Change Request - Delete / Hide Subject

Dear All,
While creating CR using crmd_order for maintainance project, we have 3 subjects viz,
1. UC(maint)
2. Normal correction(maint)
3. Admin correction(maint)
Now I want to delete / Hide the 2nd one, Normal correction as we are not using this one.
The problem is for testing purpose we have created 4-5 documents using this normal correction & when i tried to delete this in spro >> Scenario-Specific Settings >> Change Request Management >> Extended Configuration >> Change Transaction >> Transaction Types >> Catalogue, Codes and Profile
system is throwing error as *Code 0020 is in use and therefore cannot be deleted
Message no. Q3221*
How can i hide or delete that entry, so that while creating CR, user should not select that option.
regds,
CB

Hi Channabasappa.K ,
You can create a custom transaction type from the standard ones by doing a copy as and then you can make the below mentioned desired configuration.
You will not be able to delete the existing change documents which you have created.
Let me know if you have any queries regarding the above.
Regards,
Sneha Vyas

Similar Messages

Change Request deleted from Buffer

Hello,
If a Change request is deleted from the buffer, before it is imported into the system.
Can we determine which user ID deleted the Change Request from the buffer?
Thanks,
Gautam.

Not sure ...if u can get this info directly....However have a look into the table E070USE...Might help!

Delete Change Request

i have a change request that I do not wish to transport. I released it since I cannot unlock this request. Even after I released it, I cannot delete either the task or request. How can I remove this request on my con system. Also, this request was created when I was changing this ABAP program, since I do not wish to have these changes at all, can I delete this version of the ABAP? If so how do I do it, I have not done this before. Your advise would be greatly appreciated.
Thanks & Regards,
satha

Hi Satha,
When the transport request is in Modifiable state, then you can delete it.
But after releasing the transport request, you cannt delete it.
While transport request release process it creates two files i.e cofile and data file in source system
Data file will be in usr/sap/trans/data
Cofile will be in usr/sap/trans/cofiles.
And also this file will be added to target system buffer.
You have to ask basis guy to delete the transport requests data file and cofile from above mentioned directory and also from traget system buffer.
This may help you.
Best Regards,
Kiranbabu

In Change Request Making a default subject

Dear all,
We are using SOLMAN 4 and SCM functionality.When we create a change request from charm_create transcation,i want to set in the subject line Urgent correction as default.How can we this?please help
Thanks in advance,
Avinash

Dear Henry,
I was not able to find a straight way to do that,but found a way around.
When you see the drop down menu of Subject,first it displays the codes of implementation cycle and then of Maintenance cycle.So to make the Urgent correction as the default one,i spro Soluman->Scenario-Specific Settings->Service Desk->Define code Groups and code for Catalogs (for catalog IB)changed the status of implementation in to "InProcess" from "Released".By this Urgent correction comes as the Default.In our case we are not using Maintenace Project for Change Management and so we are not having any problem by doing this.
If you are not using Charm for Imple. proj, you can do this.But as i told you it is not the straight way to do this.
Revert for any clarification.
Thanks and Regards,
Avinash.

Change Request - subject is Normal Corre. but its creating Correction SDMI

Hi,
When I am authorizing the Change Request(SDCR) it is creating Correction(SDMI) insted of Normal Correction (SDMJ).
Even though I am selecting subject as Normal Correction (Maintenance). what could be the reason ?
Regards
PK

Dear Prakhar,
Many Thanks. The problem is solved. I have run the same BC set & its working fine.
The problem is that this is the second time I am facing the Issue & it disappears after BC set is run every time.
I dont want every time to run the BC set, because if I do any customization & run BC set then it will remove the customized things.
Regards
PK

Subject field while creating the change request

Hi All
I want to populate the subject field in the change request by default.

Hi
The automatic population of the subject field while creating the CR through folloup transaction from Support message.
Regards
Kumar

Delete change request in transport queue

hi,
is there a possibility to delete change requests in the transport queue (stms)?
thanks
mike

hi,
Yes, you can delete change requests in transport queue.
You can do it in SE10. Place the cursor on the item and press delete button on application tool bar. If it dint get deleted. Then right click on request and press Sort/Compress . Then try deleting again.
Regards,
Sailaja.

