AP cleared Item Report

Hi,
I am use SAP query to build a AP cleared Item report. The report is similar as we can get from FBL1n, but I need a column as group key, which can not be found in FBL1n report.
My questions is:
1. When using SAP query, I use table LFA1 and BSAK, everything is ok, except I could only get the uncleared Item in the table. Like for one item have both Credit and Debit, I could find them in my report. What shall I do?
The field used in the report:
Company Code: BSAK-BUKRS
Vendor Code: BSAK-LIFNR
Vendor Name: LFA1-NAME1
Payment Type(Group Key):
Posting Date: BSAK-BUDAT
Clearing Date: BSAK-AUGDT
Document Type: BSAK-BLART
Fiscal Period: BSAK-MONAT
Fiscal Year: BSAK-GJAHR
2. Or if I just need to have a report like FBL1n, but have group key on the report, any other report I could use?

Hi
Sorry for my unclear question...
What I need is: We need a report on Vendor cleared items, which have a column is Payment Type, to refer to what kind of payment to the vendor, like it's a Adv. fee. Our solution is to use GROUP KEY field in the vendor master data to maintain the payment type information, as it's vendor specified. So for common understanding, we could use FBL1n report, use GROUP KEY as a selection and run out the report. Unfortuntely, we could select by GROUP KEY, but we can not have it shown on the report, from the layout.
So we decided to use SAP Query, which is not a very difficult one. But I found from Query, and the table/ field I refered in my previous message, I could only see some of the records. If one item is cleared in BSAK, I could not find them in my query report made by me. So hope this time my question is cleared, thanks very much.
Or, if our need is to find a proper field to maintain a information in master data, and also can be shown in the FBL1n report, may u suggest?

Similar Messages

Reset Cleared Documents and Vendor Open Items Report FBL1N

Hi all,
I have following scenario:
- In last month, we had 2 documents (invoice and payment) cleared against each other. We created open items report as well as open items correspondence sent to Vendor. Obviously, the docs were not included in report.
- In this month, we have reset and reverse clearing document of the documents. We create report again with the open key date as in last month. It should not include the 2 docs but it did with whichever key date we chose.
Is there any setting that open item report doesn't include cleared item at the key date when we run report for previous month?
Thanks and Regards,
Dau

Hi Dau,
If i understand you correctly then you posted and paid invoice in Jan 2012 and generated the open line item report for Jan which correctly did not include this cleared invoice.
Now in Feb 2012 you reset and reversed this payment document.
The issue is when you execute the report FBL1N again then you get the open line item for this invoice correct. Please confirm what is the open item key date that you are using here for generating this report
If you keep it 31.01.2012 then definetly this invoice should not appear in the report but if you keep that 29.12.2012 then this line item would for sure appear.
The importance of key date is to limit the report to certain date. The system selects all items posted up to and including the specified key date and open for this period.
so I think your issue is with the key date.
Hope this helps you.
Regards,
Prasad

Doubt about report FBL5N of screen field:Open items and Cleared items

hi
i know the report FBL5N is use DDF LDB and the report work flow is BSID->BKFP->BSEG
but i don't know to differentiate Open Items and Cleared items in this report.
Open items and Cleared items stand for a field flag in these table (BSID,BKFP,BSEG )? if true the field is?
or they must be calc in program ? if true what about calc rules?
waiting for help! thank you!

Hi,
Here is the difference in Open Items and Cleared Items.
In FI first the document is Open (when it is posted) so the entry is made in table BSID. Once the document is cleared, it will move from BSID to BSAD. And for Cleared item you will see Clearing Document no and Clearing date values updated (these are blank when the item is open).
The only difference in Open and Cleared is via Clearing Document and Clearing Date. If the values are present, it means document is cleared.
Hope this helps.
ashish
Message was edited by:
Ashish Gundawar

Cleared Items in SAP shows "0" in AP Report in BW?

