Change system account to username?

HI,
I have created out-of-box workflow ,in the version history the modifiedby column showing as system account instead of username.
so want to display actual username instead of system account.
help is appreciated.
Thanks.

Hi,
You can check it from
central administration > operations > security configuration > service accounts > credential management > web application pool and you can also change the account. But you’d better use the account which has same
permissions with your current account, or you will encounter more other issues.
Besides, if it is not application pool account, please go to
Central Administration > Application Management > Policy for Web Application.
Then select your web app and if you find your account in the list, click it. In the Edit Users page, clear the
Account operates as System checkbox. That should fix this particular problem.
Hope it is helpful!
Seven

Similar Messages

A friend's eMac was working fine until the name of the administrator was changed incorrectly in Systems Accounts

I am trying to fix a friend’s eMac. It was working fine until the name of the administrator was changed incorrectly in Systems Accounts. Upon restart the computer failed to mount. I tried to reinstall Tiger and could not. The destination to do this install could not be found. While in Disk Utilities I tried to repair and then zero out erase the hard drive, this also could not be successfully done. The hard drive was working perfectly before the name change. I may try to load Tiger from the eMac onto an external drive and then hope to erase the eMac internal drive.
Thank you for your thoughts on this as it would be a shame to retire this trusted computer.
Nick M.

Hello,
Thank you very much for your attention to this. Yesterday I was able to get the eMac to install Leopard onto an external drive. I had hoped that once done I would be able to initialize or erase the content of the internal drive in Disk Utility, but was not able to do so, I only received error messages telling me my request failed. This was also true when I tried to create partitions on it. So in effect, the computer runs, but only from the external drive. I could not even find the internal drive while running from the external drive. Where is it? And the internal drive only occasionally shows up in Disk Utility.
As for holding Option and Alt, the internal drive did not show up.
And Leopard was running on the eMac when I lost contact with it. Again, all failed when a name of the administrator was changed, but was not properly done. Or something like this.
Is there anyway I can use Terminal to help reach the internal drive?
I realize I am asking a lot of questions.
And I thank you for your time,
Nick M.

Ifweb60 processes run as local system account on w2k- how do i change?

i am running forms 6i on an 2000 box using
the forms servlet config and oc4j with 9ias.
this runs fine except that the ifweb60 processes
are owned by the local system account. this in
turn means i can't map the forms60_path to a
network drive because i can't give network
privileges to a local system account. so,
how do i change the account that spawns the
ifweb60 processes?
thanks,
marta

Never mind, resolved this myself by using the netbios name to substitute the value I need on each individual domain.
$domain = Get-ADDomain | Select-Object -expandproperty netbiosname
Set-Location "dc=$domain,dc=dom,dc=co,dc=uk'
Sets location as:
PS AD:\dc=a,dc=dom,dc=co,dc=uk>
ON another domain same script results
PS AD:\dc=b,dc=dom,dc=co,dc=uk>
Exactly what I needed!

Changing OOTB "xelsysadm" system account ID

Hi,
My client requests the OOTB system account "xelsysadm" to be changed to another value (the reason being that "xelsysadm" is a well known string, and that the account may therefore be compromised). Anyway, is this even possible? If yes, how?
Thanks !

OIM 11g console does not allow changing "xelsysadm" ID, but I know it can be changed using the OIM 10g APIs. You may also change it directly in the USR table.
Your next question may be - will it impact anything? Per my knowledge, you will have to change any other external client that uses "xelsysadm" ID. Other than that, I don't think this ID is hard-coded anywhere within OIM server.
Gurus, please share your insights on this...

User account changes to system account

I created a few pages and approved them. When I goto View All Site Content>>Pages
I see that "Modified by" column shows "System Account" instead of my user id.
Any one had this problem ?

