Change the IP address on which AS1g is installed

How can I change the ip address of the system on which AS10 and infrastructure is installed. I wantted to add another ip to it.

Yes, Settings>wifi
click the small i in circle, then set as desired.
Please only do this if advised or you understand the implications associated with using static IP addresses.

Similar Messages

HT5620 I want to change the email address to which all the reset security information (emails) go to. But I cannot see that email address in the list when I click on the 'Name, ID and Email Addresses' section.

I want to change the email address to which all the reset security information (emails) go to. But I cannot see that email address in the list when I click on the 'Name, ID and Email Addresses' section.
How can I change it when I cannot view it on my account. I am not even sure how this got setup.

If you mean your rescue email address, it's in the Passwords and Security section, after you answer the two security questions.

Hello, My old email address which I have used as my apple id for 10 years is being made redundant. I have changed the email address to a new gmail one and this is my new apple id. But my iMac has not recognised this. It keeps saying it wants the pa

Hello,
My old emails address which I have used as my apple id for 10 years is being made redundant. I have changed the email address to a new gmail one and this is my new apple id. But my iMac has not recognised this. It keeps saying it wants the password for my old email address. I have seen some advice on these forums which suggest signing out of iCloud and then back in again. But when I start doing this it asks me if i want all the photos deleted that have not been downloaded onto the mac.
I have had an iCloud account for quite sometime and I'm afraid of losing everything in my cloud if i sign out and sign in with a new id.
Is this fear realistic?
I know I can change back to my old email, sign out and then sign in wight he new one...
Please help!

This did not work for me. My old email account for iCloud still pops up on my screen every time I open my macbook. I've deleted it, reset it, every thing I can think of and it still shows up. I think six months of this is more than enough time to wait.
RDG

How can i change the email address in facetime which people can use to call me on my mac book?

i have an ipad and a mackbook air both using the same apple id. i would want to use different email address for my ipad and macbook. where can i change the email address in facetime for macbook. currently both the device use the same email address(apple id) for me.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

I am trying to change the email address associated with my existing account to free up my university email address for use in obtaining Creative Cloud.

I am trying to change the email address associated with my existing account to free up my university email address for use in obtaining Creative Cloud. Every time I go to the account settings of my existing account (which currently uses my university email, as I set it up years ago and had no idea it'd eventually cause problems), I enter a different email to use for that account but I continuously receive an error message saying "account changes cannot be saved." It makes me think that it's because the email isn't verified (funny, it actually is verified since it has been the alternate email on the old account for years), but when I click the "send verification email" nothing happens (that is, no email is sent to that other email address).
Anyway, my university is now requiring that faculty create new accounts using our university email addresses in order to register/use Creative Cloud. Am I able to delete my old account, or can anyone help me actually change the email address associated with my old account without getting a "changes can't be saved" error?

This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
or
Make sure that EVERY DETAIL is the same in every place you enter your information
-right down to how you spell and punctuate the parts of your name and address
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-email address https://forums.adobe.com/thread/1446019
-http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html

How/can I change the "from" address in Mail?

I just upgraded to Mountain Lion, and have come across a problem.
I use iCloud for my mail account, but I want to change the "from" address - so the return address on my messages is NOT icloud.
I could do this in Lion.
In the mail account settings, there's an option that says "alias" and it lists (me)@mac.com, (me)@me.com and (me)@icloud.com, and then "custom" is an option.
Great!
So I choose Custom, and then I can type in the "from" address that I want.
However, when I go to save those changes, it tells me the SMTP server can't be left blank.
What?
It's not blank! I didn't touch it. The icloud server is still there!
Furthermore, it's greyed out, so even if it WERE blank, it's not like I can edit it!
Once this happens, the only fix is to delete the whole account from mail, and to disable mail in the icloud control panel, then re-add it.
Has anyone figured out to work around this?

Apple's outgoing mail server - just like 99.9% of all other SMTP servers, does not allow "relaying", meaning you use a domain in the 'sent from' address that is different from a domain hosted by the server. The simple reason is to make it harder for any spammer - not assuming you are one - to abuse the server. While bandwidth, server capacity and server load are some issues, the main fear for ISPs is to get blacklisted, and consequently mails from such server being refused by all others.
It's a general rule, and while exceptions might be technically possible, it would be a manual act which at a certain rate would become unmanageable.
If you want, read about the antonym, open mail relay servers, here.
You see, it's actually good behavior and absolutely in your interest to prevent you from using a "non-in-house" 'sent from' address.

How can I change the email address on my account?

My account is tied to an old email address which hasn't existed for about a decade, how do I change this?

Hello Chris,
This can be done through our Apple ID site.
Apple ID: Changing the email address you use for your Apple ID
http://support.apple.com/kb/HT5621
If your primary email address for your Apple ID does not end in @icloud.com, @me.com, or @mac.com
Note: If your Apple ID and your primary email address are currently the same, changing the primary email address will also change your Apple ID. If your Apple ID and your primary email address are different, changing your primary email address will not change your Apple ID.
Follow these steps to change the primary email address for your Apple ID:
Go to My Apple ID (appleid.apple.com), click "Manage your Apple ID," and sign in.
With the Name, ID, and Email Address drawer selected, click Edit next to Apple ID and Primary Email Address.
Enter your new email address.
Ensure that the email address you enter:
Is one that you regularly use since this will be the primary email for your account
Is a valid email address
Is not already associated with another Apple ID you have
Is not an address that ends in @mac.com. @me.com, or @icloud.com
You will be asked to verify the email address to confirm that you can access it and that it belongs to you. When you receive the verification email, click the Verify Now link and sign in using your Apple ID and password to complete the confirmation.
Cheers,
Allen

How do i change the primary icloud account which is set on my computer?

how do i change the primary icloud account which is set on my computer?

tsand66 wrote:
I do not have the option to do that as there is no icloud preference pane, there is only a mobile me preference pane.
the ssystem is recent, 10.7.0 or a bit higher.
the computer switched from my wifes address book to my address book becuase it was set up to my iclud account (it was my computer for a short time).
she has a back up on icloud but i cannot switch the account from the computer anywhere.
You need at least 10.7.2, check that you do have that, 10.7 is insufficient. Post back with your OSX version.

