Change table size and headers in type def cluster

Is is possible to change a table size and headers that is inside a type def cluster?
I have a vi that loads test parameters from a csv file. The original program used an AC load so there was a column for power factor. I now have to convert this same program to be used with a DC load, so there is no power factor column.
I have modified to vi to adjust the "test table" dynamically based on the input file. But the "test table" in the cluster does not update it's size or column headers.
The "test table" in the cluster is used through out the main program to set the values for each test step and display the current step by highlighting the row.
Attachments:
Load Test Parms.JPG ‏199 KB
Table Cluster.JPG ‏122 KB

Nevermind, I figured it out...
I was doing it wrong from the start, in an effort to save time writing the original program I simply copied the "test table" to by type def cluster.  This worked but was not really as universal as I thought it would be, as the table was now engraved in stone since the cluster is a type def.
I should not have done that, but rather used an array in the cluster and only used the table in the top level VI where it's displayed on the screen.

Similar Messages

  • In SAP 4.6c In classical reports output how to change Font size and Font type

    Dear Experts,
    In SAP 4.6c, in classical and interactive reports  output how to change font size and font type.
    Regards,
    Zaker.

    These are HTML formatting questions. Nothing to do with the Oracle SQL and PL/SQL languages.
    With old-style HTML, the font size and family are set using the font tag.
    With modern style HTML, that is done using cascading style sheets (CSS).
    Your favourite search engine will turn up tons of information on both.

  • How can I change the numeric and enum default values in a Strict Type Def Cluster?

    I have a Strict Type Def cluster that contains 10 Numerical controls and a number of enums.  I have edited default values of the numerical controls in the Strict Type Def, in customize mode, performed a "Make Current Values Default"  and have done a "Apply Changes"  and saved.
    This cluster is used in various locations throughout the project and have not found a way to make the cluster default values change downstream.  The Strict Type Def (STD) Control appears to have the right values on the front panel.  But if I place an instance of this on a blank front panel, and run a wire from it in the block diagram with a probe and indicator, I still get the old default values being passed from the STD.  
    Solved!
    Go to Solution.

    There Are No Strict Type Definition Constants
    "Even though typedefs only update when types change, instances get cosmetic changes from the definition whenever they update. So one trick to "push" changes to typedef instances is to change the data type, apply changes, and then change the data type back. [edit, March 26 - Note that the typedef instances need to be in memory when you use this trick]."
    From Eyes on VIs, here.
    http://blog.eyesonvis.com/
    I love this article.
    Jim
    You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

  • Ability to change font size and font color thru console

    I have a console that a client can pretty much do all the
    changes they
    want.. now they want to be able to change the font sizes for
    certain titles
    and also the color..
    Since 95% of the site is controlled with CSS is there
    something i can add
    to the console page to allow them to change the size and
    color of the titles
    and text?
    ASP, SQL2005, DW8 VBScript

    Here's what I have done in the past. Maybe not elegant, but
    it works. (I
    use PHP, but I'm sure you can modify for ASP.)
    In the HEAD of each web page, include regular old embedded
    STYLE tags,
    but INCLUDE an external PHP file:
    <head>
    <style type="text/css">
    <?php include('styles/testcss.php'); ?>
    </style>
    </head>
    Now in that included PHP file, just have CSS code which pulls
    in your
    dynamic data. Here's an example snippet:
    body {
    color: #600;
    background-color: <?php echo
    $row_recordset['bgcolor'];?>
    Of course, you'll need the code for the recordset somewhere
    too.
    Alec
    Adobe Community Expert

  • A mode to change font size and bold in every page?

    Due to problems described here https://support.mozilla.org/en-US/questions/1012057?esab=a&s=&r=0&as=s I have clear that I need something (an extension, maybe) that allow me to recognize and change font size and bold of the fonts in every page.
    Does exist something like this?
    Maybe also for bookmarks toolbar...

    Hi RichterB,
    You can change this in the Content Settings of Firefox. Go to "3 bar" menu and click on Options. Click on content and uncheck "Let websites choose their own styles" and select a bold font type.
    Also try [https://addons.mozilla.org/en-US/firefox/addon/stylish/ Sytlish].

  • How can I set the CS5 to Intuos Pro Large for changing brush size and opacity and others?

