Delete change request in transport queue

hi,
is there a possibility to delete change requests in the transport queue (stms)?
thanks
mike

hi,
Yes, you can delete change requests in transport queue.
You can do it in SE10. Place the cursor on the item and press delete button on application tool bar. If it dint get deleted. Then right click on request and press Sort/Compress . Then try deleting again.
Regards,
Sailaja.

Similar Messages

Delete Change Request

i have a change request that I do not wish to transport. I released it since I cannot unlock this request. Even after I released it, I cannot delete either the task or request. How can I remove this request on my con system. Also, this request was created when I was changing this ABAP program, since I do not wish to have these changes at all, can I delete this version of the ABAP? If so how do I do it, I have not done this before. Your advise would be greatly appreciated.
Thanks & Regards,
satha

Hi Satha,
When the transport request is in Modifiable state, then you can delete it.
But after releasing the transport request, you cannt delete it.
While transport request release process it creates two files i.e cofile and data file in source system
Data file will be in usr/sap/trans/data
Cofile will be in usr/sap/trans/cofiles.
And also this file will be added to target system buffer.
You have to ask basis guy to delete the transport requests data file and cofile from above mentioned directory and also from traget system buffer.
This may help you.
Best Regards,
Kiranbabu

Change Request Management - Transport Request reimport

Hello,
I have read in a forum on SDN about the following behaviour of Change Request Management in case of a Maintenance Project: after completing import to production environment through Normal correction, when the same maintenance cycle
is used again, ChaRM reimports all the TP's imported in the previous run.
In case of an Implementation Project with Normal correction I guess that this can not happen for an import to Production environment, because it's not possible to use again the same cycle, is it right?
But if we consider the import to Test environment: for example, during a Project cycle, transport request TR1 is imported to Test environment, then cycle status is set again
to "In development" and a new transport request TR2 is created. Is TR1 re-imported, when TR2 is imported to Test?
Thansk a lot,
Stefano

Hi,
Whenyou import a normal correction as per the recommedations from SAP they are asking to de select keep for further imports options,so that when we import other request it will not import the older request.
Please revert for any clarifiaction,
Thanks and Regards,
Avinash.

Changing from local change requests to transportable

Hi gurus
i have a system that has transport system set to Local change Requests and would like to transport them into another system .The transports have been released .what is the quickest way to change this without redoing the transports?
Any ideas are welcome

Hi,
did you configure STMS and transport route?
if yes then process as follows.
create new workbench request using SE10
SE10 -> create -> workbench request ->
give the description and target system SID.
select the request and click on include object ( ctrl + F11) check object list from request and enter you local transport request number. -> enter
release the new request and import it in target system.
regards,
kaushal

Delete request in transport organizer

If I accidentally collect many unwanted infoobjects in the request, so i need to delete the request in transport organizer. Now I can only delete the info object one by one. If there a feature that i can select all of them and delete all?

Go to SE03 --> under folder Requests / Tasks --> dbl click on "Unloak Objects (Exper tool)"
from the next screen, enter Request no and execute..
unloack all requests that u want to delete. (childs requests and then parent request).
Thnen go to SE09 --> delete those requests, which were unlocked

Tansportable request change to local change request by mistake

Hi,
I have a standard 3 system TMS, DEV,QAS, PRD
I delete the virtual QAS and active the transport route by mistake, and all the transport able request changed to local change request...
and now I have configured the TMS in the right way.
and can create the transportable request.
How can I move the old requests back?
From local chang request to transportable request?
Many thanks.
BR,
Randy

Hi ,
I remeber doing something like this.
SE01--> Create a transport of copies request --->create new request ---> then to the new requset ---> go to the Request/task (menu item) -
> other request (here we can choose which transport we want to include in this new TR) .
I am not really sure why we choosed like Transport of copies and why not others.etc.
Even I need to read more about this.I remembered that this worked for us.
Hope this helps you too .
Thanks.

