Change section layout type within a dialog box?
Is it somehow possible to change the section layout type within a dialog box? I want to create a non-trivial dialog box which contains a formular and a list component side by side. In a standard page of an GAF or OVP it is possible to change the section style to a 2-row Layout. But in a dialog box page this possibility is disabled. Is there any reason for this? If it is not possible to change to layout, is there any other way to place two UIBBs side by side in a dialog box?
Best regards,
Thomas
Hi Aliaksandr,
sorry, you are right, I had a two column layout in mind but I was faster in writing than thinking
What do you mean by a "composite component"? Is this an FPM concept/UIBB or have I go back to WDA programming to make use of it? Do you have some more information about it for me?
Thank your very much,
Thomas
Similar Messages
-
How to add list of multiple file types to file type of file dialog box in LabVIEW
How to add list of multiple file types to file type of file dialog box in LabVIEW?
In file dialog box there is option to add only one file type,in the list,not by seperating commas,
regards,
Naresh.NWrite the file types in pattern Input string, separated by a semicolon ;
For example: *.vi;*.doc;*.jpeg;*.xls
This should return the set of files with matching extensions
Message Edited by devchander on 09-10-2008 08:02 AM
Message Edited by devchander on 09-10-2008 08:03 AM -
How to add array of file types to file dialog box
Hi
I just want to know how to add array of file types in file dialog box vi. I know that multiple file type can be added to filedialog vi in the pattern Input string separated by semicolon (eg *.vi;*.doc;*.jpeg;*.xls). But i want file dialog which is shown in the below picture.
I think that file dialog vi call user32.dll but i don't have that header file to call that dll.
Waiting for your esteemed response.
Thanks & Regards
Samuel J
System Engineer
Captronic Systems Pvt Ltd
Bangalore, India.I'm not sure how (or even if) it can be achieved using the LabVIEW built-in open dialog, but a .NET call to openfiledialog (http://msdn.microsoft.com/en-us/library/system.windows.forms.openfiledialog.aspx) can do what you're looking for. The .NET functions are better documentented that simple user.dll calls, so it might be easier to implement.
Shaun -
Keyboard input to change the default selection in a dialog box.
Hello,
Let say I close a file that I had just edited without saving. I'll then have a dialog box "do you want to save?" with "yes" as default. If I do not want to save my changes, how can I select "no" or "cancel" with the keyboard?
I'm sure this is an easy one for a long time Mac user.
ThanksAs a matter a fact there is. Just hit the first letter of the choice n = no, c=cancel etc. Edit. I tested this in Word for Mac and it worked but other programs don't so the method below is best.
An alternate method is to tab to the choice and hit enter.
Cheers
Message was edited by: captfred -
Passing Values to a dropdown list within a dialog box
I am using the app.execDialog(dialog1) command to display a dialog box on my form. The dialog box contains dropdown list (popup). I have found examples that do this but in all the examples they reference the loadDefaults function with hardcoded values.
For example:
loadDefaults: function (dialog)
dialog.load(
subl:
"Acrobat Standard": "111",
"Adobe Reader": "222"
Does anyone know if there is a way to pass values into the loadDefaults via a variable etc.. I can get the data I want to populate the dropdown with but I cant figure out how to load it into the control.
Thanks
KenHi scamp, not sure what you're asking. What do you mean by "pass" fields from one list to another? If you need information in list 1 to show in list 2, just create lookup columns in the SharePoint list. If you mean you want to add columns to
list 2 automatically, you'll need to make a designer workflow for that.
cameron rautmann -
the boxes include rulers and scrollbars, but I'd like to size all of them the same
I'm starting to come to this conclusion myself, actually... though, how mom managed to do this on accident without mucking about in terminals or anything more than just a cursory knowledge of the OS X system configurations (behind the scenes), I don't know : |
... on the other hand, her and I tend to be the exceptions to a lot of rules : |
I downloaded and installed TinkerTool, even though it supposedly doesn't work past 10.5.8, in the hoopes that, what it displayed (regardless of what it could change) would be correct as far as my "System" and "System (Headlines)" font settings were (see attached screenshot of the font section of TinkerTool for my system--not mom's).
