CHANGE POINTERS-IDOC,BADI

For Transaction code XD01 we have implemented BADI for definition CUSTOMER_ADD_DATA_BI.In this implementation we are retrieving Email address from database. This whole Process is going in OUTBOUND PROCESS.
I am sending data by using CHANGE POINTERS method.
How can I implement BADI for INBOUND process?
As I know that INBOUNDPROCESS is automatic how it updates the data in Inbound Process.

You have to run the back ground job through the program RBDAPP01 (Transaciton BD20) to process the IDocs which you have created.
Reward if it is useful.
Thanks,
Srinivasa Rada

Similar Messages

CHANGE POINTERS -IDOC

For Transaction code XD01 we have implemented BADI for definition CUSTOMER_ADD_DATA_BI.In this implementation we are retrieving Email address from database. This whole Process is going in OUTBOUND PROCESS.
I am sending data by using CHANGE POINTERS method.
How can I implement BADI for INBOUND process?
As I know that INBOUNDPROCESS is automatic how it updates the data in Inbound Process.

HI,
Please go through the following links for change pointers.
[http://help.sap.com/saphelp_nw04/helpdata/en/12/83e03c19758e71e10000000a114084/content.htm]
[http://abapprogramming.blogspot.com/2008/01/ale-change-pointers.html]
Reward points if helpful.
Thanks and Regards.

How to filter change pointers using BADI - BDCP_BEFORE_WRITE?

Hi,
We have a scenario where due to various loads lot of change pointers are getting generated. Now I want to delete the unwanted change pointers based on some condition.
Through this forum I figured out that we can use the BADI -> BDCP_BEFORE_WRITE and create an implementation in it to clear the change pointers based on our conditions.
But could anyone please tell me when does this BADI gets triggered? I tried various options by putting a break point in the implementation, in CHANGE_POINTERS_CREATE function module etc but couldnu2019t see my BADI getting called or triggered.
I have my code placed in the implementation of this BADI but doesnu2019t have any clue when it gets called. I assume being this a standard filter BADI it should be called of itu2019s own but how can I check whether my code works or not. Wonu2019t there be any Transaction code which when executed will trigger this BADI. Any help on this will be appreciated.
Thanks.

Thanks again Amit. But still my question is at what event this BADI gets triggered.
Let me explain the code I have written.
LOOP AT change_pointers INTO lv_bdcpv.
    lv_tabix = sy-tabix.
    ws_c_objid      = lv_bdcpv-cdobjid(18).
    SELECT SINGLE cuobj klart obtab objek INTO t_inob FROM inob
    WHERE cuobj = ws_c_objid AND
          obtab NE 'KNA1' .
    IF sy-subrc = 0.
      DELETE change_pointers INDEX lv_tabix.
    ENDIF.
ENDLOOP.
This is the code written so that I can get rid of all the change pointers that are written which are not relevant to Customer.
But I want to know how this BADI gets executed, at what event or at by which TCODE or program?? I tried to change some classification data and and it created entry in BDCPV but are not related to customer. So how can I get this BADI executed so that it deletes the entry from BDCPV table?
When I check the BDCPV table the entries are still there as unprocessed.
Hope I am clear with my question. Any help will be appretiated.
Thanks,

Change pointers and RFC

Hi All,
Is it possible to implement change pointers without creating idocs, but with only RFC's.
Actaully i am goign through aproject document which says the interfaces are implemented using change pointers and BADI's.I was in a understandign that there would be idocs created to communicate the master data changes to other systems.
But one of the person who involved in the interface development said that there are no idocs related involved related to the interfaces, its all RFC's enabled.
Can anyone please let me know if change pointers can also be implemented using RFC.
Thanks in advcane.

Hi,
this is described sufficiently in SAPHELP - in a nutshell:
Changepointers - as the name says - point at changes (change documents). Therefore the creation is together with change documents (at the end of FM CHANGEDOCUMENT_CLOSE.
Chane pointers are created for ALE message types (tcode WE81). This does not mean, that any ALE message has to follow - there might be another subsequent action.
Writing of CP must be enabled with BD50. With BD52 the tables/fields are customized. Precondition is, that the data element of the table field is enabled for change documents and that change documents are created. BADI
BDCP_BEFORE_WRITE allows further refinement (or any other action triggerd by the change). Note that both - change documents and CP - are created in update task - so you have to activate update debugging to see it in debug.
Storage of CP is in table BDCP2 (since release 7.00 former releases use BDCP and BDCPS). Read pointers with FM CHANGE_POINTERS_READ and set them to processed with CHANGE_POINTERS_STATUS_WRITE. If more than aprox. 1 Mio. pointers are read an overflow may occur - use CHANGE_POINTERS_READ_MODE_SET to set an appropriate block size and CHANGE_POINTERS_READ_INFO_GET to stirr the further processing. All FM are documented sufficiently.
Have fun!
hp
Edited by: Holger Pakirnus on Sep 14, 2011 3:58 PM

