Change Partners at item level for a LUMF

Hi
does anyone know how i can change the item partner address on a material that has an item cat grp of LUMF, i can chage the sub items but not this one?
Regards
Steve

Hi Steve,
The item category (for example TANN) must be marked as "business data" in customizing, to allow different partners at item level (and also different VBKD business data at item level).
Therefore please check the customizing of the item category determined by the LUMF item category group.
Best Regards,
Franck Lumpe
Freelance SAP Logistics Consultant

Similar Messages

Report on delivery data in item level for list of po

Dear all
How to take Report on delivery data in item level for list of po
regards
M.Chandra mohan

You can check any of the standard reports like ME2M with the selection variant as "PO where GR exists"

User exit at item level for billing block field default for VA41 or VA42

Hi All,
I want user exit at item level for contract (VA41or VA42) for the field Billing Block in the Billing document tab
which has to populate with some default value.
Which user exit i need to check.
Regards
Jai

Hi,
Use subroutine USEREXIT_FIELD_MODIFICATION in Include MV45AFZZ.
Make sure this is for only tcodes VA41 and VA42 because this wil trigger for sales order also.
Regards,
Ashok.

Change in Work item Text for Approval Workflow WS14000133

Hi,
I need to change the work item text for Shopping Cart Approval Workflow WS14000133.
I have created an Attribute in Business Object BUS2121 and called the same attribute in work item text.
In PFTC -> Redefine Work item text - > and i have defined the work item text as well called the attribute from the container.
what the problem over here is - when I am passing the attribute in the work item text in the task, I am unable to see the work item text with the Dynamic Attribute but I am able to see the work item alone (not with the Dynamic attribut)
But when i debug the workflow from SWI1 then i can see the dynamic attribute in the Container of the workflow but nt in the approver's inbox in portal..
Can you please tell me - that why is this a strange behaviour that i can see the Dynamic attributed created initially in the workflow container of the Business Object but nt in the Approvers inbox either in Backend nor in the front end...
Thanks,

Hi,
Maybe this SAP note/KBA will help :
1470761 - How to change the text of the SRM approval links in inbox or UWL
Kind regards,
Siobhan

Partner Function Address change at line item level - Item Partners checkbox

Hi guru, we have a requirement that we need to change the address for partner function at line item level without changing the partner number. Currently the ship-to partner function address is automatically coming from the header although the number is modifiable but not the address (when double click into the partner number, the pop-up is grayed out). It is probably because the Item partner check box for the shipto partner is not checked (field name: SD_PARTNER_POSFLAG). However that field is not modifiable in VA02 either.
If the shipto partner number is overwritten, then the item partner check-box is automatically checked and allows address chanage. Is there a way in the configuration that can default the 'item partners' checkbox for certain partner so the address can be changed without the need to overwrite the account?
Any advice is appreciated.
Thank you.

If the item level ship-to party is derived from header partner function, but you want to change the address at item screen rather than header level. On item screen, enter the same function, the same number again in a new line, "item partner SD_PARTNER_POSFLAG" is then ticked. Then proceed to the address change.
No need to do modification.

Prevent invoice split with different partners on item level

Dear Experts,
in a sales order we have different representatives (partner function "VE") on item level due to commission issues. Now we have the requirement to prevent the invoice split with different representatves on item in order-related billing. While in copy control it is easy to prevent invoice split due to different VBRK-fields we have not found a userexit ( or copy-control) to prevent invoice split with different partners.
Anybody has an idea to this issue?
Thanks for your help.
Mark

Dear Mark,
You are on the right-track.
As, there is no standard routine, you have to write your requirement in existing routine (i.e. modify standard routine with your requirement)
To do so, go to:
T. Code: VOFM --> Copying requirement(Menu-bar) --> Billing Document (Take help from ABAPer).
Write code as an implicit enhancement:
clear: KURGV-KUNNR
- {Please confirm the Table-Field name}
And if there is any further changes, ABAper will help you out.
Once modified, attach your routine in to Field: VBRK/ VBRP.
Best Regards,
Amit
Note: I think, following thread will help you and clear the requirement:
Re: Avoid invoice split (Please go-through it)

Fields in sales order item level for pricing

01.02.2011
Hi friends,
I have a requirement wherein i need at least 3 additional fields at the item level in the Sales Order for pricing determination i.e i want this field to be used in the condition table. Since these fields should have list of values also, I find the fields Material group1, material group2 and material group3 ideal ones. I wont be using this field in the material master but inputting some data in these fields through development at the sales order level. How can i get these fields in the catalog? Please suggest.
Regards,
Uday