I've instructed her to install and run the utility (but not to change anything) and then send me a screenshot of the "Fonts" section so I can compare it to my own. If there's something different on her system, since TinkerTool should work on hers, we may be able to fix it that way... though it would, frustratingly enough, remain a mystery to all concerned as to how she managed to stumble upon this in the first place : |
Anyway, I'm still hard at work on it... hopefully others are too and will share what they discover (if anything). -
Limiting Export Types in Export Dialog Box
We'd like to only allow XLS Format for a specific report when displaying a Crystal Report on a WebPage via Visual Studio;
We run Crystal Reports 2008 and also post on Business Objects so the users can access via Infoview.
the only thing I've found is a hack to change the underlying Java code for Crystal that would affect all the reports... and some other thing for Visual Studio that doesn't work as it is for prior versions of Crystal. Please advise how we go about allowing the end-users to have the option of exporting to only one FileType (XLS) for only one specific report.In Cr for VS 2010 you can use this to control the export types allowed when viewed:
// set up the format export types:
int myFOpts = (int)(
CrystalDecisions.Shared.ViewerExportFormats.RptFormat |
CrystalDecisions.Shared.ViewerExportFormats.PdfFormat |
CrystalDecisions.Shared.ViewerExportFormats.RptrFormat |
CrystalDecisions.Shared.ViewerExportFormats.XLSXFormat |
CrystalDecisions.Shared.ViewerExportFormats.CsvFormat |
CrystalDecisions.Shared.ViewerExportFormats.EditableRtfFormat |
CrystalDecisions.Shared.ViewerExportFormats.ExcelRecordFormat |
CrystalDecisions.Shared.ViewerExportFormats.RtfFormat |
CrystalDecisions.Shared.ViewerExportFormats.WordFormat |
CrystalDecisions.Shared.ViewerExportFormats.XmlFormat |
CrystalDecisions.Shared.ViewerExportFormats.ExcelFormat |
CrystalDecisions.Shared.ViewerExportFormats.ExcelRecordFormat);
//CrystalDecisions.Shared.ViewerExportFormats.NoFormat); // does nothing except show no export types
//int myFOpts = (int)(CrystalDecisions.Shared.ViewerExportFormats.AllFormats);
crystalReportViewer1.AllowedExportFormats = myFOpts;
Don -
HT1343 Is there a shortcut for "Revert Changes" in the Close/Save confirmation dialog box?
In OS X 10.8 Mountain Lion, the Close/Save confirmation dialog asks the user:
Do you want to save the changes made to the document “Screen Shot 2012-10-12 at 12.35.12.png”?
Revert Changes Cancel Save
Is there a keyboard shortcut for this command, as there is one for Delete (Cmd+Delete) in new document closing confirmations?I'm not sure if there is a shortcut (I didn't find one), but if you turn on Full Keyboard Access in the Keyboard system prefs, all controls can be accessed from the keyboard. You can tab through (or arrow keys) the buttons. The active button will be outlined and can be activated with space bar. Since Revert Changes is the first button, it will come up outlined and you can just hit the spacebar to choose it.
-
Hi,
I have an ALV on suppose screen 3000, I have created a button in the tool bar to call another ALV, but my question is, can we display ALV in modal dialog box screen(because the requirement is to display ALV as a popup)
So when i changed the screen type to normal screen, my alv is coming,,but when i change the screen type to modal dialog box, then no ALV is being displayed in the output. Only blank screen is displayed.
Can you please help me.
Thanks.Hello
The problem is that you have to take into account that the ALV in the popup (or modal dialogbox) is displayed on a different screen level:
level 0 = main screen
level 1 = 1st popup
level 2 = 2nd popup
We have up to 9 screen level available.
The following sample report ZUS_SDN_ALV_IN_POPUP is a variant of my sample report ZUS_SDN_TWO_ALV_GRIDS.
Depending on whether you mark P_POPUP or not the second ALV grid is additionally displayed on a popup.
*& Report ZUS_SDN_ALV_IN_POPUP
*& Thread: ALV in modal dialog box
*& https:||<a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="762642"></a>
*& Screen '0100' contains no elements.
*& ok_code -> assigned to GD_OKCODE
*& Flow logic:
* PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
* PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
REPORT zus_sdn_alv_in_popup.
TYPE-POOLS: abap.
