Integration problem: BW-BPS and portal reporting (ports)
Hi,
I have a question regarding to the integration of BW-BPS with the new portal. We have a BPS application with several planning interfaces (BSP) for the input of planning data. For reporting we are using the new portal functionality (BEx WAD templates). The BSP pages (ABAP) and the portal (JAVA) are working on different ports. We have integrated relative links into our BSP pages (/irj/servlet/prt/portal
) for the link between reporting and planning.
This was working fine until yesterday when we implemented the new support package 13 for BI. Before, it was possible to execute the portal reports with the BSP port. Now, this does not work anymore. --> Error the page cannot be displayed
The problem is that we are using a lot of these relative links within our BSP pages and they are all obsolete now.
We can not use absolute paths because we have a 3 stage architecture (with 3 different machines and 6 different ports).
Does anybody know how we could solve this problem on the server side (port mapping, etc.)?
Any help would be appreciated.
Thanks and regards,
Markus
Hi,
I thought this was a portal or IE browser issue, because I CANNOT see graphics but everybody else CAN!
Regards,
SS
Similar Messages
-
Outlook express integration with R/3 and Portal
Hi,
I have seen a new system setup where we can assign security group to a user in Outlook express and it will give some authorization in R/3 and Portal. I am first time seeing this concept .Can anybody pls explain me how to create the security group in outlook express and method of integrating it with both R/3 and Portal.
I appreciate all your help.
Thanks in advanceHi ,
Thanks for the link..
but its not the one I have been looking for ragarding the mentioned scenario.
!)A User will be present in both outlook express and SAP system ,when we add a security group (SG *) in outlook expressthe user will get authorization on Portal screen.
2) After assigning a role in R/3 ,we should add the security group to that use for some access permission.
Could u pls explain me how the concept could be and Integration method.
Thanks in advance
I appreciate all your help. -
Integration problem of OAM and OSSO/Portal
I have completed the OBE integration after having the issue resolved as reported in the thread:
troubleshoot WebPass installation
Here is the url for OBE
http://www.oracle.com/technology/obe/fusion_middleware/im1014/oam-osso-portal/oam-osso-portal.htm
In the end to test the portal login, test accounts , which the OBE provided, failing
+401 Unauthorized+
Your account has been disabled. Please contact the system administrator.
The accounts, portal and orcladmin cannot access the portal after the integration. This may be understandable since portal and orcladmin are not under the search base as the integration configured.
The test accounts cannnot access the portal. It may be due a missing step in the OBE. Such as the group for the portal access is not grant to the accounts.
Any one has successfully completed this OBE? did you add the step for the privilege granting?
Now seems not accounts could access the portal.
Since I cannot login the portal via portal nor orcladmin, I am not sure how to grant the privs to the accounts. But I can acceess OID via ODM. Can thst be done in ODM?Yes, one OID for the both.
I got the messages in the log
Wed Apr 07 15:14:10 EDT 2010 [ERROR] AJPRequestHandler-ApplicationServerThread-5 Authorization failed for user:
Wed Apr 07 15:15:02 EDT 2010 [ERROR] AJPRequestHandler-ApplicationServerThread-5 No site2pstoretoken from SSO partner
Wed Apr 07 15:15:02 EDT 2010 [ERROR] AJPRequestHandler-ApplicationServerThread-5 Unexpected Exception received
java.lang.NullPointerException
at oracle.security.sso.server.policy.FilePolicyManager.getAuthLevel(FilePolicyManager.java:396)
at oracle.security.sso.server.auth.AuthDirector.getAuthLevel(AuthDirector.java:234)
at oracle.security.sso.server.ui.SSOLoginServlet.doPost(SSOLoginServlet.java:480)
at oracle.security.sso.server.ui.SSOLoginServlet.doGet(SSOLoginServlet.java:333)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:826)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:332)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534) -
Problem with Collaboration and Portal accessed via multiple URLs
Here is the scenario. We have the portal installed that can be accessed from an external domain: portal.company.com. We recently upgraded to WCI 10gR3 and in the process we added an internal server that uses an OAM webgate which handles Integrated Windows Authentication. The URL for out internal access is portal.company.int. The problem comes when we try to access collaboration folders. From our internal URL when we click on a folder in Collab Documents the loading... text come sup and that's it. No other activity in the browser or in PTSpy. If we use the external URL there is no issue.
