Change of Currency

Hi everyone,
I want to know how to change the type of currency in a report.
They ask me to change the currency from DOP to USD in the report (transaction ME49).
It has been a hassle to me because first of all I'm new in ABAP.
can someone help me?
Thanks in advanced,
Fidel.
Message was edited by: Fidel Peralta

Hi Fidel,
If you have to perform a currency conversion in your ABAP,
you can use these Fucntion Module ( SE37 ):
CONVERT_TO_FOREIGN_CURRENCY
CONVERT_TO_LOCAL_CURRENCY
It's the best way to do that.
Regards,
Erwan.

Similar Messages

  • How to change the currency of the order  while creating the sales order??

    Hi all,
    I am new to this field.I have to create a Sales Order with reference to another
    SO but with different sold to party.Here i also have to change the currency of
    order from dollar to GBP.
    Please assist me to do this.
    Thanks.
    syed

    Hi
    Goto VA01 and try to create the order with reference to the Old order
    and after that order details are copied to the New order then, change the Sold to party and the currency in the Sales order Header and see? whether it allows you to change it or gives some error? then based on that you have to check and do further processing.
    Try and see
    If it won't allows you to change
    then create a New SO with the new sold to and currency and just take the old orders data from VBAK and VBAP tables and enter into the new order fields and save it will be created.
    <b>Reward points for useful Answers</b>
    Regards
    Anji
    Message was edited by:
            Anji Reddy Vangala

  • Change the currency of Operating Concern COPA

    Hi,
    In my SAP environment there are 4 controlling areas. Only one of them is assigned to Operating concern. The remaining 3 have COPA inactive.
    I would like to extend the existing operating concern to remaining 3 controlling areas, but before I do that I need to change the Operating concern currency as the one currently set is only relevant for only one controlling area and company code which is GBP. I need to change it to group currency - USD.
    When I use F1 help on currency field in Operating Concern settings in configuration, I get information that 'once data has been posted, however, a change in the operating concern currency would cause the existing data to be interpreted as if it were posted in the new currency (for example: USD 1000.00 in old currency -> DEM 1000.00 in new currency).'
    Even though we have transactional data posted in that operating concern , it is not being used by any department and we are quite happy to have existing data interpreted in USD instead of GBP. No reports are being generated in COPA currently so it will not be an issue for us. We want new data to be proper and constistent.
    When I try to change the currency in operating concern config, the field is greyed out. I believe there is  more complex workaround for that, but the only note I found on this is  651142 which says that SAP provides different tools to reorganize operating concern. But no further details are included.
    If anybody managed to change operating concern currency, please help me with that.
    Regards,
    Karol

    Hi Karol
    I read the note given by you.. It asks you to contact the SAP for SLO Service (System Landscape Optimization )
    This is a chargeable service by SAP... In case you decide to go ahead with this, do share your experience with us
    Create an OSS msg and give ref of this note... I would suggest to go with SAP service and not with any one else's experiences... The tools that SAP is talking about are available only with SAP..
    You may try to archive the existing data from COPA tables and then see if the currency field opens up for editing.. Am not sure about it..
    Regards
    Ajay M

  • How to change BP currency in AP Invoice using Add On

    Hi !
    I create AP Invoice from my add on project .I used B1 D1 API  SAPbobsCOM.BoObjectTypes.oPurchaseInvoices .
    I choose BP code from my form and then I create AP Invoice .When creating AP Invoice , I want to change BP Currency to other currency .It work well when BP is All currencies type . If BP has it's own currency I cannot change other currency to create AP.
    pl advice me . how to do it ?
    best regards,
    msw

    Hi,
    Can you do it from UI? I believe you can only use other currency if BP is all currency type.
    Thanks,
    Gordon

  • "change over currency in existing company"

    Hi Gurus,
    My client wants to change his currency from CAD to USD for an existing company. Can anybody tell me the impact of changing currency for an existing company to a new currency in a live scenario and configuration settings also.
    Thanks
    jais

    hi,
    Which Currency do u want to change? Company Code, Group Currency Or Hard Currency?
    First of all it is not advisable to change currency but still your client is insisting then change currency from new fiscal year b'coz your whole reporting will be disturb if you will change in between. Also seek advise from SAP.
    thx.
    Ganu

  • Need to have ability to change payment currency in invoice form...