The following communication structures are relevant in pricing:
KOMK (pricing communication header)
KOMP (pricing communication item)
KOMG (allowed fields for condition structures)
For technical reasons, communication structure KOMG is used. It combines the fields from KOMK and KOMP that are relevant for pricing in the standard system and are offered in the field catalog of condition tables. If you want to use a new field in the field catalog, you must add the field to KOMP or KOMK in the following INCLUDES:
header data in INCLUDE KOMKAZ in KOMK
item data in INCLUDE KOMPAZ in KOMP
When you use INCLUDES, the field is automatically added to KOMG and the field catalog.
The routines for assigning values to the new fields in order processing are found in member MV45AFZZ. Use the following user exits:
USEREXIT_PRICING_PREPARE_TKOMK (header fields)
USEREXIT_PRICING_PREPARE_TKOMP (item fields)
The routines for assigning values to the new fields in billing are found in member RV60AFZZ. Use the following user exits:
USEREXIT_PRICING_PREPARE_TKOMK (header fields)
USEREXIT_PRICING_PREPARE_TKOMP (item fields)
Examples for using new fields in pricing
Example 1
In the first example, parts of a document field are to be used in pricing. You want to use the first three digits of the product hierarchy (PRODH) for pricing, for example. Proceed as follows:
1. Check the data elements in the standard system.
2. Since there is no such data element you have to create the new data element ZZPRODH1. Also create a domain with the length "3" and the data type "CHAR" for the new data element.
Remember that new data fields must start with the letters "ZZ" or "YY", since SAP reserved these letters to protect them from being overwritten during a release upgrade.
3. Check whether the product hierarchy (PRODH) is found at header or at item level.
In table VBAP, document field PRODH is defined as an item field.
4. Integrate the field name ZZPRODH in the communication structure KOMP using the INCLUDE KOMPAZ and allocate the data element PRODH to it.
5. Activate the structure.
6. Check in which table the field PRODH exists.
The field is in table VBAP (sales document: item data).
7. Assign a value to the new field in the FORM routines for sales order processing and billing using the appropriate user exits:
In sales order processing the user exit is found in member MV45AFZZ. The complete statement is:
FORM USEREXIT_PRICING_PREPARE_TKOMP.
MOVE VBAP-PRODH(3) TO TKOMP-ZZPRODH.
ENDFORM.
The routines for assigning a value to the new fields in billing are found in member RV60AFZZ. The statement is as follows:
FORM USEREXIT_PRICING_PREPARE_TKOMK
MOVE XVBRP-PRODH(3) TO TKOMP-ZZPRODH.
ENDFORM.

PO Delevary address not coming at item level for a New config Plant WO S Lo

Hi Gurus,
I have configured a new plant and address is maintained for this new plant. for a newly configured company code Plant and company codes are properly assigned. Now I am using present P. Org and assigned this to plant too. I am using this plant for basically non stock type of materials and no storage locations are maintained for this plant. Now I have created a New vendor for this P org and tryng to create a PO. But at the time of creation of PO I am getting as Error "Maintain Address". When I checked, I found that at item level, under delivery tab, Address number which was suppose to be for this plant( since no storage location is maintained for this) should come automatically, which is why I am getting an error. Can some one please explain if I missed something?
Thanks in Advance.
Regards
Nilesh

Hai Nilesh,
Please check T CODE: MEAN
Purchase order address required as per location
Delivery Address Number in Purchase order
Regards,
Mani

Po number at Item level for Invoice

Hi,
My Invoice has 2 Line Items. Each coming from different Sales Order as a result of Collective Delivery.
I want to Print Purchase order number at the Item level from respective Sales Orders.
How can I trace it back, which tables would be useful?
Regards
Trupti Deulkar

Thanks for All the Replies.
I used table VBFA which gave me preceding documents, where I got Sales Orders ( Doc CAtegory C)
Further from VBAK retrieved the PO numbers BSTNK
This issue has been resolved.
Regards
Trupti Deulkar

Me21n disable input at item level for a/c assn

HI expoerts,
I want to disable screen input for field account assignment at item level.
anyone know about any exit or badi.
thanks

Hi,
SPRO->Materials Management->Purchasing->Purchase Order->Define Screen Layout at Document Level.
Then chosse me21n and click details.
select Basic Data, Item then click choose (tick) button. there you can set the desired screen layout for me21n