Anyone have any ideas on how we can get around this or what the cause could be?try to play with the collaboration server url (for the Collaboration Remote Server )
http://yourserver.com:11930/collab/
Enter the external url here, or better the name of the machine, something like
http://<machinename><yourdomain>:11930/collab/
See if works.
Hope that helps!
Val -
Active Directory integration problem, Bind AC and OD
Hi.
I'm trying to set an Open Directory as "connect to a Directory System" because I have a windows 2000 server with Active Directory. But i have a problem when i click on "open directory Access", Access Directory appear and I select Active Directory.
xxx.yyy is the server with active directory, with its admin and its password. but i cant Bind it and an error always appear.
can you help me?
what's "active directory domain"?is it xxx.yyy?
and what's "computer ID"?
Are there others parameters to set for example in DNS or other?
help help helpWhat are you trying to achieve by doing this?
Got to http://www.afp548.com/ and serach for AD-OD integration.
http://www.afp548.com/article.php?story=20051202151540574 -
Regd Integration of Domino.doc and Portal !! Urgent !!
Hi
I Want to know whether we can integrate Oracle 9i AS Portal with Domino.doc (which is used for document management).
I dont know much about Domino.doc .
Can anyone guide me whether the integration is possible or not and if so which documents should i refer to do the integration. i searched for domino.doc in oracle sites but i didnt encounter any useful document regd this.
Regds
Rajesh kanna.VHello Senthil,
yes, for the integration of the user interface of any Lotus Notes/Domino application you have the following options:
1: Rendering on Domino
- URL iViews to Domino Web App
- leveraging Enterprise Portal eventing for communication between the Domino iViews and other portal iViews
- leveraging Enterprise Portal styles for consistent look and feel
2: Rendering on Enterprise Portal
- using XSLT and ?ReadViewEntries to render NotesViews (flat and categorized)
- using XSLT and ?ReadEntries to render Outlines for Navigation. Also the assignment of such an iView to a pages dynamic navigation is possible. Navigation events are communicated through portal eventing
- using SOAP or web agents and DXL to render documents
SAP Consulting has alredy implemented all those options mentioned in customer projects. Please get back to me if you need more information or samples.
Regards
Michael -
Problems with vlan and dot1q trunking port
Dear Folks,
i have problems with my AccessPoint Konfiguration.
Even when i set the Catalyst Port to trunk, i can only connect to VLAN 1 but not to VLAN 10.
and if i change the port to statik vlan 10 i can not connect to the ap but it works...
config below:
User Access Verification
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname 1200_PP_1
logging queue-limit 100
enable secret xxxx
clock timezone A 1
ip subnet-zero
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
ssid DEPACNGLW0HS
vlan 10
authentication shared
infrastructure-ssid
mobility network-id 10
speed basic-1.0 2.0 5.5 11.0
rts threshold 2312
channel 2412
antenna receive right
antenna transmit right
station-role root
interface Dot11Radio0.1
no ip route-cache
interface Dot11Radio0.10
encapsulation dot1Q 10 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 port-protected
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
speed 100
full-duplex
ntp broadcast client
interface FastEthernet0.1
encapsulation dot1Q 1
no ip route-cache
bridge-group 254
no bridge-group 254 source-learning
bridge-group 254 spanning-disabled
interface FastEthernet0.10
encapsulation dot1Q 10 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 10.2.2.222 255.255.255.0
no ip route-cache
ip default-gateway 10.2.2.2
ip http server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag/122-15.JA/1100
ip radius source-interface BVI1
bridge 1 route ip
line con 0
line vty 0 4
login local
line vty 5 15
login
end
it would be fine if anyone could help me....You configure Layer 3 Mobility with WLSM. No trunking is required on the CAT switch. However, you need to set the switch port on the CAT switch as access port in VLAN 10.