    How can I set together  to  my PS5 or Ps6 in order to change brush size and opacity at the Intuos Pro Large?
    Nachricht geändert durch Orhan Tarman

    The MTU setting on the interface is the layer 3 packet size. In this case, the MTU is set to 1500, but the largest frame size transmitted on the interface (including layer 2 headers) is 1516. It sounds like you are experiencing another problem at the LES.

  • How to change font size and style in keynote for ios

    How to change font size and style in keynote for ios

    Same situation for report parameter input value font. What ever we do , it is still Arial and size 10.

  • I want to change the size and color of text in call out boxes and text boxes. How can I do this? Jack

    I want to change the size and color of text in call out boxes and text boxes. How can I do this? Jack

    Highlite the text inside the text box and then press Ctrl+E.

  • How to change print size and DPI setting in Aperture

    If I import a raw image from my camera (D2X) to Aperture and print the image at about 8"x10" through Aperture, it prints at about 300 DPI, if I change to size of the same image to 12"x18", in Aperture, it prints the image at about 166 DPI. I do not believe there is a way to change this in Aperture.
    My question is, can I open the image at 8"x10" in PS, change the size and resolution to 12"x18" and 300 DPI then save it, open it again in Aperture and print it. If I do these things, will the image printed in Aperture still be 300 DPI and how can I check it to see if that is the case?
    I have not been able to find the DPI setting anywhere in Aperture to confirm that it is what I want or need.

    "You can make the pixels bigger by making the image larger but you can't add any more pixels without running some kind of interpolation filtration like GenuineFractals or a recomputation like bicubic."
    Thank you for your explanation and that brings me exactly to the point of my question.
    Can I interpolate my original NEF raw image after conversion by Aperture to a much larger image for print using something similar to what Photoshop does with it's bicubic smoother or as is done in genuine fractals or must I go out of Aperture and back if I want to print with Aperture. I am hoping you will tell me that Aperture is or will be capable of interpolating an image to a larger one with more than just the pixels supplied by the camera. I do not belive that these are not enough by themselves to print a quality image in a much larger size.
    I may be wrong, but I believe that it is somewhat common practice to interpolate an image to get a greater resolution printed image at a size larger that what is possible with a resolution provided by the (D2x in my case) DSLR camera.
    Or is this just a tempest in a teapot. In other words, will I be able to take the image out of the D2x (12.5 megapixels) and print a 13x 19" image with the same quality in Aperture (uninterpolated but enlarged) as an interpolated image in PS or Genuine Fractals and then in PS?
    Thank you

  • Change the size and style of the menu

    How can I change the size and font on the automatically created menu in iWeb?
    I cannot select it like other text on the site..

    The words under pictures on the photo pages are also part of the template. What you see is the default.
    But you can change this. You can change the font, font size and font color. Just hightlight it by dragging the cursor over it and select font to change the font and size. And you can use the color wheel to change the color
    Good luck!
    Edit: if you choose a large font you may have to adjust the space between the pictures. This can be done in the inspector. Just play with it to see what works.

  • My mac says that it has 40 gb of movies on it but when i finder search for file size, and for file type it gives me no videos

    My mac says that it has 40 gb of movies on it but when i finder search for file size, and for file type it gives me no videos or movies. I have called apple 3 times and each time they do the same thing and then do something that takes awhile to finish so we hang up and then it never works.
    Please Help

    each time they do the same thing
    And what thing might that be?

  • How do i change font sizes and colors in ical in OS Lion.  Everything is greyed and too small.   And how do I changed the color of the scroll bars, which are now invisible?

    how do i change font sizes and colors in ical in OS Lion. Since upgrading,  all fonts are grey, instead of black,  and too small.   And how do I changed the color of the scroll bars, which also are grey and almost invisible?  And if you can asnwer this, can you tell me how to get back the email format I had before the upgrade?  I no longer have column headings and I'd like them.  Thank you. 

    Do you know about changing the font colors for ical, and the color of the scroll bars?
    No, I don't. I don't use that program; I fiddled with it just now, and could not find a way to do that.
    Perhaps someone else will have an idea.

  • Hello ! how to change document sizes and use our own size (not A3, A2 ...) thank you !

    hello ! how to change document sizes and use our own size (not A3, A2 ...) thank you !