Hi,
You've probably used your account as a system account for SharePoint, when you installed it. SharePoint automatically changes the name of the system account to 'System Account', instead of DOMAIN\Administrator or something like that.
So, it's by design. You can fix it by changing the system account to another account in SharePoint.
- Mart

Account Name field of 4663,4660 displays System Account(FileServer$) instead of userName when Deleting a Folder

Account Name field of 4663,4660 displays System Account(FileServer$)
instead of userName when Deleting a Folder :
A Folder with files & subfolders are deleted.The following sequence events 4656,4663,4660,4658 are logged for parent folder,subfolders
and files in the security event log.For parent folder and subfolders events, the Account Name field of event id 4656 displays the user who deleted the folder,but the Account Name field of event id 4663,4660 diplays the SYSTEM account ie)FileServer Name instead
of username.This is not occuring for files inside the subfolders
Actually we correlate 4663,4660 with handle id and process id to make sure the file/ folder is deleted.Using this above correlation we
can not able to find out user ,because it shows servername$ for folder deletions not files.So my question is why windows logging servername$ in 4663,4660 events only for folder deletions.
The above issue happening only for
* parent folder and sub folders and not for files inside them.
* deletion through network share and not locally.
Sample Events of 4656,4663,4660
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 11-09-2012 20:03:41
Event ID: 4656
Task Category: File System
Level: Information
Keywords: Audit Success
User: N/A
Computer: FS01.test.com
Description:
A handle to an object was requested.
Subject:
Security ID: S-1-5-21-34352134455-267854504-159913591-49381
Account Name: vijay
Account Domain: test.com
Logon ID: 0x7e95119f
Object:
Object Server: Security
Object Type: File
Object Name: \Device\HarddiskVolume4\ShareA\testFolder
Handle ID: 0x7498
Process Information:
Process ID: 0x4
Process Name:
Access Request Information:
Transaction ID: {00000000-0000-0000-0000-000000000000}
Accesses: DELETE
Access Mask: 0x10000
Privileges Used for Access Check: -
Restricted SID Count: 0
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 11-09-2012 20:03:41
Event ID: 4663
Task Category: File System
Level: Information
Keywords: Audit Success
User: N/A
Computer: FS01.test.com
Description:
An attempt was made to access an object.
Subject:
Security ID: SYSTEM
Account Name: FS01$
Account Domain: test.com
Logon ID: 0x3e7
Object:
Object Server: Security
Object Type: File
Object Name: \Device\HarddiskVolume4\Shared\testFolder
Handle ID: 0x7498
Process Information:
Process ID: 0x4
Process Name:
Access Request Information:
Accesses: DELETE
Access Mask: 0x10000
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 11-09-2012 20:03:41
Event ID: 4660
Task Category: File System
Level: Information
Keywords: Audit Success
User: N/A
Computer: FS01
Description:
An object was deleted.
Subject:
Security ID: SYSTEM
Account Name: FS01$
Account Domain: test.com
Logon ID: 0x3e7
Object:
Object Server: Security
Handle ID: 0x7498
Process Information:
Process ID: 0x4
Process Name:
Transaction ID: {00000000-0000-0000-0000-000000000000}

HI,
When you configure the Auditing Entry for the user account on the shared folder, if the setting is Files only, it might be the cause of your problem . If so, you can try to configure "Apply onto" as The folder, subfolders and files.
Best regards, Jason Mei Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

My iPod touch is not connecting to iCloud account, under iCloud settings has old email account and username that I have since updated and are working correctly on my iPad, any idea how I can reset this?

My iPod touch is not connecting to my iCloud account, under iCloud settings it has my old email account and username that I have since updated and are working correctly on my iPad, any idea how I can reset this on the iPod or otherwise? This old account info keeps coming back on my iPod and messing up access to my apple account and now the icloud. last time a system restore needed to be done to fix it....

It won't give me the option to sign out of the old account, it's that light grey color that you can't click on. And since it has the old email address that it's telling me to go into to verify the account, I can't actually change it... I'm stuck

Change Administrator account name

I stupidly (now it seems) used the name of my preferred user account whilst setting up snow leopard server.
Now I want to add this user account name as a 'reguler' user in the workgroup manager but of course the system refuses as it says the name conflicts with an already created account.
However I cannot see this account in either the workgroup administrator application or the system's account manager (from the system preferences panel).
I have changed the name in the system account manager from the unwanted name to 'administrator' but it still seems to have the old name 'trapped' in the system
Any ideas as to how I can free up this old name?