Anyway to massively delete objects in a change request?

Under Object List of Request of the change request, there are so many entries that we find we can only delete one by one manually, is there massive deletion of all the object in the list?

Hi Kevin,
Talk to ur security person , he can add that .
Apart from that 3 options before the cancel relocation transport u will have unlock objects option.
Try this thing I am not sure it will work but
goto se01 > there is the Tools button in the second line under the menu bar > click on that .
It will also take u to the same screen but sometimes it may bypass the security and take u to the original se03 screen
Try this and lemme know
and talk to security person to add that option to ur role
Thanks
Regards
Majeed

Delete/Hide Completed Tasklist

Hi,
Is it possible to delete or hide completed tasklist ?
there is delete option in scma-->tasklist but it doesnot allow me to do so.
The task list cannot be deleted -> Long text
Message no. /TMWFLOW/TASKLIST195
Diagnosis
You want to delete a task list in Change Request Management, but you are not allowed to because there can be dependent data in other components.
BR,
Shyam

Shyam,
I assume you mean that you don't want to be able to select it from: Task List>Other Task List menu option. I don't think this is possible without deleting the Task List and I think it is not a good idea to delete task list anyway in case there are any dependencies.
You could use transaction /TMWFLOW/MAINTINST - Scheduling instead of SCMA directly. You can change view via "Status" button and set it to show only active task lists.
Paul

I am unable to change or delete my iCloud ID, it is prompting sign in using an old email address that used to be my Apple ID, others have had this same problem but the answer seems to be to delete the iCloud account but I can't do that.

I am unable to change or delete my iCloud ID, it is prompting sign in using an old email address that used to be my Apple ID, others have had this same problem but the answer seems to be to delete the iCloud account but I can't do that, because when I select delete account it prompts me to sign in on the old email address which doesn't exist anymore!! Please help!

Welcome to the Apple community.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID, verify the changes, enter the password as requested on your device and then turn off "find my phone".
You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

Change Request Management in Sharepoint

Hi - I've read through pages and pages of online content on ticketing/support systems etc. and somehow still can't seem to find something that best
matches what I want to achieve - So hoping someone can help...
I work in an IT Development office, and we currently have a very poor process in place for when clients submit change requests for our products
(systems). This comprises of client fills out excel form and sends to mailbox (and most of the time, 10 other recipients not needing to be CC), we pick up email and manually copy to list on Sharepoint, we review request and update excel doc on sharepoint,
then email user to check sharepoint for updates. Alongside this, any additional requests for info, etc. are all done by phone/email amongst various members of the development team, and also any comments we make about the request (which should only be visible
to us) are held on a separate list. Finally, we have an issue that all of the costing information is put into a tab in the excel document, which in theory can be opened by anyone who visits the list on sharepoint.
The process I WANT to have in place is as follows:
Client can login to Sharepoint and see options to either review open requests (only seeing request ID/Name and status) or submit a new request
Client fills out form online to submit new request, upon submission 3 things happen:
A) Client receives auto email thanking for request and advising of lead times for response, ideally with a pdf or similar copy
of their submission
B) IT Team receive an email stating there is a new request submission, ideally with a pdf copy of the request
C) Request goes into a list on Sharepoint, and then appears in two areas, one where the clients can see the request name and status only, and a second where the development team can see all of the information,
and make internal comments on the record which are invisible to the client. Finally, the client should ideally be able to click through on the status list to see the full request and our response/costings etc. However only the requester should be able
to see this much information about their request
IT Team review request, update status and provide feedback inc. costings where appropriate. Each time the status is changed on the request, it should email
the requester to advise the record has been updated/moved forward
So far the best I can do is customise a form in Infopath to show how I want to layout the client submission form, and get that to go straight into a list. The list being visible to any user on our global Sharepoint site, including them being able to click
through and see any of the information listed.
I'm relatively new to Sharepoint, and although I've achieved quite a lot in the short time I've been working with it, I just cannot seem to get my head around how to best do this. So some help would be really appreciated!