Hi
We have a AP: Days overdue analysis report based on std DS 0FI_AP_3. The report shows clear items as well in the BW report.
can anyone explain me the purpose of the AP report and how to make the clear items not display in the BW Report?
Thanks in advance
Ishi

Hi,
The DS is to get Payments done to Vendor. So the query based on it will provide you with list of outstanding payment that are overdue and my attract interest. Mainly a Finance department concern.
Second - there is a field in the datasource that defines the status of the document. Filter your query based on the field of your requirement and you'll get what you want.
STATUSPS - Status of the FI item (O = open, C = cleared)
Hope this helps
Raj

Cleared items on 31.05.11 is shown in the report S_ALR_87013344(GR55, 8A99)

Hi
The user has cleared the vendor account on 31.05.2011 but when he executes the transaction code S_ALR_87013344 vendor open items for profit center he still sees on the 31.05.2011 in this report. That means it is open item on profit center. But in FBL1N 31.05.2011 it is shown as cleared item.
Is it standard behavior of the transaction code S_ALR_87013344(GR55, 8A99)
Thanks in advance
Best regards
Chaithra

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Open and Cleared Items

Hi all
We are currently busy finalising our FI-CA BW Data Modeling exercise - and in process to complete Dataflow documentation.
We will make use of the standard open and cleared item extractors with enhancements on different levels. Some background on the requirements:
- We will have to extract document types, divisions, dates, clearing reasons, contract account, Business Partner etc.. information to meet the requirements.
- We will have to keep history for at least 26 months to produce the required management reports (very high number of data), and 'partition' the cubes on date level for both Cleared and Open Items.
- Most of the reports display 13 months worth of billing/ payment figures. I.e. the report for the end of October show billings vs. payments for October 2006, September, August, July, ... to October 2005.
- The requirement is that the report figures will not change from one month to the next (i.e. if I run the report for end of October - all figures from October 2006 to Oct 2005 will remain the same when I run the report for end of November). I.e. if reversals, transfers, returns etc. occur - these will be picked up in later months.
- For the above requirement, we are looking at extracting open (end of month) and cleared items (for the specific monthly interval) on a monthly basis, and appending the data in the cubes. We will then always base the June figure in the report on the June month extraction (LAUFD/ LAUFI fields) and we will pick up any movement in the next month/s - i.e. July.
Has anyone had these types of requirements before - to report on billings vs. payments, and report on history as described above. We would appreciate it if you could share your report requirements, and also design documents, especially the DataFlow documentation that we can look at as input to our design.

We had a requirement to retrieve "aging of receiveables" by customer. Basically, it goes thru each record and depending on the due date places the amounts in the following buckets (example). 0-30 day Overdue, 31-60 days Overdue, 61-90 days overdue, 30+ days overdue, 60+ days overdue) etc all the way to 6+ years overdue.
There are also cooresponding buckets for coming due analysis. For example, what is: 0-30 days coming due, 31-60 days coming due, 30+ days coming due, etc...
To do this, first I needed to be able be able to produce an open items statement at any given time in the past. Now, this seems impossible because of how the items go from open to cleared all the time. And an item that was open one month ago, may not be open anymore.
What I did was first remove any selections on item status. Then compare the posting date with teh key date in the past, if the posting date is less than or equal to the key date, keep the record.
Then compare the clearing date with the key date. First, keep all that are #. (This keeps all records still open from that posting date/key date)
Then, add another check for all items that were cleared after the key date (GT Key Date). This gives you the open items on that date.
Hope that makes sense. Let me know if you want clarification.
/smw

Display between open items and cleared items in FS10N

hello all,
I have the following problem.
When I go with FS10N with double click on the initial balance of an G/L account I get the message:
"A large number of line items were selected
Recommendation: Only display open items
Do you want to display open items only?
Yes or NO?"
If I click yes, I get the open items only and if I click no, I get the cleared items. The strange thing is that I get same line items in both reports. For example, I can see same line item, one time as cleared (when I click no) and one time as open (when I click yes).
Do you know the reason for this? For both reports I click on initial balance, so key date should be 01.01.2009, if I run FS10N for fiscal year 2009. Right?
The user is confused in this situation because he is not sure if the item is cleared or not.
thanks for quick reply!
Daniel Nicula.

If you click yes, you get the open items only , but if I click no, you don't get the cleared items only. With NO, you get ALL items.

Cleared item swowing as a Open item

Hi All,
I posted a document in f-02 for bank charges the entry was bank charges a/c debit and bank a/c is credit. and i posted the same data into ff67. and for reconsilation i upload the same data into FEBA for bank statement. now this document is cleared.
but the problem is when i see this document in FBL3N this document numbe showing in Open items but i cleared allready.
Please give me the solution for this.

