Change the export file format

Hello,
I got a request that i need do the following changes for the existing FDM location.
1. Change the export file column order. e.g
Before: a,b,c,d
After: b,d,a,c
2. Remove the header of the export file. e.g
Before: Entity Product Account
"NA" "NewProduct1" "100"
After: "NA" "NewProduct1" "100"
I can not change the calc order in the adapter since many FDM locations are using the same adapter. And many FDM locations are using the same export action script.
Do you have any idea how can i do this ?
Thanks,

It doesn't matter which adapter you are using that approach will work. Any custom modification of the output column order which overrides the calc sequence can be done in the Export Action script. Be aware though that any changes to Action script will affect your support agreement with Oracle if you have one. Therfore it may be best to put any custom output in the AftExport event script.

Similar Messages

Can we change the default file format 'BIN' of system to 'ASC' using table

can we change the default file format u2018BINu2019 of system to u2018ASCu2019 using table TSOPE
if possible:will it affect any system performance

Hello Vincent,
BIN(Binary) is default selection.and so we have to select ascii.to make myself more clear my queries is like:
first for setting ascii what we need to enter in text box that is against ASCII.and
secondly if we select ASCII will it affect system performance in anyways.

How can I change the default file format in PSE 10?

I just upgraded from PSE 6 to PSE 10. In the former, the default file format when saving an edited image in the editor was psd. In 10, it is jpg. I prefer to save in psd, which means I have to select psd from the format drop-down menu for each save. I've looked for a way to change the default but can't find one. Is there a way?

Ah, I see that you're right -- editing that doesn't require adding a layer defaults to saving as the original image's file type. Adding a layer causes the default "Save As" file type to switch to PSD.
I don't know of any way to change that.
Ken

How do I change the default file format for saving files in Preview

I often take screen clips and save them as files to my desktop, then upload them to my website or include them in emails. The default file format for Preview seems to be TIFF, but I'd prefer jpg. How do I convince Preview to use jpg as the default file format?
TIA,
Thad

I should have been a little clearer...
If I'm emailing a screen-clip, I can just paste it right into the email, but I post on a lot of discussion boards and it's often nice to be able to include a screen shot in those. My preferred way to do that is to post the clip at my personal website and then put a link in the post. It gives me the ability to delete the image whenever I want (a plus for any security freak) and it works on every discussion board I know. Some boards allow attachments, some don't. Plus I don't want to have to remember different d/b file attachment procedures. Anyway, when I make a screen-clip, I need to temporarily save it (usually to my desktop), then ftp it to my website. I use Preview to do that. It's simple. But I'd like it to default to .jpg instead of .png or .tiff. (FWIW, I just tried it and the default was .png, but I swear I did something similar earlier that defaulted to .tiff when I first tried to save the newly-created file).

How do i change the webpage file format when saving a webpage?

whenever i try to save a webpage it automatically does so using a chrome html format. windows does not recognize this format. how do i change it? thanks

I'm not sure what you mean by a "chrome html format."
I save pages all the time with Firefox 3.6.16 (and now 3.6.17) and have no problems.
When you select Save Page As, it opens a dialog window so that you can indicate where the page is to be saved.
In the Save as Type dropdown list are format options - "Web page, Complete", "Web Page, HTML only", and "text files"
If you select Web Page, Complete, Firefox saves the HTML file and creates a folder where it stores all the other files associated with the page. If you then open the HTML file, it should display properly in Firefox (or any other browser).,
If you select Web Page, HTML only, Firefox saves only the HTML file, no other files are saved.
If you select text files, Firefox saves only the text, it does not save any of the HTML. Basically, you get what you can see on the page without any of the formatting.
I've never seen an option, in Firefox 3, to save a file as a "chrome html format."
I've only see what I described above.
One other thing, I suggest you upgrade to Firefox 3.6.17. At 3.6.10 you are quite a way back and have missed some security updates.
I don't think you can use the update link under the Help menu, you may have to go to the Firefox site and download it manually. It would not hurt to look for some instructions as to how to go from 3.6.10 to 3.6.17.
Stan

Why is H.264 not on the "export" file format list?

In QuickTime Help it says, "Video Format: Choose the video compressor (codec) you want to use to compress your video. For the highest quality at the lowest data rate (or the smallest file), H.264 is recommended." However, H.264 is not in the pop-up menu of formats, although the help file appears to say that it is. So how does one compress a .mov file to H/264 format?

