Change of the quantity field to 5 decimal places in SAP

Hi Gurus,
The quantity field is appearing with 3 decimal places in BOM, Process Order, etc. Is it possible to make the decimal places to 5.
All the decimal digits from SAP are 3 digits. We have an interface through which the data flows from another legacy system (Fow system) to SAP. And the Fow system setting was 5 digits. The issue is some of the raw material requirement qty was really minor and it might be below the decimal 3 digits.
In that case, when the data flows to SAP from Fow system it will cause the material stage failure. so please help me to investigate how to let the SAP also could have the 5 digits decimal. Thanks.
Regards
Brijesh

Dear ,
Its SAP standard ,to put and use decimal places in BOM qty .You can use upto 3 decimal places in BOM qty.
At SE11 you need to see what measure field is linked to the quantity field.Then goto tranaction CUNI and chage the decimal places of the unit of measure for the qty field unit , it will not allow you more than 3 decimal places in case of BOM qty.
You have following choice :
1. With the access key make changes in the standard program and take help from ABAPer
SAPLCSDI, Table Name-RC29P, Field Name- MENGE.
2) Change the base quantity in BOM header to 1000 aand accordingly change the component quantity.
Hope this is clear
Regards
JH

Similar Messages

Rounding a quantity field to one decimal place. PLEASE URGENT

I have a quantity field with three decimal places. I have to print this field with only one decimal place. This is in a smartform.
suppose: qty = 45.678
I want it to be printed as 45.7
Thanks in advance.

Hi Riki,
I think you can use Function Module ROUND to round off the value...
REPORT ZTEST_SHAIL4 .
data: out type p decimals 1,
inp type f.
inp = '45.678'.
CALL FUNCTION 'ROUND'
EXPORTING
DECIMALS =
input = inp
SIGN = ' '
IMPORTING
OUTPUT = out
EXCEPTIONS
INPUT_INVALID = 1
OVERFLOW = 2
TYPE_INVALID = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Now use the variable 'out' to display the rounded off value...
Regards,
SP.

Quantity field to one decimal place. PLEASE URGENT

I have a quantity field with three decimal places. I have to print this field with only one decimal place. This is in a smartform.
suppose: qty = 45.678
I want it to be printed as 45.7
Thanks in advance.

Create one more variable in Global definitions with only 1 decimal place.
Assign value of qty to this new variable.
SAP automatically takes care of the rounding.
And then print this new variable rather than qty.
You can write all these in a code block.

Query Alert for a change in value of the Quantity field of the sales order

Hi Experts,
A query alert has been set up to alert the warehouse employee when a new sales order is created by a sales employee. Our client wants the warehouse employee alerted when the sales employee edits the quantity field of an already added sales order.
Kindly assist in designing a query to notify of this change in the Quantity field of the sales order.
David

Try this one:
SELECT T0.DocNum, T0.CardCode, T1.ItemCode, T3.Quantity 'Old Qty', T0.Quantity 'New Qty', MAX(T2.LogInstanc) 'Times Changed'
FROM dbo.ORDR T0
INNER JOIN dbo.RDR1 T1 ON T1.DocEntry = T0.DocEntry
INNER JOIN dbo.ADOC T2 ON T2.DocNum = T0.DocNum AND T2.ObjType = '17'
INNER JOIN dbo.ADO1 T3 ON T3.DocEntry = T2.DocEntry AND T3.ItemCode = T1.ItemCode
WHERE T0.DocStatus = 'O' and T0.DocType = 'I' AND T1.Quantity != T3.Quantity
GROUP BY T0.DocNum, T0.CardCode, T1.ItemCode, T1.Quantity, T3.quantity

Problem with the quantity field

hi every one
i am facing a problem with the quantity field (vbap-kwmeng)
as per my requirement i need to display this quantity field along with some other item fields from VBAP in an alv grid.
among all the fields displayed in the alv grid only this quantity field is editable(end user can change this quantity)
once end user changes this quantity and press save button i need to capture this new quantity in my internaltable.
problem is input of length of quantity is 15 and the output length is 19
so when i am pressing save
say my quantity is 50 when i am pressing save '0.050' is coming because of the length difference
how can i capture the original changed value.
vamsi

what about define two fields in you inner table ,one as char and the other as vbap-kwmeng, you can show the char one in the ALV gird , when user input value and press SAVE ,you can move the value to vbap-kwmeng.
you can test it,mybe some one has one better idea.