DATA:
gd_okcode TYPE ui_func,
gd_repid TYPE syst-repid,
" containers and ALV grids for main screen
go_docking TYPE REF TO cl_gui_docking_container,
go_splitter TYPE REF TO cl_gui_splitter_container,
go_cell_top TYPE REF TO cl_gui_container,
go_cell_bottom TYPE REF TO cl_gui_container,
go_grid1 TYPE REF TO cl_gui_alv_grid,
go_grid2 TYPE REF TO cl_gui_alv_grid,
" container and ALV grid for popup
go_docking3 TYPE REF TO cl_gui_docking_container,
go_grid3 TYPE REF TO cl_gui_alv_grid,
gs_layout TYPE lvc_s_layo.
DATA:
gt_knb1 TYPE STANDARD TABLE OF knb1,
gt_knvv TYPE STANDARD TABLE OF knvv.
PARAMETERS:
p_popup AS CHECKBOX DEFAULT ' '.
* CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING
e_row
e_column
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
* CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
* define local data
DATA:
ls_knb1 TYPE knb1.
CHECK ( sender = go_grid1 ).
READ TABLE gt_knb1 INTO ls_knb1 INDEX e_row-index.
CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
IF ( p_popup = abap_true ).
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'POPUP'
* IMPORTING
* rc =
ELSE.
* Triggers PAI of the dynpro with the specified ok-code
* * CALL METHOD cl_gui_cfw=>set_new_ok_code( 'DETAIL' ). " not on 4.6c
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'DETAIL'
* IMPORTING
* rc =
ENDIF.
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
" Select data
SELECT * FROM knb1 INTO TABLE gt_knb1
WHERE bukrs = '1000'.
PERFORM init_controls.
* Display data
gs_layout-grid_title = 'Customers'.
CALL METHOD go_grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'KNB1'
is_layout = gs_layout
CHANGING
it_outtab = gt_knb1
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
gs_layout-grid_title = 'Customers Details (Sales Areas)'.
CALL METHOD go_grid2->set_table_for_first_display
EXPORTING
i_structure_name = 'KNVV'
is_layout = gs_layout
CHANGING
it_outtab = gt_knvv " empty !!!
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
gs_layout-grid_title = 'Customers Details (Sales Areas)'.
CALL METHOD go_grid3->set_table_for_first_display
EXPORTING
i_structure_name = 'KNVV'
is_layout = gs_layout
CHANGING
it_outtab = gt_knvv " empty !!!
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
gd_repid = syst-repid.
CALL METHOD go_docking->link
EXPORTING
repid = gd_repid
dynnr = '0100'
* CONTAINER =
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the popup
gd_repid = syst-repid.
CALL METHOD go_docking3->link
EXPORTING
repid = gd_repid
dynnr = '0200'
* CONTAINER =
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* NOTE: dynpro does not contain any elements
CALL SCREEN '0100'.
* Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*& Form INIT_CONTROLS
* text
* --> p1 text
* <-- p2 text
FORM init_controls .
* Create docking container
CREATE OBJECT go_docking
EXPORTING
parent = cl_gui_container=>screen0 " main screen -> level 0 !!!
ratio = 90
EXCEPTIONS
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create splitter container
CREATE OBJECT go_splitter
EXPORTING
parent = go_docking
rows = 2
columns = 1
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Get cell container
CALL METHOD go_splitter->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = go_cell_top.
CALL METHOD go_splitter->get_container
EXPORTING
row = 2
column = 1
RECEIVING
container = go_cell_bottom.
* Create ALV grids
CREATE OBJECT go_grid1
EXPORTING
i_parent = go_cell_top
EXCEPTIONS
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER: lcl_eventhandler=>handle_double_click FOR go_grid1.
CREATE OBJECT go_grid2
EXPORTING
i_parent = go_cell_bottom
EXCEPTIONS
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
" Create container and grid for popup.
* Create docking container
CREATE OBJECT go_docking3
EXPORTING
parent = cl_gui_container=>screen1 " !!! popup !!!
ratio = 90
EXCEPTIONS
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
" NOTE: Starting from a main dynpro (screen level 0) the first popup
" (or modal dialogbox) is on level 1 !!!
" Using cl_gui_container=>screen0 fails to display ALV grid.
CREATE OBJECT go_grid3
EXPORTING
i_parent = go_docking3
EXCEPTIONS
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " INIT_CONTROLS
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
* SET TITLEBAR 'xxx'.
* Refresh display of detail ALV list
CALL METHOD go_grid2->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
EXCEPTIONS
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE syst-dynnr.
WHEN '0100'.
CASE gd_okcode.