Please post the WLSM and SUP720 configuration. Also, which VLAN do you want to access the AP?
The following URL may be useful for you to verify the configuration:
http://www.cisco.com/en/US/partner/products/hw/wireless/ps430/prod_technical_reference09186a00802a86a7.html -
TV sync problems- Daily Show and Colbert Report
Here is a strange problem I've been having- I have multi-passes to both the Colbert Report and the Daily Show and for the longest time they've worked great. But for some reason starting on the 10th going all the way through the 17th there has been an odd glitch. The episodes are there, but when I click on them the screen goes dark, freezes for a second, then goes back to the menu. I doesn't do this for the older episodes or for any of the other shows. Also, I have tried erasing and resyncing- I've even done a restore and I have the same problem. Anyone else had this?
I am having the absolutely same problem. My passes are to "My name is earl" and "the Riches". And... my downloads... don't run. OTher onese do. In the case of the Riches... 3 showed up at the same time, 2 short ones work the long one "Trust Never Sleeps"... will only run on Itunes, not the ipod. "FAIL THE EXAM". I am glad I am not the only one (sorry, sufferers)... APPLE, fix please.
-
Problems with VISA and the serial port
Hello,
i have a little problem with the serial port and VISA. I have changed an existing LabView- Software in that way that I have replaced the serial- module by the VISA- module. The function of the program is to communicate with different devices by RS232. After changing the modules to VISA the software doesn't work probably. The problem is, that when I try to communicate with one of the devices first I get no answer. When I try it a second time after some seconds the communication works perfect. After about a minute I send another message to my device but there is no answer again. I have to send the message again.
I hope someone in this forum can help me with my problem
cu MarcoMarco,
this sounds very much like a problem with the termination of your messages. You may have to tell VISA to add a termination character. Please follow the instructions in this document.
Best regards,
Jochen
National Instruments Germany -
Problem While packageing and deploying in port 7070.
hi,
i have installed application server i am able to deploy a example WAR file using autodeploy tool. While i tried to package & deploy another example using delopy tool i am getting 404 error.
While i ahve installed application server in 7070 port will that be a problem.
help me out.I got the problem solved by reinstalling application server.
-
Biometrics for PeopleSoft Time and Labor Reporting
Hello,
Can you please share any information regarding partners for Biometric identification integrated with PeopleSoft Time and Labor reporting?
I have an existing Peoplesoft customer interested in adding Biometrics to their implementation and they have asked for a "recommended" list of partner solutions.
A Google search turned up Kaba. Please understand I am not experienced in the Peoplesoft landscape, so any advice and direction is appreciated.
Thanks,
DeanDean,
I realize I'm a bit late to the Party here but there is another Oracle validated integration with PeopleSoft for biometric time clocks. Accu-Time's Cesium solution seamlessly integrates state-of-art biometric terminals with PeopleSoft Enterprise simply and accurately. These biometric time clocks are the only technology of it's kind available through an Oracle/PeopleSoft validated partner. Both skin surface and sub-surface are evaluated making the inaccuracies of traditional biometric technology due to dry, wet, dirty, extreme, demographic or skin condition irrelevant. Please reach out to me if you have any questions
Geoff -
Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
HassanYou said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet. -
Crystal Reports 10 and MX 7.0 Integration Problem
We have Windows 2003, MX 7.03, SQL 2000 and Crystal Reports
10 installed. When we run the Crystal report first time, it's okay.
The problem is when we try the second time, we will get the message
"Server Error The server encountered an internal error and was
unable to complete your request. Run closed connection." The only
way to get around this problem is to click on X to kill the browser
and try to run the report. Does anyone have the same problem and
know what caused this?I found what caused this. After turning off the debugging in
CF Admin, the problem went away. -
Midtier removal of Forms and Reports and Portal failing
Hi
I am having an issue removing the midtier of a forms/Report/BI and portal midtier,
The deconfigtool.pl hang and I am recieving the following message in a deconfigportal.log.