Here:
http://babelfish.altavista.com/babelfish/trurlpagecontent?lp=fren&trurl=http%3a%2f%2fwww.qtbridge.com%2fQTCodecs.html
It's being translated from French so it may take a few secs to load.

Export file format

Hi All,
I want to export data in column format using calculation script. Currently Account, Period and scenario is dense and others are sparse in my essbase database. I am exporting data for actual scenario, multiple accounts and level zero periods. In the export file essbase automatically setting level zero period (Week 1 to week 53) in column header and other 2 dimension in row. I want to change the export file format using calculation. I want scenario to be column header and other all dimension to be in row. Is there any way I can specify the export file format. I used all the export setting but nothing is working.
Your response will be appreciated.
Thanks,

If scenario is dense and you are using the DATAEXPORT calc command try
SET DATAEXPORTOPTIONS {DATAEXPORTCOLHEADER Scenario;};
Cheers
John
http://john-goodwin.blogspot.com/

Changing the export format order

Hi all,
I want to change the order of columns in the exported file in FDM as per my requirements. How can I change the order of colums in the exported file ? Please help me in this.
Thank you !

Take a look in the Export Action script of whatever adapter you are using. This is where the output format is defined.
Forgot to mention if you are using the Essbase adapter you can do this via setting the calc sequence for each dimension which will determine the order it is displayed in the output file. This can be set in the workbench or web client
Edited by: SH on Oct 18, 2011 9:43 AM

Good day! On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09 When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Un

Good day!
On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09
When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Unable to process the document in the module Save As. File not created"

Hi,
Was it working fine for you before?
Is it with some specific documents?
Are you able to convert the word/excel files to pdf?
Regards,
Rave

Good day!   On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09 When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Una

Good day!
On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09
When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Unable to process the document in the module Save As. File not created"

This happens with any file .
Send a file with the screen errors and system data . Also send a couple of files PDF.
Translates only txt format.
Acrobat установлен: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:43:46
Браузер по умолчанию:
Версия BIOS: _ASUS_ - 1072009
Версия ОС: 6.2.9200
Всего виртуальной памяти: 4194176 KB
Всего физической памяти: 4077252 KB
Графическая плата: Intel(R) HD Graphics 4000
    Версия: 10.18.10.3412
    Отметить: Не поддерживается
Доступная виртуальная память: 3638168 KB
Доступная физическая память: 1689940 KB
Имя пользователя: Vazgen
Имя системы: VAZGENTAICHI
Монитор:
    Название: Intel(R) HD Graphics 4000
    Разрешение: 1920 x 1080 x 60
    Бит на пиксел: 32
Название ОС: Microsoft Windows Vista
Папка Windows: C:\WINDOWS
Папка для временных файлов: C:\Users\Vazgen\AppData\Local\Temp\
Почтовая программа по умолчанию: Microsoft Outlook
    mapi32.dll
    Версия: 1.0.2536.0 (winblue_rtm.130821-1623)
Производитель ОС: Microsoft Corporation
Процессор: Intel64 Family 6 Model 58 Stepping 9 GenuineIntel ~1696 Mhz
Сведения о Windows:
   Планшетный ПК: Да
   Начальная версия: Нет
   Media Center Edition: Нет
   Медленный компьютер: Нет
Сведения о сеансе:
   Тип загрузки: Обычный
   Завершение работы: Нет
   Сеть: Доступно
   Внутри Citrix: Нет
   Внутри VMWare: Нет
   Удаленный сеанс: Нет
   Удаленное управление: Нет
   Использование JAWS: Нет
   Использование Windows-Eyes: Нет
   Использование NVDA: Нет
Сведения об Acrobat:
   Изолирование программной среды: Отключить
   Связанная программа для чтения: Нет
   Multi-Reader с поддержкой Desktop: Отключить
Сведения об отображении:
   Ширина экрана: 1920
   Высота экрана: 1080
   Число мониторов: 2
   Число кнопок мыши: 2
   Мышь с колесом прокрутки: Нет
   С маркером Windows: Нет
   Двухбайтовая кодировка: Нет
   С редактором метода ввода: Да
   В программе для чтения с экрана: Нет
Сведения об учетной записи:
   Права пользователя: Администратор
   Управление учетной записью пользователя: Ограниченное
   Целостность процесса: Не определено
   Тип профиля: Отсутствует
Установленные приложения:
   Версия Office: Office 2013 32-bit
Файл подкачки: 4194303 KB
Часовой пояс: Московское время (зима)
Язык: Русский (Россия)
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\Accessibility.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:20
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\Annots.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:22
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\IA32.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:18
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\PaperCapture.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:43:36
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\SaveAsRTF.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:20
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\SendMail.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:20
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\Updater.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:22

Is there a way to change the export default file name

I have a request to change the default file name when doing a pdf export of a report. By deault, when pushing the export to pdf button, the name is NONAME.pdf. They want the default name to be the channel name is displayed on the report.
Is there an easy way to do this, or will I have to load all new code into the export button?