Disable a field at Item level for SC confirmation Screen

Dear All ,
PLEase help me with a step by step instruction on how to disable field at Item level of confirmation screen of SC .
I tried in Webdynpro component : Web Dynpro Component:/SAPSRM/WDC_DODC_CONF_IBD in se80 and below is what I get ;
When I click on Display it asks me for an access key which I dont have ..
When I click on the enhancement option it asked me to create an implemenation which I did as seen in yellow below and still the enabled field is not getting editable so tha I can uncheck and make the field dissapper .
Please can some one really help me in understanding what exactly I am doing wrong ?
Also Please let me know if the SPRO path related in this to be able to do in any which way ... I tried expanding
Configure field control .. and it doesnt expand so dont know which other option to use ..
Thanks for your help in advance .
Kindly let me know !!
Regards
Vinita

HI Laurent .
1. Thanks for your input . I wasnt able to open the SPRO path coz I was using SAP 720 and when I installed 730 I was able to use it .
2. I am still not able to udnerstand how to configure it through Meta data .. What does Final_Entry mean .. I want to disable the field Last del indicator and its flag box and the label as well ..
3. I tried through component configuration and it worked ..as below :
I went to the webdynpro component and started the component configiurator :
Here I made both the field and Label insisible and was able to do this .
Please can some one help ,me know how to configire this through Meta data concept as well .. I wanted to try that method as well for my understanding ..
Would appreciate your help and would be closing this post soon ..

Correspondence at line item level for Residual customer document

HI All,
I want to store corresponence letter for residual documents. The document containts some 20 line items and i want to store different correspondence letters for each & every line item.But system stores at header level and not in line item level.
I am able to do, when i ran F.61 for each & every line items. Whether its possible to type correspondence for all line items at a single shot and possible to run F.61.
Thanks
Hari

Hi Liz,
I´ve got the similar problem like you wrote.
My client had a reorg project behind and locked the old profit centers. For the reason of clearing open items and FX valuation those locked profit centers need either to be re-locked or the posting need to be posted to the new profit centers by using substition. Could you please kindly advicehow did you solved this problem?
OR maybe someone else can help?
Many thanks in advance.

Two different Incompletion log in item level for one sales document type

Hi All,
we are using one sales document type for 5 different sales org, now we are implemented new sales org.
pervious all 5 sales org we have setup incompletion log at item level 5 fileds.now for new sales org we need to setup out 5 fields we need to setup 3 field.
how to maintain same sales document type 2 different incompletion log.
i have checked in forum i found out below link.but is not matching for my requirement.
http://forums.sdn.sap.com/thread.jspa?threadID=1433420
Thanks,
Kumar

Hi ,
Thanks for your responds.
i will check with my ABAP person if any thing is required i will come back to you.
Thanks,
kumar

How to maintain Userstatus in item level for Quotation ?

Hi,
I am working on CRM 7.0 Lean order Quotation..
I have field called ;Status' in item level. But it is system status.
I need to add 'User status' assignment block.
For header level there is field called' userstatus' but for item the standard field is not there.
So I need to create a Z field with DDLB and need to maintain values from VA23 (ECC syatem) are existing for the field Userstatus..
I can do by using AET, the problem is If I select an option from DDLB, corresponding checkbox in userstatus in ECC system need to be checked.
Can u Please provide anyy'LORD' interface or any solution..
Regards,
Raju

Hi,
You can save text using FM 'SAVE_TEXT' provided you know the ID and OBJECT.
For Sales Order Header text usually the OBJECT is 'VBBK' and the NUMBER is '<SO Number>'.
For Sales Order Item text usually the OBJECT is 'VBBP' and the NUMBER is '<SO Number><Item Number>'.
You will have to find out the ID of the Text from its attributes.
Thanks

Substitute at line item level for F-32 (or FB1D) to change profit center

Hi I’m Liz,
I started to write a substitution for F-32 transaction code for clearing with write off reason codes. I trying to substitute if Profit center = 14xxx then substitute profit center 141xx for only P&L GL accounts. If I simulate the substitution step and enter in GL account, Doc Type and profit center it selects the correct profit center. When I try to post an entry with the trace turn on it shows the profit center field blank so no substitution is determined. The reason for the substitution is my company is going through a reorg where certain profit center will be locked to post. The issue is some Account Receivable posting hold the profit centers that are planning to be locked. I have created a validation rule which will allow only certain User ID to post with the locked profit center (to allow clearing open items posting) to balance sheet accounts. My company has document splitting turned on.
Any help would be greatly appreciated.
Thanks

Hi Liz,
I´ve got the similar problem like you wrote.
My client had a reorg project behind and locked the old profit centers. For the reason of clearing open items and FX valuation those locked profit centers need either to be re-locked or the posting need to be posted to the new profit centers by using substition. Could you please kindly advicehow did you solved this problem?
OR maybe someone else can help?
Many thanks in advance.

Change Partners at item level for a LUMF

Similar Messages

Maybe you are looking for