Creation of Idocs from the change pointers by the program RBDMIDOC

Hello,
I'm Creating Idocs from the change pointers by the program RBDMIDOC.
The IDOCS Created using the message type HRMD_A are Correct but when i try to RUN RBDMIDOC for message type HRMD_B no Data is selected for distribution.
All the customizing are similar and i presume that all the change pointers are active (BD50 and IMG->Personnel Management -> Organizational Management -> Basic Settings -> Activate change documents).
Can anyone help me with the necessary steps to create this IDOC types.
Do anyone know if the RBDMIDOC report is the Same for messages HRMD_A and HRMD_B.
Thanks in Advance,
Pedro Ferreira

If the setting is fine, there may be some code in exit or badi for program RBMIDOC. Check the Exit and BADI.
check the exit EXIT_SAPLBD11_001 and
check the badi IDOC_CREATION_CHECK.
Probably there may be some code on these exits which are stoping your code from getting generated.These are the two trigger happen once u execute the RBMIDOC program.for HR, we use RHALEINI program to generate the idoc. but even RBDMIDOC works. These 2 triggere will come with RHALEINI also.
If there is no code here, Then there is problem in the setting only.

Change pointers and Idoc creation

Hello,
I would like to create change pointers for any changes regarding one of our customer infotypes: 9002 (hrp9002)
I was able to do that, however, I'm struggeling with the details.
The problem is that I do not want to send any data related to infotype 9002. I just need this change pointer to trigger idoc creation for the related objects.
Example: Let's assume that infotype 9002 gets created for position S 40001234. Once a night a customer report is executed via a job which reads all unprocessed change pointers (including the one mentioned above) and sends the corresponding object. In this case, an Idoc for the holder of position 40001234 should be created WITHOUT data for infotype 9002.
The message type is HRMD_A.
What do I need to do?
Thank you for your input.

Hi,
For Info type 9002 we need to implement Badi HRALE00CHANGE_PTRS using below code.
 LOOP AT t_changed_objects INTO wa_changed_objects .
 CASE wa_changed_objects-infty.
 WHEN '9002'.
 wa_cp_data-tabname = 'HROBJINFTY'.
 wa_changed_objects-plvar = '01' .
 wa_cp_data-tabkey = wa_changed_objects .
 wa_cp_data-cdchgid = 'U'.
* wa_cp_data-CDOBJCL = 'HRMD_A'.
 APPEND wa_cp_data TO t_cp_data1 .
 ENDCASE.
ENDLOOP.
IF t_cp_data1 IS NOT INITIAL .
 CALL FUNCTION 'CHANGE_POINTERS_CREATE_DIRECT'
 EXPORTING
 message_type = 'HRMD_A'
 TABLES
 t_cp_data = t_cp_data1
 EXCEPTIONS
 number_range_problems = 1
 OTHERS = 2.
 IF sy-subrc <> 0.
* Implement suitable error handling here
 ENDIF.
ENDIF.
This code will create entry in BDCP2 table.
After thsi populating segemnet you need to code for below exit as .
EXIT_SAPLRHAL_003
 IF PNNNN_NAME = 'P9002' .
*FIELD-SYMBOLS: <FS_plog> TYPE ANY. "Field Symbol for dynamic filling of data based on the structure
*Clearing the SUBRC
CLEAR SUBRC.
* fill workarea for infotype with infotype-data
ASSIGN pnnnn_data TO <FS_plog> CASTING TYPE P9002.
LS_9002 = <FS_plog>.
* move fields
MOVE-CORRESPONDING LS_9002 TO LS_p9002.
* fill IDoc-data with workarea for segmenttype
ASSIGN sdata_data TO <FS_plog> CASTING TYPE Z1P9002.
<FS_plog> = LS_P9002.
CONVERTED = ZCDP_IF_CONSTANTS_DTIRIS=>GC_CROSS .
ENDIF.
It will work fine.
Thanks
Anju

IDOC trigger using Z change pointers for standard SAP table

For IDOC trigger, is using custom change pointers on standard SAP master data tables, a good idea? A seasoned abaper told me "it will mess with the standard" and further told to go with scheduled job.
So, for example, say that my data for table T001K is updated via transports in PRD and I need to transfer this updated data via IDOC to an external system. Since there is no standard message type for this data, I will create a new one. Further, I will create a new change pointer for table T001K (it already has six fields with their data elements activated for Change Documents). Then I link the message type and the new change pointer. And so on an so forth. I have followed the procedure given here:SAP Tips: A to Z of Custom Change Pointer
Now, the question is, will this be a good idea to capture data and trigger IDOC? Or a batch program with calls to standard FM to read CDHRD/CDPOS be a more suitable option.
I need to know if a near instantaneous data transfer (and an effecient one as far as the system performance and reliability is concerned) can be acheived. If there is any other way of doing this, I am not aware of it!
Any one has any input/experience on this?