    Experiment. No harm in trying.
    If you are just starting to use Pages you need to make your own assessment given current events whether committing your work to a format and software given this support is a wise move.
    You also need to look at what will produce workable results. Particularly if your large posters are to be commercially printed and contain large bitmap (photographic) images.
    Always work backwards from your output. Ask your printer what they require to do their job.
    Peter

  • [svn:osmf:] 14306: PARB changes: Merge seekBegin and seekEnd event types into a single seekingChange event type .

    Revision: 14306
    Revision: 14306
    Author:   [email protected]
    Date:     2010-02-21 10:48:21 -0800 (Sun, 21 Feb 2010)
    Log Message:
    PARB changes: Merge seekBegin and seekEnd event types into a single seekingChange event type.  Add seeking as a getter to the SeekEvent class.  Update test code and samples accordingly.
    Modified Paths:
        osmf/trunk/apps/samples/framework/CuePointSample/src/CuePointSample.mxml
        osmf/trunk/apps/samples/framework/DynamicStreamingSample/src/DynamicStreamingSample.mxml
        osmf/trunk/apps/samples/plugins/AkamaiPluginSample/src/AkamaiPluginSample.mxml
        osmf/trunk/apps/samples/plugins/CaptioningSample/src/CaptioningSample.mxml
        osmf/trunk/framework/OSMF/.flexLibProperties
        osmf/trunk/framework/OSMF/org/osmf/elements/DurationElement.as
        osmf/trunk/framework/OSMF/org/osmf/elements/ListenerProxyElement.as
        osmf/trunk/framework/OSMF/org/osmf/elements/compositeClasses/CompositeSeekTrait.as
        osmf/trunk/framework/OSMF/org/osmf/elements/compositeClasses/ParallelSeekTrait.as
        osmf/trunk/framework/OSMF/org/osmf/events/MediaErrorEvent.as
        osmf/trunk/framework/OSMF/org/osmf/events/SeekEvent.as
        osmf/trunk/framework/OSMF/org/osmf/media/MediaPlayer.as
        osmf/trunk/framework/OSMF/org/osmf/metadata/TemporalFacet.as
        osmf/trunk/framework/OSMF/org/osmf/traits/SeekTrait.as
        osmf/trunk/framework/OSMF/org/osmf/utils/TraitEventDispatcher.as
        osmf/trunk/framework/OSMFTest/org/osmf/elements/TestDurationElement.as
        osmf/trunk/framework/OSMFTest/org/osmf/elements/TestParallelElementWithSeekTrait.as
        osmf/trunk/framework/OSMFTest/org/osmf/elements/audioClasses/TestAudioSeekTrait.as
        osmf/trunk/framework/OSMFTest/org/osmf/media/TestMediaPlayer.as
        osmf/trunk/framework/OSMFTest/org/osmf/traits/TestSeekTrait.as
        osmf/trunk/framework/OSMFTest/org/osmf/utils/DynamicSeekTrait.as
        osmf/trunk/framework/OSMFTest/org/osmf/utils/TestTraitEventDispatcher.as
        osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/widgets/RecordButton.as
        osmf/trunk/plugins/CaptioningPluginTest/src/CaptioningPluginTest.mxml
        osmf/trunk/plugins/MASTPlugin/org/osmf/mast/adapter/MASTAdapter.as
        osmf/trunk/plugins/MASTPlugin/org/osmf/mast/managers/MASTConditionManager.as

    ls -l /var/run/lighttpd/
    And how are you spawning the php instances? I don't see that in the daemons array anywhere.
    EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
    You will note that with pre-spawned information, the config looks different[1].
    You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
    [1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change"

  • Difference between tables statement and by using type statement

    Hi all,
    I need to know the difference between the two of the below statements
    Tables spfli.
    and
    data spfli type spfli with header line.
    As far as i know both seem same to me.
    Thanks in advance,
    Bala.

    >
    Bala Shanmuga Priyan wrote:
    > Hi all,
    >
    > I need to know the difference between the two of the below statements
    >
    >
    Tables spfli.
    this will create a work area (spfli), looks like DB table spfli, but the statement is obsolate
    Bala Shanmuga Priyan wrote:
    >
    data spfli type spfli with header line.
    this will result in a syntax error, because this would also create a work area, but they cannot have header lines, so you should leave the WITH HEADER LINE addition.
    To create work area use:
    DATA : gw_spfli TYPE spfli.
    To create internal table:
    DATA : gt_spfli TYPE TABLE OF spfli.

Maybe you are looking for