    Hi All,
    I need to have the ability to change payment currency in invoice form.
    For example my invoice currency is USD then I need to select HKD in payment currency option. But right now there is only USD available in payment currency.
    Also I need to know how and from where the type, invoice and payment currency details are automatically fetched when opening the invoice form.
    Thanks,
    R. Bala

    Bala,
    From the User Manual:
    Invoice Currency. The supplier invoice currency is used as a default for new supplier sites you enter. The supplier site invoice currency is used as a default for the Purchasing documents and Payables transactions you enter for a supplier.
    Payment Currency. The default for Payment Currency in the Suppliers window is the value you enter for supplier Invoice Currency. You can change the Payment Currency value only if the Invoice Currency has associated fixed-rate currencies (for example, euro). If the Invoice Currency is a fixed-rate currency, you can change the Payment Currency value to an associated fixed-rate currency. The supplier Payment Currency is used as a default for all new supplier sites you enter.
    The supplier site Payment Currency is the default for the Payment Currency field in the Invoices window. It is also the default currency for invoices you create for this supplier site by using Payment on Receipt, Open Interface Import, and Recurring Invoices.
    Hope this helps.
    Octavio

  • Currency conversion error by changing the currency

    Hi all,
    i am facing a problem by refreshing the query with  another currency. f.e. i am calling the report in Euro and then i say refresh variables and change the currency in USD. So i get the same values and the currency conversion dont work.
    I get the following alert message after i change the currency and run the report.
    Diagnosis
    You attempted to convert a currency. The system cannot find a valid currency into which to convert the value.
    System Response
    The OLAP processor cannot convert the currency. The drilldown is not changed.
    Procedure
    Specify a valid target currency.
    Procedure for System Administration
    This message can only appear for Web templates in which currency conversion is set manually (using the SAP BW URL). If this message appears following a currency conversion dialog box, an SAP error has occurred; report this error using OSS.
    Can someone help me before i open a OSS error. Thanks.

    Hi,
    did you check the setting  in BI for source system ?
    Else just try it
    RSA1 - goto source system
    Expand SAP
    Context Menu of Source System
    There are
    Global Settings
    Transfer Exchange Rate
    Hope it will help you ...
    BVR

  • Change of currency in cost center

    Hi
    After creating a cost center if we wanted to change the currency, the system is not allowing to edit it. Can any let me know where will this be controlled. And how to do it.
    Thanks and Regards
    Sri

    Hi,
    If you post any value to the cost cemtre then you will not be able to change it. Block this cctr for posting and open a new cctr.
    Regards

  • Change PO currency accordingly to PR currency

    Hi expert,
    I got requirement to change PO currency accordingly to PR currency on Delivery/Invoice tab in ME21N once user enter PR number and PR item number. I am not sure whether this scenario can be done in ME21N. I've did some debugging on userexit MM06E005 and seems like this userexit can't cater this issue. Appreciate on your help. Thanks.
    Edited by: Mohd Fazli Zaini on Jun 16, 2010 4:43 AM

    HI,
    U have said the PO is held,when the PO is held it will give a message stating,for  what  reason the PO is being held.Pl post that
    message.In the PR find what is the status in item detail.
    murugan
    Edited by: Murugan mgl on Jul 23, 2009 12:11 PM

  • Can we change the Currency in the PO after GR and  invoice posting

    Hi
    Can we change the currency in the PO , Once after posting of the GR and Invoice.
    If posssible please suggest me the steps.
    Best Regards,
    Sairam

    Hi  Sai,
                   I suggest  not  to change the PO Currency once the GR and Invoice  is Posted , As the  Reports which fetch the PO value will go wrong if we do that.
    PS.  In ME22n System disables  the Currency feild once GR and Invoice Is posted.
    Thanks
    Sudhakar

  • Manual change / copy currency in intercompany billing document

    Hi,
    We are running the SD intercompany process, where 'F1' is the customer invoice billing document type and 'IV' is the intercompany billing document type.
    The currency in billing document type 'F1' is derived from the final customer master data, whereas the currency in billing document 'IV' is taken from the intercompany customer master data. We would like the currency in billing document 'IV' (intercompany) to be the same as the one in 'F1'. It is the Finance team business requirement.
    Is it possible to have the currency copied from 'F1' to 'IV'. We would also be happy to manually change the currency in 'IV'.
    Please advise which settings are required - if this is even possible.
    Thank you,
    Karol
    Edited by: Karol on Jun 17, 2010 12:07 PM

