Change of personnel subarea results in change of legal person
Hi Experts.
I have search in this forum after answer on this question, but haven't find any.
To start with, we have implemented CE.
My problem is that if we have hired a person on wrong date and want to change the date to an earlier date, infotype 0000 is OK, but infotype 0001 will not be changed.
The error message says: Change of personnel subarea results in change of legal person.
I have checked the table V_001P_G and it seems to be right. I can't find any fault.
I have tried all other suggestions I have found in this forum such as, Change and Execute info group when running Change entry/leaving date in PA30. Executing the programs RPUFIXDS and RPUP0001 with negative result.
So if there is anyone who can explain to me what this error message actually means, and of course have a solution, I would be really happy.
Thanks // Peter B
Hi Peter,
Apply the following note,
1487263 - transaction PA41 error message is displayed in IT00
after implementing, Kindly use transaction PA41.
The 'Correct action' function (PA41) offers a special functionality for
hiring and termination events only: When changing the begin date of
the event the begin date of all infotype records belonging to the
infogroup assigned will be shifted accordingly.
Hope this will solve your issue.
Regards,
Meera
Similar Messages
-
Deskjet 5150 - Change of Microsoft Office results in change of print appearance
Until recently I used Excel '97 and Windows XP on my desktop PC. I now have a new laptop with Excel 2007 and Windows 7. If I work on my spreadsheet using the laptop, and save it as an Excel '97 file, when I take a copy to my desktop PC for printing - the spreadsheet looks smaller. The margins appear bigger despite the settings being exactly the same. I am being forced to cut and paste from the laptop copy into the desktop PC copy. If I could set up a network life would be easier - but I can't - so I am forced to carry a removable drive between each PC. Any ideas ?
MS Office only comes in one language at a time. You have to download another version in English. You should be able to use the same authorization code.
For MS products it is really best to go to the forums they run.
http://answers.microsoft.com/en-us/mac/forum/macword -
Personnel subarea changed in hr module but not reflecting to bi with same
Dear all
below is the scenario at present
personnel subarea for employee in april was as 1111.
personnel subarea for that employee in MAY IS 1120
that is one employee changed from personnel subarea 1111 to 1120 in HR - MODULE R/3
In BI still he showing in personnel subarea 1111 only
How to get changed this employyye form personnel subarea 1111 to 1120 where as PERSONNEL AREA IS SAME
Provide your valueble suggestions.
Thanks
satish.AHi Thankd for ur qick reply
Already i have loaded the data of o employee but it is not working.Just now also done the same there is no use
personnel subarea is not getting changed as of r/3 for the employee.
Any more ideas regarding the issue it will be helpful
Thanks
Satish.A -
Personnel subarea change ?
Hi all,
Need to figure out whether we can change or edit a PERSONNEL SUBAREA. My client is planning to move from 4.6c HR to 4.7 HR. during this change they need to change some of the personnel subarea (i think just rename).So they need to do the necessary changes in 4.6c before they migrate to 4.7. Is there any report that can do the work?
If this is not possible, Is there an option similar to reference personnel number IT 31? so that i can assign the old personnel subarea as reference to the new one.
Thank you people
NiranjanHi Niranjan
U can rename the Personnel Subarea name by
SPRO->ENTERPRISE STRUCTURE->DEFINITION->HUMAN RESOURCE->PERSONNEL SUBAREAS.
Then Double click on "Copy, delete, check personnel subarea".
Then Click on "Replace Org Object"(3rd button).
Then Gibve the Old and new name.
This will change the name in every table.
But after doing this U have to change the employee data separately.
Award points if helpful.
~BiSu -
Impact if we change personnel subareas
We have two personnel subareas say X and Y. Now we want to consolodate the two into one personnel subarea.
Can anyone suggest what the negative impact will be by doing this.
Thanks in advanceHmmm
Generally the Purpose of the Personal Subareas are to differentiate Employees on the basis of various parameters
and u Need to Change the Employee PSA Who already in X
So, Even though u Consolidate the X PSA with Y uder one PA
Mainly Check the Groupings u must assign the same Groupings that exists to Y
Check V_0001P_ALL
PSA defines the permissibilty of Wage type , Holiday Calendar ETC -
Change text of 'Overall Result' to Custom text in BEx
All,
Is it possible to change the text 'Overall Result' to custom text (say, Total) in the BEx analyzer.
Pls let me know if you need more detail on this.
Regards,
AnandHi,
Check Link:
Cannot find SAPBEx module
Note:
If you are using BEx Analyzer (i.e., queries are implemented in Excel workbooks), then you can change this using Visual Basic code written in the SAPBEX module.
Anything put in this module will be executed just after query is refreshed and just before the user sees the results.
Here is code you might use:
Sub SAPBEXonRefresh(queryID As String, resultArea As Range)
On Error GoTo EndMacro
Application.ScreenUpdating = False
Application.GoTo reference:="SAPBEXqueries!" & queryID
Selection.Replace What:="Overall Result", Replacement:="Whatever You Want" _
, LookAt:=xlPart, SearchOrder:=xlByRows, MatchCase:=False
EndMacro:
Application.ScreenUpdating = True
End Sub
Hope it Helps.