Delete imported requests by job

Hi there,
i am looking for way to delete imported requests from import queue by a job.
Thanks in advance,
Jens

you can schedule job as OS level
tp cleanbuffer <SID> pf=<TRANSDIR>/bin/<TPPROFILE>
this will only clear the successfully imported transports from buffer.
cheers,
-Sunil

Change Request Errors

I am enable to Release My change request ,it is showing me errors when i am trying releasing the request can anybody help me out .

Hi
Please be specific, what is the error that you are getting.
If it is
1) Update error occurs while releasing the change request for objects.
Then implement sap note 846128
2) Check if the chage request is generating a short dump.
With that, analysing becomes easier.
3) You enter requests which are approved via request workflow. During the release via the workflow no checks of the request are carried out, so that this can result in problems.
Refer note 501335 for this issue.
4) The error could be because, In Change Request a transport request is released using an action.
For this refer note 1117422.
Hope this helps
Regards
Shilpa

Need TP command for Add Transport Request to import Queue all at a time

Hi SAP gurus,
Can you tell the o/s or TP command to Add   Transport Request to import Queue all at a time which are available in co files directory   ,
Because I have to add 500- 600 request . For every request I canu2019t do like this STMS_IMPORT -- Extras=> other requests -add--
Thanks and regards
babu

Hi,
You can export list of all transport requests from your DEV system in one shot, from SE09-> Display (provide your required selection criteria) -> Goto -> "Display as List"
You can export these all Transport Requests as Spreadsheet. Then Filter out all your required 400 to 500 Transport Requests.
Now,use another excel sheet to create a file with the list of required transport request Nos only, then concatenate all of them to generate the required TP commands as mentioned below.
The syntax will become as follows:
column1           column2         column3
tp addtobuffer DEVK900123 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900124 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900125 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900126 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900127 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import          DEVK900123 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import          DEVK900124 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import          DEVK900125 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import          DEVK900126 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import          DEVK900127 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
-> Open Notepad and Copy+Paste these three columns & save the text file in the <Drive>:\usr\sap\trans\bin\ folder.
-> Then rename this .txt file to *.bat.
-> open a command prompt and change to the <Drive>:\usr\sap\trans\bin\ folder and run the .bat batch file.
Make sure that object lists of all the Trans. Requests are checked and confirmed for the transport to avoid data incosistency in target system. (e.g. Number Range Object)
Regards,
Bhavik G. Shroff

Transporting a change request created in SNOTE

Hello all,
I'm fairly new to all this so hopefully there's an easy solution to my problem. I've implemented an OSS note correction in our BW development system via transaction SNOTE. This worked fine and during this process I was prompted to create a new local change request and did so. My problem comes when I'm trying to transport this request to our BW QA system. I released the request in development but when adding it to the transport queue in QA I get an error:
"Transport control program tp ended with error code 0247"
Our transport system is currently working normally so I think the problem is with the request. Does this change need to be in a Customizing request or a Workbench request? Please advise.
Thank you.

Hi Ganesh,
Can I ask something about inactive object here?
I applied notes with SNOTE. But all objects are inactive.
When I activete them, The system requires accesskey.
How could this happen? And any solution for this?
I can't deapply the notes any more. coz it's bug fix for SNOTE.
If I do this, the system will be inconsistent, this happened beffore
Thanks
kaz,

Transporting local change request

Hi all,
I had updated an include (MV50AFZ1 - SAP standard one - used access key to change this) to copy STO header and item texts to delivery when delivey documnet was created. This was created as a local change request. My basis guy tells me that this request cannot be transported.
Kindly let me know how this can be done.

Hi,
Go in that include and change it once thenit will ask for the package name to save , then save it in a package so that a new request will be created.
If it is not happening..
Then in the menu of ur include <b>goto->object directory entry</b> change the $tmp to new package,
then it will ask for the request...
or
else the best way is to delete the old local request.. then if u save it, it will automatically ask for the package and then u can able to create a requset...
Cheers,
Simha.

Anyway to massively delete objects in a change request?

Under Object List of Request of the change request, there are so many entries that we find we can only delete one by one manually, is there massive deletion of all the object in the list?