Invoking OPCA in DEINSTALL mode with the following arguments :
Install Mode : DEINSTALL
Portal Schema : portal
Connect String : cn=orcl,cn=oraclecontext
OID Host : hresources
OID Port : 389
OID Admin DN : cn=orcladmin
Use SSL to OID : N
Drop mode : midtier
STEP 1 : Deleting Portal Partner application
Parameters passed to SSO registration tool :
param0:-oracle_home_path param1:D:\Oracle\CoreMid param2:-config_sdk_papp param3:TRUE param4:-papp_schema param5:portal param6:-old_lsn_token param7:hresources.ncirl.ie param8:-update_mode param9:DELETE param10:-papp_password param11:**** param12:-pappDBConnect param13:cn=orcl,cn=oraclecontext param14:-ssoDBConnect param15:cn=orcl,cn=oraclecontext param16:-pass param17:**** param18:-schema param19:orasso_pa
-DinstallType=
-DoldOracleHome=
-DoldOHSUser=SYSTEM
Check D:\Oracle\CoreMid\sso\log\ssoreg.log for details of this registration
SSO registration tool failed. Please check the log file D:\Oracle\CoreMid\sso\log\ssoreg.log, correct the problem and re-run the tool.
STEP 2 : Deleting Portal DAD
STEP 3 : UDDI deinstallation
STEP 4 : Ultrasearch deinstallation
Anyone know how to get around this.And what does D:\Oracle\CoreMid\sso\log\ssoreg.log say?
Thanks
Shail -
Report Server 6i and Portal 3.0
I read through several white papers including "Security Tips in Oracle Reports Services Release 6i with Oracle Portal Release 3.0" and tried to start Reports server with no success but maybe I'm misunderstanding how it works. So I have the following questions:
1. We are running reports server on the same server as Oracle Portal and do not have any printers assign to this W2K server which is outside our fire wall. Will Reports server start with no printers assigned? I read out on metal link in Note: 109399.1 "It is no longer necessary to have the reports server service running on an account having a printer installed."
2. We only have port 80 open for the apache web listener. However the tnsnames.ora file requires an entry for the report server with a port=1949. Does this port need to be open?
3. Do you know how I can check to see which ports are available on W2K? Which are being used? IS there a dos command?
4. Is Report Server required to run Oracle Reports 6i through Portal 3.0 with SSO?
nullGregg,
1 - There is still a bug pending on this, so you may need to assign a default printer. This may be your issue of why you are unable to get the reports server running.
2 - No, port 1949 is only used between the reports cgi/servlet and the reports server. The communication between the client and the reports cgi/servlet is done on the http you are using (in your case, port 80).
3 - Don't know of any such utility or dos command to find our which ports are in use or available.
4 - Yes, you must have the reports server running to run Oracle Reports 6i through Portal 3.0. 6i is not using sso.
Regards,
The Oracle Reports Team
Maybe you are looking for
-
I found some tutorial on SUN site on how to use JNI. I'm using Eclipse to compije Java and C (via Cygwin) files. Here are complete files: Hello.java: class Hello public native void sayHello(); static try System.loadLibra
-
Hallo As I see, I have common problem among the Sun Messaging Server administrators. I have whole system distributed on several virtual solaris machines and some days ago emerged message size problem. I noticed it in relation with incoming mail. When
-
See here for a demonstration of what I'm talking about...makes me very nervous: http://www.youtube.com/watch?v=NLgQ22naQhE&feature=player_profilepage#t=139s
-
Events won't load from new to old
My events will not change from old to new even when I uncheck in the view menu.
-
Are there any controls over the yellow cycle bar?
Hello to all! I wonder if there are any means [shortcuts] of getting the yellow cycle bar to be placed at any chosen point of one's track? Presently I am using the cursor to drag and place it at the desired place, and also have to tug at its ends to