    Hello Karol
    Why do you want to get into copy controls etc,, when you can simply set up the Intercompany customer's currency based  on the  customer's (Sales Org) country.
    Let me explain. US Company is selling to US customer from a Plant in Switzerland.  Real customer is set up with USD in US sales area. The Inter Co Customer created in Swiss Sales Area should be set up with USD as currency based on the country of the Inter Co customer. This is how it is set up in my current client's setup and is working. The only issue you may get is when US is supplying to an International customer based in UK, then you will run into issues, I am assuming you don't have any such cases.
    If the customer master set up  idea does not work for you, then I guess your only option are user exits during Billing document creation or copy control routines.
    Proposals:
    1)  USEREXIT_FILL_VBRK_VBRP (Module pool SAPLV60A, program RV60AFZC). Yo can try filling up VBRK-WAERK with VBAK-WAERK.
    2)  Alternately you may insert the same logic in Include LV60AA95 for program SAPLV60A. This is supposed to be part of the copy control routines but I don't know how it is called etc. It does not appear to be filled in the copy control config. I got the inspiration for this from OSS note 358893 which was meant for Euro conversion, Same concept so why not use it?
    3)Thirdly in the area of copy control (Delivery- Billing Document)  itself, for the item category, set up a custom routine in the feild Data VBRK/VBRP and  insert code there to replace the Document currency with that  from the sales order. You may also want to set up the PricingExchRate type field also with a suitable value right here itself. Only doubt is whether this works for only item or for header also as the field name (VBRK/VBRP) indicates.
    Review  the following OSS note 358893 - Create billing document with different document currency for more on proposal 2.
    Keep us posted on how you are proceeding with the solution.
    Please keep us posted with how you are proceeding on the solution.

  • How to change the currency in Billing plan in SO line item

    Hi Experts
    Pls help in following scenario.
    Company Code Currency: HKD
    Sales Document Currency: INR(Indian Rupees)
    Item Pricing Condition Currency(PR00): 100 USD
    Item Netvalue: 4800INR(System caluculated as per exchange rate type M)
    Document Netvalue: INR 4800
    The sales document item is linked to a billing plan.
    I wanted to maintain 100USD in the billing plan.
    When i goto Sales->item-->Billing Plan, The currency in billing plan screen is document currency and is greyed out.
    How to change the Currency in Billing plan (to Item Condition currency) and maintain the Billing value in USD?
    Pls help.
    Regds
    Hari

    Currency change we wanted to do is not during Invoicing.
    In billing plan itself we want to change the currency setup the billing value in item condition currency.
    Any one, pls help.

  • Change in Currency code in Shopping cart changes the given price

    hi all,
    When i change the currency code the price given gets varied automatically in the shopping cart,Could anyone please advice me why and whats the reason behind chnages?
    i appreciate your value participation.
    Thanks,
    SNMPkumar

    Hi
    If you change the currency code in the shopping cart it will happen automatically.  because we are maintain the currency conversion in the system because of this will happen. 
    regards
    satish

  • How can you add/change the currency rate in spro?

    Hi all,
    you can add a new currency code by going to spro --- general settings --- check currency codes
    for example: PERU ---> PEN
    But, how can we add/change the currency rate PEN in spro?
    for example: Peruvian Nuevo Sol     = 4,3567619
    Is it still in customizing? And if so, where can i find it?
    Many thanks in advance.
    Kind regards,
    Pamela.

    Hi Aman,
    I have entered the field to add the new currency rate.
    But the system doesn't want to valid my new rate.
    I get the following error message:
    "Input should be in the form ._,____ "
    Do you know how to override that command?
    Thanks.
    Regards,
    Pamela

  • Change in Currency in SAP

    Hi
    Mine is Indian Company. At present INR is the currency for the company code 1000.
    However as per IFRS, my company's functional currency is getting changed to USD from INR
    So please let me know if its possible to change the currency of the company code 1000 from 1st April 2011 (date from which IFRS is getting implemented)
    Please let me know what are the steps and issues i need to check for changing the currency of on-going company code.

    Hi,
    Simply Company Code Currency change not possible,
    1 u2013 If you are in ECC implement parlel accounting concept (Leading & Non Leading Ledgers)
    2 u2013 In this case leading ledger for Indian GAAP & Non Leading for US / IFRS purpose, same time you will satisfy more than one GAAP.
    Regards,
    Viswa

Maybe you are looking for