Hi Kevin,
Talk to ur security person , he can add that .
Apart from that 3 options before the cancel relocation transport u will have unlock objects option.
Try this thing I am not sure it will work but
goto se01 > there is the Tools button in the second line under the menu bar > click on that .
It will also take u to the same screen but sometimes it may bypass the security and take u to the original se03 screen
Try this and lemme know
and talk to security person to add that option to ur role
Thanks
Regards
Majeed

HOW TO USE FUNCTION Deletion of Requests from the Change Log IN PRCSES CHAN

Respected all
i used Deletion of Requests from PSA from the prcess chain and found good results, now i have only one request at the psa and thus i am doing good space utililisation. but when i am using Deletion of Requests from the Change Log i am not getting any changes in the request of dso. kindly let me know how to use this 2nd function.
thanks
abhay

Hi Mahodaya,
As per SAp standards its good to delete the requestes that are no longer needed for the delta update and no longer used ffor inti from the change log table and the data is loaded already in to DSO.
Goto RSPC
Click on create New PC -> enter the PC name n long descp
Next we need to define the start process for the PC.Maintain the start variant process.save n come back.
for deletion of change log we have option in the Other BW Processes -> deletion of requestes from change log
Once u select the option we get a dialoge box here we need to create the variant for the process enter the process variant n long descp. cick ok.
Next in the maintenance screen for the deleting the request from change log table will appear.
Enter the selection patterns to which the requestes should be deleted from the change log.
In the maintenance screen, select one or more Data Store objects for which requests are to be deleted from the relevant change log tables under Data Store Object column and select theInfo Area of the corresponding Data Store Objects under Info Area
If you select the first check box exclude selction pattern, this means that del of requests from change log table will be ignored.
or
We can delete the requests which are Older than N-number of days (or) date in the above screen. For this one, enter the number of days (or) date in the filed Older than .
OR
If we want to select the requests with a certain status then we can also do in the above screen. We can select the following status indicators from the above screen.
Delete Successfully Updated Requests Only -This status will delete only requests which
are successfully updated into corresponding Data Store objects.
Delete Incorrect Requests that were not Updated - This status will delete only incorrect requests which are not successfully updated into the corresponding Data Store Objects.
Delete Activation Requests only, No Load requests- This status will delete only the activation requests (requests that begin with ODSR_... ). No load requests are deleted.

Delete overlapping request when month changes

Hi Experts,
Delete overlapping request works fine for all the days but when month changes it is not deleting the request as the filter value gets changed.
I have three Info Package and DTP like below:
Current Month -2
Current Month -1
Current Month
In January selection values are:
Current Month -2     201111
Current Month -1     201112
Current Month         201201
As the month changes, February selection values are:
Current Month -2     201112
Current Month -1     201201
Current Month         201202
We need the request which has selection criteria 201111 should stay, but 201112 and 201201 should get deleted as these two request are duplicated.
Please advice if we have any solution for this issue.
Suggestion will be appreciated.
Thanks,
Muiz Ahmed

Yes Sven,
You are correct,
31-Jan-2012 Current Month -1 had loaded 201112
1-Feb-2012 Current Month -2 had loaded 201112
Now I have to delete request which has got loaded on 31-Jan-2012.
For now I have deleted manually, but I want automate this activity, so no manual intervention is required.
Thanks,
Muiz Ahmed
Edited by: MUIZ AHMED on Feb 1, 2012 7:40 PM

Last active change request of a object which has been transported

Hi to all,
I need a method to obtain the last active change request of a object which has been transported to the corresponding target system. I know that the CR tables are E070 and E071, but how can I know the last active and transported CR of each object? Any suggestion?
Thank you very much,
Antonio

Hi Antonio, As u are aware that you can get TR information from E070 and E071 tables.From these two tables we can get the latest TR. In table E070 there are two fields with AS4DATE, AS4TIME.So, U can find the latest transported object on these two fileds.Also, u need to check the TRSTATUS field which specifies whether the object is transported ( R Released) or still Modifiable( Active as D).
However this table will also contains subtasks and main request. This can be diffrentiated with the help of STRKORR field of E070. If blank then its a main req else its a subtask where the field would contain the Main Request No.
Hope this would be of some help for u r development.
Regards,
Swaroop

Delete change request in transport queue

Similar Messages

Maybe you are looking for