WHEN 'BACK' OR
'END' OR
'CANC'.
SET SCREEN 0. LEAVE SCREEN.
* User has pushed button "Display Details"
WHEN 'DETAIL'.
PERFORM entry_show_details.
WHEN 'POPUP'.
PERFORM entry_show_details.
go_grid3->refresh_table_display( ). " required
CALL SCREEN '0200' STARTING AT 5 5
ENDING AT 150 30.
WHEN OTHERS.
ENDCASE.
WHEN '0200'.
set screen 100. leave screen.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form ENTRY_SHOW_DETAILS
* text
* --> p1 text
* <-- p2 text
FORM entry_show_details .
* define local data
DATA:
ld_row TYPE i,
ls_knb1 TYPE knb1.
CALL METHOD go_grid1->get_current_cell
IMPORTING
e_row = ld_row.
READ TABLE gt_knb1 INTO ls_knb1 INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT * FROM knvv INTO TABLE gt_knvv
WHERE kunnr = ls_knb1-kunnr.
ENDFORM. " ENTRY_SHOW_DETAILS
Regards
Uwe -
Has anyone else seen this dialog box graphical phenomenon?
Hi,
I'm running 10.5.4 on a MacBook Pro (4,1) and have noticed a strange effect on some dialog boxes in Leopard - darker grey blocks appear around text, controls and buttons within the dialog box. The effect occurs on both the MacBook Pro display and the Cinema Display it is connected to.
See the following links for examples:
http://www.flickr.com/photos/jammylammy/2732289268
http://www.flickr.com/photos/jammylammy/2735071703
http://www.flickr.com/photos/jammylammy/2738394376
So far it appears in dialog boxes from Entourage, Photoshop & Illustrator (both CS2 & CS3) and iTunes. I initially thought it was only occuring in PowerPC apps running under Rosetta but iTunes is a native Intel app.
Not all dialog boxes are affected - it doesn't appear in Safari, for example:
http://www.flickr.com/photos/jammylammy/2735078907
The boxes are still perfectly usable and it doesn't appear to be a monitor brightness issue as it occurs whatever the brightness setting. I wondered if it was related to the Nvidia graphics card issue (the Macbook Pro is fitted with a GeForce 8600M GT 512MB graphics card) but haven't been able to find any mention of this on these forums or through a wider Google search.
Has anyone else come across this strange phenomenon?
Thanks!
Johnclintbradford wrote:
...strange phenomenon...
Isn't this just a situation where some apps' code is written differently than others?
It may well be yes. After more searching I found a similar thread here:
http://discussions.apple.com/thread.jspa?messageID=7638343�
It may well be something as simple as Apple changing the default background colour for dialog boxes slightly. What puzzles me about that explanation is that the 'effect' occurs in iTunes 7.7 which was released just weeks ago - whereas Leopard's been out in the wild since last October. -
Updating PCR Adobe Forms to Layout Type ZCI
I came across OSS Note: 956074 and am trying to determine if the PCR Adobe Forms we are using need to be update to layout type ZCI.
When I execute the program in SA38: FP_CHK_REPORT and provide ISR_FORM_SPSE as the form I am getting a logon box to AdobeDocumentServices/Config. I provide the ADSUser ID and Password that has been created. After attempting to logon three times, I received the following error message.
ADS: SOAP Framework error: SOAP Runtime Exception: CSoa(ADS)
Does anyone have suggestions for troubleshooting this error message?
Thanks,
AshleyNo the password for ADSUser has not expired and the setting is checked so that it won't expire and does not have to be changed.
I do realize that all the forms need to be updated. When I try to manually change the layout type to ZCI for each form through SFP I am not able to reactivate the forms. When I click the activate button I get the same logon box as when I run FP_CHK_REPORT. I provide the ADSUser ID and Password that has been created. After attempting to logon three times, I received the following error message.
ADS: SOAP Framework error: SOAP Runtime Exception: CSoa(ADS) -
Hi Team,
I am only sending you an email as I am unable to find the answer to this question anywhere on your web site.
Just started within the past half an hour, I have been getting an update Flash Player dialog box popping up on my desktop, saying to update now or later or not at all, but I don't recognize it as the standard type of update dialog box that is sent by Adobe. The file name that is being used to click on for the update is "tmp4E11.exe:, is this a genuine Adobe update. I just can't stop this dialog box from popping up every ten seconds. HELP please.
