Change pointers not being generated in case of Z fields (extension IDOC)

Hello,
My requirement is of generating change pointers when fields from customer master change ( z fields).
Actually this is working for standard fields, but not for z fields .
I have created a Z segment and added fields 'ADRC-STR_SUPPL3' & 'ADR3-FAX_NUMBER'  and have written appropriate code for populating them in 'ZXVSVU01' of exit 'EXIT_SAPLVV01_001' .
However, when I try to run change pointers transaction BD21, it says 0 idocs and 0 communication params generated.I have added those fields properly in BD52 (object class - ADDRESSE).
If you change standard fields along with Z fields, it works, but if you change only the Z fields , it doesn't trigger a change pointer.
Is there something extra that we need to do in case of object class 'ADRESSE' ?
Please help.
Thanks,
Rachna.

Were you able to resolve the issue?
If yes, could you please share what was done to resolve it.
Your help will be greatly appreciated.

Similar Messages

  • Change Pointers not being created for HR-PA Custom Infotype

    Problem Description:
    We have a custom Infotype in SAP to store the data for contingent employee - Infotype 9001. Change pointers is
    turned on. We are running the program RBDMIDOC to send changes to Oracle IDM using message HRMD_A. The change
    detected for all infotypes except 9001. For 9001, the change pointer is not created.
    The following are the current configuration details:
    IDOC Extension Created to Idoc type HRMD_A07 (ZHR_EXT)
    custom segment zhr_seg
    Change pointers are switched on.
    Change pointers switched on for message Type HRMD_A.
    IDOC configuration created for Port / Process code etc.
    Maintenance of view T777D - Added ZHR_SEG.
         If I add the segment ZHR_SEG as a 2nd segment to Infotype 0000, I dont get a syntax error. But the changes for Infotype 9001 are not picked up.
         If I add the segment ZHR_SEG as a segment to Infotype 9001, I get a syntax error - check EDI: Syntax error in IDoc (mandatory segment missing) below.
    EDI: Syntax error in IDoc (mandatory segment missing)
    Message no. E0072
    Diagnosis
    The segment ZHR9001 has the attribute 'Mandatory' in the syntax description of the basic type HRMD_A07 (customer enhancement ZHR_EXT). However, the segment is missing in the IDoc. The segment number logged in the status record identifies the item before which the segment is missing.
    This error may have been triggered by an unidentifiable segment before the expected mandatory segment.
    Procedure
    Please check the IDoc or the syntax description of the basic type HRMD_A07 (customer enhancement ZHR_EXT).

    Were you able to resolve the issue?
    If yes, could you please share what was done to resolve it.
    Your help will be greatly appreciated.

  • SWF File not being generated by compiler

    I am using Flash Builder 4.5.
    One of the modules that compiles without error is still not being bound into the runtime image (in this case debug).
    There are no compiler errors (auto build is switched ON) but a swf file is not being generated.
    I have tried removing the reference to the module in the Project ->Properties->Modules window and then adding it back in to no avail.
    This was working up until I made a change to the module in question and then saved it.

    I would check all imported images in the library. If you cannot see the image in your library preview; there is a good chance that there is an issue and it will need to be reimported.

  • TA1 Acknowledgement not being generated.

    Hi All,
    I have a requirement for the Inbound 820 to generate 999 and TA1 Acknowledgement. 999 is fine but TA1 is not being generated. I tried changing the ISA14 element to '1' from '0'(by referring http://docs.oracle.com/cd/E28280_01/user.1111/e10229/app_ta1.htm), but of no use. The ISA of the EDI file is as follows
    (ISA*00* *00* *30*905454545 *30*805454545 *130315*0758*^*00501*100000174*1*T*\~). I am using B2B 11.1.1.6.
    Please help me out with some suggestions.
    Thanks in Advance!!
    Edited by: soa999 on Apr 15, 2013 4:17 PM

    I am using B2B 11.1.1.6.TA1 Ack feature has been introduced in PS6 (11.1.1.7). So please use PS6 (11.1.1.7) to get benefit of this feature. If you cannot use PS6 then raise a SR with support to check if you can get a patch on top of PS5 (11.1.1.6) to use this feature.
    Regards,
    Anuj

  • Default Personnel No. Ranges not being generated through NUMKR

    Default personnel number ranges according to the company / client are not being generated. what should I do further to fix the problem?