Thanks and Regards,
MuraliManohar. -
Column order is changed in criteria tab ,result tab column order unchanged
I created a report in sample database with these columns in 11.1.1.6
1- C50 Region 2 D1 Office, 3 P1 Product 4 1-Revenue and 5 C1 Customer Name
Hit Results and I can see the result in this order.
If I change column order in result tab to say 1,5,2,3,4, result tab table view is updated. Now if I go back to criteria tab, column order remains the same ( 1,2,3,4,5)
This may be expected functionality in 11.1.1.6 but was not the case in 10g. This may be due to changes allowed in html layer.
Now if I go back to criteria tab and reorder columns (say 1,3,2,4,5) and then click result, result tab columns are not ordered as set here. Result tab continues to show 1,2,3,4,5
I saved the report with order 1,3,2,4,5 and log back in, order remains 1,2,3,45/ I believe if I restart presentation services, it will be come OK. The only way is to create a new report that I know now other than restarting presentation service.
Question
Have you observed this?
If yes, what is the solution, how can result tab refresh with the order of the columns in criteria tab?
BhupendraHi,
In OBI 11g,the column order in the criteria tab and the results tab are not coupled to each other.
When you create the report for the first time, both are in sync. If you need to reorder the columns, goto result tab and click on edit report, in the columns and measures section of the report, reorder the columns the way you desire.
Save the report and the report should have the columns in the order you have set.
P.S : this is not a bug !
Thanks,
Vineeth -
Overal Result is changing when drill down the char - report is having cond.
Hi ,
we are running one report, the overal result is changing by drill down one char. if we remove drill down the same char. then it is displying the original value.
Note: we have one condition on the report. in the _Characterstiv Assignment tab_ the radio box Individual chars and Chars. combinations is selected.
can any one please sugest us, how to get the same result even though we dril down the other chars.
Thanks in Advance,
RajuHi Gangaraju,
If i am correct, the key figure column for which the total is changing is having the property set as "Calculate result as :Total" at query designer level.
If you want to display the same total irrespective of the drilldown of the characteristics then remove this property from the keyfigure in Query Designer .
Then you will see the original total irrespective of the characteristic being taken for drilldown.
I hope the above reply was helpful.
Kind Regards,
Ashutosh Singh -
Change the description of Result to Total
Hi all,
I am using BW 3.5 version. In the report can i change the description of the over all result "RESULT" to TOTAL.
Thanks,
Raniu cannot change the description of result to total
uv can contact abaper to get his/her view on this and see if u can change the description to total etc.
secondly u intent to reflect this change in query execution in Analyzer or on Web -
HT4623 Why Did this update result in changes to the apple id on my phone?
Why did the recent update cause so many problems on my new iphone?
The update would not result in changes to your Apple ID.
As for your other question it is impossible to answer since you haven't mentioned any specific problems.
I (and millions of others) updated to iOS 6.1.3 with no problems whatsoever.
What problems do you have? It is possible that some corruption occurred when you were updating your iPhone. -
Any chance to change the personnel No. of an employeeu2026
Dear all,
I have created one employee with a personnel no. 1178 instead of 1179,
Is there any chance to change the personnel no.???
Regards,
MilarepaHi,
You can use the transaction PU00 for deleting a personnel number. But before proceeding the same please make sure this employee have not accounted for Payroll and Time evaluation.
Regards
Raviiiiiiiiiiiiiiiiii -
Incorrect combinations for personnel area and personnel subare
Hi all,
we are getting incorrect combinations for personnel area and personnel subarea in the Target and as well in report.
we are using standard datasources 0PERS_AREA_TEXT and 0PERS_SAREA_TEXT, we are extracting only masterdata text from ECC, Not maintaining Attibute and Hierarchy for personnel area and personnel subarea.
we created (Actions overview) report on top of standard DSO 0PA_DS12 extracted from data source 0HR_PA_1,
Actually some of employees are changed on xxxx.xx.xx date from one personnel area to another personnel area with respective subarea's, but here employee personnel area are coming correctly but not for subarea.
what i need to do now?
can any one help out in this..
Thanks in advance.
Thanks,
SriHi,
In this context we will have two senarios.
1. Displaying the Personal Area and Personal Sub Area from Transactional data.
2. Displaying from Master Data.
If you choose Scenario 1 then, Personal Area and Personal Sub Area will be shown as per ECC entry. But in second scenario, If one Personal area or Personal Sub Area changed over a period of time that will effect the historical data also.
For Example if your Personal Sub Area changed on Apr 1, 2011.
Scenario 1: Report will be as per ECC Data ( from Apr 1, 2011 onwards it will show new Personal Sub Area).
Scenario 2: Report will show new Personal Sub Area of Personal Area for entire data.
