text_line  = 'FSG 2829'.
          APPEND t_datain.
          CALL FUNCTION 'BAPI_BILLINGDOC_CREATEMULTIPLE'
            TABLES
              billingdatain = t_billing
              textdatain    = t_datain
              return        = t_return
              success       = t_success.
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
            EXPORTING
              wait = 'X'.
          LOOP AT t_return.
            itab_msg-type = t_return-type.
            itab_msg-msg =  t_return-message.
            APPEND itab_msg.
            CLEAR  itab_msg.
          ENDLOOP.
          READ TABLE t_success INDEX 1.
          p_i_bill_doc = t_success-bill_doc.
        ENDIF.
      ENDIF.
      CLEAR: itab_so_items, itab_so_items[] , delivery_no , itab_return[].
    So Text FSG 2829 is not being created in Item Text.....

    Hi Tahir,
    You can check with the below thread
    A question of BAPI_BILLINGDOC_CREATEMULTIPLE
    Regards,
    Pawan

  • I've been editing images with ease for a long time but now the changes are not being saved.

    I've been editing images with ease for a long time but now the changes are not being saved.
    Also, it is not liking me adding a large ammount of images in one go?

    Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS.  So to get help you need to give as much information as you can. Basic things like :
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • HT4075 I tried the steps mentioned above but the changes are not being saved.

    I am not able to edit or merge PDF files. I followed the steps mentioned in the Mac support community but the changes are not being saved. Any solution to this?

    The link you posted gives be a 404 not found message. 
    The reason you're getting the repeat is because your site name is wilgenroos.nl and the first page of your site is wilgenroos. 
    The standard URL for domain names that are forwarded with the CNAME method is:
    http://www.domain_name.com/site_name/page_name.html.
    You can change the site and page names in iWeb to give you something more informative about the site and page.
    If you're publishing to a  3rd party server and want to get rid of the site name in the url and only have
    http://www.domian_name.com/page_name.html
    do the following:
    publish the site to a folder on your hard drive (already done)
    use Cyberduck to upload just the contents of your site folder to the root folder of your account on the server.
    You should delete the old site folder and files that are currently there beforehand.

  • XMP files not being created with DNGs...

    I'm used to using Bridge with ACR to process Nikon NEFs. But a recent camera update has me experimenting with converting the D3's NEFs to DNG files and editing them with CS2 and Bridge 1.04 which works better on my system. I've also experimented with CS3 and Bridge 2.1.1.9 with the same DNG files.
    In both cases XMP files are not being created when working with DNG files. I have enabled "Save image settings in : Sidecar ".xmp" files" turned ON. But they do not seem to be generated and I assume the ACR adjustments are being embedded in the DNG file. Meanwhile doing edits on NEF files continues to create .xmp files as expected.
    I find .xmp files to be very useful and I'm wondering why they're missing with DNG files? Are they hiding somewhere other than in the same folder that the images reside in?
    Thanks.
    Russell

    > The information contained in the XMP file is stored in the DNG file so there is no need for a separate file.
    Aww, yuck!! That's a real drag...
    When editing lots of files (yesterday's shoot produced 8GB) I back everything up to off-line storage and then, after doing all my edits and crops in ACR, I only have to copy over the small XMP files which takes no time at all.
    So if I re-edit the DNG with ACR I have to re-copy ALL the files again to the off-line storage.
    I used to sometimes even save 2 versions of the xmp files when I needed 2 different crops of the same images, such as doing a wide screen 'cinema' crop for a corporate client's Intranet presentation of their event, as well as more standard crops to be used for their newsletters.
    Guess I won't be using DNG any more..
    Thanks for the help Kees :-)
    Russell

  • Group Folders not being created

    Hi folks,
    i think this is a simple question: i got Mac OS X 10.4.4 Server with OD and Mobile Homes configured. I set up some custom Groups but the Group Folders are not being created automatically. I think there is a terminal command to do this. Does anyone know that command?
    Greets

    Is it the CreateGroupFolder command?
    (15297)

  • Logs not being generated

    I have two wfe servers, in one server the logs file are being generated but another server no log files only usage files
    what could be the reason. Under central admin monitoring uls logs have been already enabled.

    Hi Rizzk,
    Have you solved this issue?
    Have you checked and added the service account for SharePoint Services Tracing in local group Performance Log Users or Administrators on SharePoint server, then restart this service?
    http://www.justinkobel.com/post/2013/06/07/Solving-ULS-Log-Files-Being-Created-But-Empty-(0-Kb).aspx
    http://sharepointinsight.wordpress.com/2010/04/05/solution-for-zero-byte-sharepoint-2010-log-files/
    Thanks
    Daniel Yang
    TechNet Community Support

Maybe you are looking for