    Hi first go to PA04 and maintain the different number ranges as stated above.
    01            1 to 2000
    02           2001 to 5000 etc
    here 01, 02 are different number ranges.
    In your case maintain a number range number 6 with a range as per your requirement.
    Then go to PE03 NUMKR feature.
    Create subnodes using Personnel Area with a return value as the number range number.
    So in you case decision tree should look like should look like
    NUMKR
    WERKS
    GUJ1 ( PA for Gujraat)
    06 ( return value = number range number )
    Hope this helps.
    Ajay

  • BPM alert not being generated

    Hi guys,
    I'm having quite a little trouble in doing one thing which has been done for several times but which is giving  me a hard time...
    I've created a bpm process which in an error condition will trigger a simple alert.
    I've tested the process and everything goes allright, except the alert. What is happening? Well, the alert is not being sent to my inbox. Why? Maybe because the alert is not being generated.
    I've went to sxmb_moni_bpe and everything is OK. I can see the message of the alert being fired. After that I went to slg1 to see if my alert is being generated, and the answer is no. It's not being generated....
    I've gone through Michal's blogs and everything was checked...The question is, if I execute RSALERTTEST with my alert category, the alert is generated and send to my inbox. Do you have any ideas?
    Thanks a lot for your attention

    Hi,
    Yes the job scheduling is needed only for Sp14 and below.
    Can you recheck if the Alert is actually getting triggered or not in the BPM in the control step? Make sure that you have given the correct Alert Category in your Control Step and also, make sure that the recipient in your alert as well as the Alert Inbox entry you are seeing is the same.
    Finally, refresh the Alert Inbox.
    Regards,
    Bhavesh

  • I've been editing images with ease for a long time but now the changes are not being saved.

    I've been editing images with ease for a long time but now the changes are not being saved.
    Also, it is not liking me adding a large ammount of images in one go?

    Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS.  So to get help you need to give as much information as you can. Basic things like :
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • HT4075 I tried the steps mentioned above but the changes are not being saved.

    I am not able to edit or merge PDF files. I followed the steps mentioned in the Mac support community but the changes are not being saved. Any solution to this?

    The link you posted gives be a 404 not found message. 
    The reason you're getting the repeat is because your site name is wilgenroos.nl and the first page of your site is wilgenroos. 
    The standard URL for domain names that are forwarded with the CNAME method is:
    http://www.domain_name.com/site_name/page_name.html.
    You can change the site and page names in iWeb to give you something more informative about the site and page.
    If you're publishing to a  3rd party server and want to get rid of the site name in the url and only have
    http://www.domian_name.com/page_name.html
    do the following:
    publish the site to a folder on your hard drive (already done)
    use Cyberduck to upload just the contents of your site folder to the root folder of your account on the server.
    You should delete the old site folder and files that are currently there beforehand.

  • Spool file not being generated in production server

    Hello
    Our end users are using automatic payment program F110 to print multiple cheques.
    The settings in SPAD are identical in Quality and Production Server,but some how
    spool file is not being generated in production.
    Test printing is fine in Quality server.
    Printer being used is Epson LQ 300.Device type is EPESCP2.
    We are using z custom page size ,and it is assigned to printer device Type as well
    Would be very great if some can can comment on which settings to check,as SPAD setting is
    same in both server ,yet no spool.Very Very urgent.
    Iam not sure ,whose domain is it now-BASIS or ABAP.
    Thanks a lot
    Nouman

    If there is a problem with the spool, the variant that is being in F110 parameters.
    As you are saying the quality system is working fine, please compare both the variants in Production and Quality systems.
    This should solve your situation.

  • Notifications are not being generated for any emails that have rules applied to them.

    Notifications are not being generated for any emails that have rules applied to them. Any clues how to fix this?

    In System Center 2012 Operations Manager, the alert notification will be sent when the alert first meets all criteria, regardless of resolution state, unless resolution state itself is a criterion. If alert suppression is enabled for the rule or monitor
    that raises an alert, only one notification will be sent when the subscription criteria are first met. No additional notifications will be sent until the alert is closed and a new alert is raised that meets all subscription criteria.  PLease check
    1) whether your rule has trun on alert supression
    2) Close the alert, craised by rule,  and do it again
    Roger

  • Reports not being Generated

    I use Crystal Reports with another program that supposed to generate 2 reports with a click of a button, but it is not working. The reports are not being generated. I installed Crystal Reports on my system twice and there doesn't seem to be a problem with the installation, but the program is not working. Please help.