Hi....
Those are items we cannot delete first we have to reverse those items using the FB08 for open items ..other wise use T.code FBRA for clearing items
once done the all activites after that you have dleted the statment number number useing program Goto SE38 and execute the following report: RFEBKA96.
On application put 0001. Here you will find all the statements. Mark the ones you want to delete... and press Delete Statements. This will permanently delete the load from your system.
HINT: to search the statement you want to delete (Short Key), query it using table FEBKO.
After delete the Bank Statement, the following steps can be solved. Please try:
T.Code: FEBP
The following parameters to be entered:
Statement date: The same statement date
Statement number: The same statement number
Select u201CPost immed.u201D Select
Execute
Note:
Please note that statement date is very important and same to be entered to process all the data for posting.
Finally check the statement file debit and credit balance it must be Zero
Than try to post once again ..it will allows you post
I hope it will helps you
Regards
vamsi

Reset Cleared Item

Hi,
I want to reverse some postings. The problem is these postings are already cleared. Now I want to reset these clearing items in order to reverse the posting.
How can I find clearing document number?
Thanks

Hi
Go to Line Item Display Report and give those original document numbers and execute.
Against every Original Document Number there will a Clearing Document Number.
Take those Clearing Document Numbers and go to FBRA and give the Cleared Document Number and save , then system will prompt for Resetting, Resetting & Reversing.
Select Resetting and Reverse.
This will resolve your issue.
Regards
Venkat

Line item report on secondary cost element (cat - 21)

Hi Gurus,
Secondary cost element with category 21 is used for internat settlement from order to wbs or wbs to cost center. But can we see line item report on this cost element. Or we cannot see any line item report on this cost element. it is just used for internal settlement purpose.
Please clear this doubt. thank you

Hi Mohit,
I hope you can have line item report @ order and WBS element stright away...
for orders use: KOB1 transaction code for actual line items, where you have the facility of entering CE or CE group to find the vaues related to particular cost elements in the order. If you are flexible with CEs related to 21, give there otherwise create a CE group specific to 21 category and enter the group and find the results you want.
same way for WBS elements/projects: we have transaction code CJI3 for actual line items, here also we can enter CE or CE groups
Not only for actual line items, we have the option of viewing plan line items, budget line items, and commitment line items @ both order and WBS level with different transaction codes other than mentioned above, like KOB2, KOB3, CJI4, CJI2 etc
I hope it helps a lot if I understand your query right
Regards..
Jose

Issue regarding partial payment & cleared items.

hi Techies,
I want to develop report which should show all cleared item. (accounting document no, corresponiding basic amount). End user is using residual clearence procedure for partial payment. i.e.,
consider if vendor has to pay rs 10000 as service tax to company , its stored in open items against one Accountin Document no.
Belnr            Amt
000101 -
> 10,000
supppoes he pays 3000
system is creating one clearing document against this 3000 payment.
NOW REST OF 7000 EARLIER CLERING DOCUMENT IS BECOME ACCOUNTING DOCUENT . THIS CYCLE IS CONTINE UNTIL CLEARS ALL THE AMOUNT.
INTIAL STATE.
000101 -
> 10,000 -
> CL1. (PAID 3000)
SECOND STATE
CL1        -
>   7,000----
> CL2 (PAID 3000)
THIRD STATE
CL2        -
>   4,000----
> CL3 (PAID 3000)
FOURTH STATE
CL3        -
>   1,000----
> CL4 (PAID 1000)
FIFTH STATE
CL4        -
>   1,000----
> CL5 CLEARS ALL AMT
HE WANT TO DISPALAY ACCOUNTING DOCUMETN NO WHICH ARE CLOSED (I.E. CLEARED )
AT THE END OF FIFTH STATE ONLY THIS ACCOUNTING DOCUMENT NO SHOULD DISPLAY IN REPORT OTHEWISE NOT.( IE IF USER RUN THE REPORT AT SECOND OR THIRD STATE, THE ACCUNTING DOCUMENT NO SHOULD NOT DISPLAY )
THERE IS NO LIMIT OF PARTIAL PAYMETNS I.E VENDOR CAN PAY HIS AMOUNT AS MANY TIEMS HE WISHES.
IS THERE ANY SOLUTION TO THIS REPORT...
REGARDS
RAJU

Hi,
Yes it is possible.
Check the docuement types of the documents, you should get the answer in that.
Regards,
Prakash Pandey

Cleared items to be open.