Hide the quantity field at goods movements in cofirmation.

HI,
My client is using CO11N for confirmation. and doing auto goods reciept and auto goods issue.
Whn I am clicking on Goods movement in CO11N system is showing me which material is going in goods reciept and which is in Goods issue.
Now my requirement is I want to hide the quantity field of the material in goods movement because some time user is changing the quantity of goods issue.
Wat can I do for the same?
Please sugest
Thanks & Regards,
Nilesh Ithape.

Dear Nilesh,
Try to achieve the same using the authorization control.
You can take the help of the BASIS consultant and try to find the authorization object and the value
which's allowing to change the quantity.
Check whether this is the particular object C_AFKO_AWA is allowing the same(I'm not sure).
After finding out the Authorization object remove the tick mark for the value which's for change or delete.
You can find it using SU24 T code or using SUIM and other related T codes.
If it cant be done even after authorization control ,revert back to the forum.
Regards
Mangalraj.S

In smartforms the quantity field is not showing the perfect value .

In smartforms the quantity field is not showing the perfect value because the point is shifting left
insted of showing 8.10 it is showing 80.00.

Hi,
Dont use the quantity field same as that it come from interface Fm declare one field for quantity in the global settings and write the logic to pass the value to that field and pass that global value to the particular texts...same is the case with currency fields also.
Regards,
Rohan.

AP Invoice interfaced to Projects shows the amount in the quantity field

We are noticing that AP Invoices interfaced to Projects show the invoice amount in the quantity field, e.g. in projects quantity and cost both show the invoice amount. The actual quantity is different. Anybody experienced that or has a solution?

Hi User,
This is intended functionality of Oracle projects:
For AP invoices the QUANTITY = ACTUAL AMOUNT (eg 1000) of the AP invoice at the distribution level and UOM = word "CURRENCY".
Incase of labor expenditures the quantity = the number of hours and UOM = HOURS.
Please revert incase more information is required on this issue.
Thanks & Regards,
Neeta

Unit of the Quantity field is displaying in internal format in Bex report

Hi Experts,
I have a BEx Query, in which i have quantity keyfigure added(Examble - Sales Quantity).
When i run the report for a selection the report displayes the unit for the quantity field in internal format.
Examble - instead of showing 10 CS (case), the report is shwing in 10 CV (internal format of unit CS is CV).
Also when i check the cube content, it has the unit updated into the cube as CS for that keyfigure.
Can any one let us know, how to dispaly the report output in external format.
Regards.
Muruganand.K

Hi Gopi,
The property in question is "calculated". This is a property of a context value attribute. So select the value attribute in the context to which your field is bound and view the properties. Set "calculated=true". It will generate the accessors.
In the setter method, add the following piece of code:
public void set<your attribute name>(IPrivate<your component>View.IContextElement element, java.lang.String value)
DecimalFormat df = new DecimalFormat("#.00");
value = df.format(value).toString();
Regards,
Satyajit
Message was edited by: Satyajit Chakraborty
Message was edited by: Satyajit Chakraborty

Changes in the Text Field thru FB02

Hi,
I have created an accounting document thru FB01. However, there were some changes in the text field that needs to be done so I have edited the line items thru FB02. After saving the changes I viewed the data in tcode KE5Z but it seems that the changes in text were not captured in SAP Standard report. But when you double click the line item it will show the edited text.
For Example.
Document 1000001 original text is: 'Rental Charges for the month of April' ( originally created in FB01 )
Edited text thru FB02 : 'Rental Charges for the month of May'
In FB03, it will show the edited text which is 'Rental Charges for the month of May'
But in other reports such as KE5Z, it still shows the original text.
Kindly help.
Thanks.

Hi Sanil,
Thanks for the quick reply.
Is there a way where changes in an FI Document will also update the CO line items or the profit center actual line items?
When we originally create an FI document in FB01, the text field in CO line item is also updated as to whatever text we have inputted in the document ( details were stored in BSEG ). But if changes were made, the actual line items were not updated...
Regards.