What you'll probably want to do is create a script that uses the Call Report.Sheets.ExportToPDF function and programatically specify the name. From here, you could set it as one of the function buttons or even include it on the toolbar if you'd like.
Jesse S.
Applications Engineer
National Instruments

I just updated to 5.7 and the exported files are blurry. I compared the ones I exported before the change and they are fine. I have not change any settings.

I just updated to 5.7 and the exported files are blurry. I compared the ones I exported before the change and they are fine. I have not change any settings.

I don't understand your last paragraph.
"The home page also has a full bar ..." What does "full bar" mean? " ... instead of the tray it had before." What does "tray" mean?
Anyway, you might try Settings > General > Reset > Reset Home Screen Layout
I guess that cannot make things any worse.

Virus has changed all the office file format and cant open those file

Hello
Recently I attacked by some new virus which is changed my all the office document files and added a extra extension after the office file extension.If I manually change the infected file extension to orginal file format and try open it shows error message.
Although having System Center Endpoint Protection how could it would be the affected by the virus ?
Now please suggest me how to recover the those files to orginal file format or recover MS office file???
Thanks

Hi,
Anti-virus solutions are necessary to protect your system but it can never be a 100% secure.
Once Office files are damaged by the viruses, we can't guarantee the files can still be recovered.
Anyway, you can still try the "Open and Repair" feature in Word to repair the file.
Take Word 2013 for example, click FILE -> Open -> Browse to the file location -> Select the document -> Find the "Open" button, click the "Open and Repair" button from the drop list. Check if this can repair the document.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Recent changes to the class file format?

I have the JVM Spec, 2nd ed., on my desk. I'm trying to find out about changes to the class file format since its publication, i.e. what are the differences between class file versions 46.0, 47.0 and 48.0?
So far, searching the JDC and the web hasn't helped. Does a document describing the changes exist?

I have not found a list of changes, but the 2nd edition is at
http://java.sun.com/docs/books/vmspec/2nd-edition/html/ClassFile.doc.html
Clarifications and Amendments to The Java Language Specification at http://java.sun.com/docs/books/jls/clarify.html has a section
"Compilation of Symbolic References"
that is useful.
http://forum.java.sun.com/thread.jsp?forum=31&thread=27569
says:
javac v1.4 emits by default Java 1.2 compatible .class files while
all javac implementations since between 1.1.0 and 1.3.1 emit byte
default Java 1.1 .class files.
Check to see what effect using the -target option in javac to get
the two versions to produce Java 1.1, 1.2, or 1.3 .class files.
discusses using javac -target to generate
-Christopher

Export file formats from flash?

Hi, I have an issue concearning existing file formats for export in Flash CS4.
According to the user's manual in Italian I have found, http://help.adobe.com/it_IT/Flash/10.0_UsingFlash/WS0E26E472-1533-4297-A904-59476E8E1935.h tml
available formts include EPS and AI.
As far as AI is concearned, I have this option but exported AI files are hard to open in Illustrator, since a number of problems appear.
If I separate all groups in Flash and then export to AI format, Illustrator finally opens the AI file, but changing the colours and the shape of my design.
Moreover, no dialogue box for Illustrator version options appear when I choose AI for export, as is described in the support page.
As to EPS file format, it is not in the export file dialogue box, the formats I have are JPG, PNG, GIF, EMF, WMF, BMP.
My point is that I draw in Flash, then I need to export the designs in Illustrator for print optimization, but the content changes dramatically, if I actually can open the files.
Caould anyone help me?
Silvia

I am unsure about the Illustrator export, as I have never needed to do this, nor do I have CS4.
The EPS reads as a printer option, not an export one:
"An EPS file can be printed with a PostScript printer. ... This format has no definable export options"

Change the export file format

Similar Messages

Maybe you are looking for