Thanks.Hi,
if it's popping up every 10 seconds or so it's not official Flash Player update as ours does not display that often. Can you post a screenshot of it, How to post a screenshot in the forum.
Maria -
Faint Boxes Around Buttons in Dialog Boxes
Sorry if this is answered elsewhere, but the discussion search seems to be deactivated.
When dialog boxes appear in any application, there is a faint lighter gray box around the UI elements like buttons and text. Not impacting performance, but it's just driving me nuts.
Any ideas? Thanks!I am also experiencing this issue:
http://discussions.apple.com/message.jspa?messageID=7810218#7810218
Orangekay:
You make an interesting point about Carbon/Cocoa apps and perhaps a subtle change in background colour on the dialog boxes being responsible.
I have experienced this on iTunes 7.7 (released early-July) - see http://www.flickr.com/photos/jammylammy/2738394376 but it doesn't appear on Safari - see http://www.flickr.com/photos/jammylammy/2735078907.
I wonder if the Safari team (within Apple) knew about the change but the iTunes team didn't... -
On many computers in our environment we have issues in Windows 7 when using the Common Dialog Box. Within the dialog box we get the error Access Denied whenever we try to create a folder. If we try to rename a file it doesn't give an error but
it doesn't work either. We cannot delete a file, still no error, but we can create shortcut.
Within Windows Explorer of the same user it has no issues.
Even if we run an application as administrator it has the same results.
Example: Open Paint (right click "Run As Administrator"); then File, "Save As", right-click in empty space; then New, Folder. This caused the error to popup "Unable to create the folder 'New folder' Access is denied."
Thanks for your help,
DanielHi Daniel,
How are things going? As the article provided above said, for such kind of issues generally it is caused by permission settings.
The article provided several possible solution and please let us know if there is anything unclear about the steps.
If you have any feedback on our support, please send to [email protected] -
How to display a screen as Popup Dialog box in Module Pool
Hi All,
I have a requirement to display a popup dialoge box into module pool.
i need to display a screen as a popup on the current screen on a button click.I have developed a screen and in atribute tab i have defined the screen type as modal dialog box but it is displaying previous screen screen is hide i want to display on the same screen as a popup.
Thanks
NarendraHi Narendra,
Try to trigger the popup once it is done with the previous action might be anything.
i have shown one sample code where after i click on save button when the data is saved successfully
after that it has to trigger me a popup asking for conformation for the next action.
A small piece of code
INSERT INTO ZORMD1 VALUES WA_ZORMD1.
IF SY-SUBRC = 0.
G_LOCAL1 = 0.
MESSAGE S000. " Data saved successfully and immediately call the popup
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
EXPORTING
DEFAULTOPTION = 'Y'
TEXTLINE1 = 'SUCCESSFULLY SAVED'
TITEL = 'POPUP FOR conformation'
START_COLUMN = 25
START_ROW = 10
CANCEL_DISPLAY = 'X'
IMPORTING
ANSWER = G_PRINT
IF G_PRINT = 'J'.
PERFORM PRINT_OUT.
ENDIF.
Do the modification according to your requirement.
Cheers!!
VEnk@
Maybe you are looking for
-
Cannot delete voice memos from iphone
Ive been trying to delete the voice memos from my iphone (using the normal way - but each time I do they reappear after syncing with my MacBook Pro. Ive even tried emptying voice memos playlist on iTunes of computer, but when I sync they appear again
-
Show Subreport Name in the header part of the main Report subreport wise
Hi, I want to create a Report which contains a collection of Subreport. In header part of the main report I have one expression which shows specific text for specific subreport. In Detail I have three subreport named as Sureport1 Subreport2 Subreport
-
UTF-8 characters not displaying in IE6
Dear Sirs, I have an issue in displaying UTF-8 characters in Internet explorer 6. I set up my all jsp pages encoding as UTF-8. Any language characters(like chinese,tamil etc) perfectly dispaying in firebox browser. But in internet explorer, the chara
-
Export 500gb database size to a 100gb file system space in oracle 10g
Hi All, Please let me the know the procedure to export 500gb database to a 100gb file system space. Please let me know the procedure.
-
Iview Isolation Method property
Hi, The page contains 6 iviews, I created new iview and assigned to this page if refresh this iview complete page refreshing, I dont want this complete page refreshing only iview should refresh, for this reason I set isolation method property of ivi