Problem while changing decimal places in SAP B1 2007

Hi Experts,
I want change the decimal places of Quantity type fields from 2 decimal places to 4 decimal places. But while changing it in Genral settings form ,it shows the error message "Cannot update while another user is connected to the company". it is working in SAP B1 2005B but not in SAP B1 2007
Please help me if you have any solution on this issue..
Thanking you in advance

Paul,
Please see SAP Note 1247060 as is discusses the fact that this did work in 2005, but the behavior was changed in version 2007 ...
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&;note_numm=0001247060
Eddy

Save data with more than 6 decimal places in SAP MDM 5.5

Hi there,
I need some help concerning saving data with about 20 decimal places (e.g. 0,00452961328622164) in MDM. I declared the datatyp "REAL", there are only 6 decimal places possible.
How can I save this Data? Maybe exponential function?
Please help.
Thank you
Thomas Pfab

currency takes you to 14 decimal places, if you want to have it as a little work around....you can always take out that symbol if it is annoying.(ohhh and decimal is multilingual too in currency, probably not a good hack!)
or without even knwoing what your requirement is? try normalizing the value, How many more decimal places can you hit?
One 100 1. "ten to the zero"
tenth 10-1 0.1 "ten to the minus one"
hundredth 10-2 0.01. "ten to the minus two"
thousandth 10-3 0.001. "ten to the minus three"
ten thousand 10-4 0.0001. "ten to the minus four"
hundred thousandth 10-5 0.00001. "ten to the minus five"
millionth 10-6 0.000001 "ten to the minus six"
ten millionth 10-7 0.0000001. "ten to the minus seven"
hundred millionth 10-8 0.00000001. "ten to the minus eight"
billionth 10-9 0.000000001. "ten to the minus nine"
ten billionth 10-10 0.0000000001. "ten to the minus ten"
hundred billionth 10-11 0.00000000001. "ten to the minus eleven"
trillionth 10-12 0.000000000001 "ten to the minus twelve"
ten trillionth 10-13 0.0000000000001. "ten to the minus thirteen"
hundred trillionth 10-14 0.00000000000001. "ten to the minus fourteen"
and put that field label indicating the 10th power. Like "Accuracy in 10 POW -9"
Just a wild guess.well thats how we usually show data in catalogues too!
(or)
separate the integer and decimal portions into two fields and store it in the repository.(split on ',')
-Sudhir.

Restrict the quantity fields from changing in ME54N during PR release

Hi All,
I have created a workflow for purchase requisition release strategy . Apporver's will login into ME54N transcation from the attachment in email and provide Release/Reject on PR . At that when any approver login to ME54N the item detials are in change mode so that user can able change quantity or other fields in the ME54N Transaction . So how to restrict the Approvers for not changing any quantity fields on the PR when it is being released .
Thanks and regards,
Dilip Kumar

Hi-
I do agree with all other comments.
Also discuss with you functional consultant, say if any of the field which determines release strategy is changed by the approver, then end the current workflow instance and start the new workflow instance based on new release strategy (obviously new set of approevrs)
This is possible as SAP will trigger the corresponding event, if any of the field which determines release strategy is changed, (if release stratgey is configured properly).
You need to build the workflow in such a way, that if this event occurs, then end the current workflow instance and start the new workflow instance.
Vinoth

Displaying the quantity field in decimal values

hi
I have created a web dynpro application,and I am calling BAPI functional module from that webdynpro application.
Now the output is being displayed in the second view by giving the input from the first view.
Now my problem is that the quantity value is being displayed as "5" and whereas It should be "5.00".
Is there any setting to be done from the properties end of that particular table.
Please suggest me in this issue.
thanks and regards
kris

Hi Gopi,
The property in question is "calculated". This is a property of a context value attribute. So select the value attribute in the context to which your field is bound and view the properties. Set "calculated=true". It will generate the accessors.
In the setter method, add the following piece of code:
public void set<your attribute name>(IPrivate<your component>View.IContextElement element, java.lang.String value)
DecimalFormat df = new DecimalFormat("#.00");
value = df.format(value).toString();
Regards,
Satyajit
Message was edited by: Satyajit Chakraborty
Message was edited by: Satyajit Chakraborty

Problem with the quantity field in bdc?

Hi,
i have to populate a quantity field in bdc .
for ex 123.00. but the bdc accepting only in the form of 123,00.
How can I do this .
I tried by changing the user profile, but went in vain.
Suggest me how to convert ?
Thanks.

Hi,
Create a variable of TYPE CHAR.Write your quantity field value into this variable and pass this variable to the BDC. This is the way of passing quantity fields to BDC.
DATA: V_AMOUNT(22) TYPE C.
WRITE ITAB-DMBTR INTO V_AMOUNT.
Pass this V_AMOUNT to BDC flow.
Hope this helps.
ashish

Change of the quantity field to 5 decimal places in SAP

Similar Messages

Maybe you are looking for