Hi Viktor,
I think the batch program approach would be a good solution as the by this way you are taking matter into your own hands rather giving control to the SAP framework because you may have to test out the other approach as to how the standard SAP framework is behaving for custom change pointers.
Thanks,
Ravi

How to find out what are all the change pointers assoicated for an idoc ??

Hi ,
How to find out what are all the change pointers activated for an idoc ??
Thanks,
Varma

Verma,
You can check what are the active Change Pointers for the message type in tcode BD50
Use tcode BD61 to check whether change pointers are active or not??
Hope this helps..

Change pointers not being generated in case of Z fields (extension IDOC)

Hello,
My requirement is of generating change pointers when fields from customer master change ( z fields).
Actually this is working for standard fields, but not for z fields .
I have created a Z segment and added fields 'ADRC-STR_SUPPL3' & 'ADR3-FAX_NUMBER' and have written appropriate code for populating them in 'ZXVSVU01' of exit 'EXIT_SAPLVV01_001' .
However, when I try to run change pointers transaction BD21, it says 0 idocs and 0 communication params generated.I have added those fields properly in BD52 (object class - ADDRESSE).
If you change standard fields along with Z fields, it works, but if you change only the Z fields , it doesn't trigger a change pointer.
Is there something extra that we need to do in case of object class 'ADRESSE' ?
Please help.
Thanks,
Rachna.

Were you able to resolve the issue?
If yes, could you please share what was done to resolve it.
Your help will be greatly appreciated.

Change pointers in idoc

This is to send the data from SAP to third party system . For data mapping, we have used the exit 'EXIT_SAPLRHA0_003' in the enhancement 'RHALE001' . Iam using the message type 'HRMD_A' and the basic type 'HRMD_A07' . I have activated the change pointers. How to test this?

Hi,
Please goto we02 and check whether the idoc is generated or not , when you change master data and executed RBDMIDOC.
If yes Check the segment to which you have made changes to populate the data using EXIT.
Thanks and Regards,
P.Bharadwaj

Trigger IDOC using change pointers

Dear All,
We are using change pointers for triggering IDOC's when a cost centere is creaed/changed/deleted.
We are using message type COSMAS for the same.
I have maintained all the necessary settings including Distrubution model.
When a cost centre is created or changed the IDOC is getting triggered ( After executing prgroam RBDMIDOC ).
But when we delete an cost centre the IDOC is not getting triggered.
I am able to see the releated entries in BDCP and BDCPV tables as well as CDHDR and CDPOS tables.
Can any one say how this can be achieved? When a cost centre is deleted then also IDOC should get triggered.
Regards,
SRavan

When we remove an Cost center it physically gets deleted from the data base.There is no delete indicator as such

Change pointers for DELVRY03 Idoc

Hi,
I need to trigger DELVRY03 idoc whenever a delivery document is changed. I understand that one cud trigger a idoc on creation of delivery document using change pointers. But is it possible to use change pointers on edit of del. doc as well??
Also i guess delivery document is transactional data, hence message control might have to be used, but I am not aware how to configure the same for delivery documents.
If anyone could give me the steps to configure message control then it would be helpful.
Thanks in advance
Anand Chavan

HI Anand
Same kind of problem discussed here...
Change pointers
Hope it will helps you...
Cheers..
Vasu
** REward Points if found useful **

IDOC HRMD_A + Change pointers + Infotypes change objects doesnt exist???

Hi guys,
I Have to send master data from infotypes 0002, 0006, 0032 and 0105 from HR to SAP PI. I've configured BD61, BD50 and BD53 to reduce Idoc HRMD_A. Then in BD52 I've tried to put this fields to activate change pointers when data from this infotypes is changed.
But in BD52 doesnt exist infotypes 0002, 0006, 0032 and 0105. I tried with object HR_IT1002, table HRP1002 and fields BEGDA and ENDDA, then run program RBDMIDOC and the Idoc is sent, but is possible with infotypes metioned????
Regards,
Pablo

Pablo,
are you able to see entries getting created in BDCP* tables
did you activate change pointers in BD53
Thanks
Bala Duvvuri
Edited by: Bala Duvvuri on Jul 29, 2010 10:35 AM

Custom idoc process code with change pointers

Hai gurus
Any body tell me how to maintain the change pointers in process code of our custom idoc.
Thanks
Krishna

Krishna,
can you write your request more detailed ?

ALE/IDOC-How to create Change Pointers for Custom Infotype

Hi,
My requirement is to transfer custom OM infotype changes using IDOCs.
But its not creating any change pointers for that infotype.
The message used is a copy of standard message OM_HRMD_A.
Can any one please help me out in this issue.
Thanks,
Sarika

Hi Sarika,
How did you solve this issue? We are also facing a similar problem, it will be helpful if you could explain how you found out the solution.
Thanks
Anu.

CHANGE POINTERS-IDOC,BADI

Similar Messages

Maybe you are looking for