Hi,
Join the club ! I did exactly the same thing. I do know of a bit of a 'hack' to change the username, which I did try myself on my server, but to be honest I found other things started going a bit strange once I did so I ended up doing a clean re-install.
Mark

OIM 9.1 DB Recon Changes Locked Account status in OIM back to Provisioned

Hi,
I have a scheduled task that runs the OIM DBAccessReconTask but am seeing some unexpected behavior. Here are the steps to produce the error:
1. Provision a DB account to a user in OIM (this creates an account in the target database and the account shows in the user's resource profile with a status of "Provisioned")
2. Disable the DB account in OIM from the User's Resource profile screen (this successfully disables the account in the database and changes the account status to "Disabled")
3. Run the DBAccessReconTask
4. After the DBAccessRecon task completes the status of the DB account in the database is still disabled but in OIM on the user's resource profile screen it is marked as "Provisioned"
I did not expect this to be changed to provisioned in OIM since it is disabled in the database. Has anyone seen similar issues when running the DBAccessReconTask or know a way to fix this?

Hi Suren,
Thanks for the reply. Originally I thought your solution would work but after analyzing it closer there is a more fundamental problem we are having with the DBReconTask. We only want the reconciliation to take place going from OIM to the database and not vice versa (i.e. changes to an account in OIM should be pushed to the database but not from the database to OIM). However, currently if a change is made in the database (a role is added, the profile is changed, etc...) and the DBReconTask is run then it will be updated in OIM. Do you know how this can be achieved? These are the properties we currently use when creating the task:
Properties props = new Properties();
props.put("Target System Login Recon - Resource Object name:", ro.getName());
props.put("Target System User Recon - Resource Object name:", ro.getName());
props.put("Trusted Source Recon - Resource Object name:", "Xellerate User");
props.put("Server", itResource.getName());
props.put("Record Size", "ALL");
props.put("isTrusted", "NO");
props.put("DBName", "nodata");
props.put("ExcludeSystemUsers", "nodata");
props.put("ReconcileLockedUser", "YES");
props.put("Login Name", "nodata");

I recently changed my Apple ID username and password and now get a message each time I open my iPad to enter my Apple ID to continue to receive downloads. However the message shows the old username for my Apple ID.

I recently changed my Email address which required me to change my username for my Apple ID and my password. The changed has been successful, but each time that I open my iPad, I get a message that I need to enter my Apple ID to continue to receive downloads. The problem is that the username that comes up for entry of the password is the OLD Apple ID username. I have entered the old password and then then I am directed that it is not correct and given advice to change my password or username. I can't figure out how to resolve this issue.

If you updated your existing account then try logging out of it on the iPad by tapping on the id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on the iPad.

Change customer Account Group

Hi Experts,
We have two different account groups with different number Ranges. When i try to change the customer account group from one to other through XD07 system given the following warning message.
Customer 600021 not in External Sold-to-Party
- number range 0000100001-0000199999
Message number F2691
We have tried to change this warning message in to Error message through OBMSG and OBA5
after that also system showing warning message.
Where we do mistake? is there any other process to do the changing message?

Hi,
If You are trying to change the account group of a customer whose partner function is Sold-to-party.
Changes to the account group and the relevent partner functions only made from lower level to higher level.
Example:
Sold-to-party cannot be assigned the function of a payer(Higher level to lower level) because you are trying to change the higher level partner function.
Your can assign sold-to-party function to a payer (Lower level to higher level) because you are trying to change lower level partner function.
Regards,
Krishna Kishore

How do I change icloud account on pc

I installed Icloud on a work PC using my personal icloud apple ID. Now I want to change the account to a new apple ID that I created specifically for my work phone and PC. Having trouble as every time I un-install from the pc and attempt to reinstall it brings up my personal apple ID. Help

Welcome to the Apple Community.
Firstly, you need to change your details with Apple, Start here, change your country if necessary and go to manage your account.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > store, scroll down and tap your ID)

How can I change the account name in iCloud. My email has changed and I want to change it on iCloud.

How can I change the account name in iCloud. My email has changed and I want to change it on iCloud.

To change your iCloud ID, go to Settings>iCloud, tap Delete Account, then sign back in with the new ID. This deletes the account and your iCloud data from your device, but not from iCloud. Provided you are signing back into the same account, your iCloud data will reappear on your device when you sign back in.
To avoid losing photo stream photos, save them to your camera roll (if not already there) before deleting the account. To do this, open your my photo stream album, tap Edit, tap the photos, tap Share, then tap Save to Camera Roll.
To change the ID on your Mac, go to System Preferences>iCloud, sign out, choose Delete for all the prompts (your data will still be in iCloud), then sign back in with the changed ID.