Hi - I've tried downloading SPD2010 on another pc, and attempted to use this to create a new workflow where I could use the Copy List Item function. However everytime I go through the process of trying to add a new workflow to my list, it lets me type in
a title and description, press OK, and it tells me to wait a moment, then the box disappears and I'm left on the same screen I started on with no new workflow added? I've tried this over and over this evening with no joy...
On your other option to create a new list item and populate using other fields, A. will this mean I have to write the copy for every field in my list? (I have about 40-50 fields, and I have to create 5 of these workflows in order to move my process through
the way I need it to), and B. surely if I delete the list item after telling it to pull from the other list, wont my data then disappear also considering it's pulling from there?
Thanks.

PO Release Strategy not changed after deletion of few line items with less

Subject : PO Release Strategy not changed after deletion of few line items with less Total PO
Dear Friends
We have issue with PO Release strategy. We have created the PO. with release strategy with multiple approvers. After approval of first approval manager , one of the PO line item got deleted and Total PO value is reduced . The new PO value should have changed the PO release strategy. But it is not changed. Old release strategy only showing in the PO which is wrong.
Details of the PO
PO no 4500000123 with 5 line items Total PO value : 100,000 USD Release strategy : AB
PO line item 5 deleted. Now total PO value changed to 50,000 USD and the PO release strategy should have been changed to AA but not changed. Still showing PO release strategy AB only.
Are there any OSS notes available to correct his bug.
Please let me know if you need more details
Thanks in Advance
Thanks
MVS

Hi,
release indicators change it to 4.It may works. Please explore to all 6 indicators..........
i.e,
1-cannot be changed
2-changable,no new determination of strategy
3-changable,new release in case of strategy
4-changable,new release in case of strategy or value change
5-changable,new release if new strategy/outputted
6-changable,new release if new strategy or value changed/ outputted......
And check Characteristic description and value in Classification of Release strategies ........
I hope this will help you. Thanking you.
Regards,
Venkat.

Hiding Status column in MSS Status Overview for Personnel Change Requests

Hi,
We have MSS implemented in SAP Portal.
We are using Status Overview for Personnel Change Requests iview for which we have multiple columns displayed with data.
We need to hide Status column in Status Overview for Personnel Change Requests iview for all the users.
Can any body please let me know how it can be done.
Regards,
Pradeep B
Edited by: pradeep balam on May 17, 2011 4:01 PM

Hi Pradeep,
Preview the portal page which you want to edit, in this case status overview in PCR. In the preview press the CTRL-key and right-click on the column that you want to edit. Here, you will be able to perform your customizations like hiding columns, labels etc
Hope it helps,
Prathamesh

Hiding the Personnel Change Requests in MSS

Hi,
In MSS, when the manager clicks on the workset "Create New Personnel Change Request" --> All employees are listed , after selecting an employee --> select form displays all the delivered personnel change requests. We will not be using some of those forms at all. Is it possible to hide these requests. It can be deactivated such that they cannot be opened, but we would ideally like to hide them and do not show the unwanted forms to the users at all...
Thanks,
Mark.

You can change the validity of the PCR scenario that needs to be hidden, to some period in future/past ie something like 01/01/9999 - 12/31/9999. This entry can be maintained in the view V_WPC_PCR_GROUPS via SM30/31.
~Suresh

SCSM "How can you change a Incident to a Change Request?"

I was wanting to know if there is a Automated script that if a Tech has a Work Item that came in as a Incident but is really a Change Request how they can convert it ot upgrade it to a CR. Right now we are having to Close/Delete the IR and then re-create
it as a CR. Any help would be great
Mark Rose [email protected]

I do not know an quick introduction to orchestrator, but I can help with the powershell in orchestraor.
There is an example creating a new cr @ scsm.se (you Need smlets installed - maybe the authoring tool Approach there fits your needs)
Extend this example using incidents, something like
$irclass=Get-SCSMClass-NameSystem.WorkItem.Incident$
$ir=get-scsmobject
-Filter'name
-eq IR63970'-Class$irclass
$Params = @{
ID="CR{0}"
Title="Recurring CR: "+ [datetime]::now
Description = $ir.Description
hth
Patrick Wahlmüller

Change Request - Delete / Hide Subject

Similar Messages

Maybe you are looking for