    I am fairly new at this so let me try my best to answer these questions:
    Crystal Reports  XI
    Visual Studio? Not sure
    No service pack applied. How and where do i get it?
    I am using Windows XP
    I am not viewing the reports as it has to be generated before i am able to view and the systems does nothing after I click the generate button
    No  have not tried to view a single report; i don't know how.
    I have not used Crystal reports designer for anything else.
    Edited by: Sharon Aird on Dec 1, 2008 5:05 PM

  • ADDM report not being generated

    I noticed that addm reports are not being generated from last 2 days. So I did the following:
    SQL> exec dbms_workload_repository.create_snapshot;
    BEGIN dbms_workload_repository.create_snapshot; END;
    ERROR at line 1:
    ORA-13516: AWR Operation failed: only a subset of SQL can be issued
    ORA-06512: at "SYS.DBMS_WORKLOAD_REPOSITORY", line 10
    ORA-06512: at "SYS.DBMS_WORKLOAD_REPOSITORY", line 33
    ORA-06512: at line 1
    I got above error. I am not sure what that means. I also ran below SQL:
    SQL> select nam.ksppinm name, val.KSPPSTVL, nam.ksppdesc description
    2 from x$ksppi nam, x$ksppsv val
    3 where nam.indx = val.indx and
    4 nam.ksppinm = '_awr_restrict_mode'
    5 order by 1
    6 ;
    awrrestrict_mode
    FALSE
    AWR Restrict Mode
    What could be the reason that the reports are not being generated anymore

    Check Note:308003.1 - AWR Snapshots Not Generating

  • Emails not being generated using UDF

    Hi,
    We had setup a functionality to send email via UDF using the following blog.
    Mail without email adapter? Part - I - Process Integration - SCN Wiki
    This worked fine for some time. However, it does not generate emails anymore. There were no changes done on the objects. We checked the java mail service settings as suggested in some of the SCN posts and everything looks configured fine.
    We are not able to determine what is preventing the emails from being generated. Any pointers would be really helpful.
    We are using SAP PI 7.31 java only installation.
    Thanks,
    Ravi

    Hi Ravi,
    Did you check SMTP services availability?
    SMTP Configuration in SAP XI - Process Integration - SCN Wiki
    Regards,
    Krupa

  • Check Number not being generated

    We do not have SAP Check printing functionality activated right now. So the checks will be handwritten. When i created the Payment Method for check, I assigned RFFOEDI1 in the payment medium program. I also created the check lot for that House bank and Company code in FCHI. I created a variant for RFFOEDI1 although i dont really need anything printed. Now when I am executing payment run, the payments are being posted fine. The check number is not being populated. I checked the Register (FCHN) and there are no entries. The Vendor has CHeck payment method in the master record and the payment method is also assigned as "Checks" in the Invoice.
    Not sure what is wrong. Help is highly appreciated.

    Hi,
    In case you use the check printing program from SAP, it will generate the check information and will assign to the documents automatically. However it is upto you whether you need to print the checks or not? But the check numbers have been generated by SAP. You can manually create the check for the payment documents matching those check numbers.
    The only thing is that the manual control should be there so that the check is manually created with same number as system generated in payment run. (Otherwise, do not generate check in F110, rather create check manually and assign to payment document in FCH5.)
    Regards,
    Gaurav

  • @page imports not being generated wlas6 sp2

    Having problem with user imports not being inlcuded in the jsp java
              source
              which causes compilation errors. Have created a support case as well.
              This is WLAS6.0 sp2. NOTE: This is not a problem with SP1...
              

    getNetuiTagName is not working with weblogic9.2.So here is the solution.
    1. Set generateIdScope to true in ur <netui:html>tag
    <netui:html generateIdScope="true">
    2.In your javascript function
    document.getElementById('n0.searchQuery').focus();
    document.getElementById('n0.searchQuery').submit();
    here "searchQuery" is the id of your form.

Maybe you are looking for

  • Fell beside the garden with the shopping cart trick. Ah well.

    I had NO intention whatsoever of opening another account, as I really do have what I need for now. But all those pretty little things at VS got me and then they told me I was an Angel and offered me a preapproval when I went to pay, and from there I

  • Is there a way to work offline in safari?

    Is there a way to work offline in safari without archiving or saving a site to hard drive?

  • How to edit info?

    I just got my apple a few days ago. I transfered the songs to it and everything is fine except the title names and stuff. I want it organized to where its under just the artist name and not artist name/ feating artist. The main reason is I hook it up

  • How to open Safari in true fullscreen without the toolbar?

    Hi. I have been using SAFT for some year under Snow Leopard to get a true fullscreen webpage view. But after all new mac now are delivered with Lion pre-installed i have not been able to figure out how to get my Safari to open the homepage in true fu

  • The latest update for Mac will not download

    When I get the notice of the latest update and click on download it shows as downloading but stays like that all day