Requirement is to run CMD.EXE under the Local System Account. So that we can map a network drive to be used by a windows service, which will be created by command: - net use z: \\servername\sharedfolder /persistent:yes

Environment:
OS: Windows 7 32/64 bit, Windows 2008 Server 64
bit/ Windows 2012 Server 64 bit
Priority:
- Critical
Requirement: - Since
the Windows Service is running under the Local System Account, we would like to emulate this same behaviour.
Basically, we would like to run CMD.EXE under the Local System Account. So that we can map a network drive to be used by a service using following
command
net use z: \\servername\sharedfolder /persistent:yes.
Already Attempt:
We tried to launch the CMD.exe using the DOS Task Scheduler AT command. Here’s a sample command:
AT 10:36 /interactive cmd.exe
But I received a warning that “due
to security enhancements, this task will run at the time excepted but not interactively.”
It turns out that this approach will work for XP, 2000 and Server 2003 but due to session isolation
Interactive services no longer work on Windows 7, Windows Server 2008 and above.
2. We
tried to create a secondary Windows Service via the Service Control (sc.exe) which merely launches CMD.exe.
<Drive>:\sc create RunCMDAsLSA binpath= "cmd" type=own type=interact <Drive>:\sc
start RunCMDAsLSA
In this case the service fails to start and results it the following error message:
FAILED 1053: The service did not respond to the start or control request in a timely fashion.
3. One
suggestion, we found to launch CMD.exe via a Scheduled Task, but
it is not giving any option to launch CMD.exe in interactive mode; so that I can map network drive using net command.
4. I read an article, which
demonstrates the use of PSTools from SysInternals. I launched the command line and executed following command
psexec -i -s cmd.exe
PSTools worked fine, but It seems that in scope of Sysinternals Software License
Terms. You may not "use the software for commercial software hosting services."
Application will deploy on client, which will be like commercial,
so we are not able to use PSTools.
Kindly assist us for achieving the requirement. We have tried all the ways, but nothing is working for us. Kindly suggest.
I will be really thankful.

Hi Sir,
Nothing worked from above for us. You can see our remarks on posted query.
That’s why, we posted on forum.
And there will not be any vulnerability, because, if we will use "net
use ..."
in network domain; definitely,
we will provide username and password of mapped drive system.
And, that system, itself is given by client; so that, there must not be any vulnerability; they are ready to provide user name and password.
We need a way; by which we can complete the requirement. Kindly assist.
Regards,
S. P. Singh

Cannot Retrieve referenced URL in wscript file from Local System Account, but not other accounts on the computer.

Hello,
I have a WScript File that includes an external resource (js file).
It works on one computer and it does not work on another computer.
If I run this file from a normal admin command prompt everything runs fine on both computers.
If I run this file from the Local System account using PsExec it runs fine on one of the computers and throws an error "Cannot Retrieve referenced URL" on the other computer.
The reason I want it to run from the Local System account is that it is executed from a Windows Service.
Is there some setting or some way for the IE cache to get corrupt on the Local System account or something like that?

JRV,
You are by far the worst 'support' person I've ever seen. If you aren't going to be thoughtful in providing support, don't pretend. If you're going to pretend, leave your condescension on the shelf. You have provided no thoughtfulness whatsoever to his issue,
and have in no way improved the discourse. You are arrogant and condescending without exhibiting any intelligence whatsoever. I'm impressed Matt kept calm through your demeaning, counterproductive diatribes.
Matt,
First I'd check UAC settings, because I believe that can change how elevation works substantially.
Second, I would check the versions of wscript.exe on both machines, both in System32 and SysWow, and I'd check for updates bypassing WSUS to make sure there's not something silly going on there (totally a shot in the dark, catch-all theory).
Have you made any headway in the last few weeks?
-John
This is not a support forum and it is not for assistance in fixing broken configurations. It is a scripting forum. The OP proved that the issue is not the script but the environment it is running in. You should not get mad just because you are
not getting satisfaction.
¯\_(ツ)_/¯

Change system account to username?

Similar Messages

Maybe you are looking for