Hi,
How to convert d Cleared items in to open items documents.
Reg/Vs

Dear Vinu,
Go to FAGLB03, select the GL Account Appearing in your FSV that is showing the Open item. This must be your recon account for Customers > Execute the report.
This report will display All items of all customers assigned to this recon account. Filter out Open items only. After this, Press Control F8 to change the layout > Include the customer in the layout. Once you have done that, Click on the customer column in the report and Press Control F1 (Subtotal). You will be able to display the customers balance appearing in your FSV.
You can also display Customer Balance report through the T-CODE "J3RFDSLD". You will be able to see the balance of all customers.
Best Regards,
Anss Shahid Essani
Edited by: Shadow_sirjee2005 on Mar 5, 2011 3:56 PM

HOW TO DISPLAY VENDOR WITH NO OPEN CLEARED ITEMS

Hi All,
We want to delete some of the vendors which do not have any open or cleared items. Can anyone tell me the report ,T Code or ant table which we can run to display the vendors with no open ,clear items.

you will have to first block the vendor for the posting in co.codes using FK05 and then assign that vendor for deletion flag using FK06 , in the next archive run it will be deleted automatically.
You cant just delete the vendor from the system
Assign points if helpful.
Shefford

Utilities - open items/cleared items enhancement with HKONT from DFKKOPK

Hi friends,
My client needs item level GL Acccount ( HKONT ) from DFKKOPK table for both Opne & Cleared Items. So i enhanced both Datasource( 0FC_OP_01 and 0FC_CI_01) with this new field HKONT which gets data from different table i.e., DFKKOPK. Now i have encountered one problem. The link between these talbes is only OPBEL(FICA doc no).By doing so we are getting item level records but we are not able to figure out the distribution of 'Contract(VTREF)' values across these records.
For examle for doc no : 900000031212 there are 3 records at DFKKOP base table. But in DFKKOPK table it has 19 records with different sub G/L Accounts. After the execution of CMOD code, in RSA 3 , 3 records are replaced by these 19 records successfully with new sub G/L values but some fields like Contract , Division , cleareding reason etc..are showing only the first records values for all these 19 records. But this gives reports wiith wrong contract and dividion values.
So my question is " how to bring these SUb G/L account(HKONT) values from DFKOPK table .
Waiting for good replies,
Murthy

We had a requirement to retrieve "aging of receiveables" by customer. Basically, it goes thru each record and depending on the due date places the amounts in the following buckets (example). 0-30 day Overdue, 31-60 days Overdue, 61-90 days overdue, 30+ days overdue, 60+ days overdue) etc all the way to 6+ years overdue.
There are also cooresponding buckets for coming due analysis. For example, what is: 0-30 days coming due, 31-60 days coming due, 30+ days coming due, etc...
To do this, first I needed to be able be able to produce an open items statement at any given time in the past. Now, this seems impossible because of how the items go from open to cleared all the time. And an item that was open one month ago, may not be open anymore.
What I did was first remove any selections on item status. Then compare the posting date with teh key date in the past, if the posting date is less than or equal to the key date, keep the record.
Then compare the clearing date with the key date. First, keep all that are #. (This keeps all records still open from that posting date/key date)
Then, add another check for all items that were cleared after the key date (GT Key Date). This gives you the open items on that date.
Hope that makes sense. Let me know if you want clarification.
/smw

Open items report

Hi
I required to get a report which shows the number of open items. The report should contain the GL account and the number (count) of open line items. This should also have the facility to execute several GL accounts at once as well.
I checked with FBL3N, but it does not show the number of open line items for the GL accout
Please let me know the transaction code for such report
Thanks

Hello everybody:
I need open clearing items to clearing with other items. For example in my job was issued a payment to a supplier, but was applied to the wrong invoice, for this reason I need to open this compensation payment and apply it to the right invoice, the Tx FBRA, tells me that I must cancel the payment, but the payment was delivered and collected by the supplier, so I can not avoid it and just need to open the clearing.
Can us help me please????
Thanks
María

AP cleared Item Report

Similar Messages

Maybe you are looking for