Hope this will help you.
Regards,
Chenna. -
Personnel subarea inheritance issue
Hi,
not sure if this is an abap or functional question, so I started here.
I have a report using Logical Database PNPCE to find some values from a couple of info types. When I select a unit (from the 'OrgStructure' button at the top of the screen), say 111, and all its sub-units with no selections in the selection screen, I get one person displayed. This is correct and this person is in a sub-unit 3 levels down (unit 333).
I then added a selection to only display people in units with Personnel SubArea 'OTEC'. Now I get no results output. When I look in PPOME, I can see that unit 333 has Personnel SubArea 'OTEC' but it is inherited from '111'.
In PP01, unit 111 has an Account Assignment entry (Info Type 1008) but 333 does not.
Does anyone know how to report on this?
Is there a flag somewhere that tells the LDB to check for inherited units?
If not, any ideas if there is a function out there to find the superior unit for these sub-units?
Thanks.Hi,
I couldn't find a simple solution so have used the FM RH_CHECK_ACC_INPUT to get the parent org unit details.
Thanks. -
Change detector failed while scanning for changes to type User
I'm receiving lots of system log warnings in IdM.
These warnings are not bound to any particular action in IdM, they just do appear while IdM is on.
Almost one warning per one second.
Change detector failed while scanning for changes to type Server
Change detector failed while scanning for changes to type UserForm
Change detector failed while scanning for changes to type User
Change detector failed while scanning for changes to type Resource
SysLog detail:
Timestamp 123
Event
Server server11
Severity Warning
Component Repository
Error Code OCDT00
Message Change detector failed while scanning for changes to type User
Reported cause java.lang.NullPointerException
java.lang.NullPointerException
at com.waveset.repository.ObjectChange.equals(ObjectChange.java:112)
at java.util.HashMap.eq(HashMap.java:299)
at java.util.HashMap.containsKey(HashMap.java:381)
at java.util.HashSet.contains(HashSet.java:182)
at com.waveset.repository.ObjectChangeManager$RemoteChangeDetector.dispatchChanges(ObjectChangeManager.java:398)
at com.waveset.repository.ObjectChangeManager$RemoteChangeDetector.run(ObjectChangeManager.java:314)
at java.util.TimerThread.mainLoop(Timer.java:512)
at java.util.TimerThread.run(Timer.java:462)same here, just deployed 8.1 with oracle as db. It results in syslog table growing into 10+G and still growing.
wonder if there are others who are seeing this.
my "syslog -d 1" output looks like this...
2009-12-02 04:52:55.972 null W xxx RP OCDT00 Change
detector failed while scanning for changes to type Account
2009-12-02 04:53:06.400 null W xxx RP OCDT00 Change
detector failed while scanning for changes to type Server
2009-12-02 04:53:06.578 null W xxx RP OCDT00 Change
detector failed while scanning for changes to type User
2009-12-02 04:53:06.914 null W xxx RP OCDT00 Change
detector failed while scanning for changes to type Account
2009-12-02 04:53:17.479 null W xxx RP OCDT00 Change
detector failed while scanning for changes to type Server
C:\Program Files\Apache Software Foundation\Apache Tomcat 6.0.18\webapps\ims\bin
lh syslog -d 1 -
When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the text and change the font, it does not change it properly? This is making it impossible to amend.
Hi Janedance1,
If the PDF that you converted already has searchable text, please try disabling OCR as described in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel. (If the PDF was created from a scanned document and doesn't already have searchable text, disabling OCR isn't a great option, as the text won't be searchable/editable in the converted Word doc.)
Please let us know how it goes.
Best,
Sara
Maybe you are looking for
-
Would I still be able to fun Final Cut Pro with no problem with the new 13"
My old MBP has "NVIDIA GeForce 860M GT with 128MB" and the new 13-inch MBP has "NVIDIA GeForce 9400M graphics" I don't really know what "GT" means, but the more expensive MBP's listed have it, so I'm guessing it's pretty good. I was wondering if I'd
-
Help me know the specs of this ipad serial number dl*****18y thamks
Pls help me to know specs of this serial number dl****18y thanks <Edited by Host>
-
Error while issuing subcon material (WM and HUM managed)
Hi All, We have activated Warehouse Mgmt and Handling Unit Mgmt for one storage location. For Subcontracting process, while issuing material from this storage location to subcontractor through mvt. type 541, we are getting Error message VL 295 " Dlv.
-
How to make a field under Selection column in DataSource from dimmed to ...
We try to make an InfoObject shows up in Data Selection of an InfoPackage to restrict the data load based on the range of this InfoObject. In order to do this, we will have to go to the source system to run RSA6 to edit the datasource to make this f
-
Using variable 0P_FPER to calculate YTD Fiscal period
Could someone please explain the procedure for creating a variable which will use the value entered from the variable 0P_FPER - Period/Fiscal Year (Single Value Entry, Required) to calculate the YTD Fiscal Period. Regards, Craig Stephen