I just got a new iPod nano, and I'm really excited about it, but I have a problem. A long time ago, I changed the email address on my account, and now all the songs from that account are gone. I don't know how to get them back. Can someone please help me?

This is really frustrating, I've been trying to get my songs back for hours

When you say "account," do you mean your iTunes library, because your iTunes library is what is on your computer? Your iTunes library does not have an email address. An account that is related to iTunes is your Apple ID (which is an email address) and you use it as your user name to sign in to the iTunes Store, to make purchases. Changing your Apple ID will not make songs disappear from your computer's iTunes library.
If you had an Apple ID and used it to make song purchases from the iTunes Store, and then started using a different Apple ID, you should be able to re-download the songs purchased with the old Apple ID. In iTunes, sign in to the iTunes Store using your OLD Apple ID (and password). That may not be your current email address, but Apple uses it as your user name, so it does not matter.
On the iTunes Store Home screen, click on Purchased under QUICK LINKS. This takes you do the Purchased screen, where you can re-download previous song purchases (for that Apple ID) at no cost.
NOTE: If those song purchases are from more than a few years ago, you may also need to authorize your computer to play (and sync) songs for your old Apple ID.
For songs that were not purchased from the iTunes Store, if they are also gone, you cannot get them back unless you have a backup (or they are still loaded on your old iPod).
If that's not what you mean by "changed the email address on my account," please post back with more details.

How can I change the return address ?

I have an email forwarding service with it's own email address. Any email sent there will forward the email to any address I specify. I want to be able to write messages from my Mail account and have the return address (i.e. when they reply it goes to the email forwarding service and will then be forwarded to my Mail address) be the one I use at the email forwarding service.
I have tried changing the email address in Accounts/preferences/Account info to be my other email address but Mac email address and password is needed in those 2 fields to send mail . There is no other place (as far as I can see) to put my alternate email address.

Whether the following process works depends on whether the outgoing server you normally use allows you to do this - some do, some don't.
Create a new account in Mail Preferences>Accounts, The Description can be anything convenient, the Email Address is that which you want to use, and enter your name. For Incoming Mail Server, Usere Name and Password enter any old garbage (If you do this with more than one address the User Name garbage must be different for each of these accounts you set up).
Set up the Outgoing Mail Server the same as the one you normally use.
Now click on the 'Advanced' tab. Check 'Enable this account' but do not check 'Include when automatically checking for new messages' (or you will keep getting error messages on auto-checking. Note that if you manually 'Get all new mail' you will get error messages for these accounts).
Now the domain addresses will appear as options in the 'From' drop-down menu beneath the Subject field.
In Mail Preferences>Composing set 'Send new messages from' to 'Account of selected mailbox' and you should find that when replying the 'From' address matches the one the message was sent to.

Windows 7-8.1 Can not change the MAC Address on wifi and cannot load login page in public HotSpot.

Windows 7-8.1 Can not change the MAC Address on wifi and cannot load login page in public HotSpot.
Adapter: Ralink RT3070 Chipset wifi adapter
Tested: os Windows 8.1 Professional
Hot Spot: 802.11b
The first problem windows 7-8.1 got IP adress and connect he public HotSpot but cannot load login page or any other page. It does not work with it.
The second problem Wifi canrd/configure/Advandes (No network adress change function).Tested with the default windows driver and the ralink rt 3070 driver the same problem.On windows XP the same function the same driver works perfectly.
multiple users to have expressed interest in the problem But Microsoft not corrected the problem window7-8.1 10?
lizardsystems.com/wiki/change_mac_address/faq/change_mac_address_in_windows_7
blog.technitium.com/2011/05/tmac-issue-with-wireless-network.html
superuser.com/questions/519189/how-to-change-the-mac-address-in-win-8-to-spoof-a-roku-player-through-a-wifi-spl
social.technet.microsoft.com/Forums/windows/en-US/59e07df3-471c-499e-ad5f-e7cb507595df/cannot-change-mac-address-in-windows-7-driver-has-option-doesnt-work-neither-does-regedit-ms?forum=w7itpronetworking
networksteve.com/windows/topic.php/CANNOT_CHANGE_WIRELESS_%28SPOOF%29_MAC_ADDRESS_ON_WINDOWS_7/?TopicId=16810&Posts=1
On windows XP or linux have a MAC adress Change function allow 00 mac adress and another normal mac adress range.On windows 8.1 all Mac changer program dont work.This 2,6,A,E on second adress are not vaild Mac adress. You simply can not use normal MAC
addresses on windows 8.1.When i connect the usb the Pc windows 8.1 recognizes the adapter but the default driver and the downloaded ralink driver the same problem.On windows xp the current driver works perfectly have (Local Mac Network Adress) funktion
and works with the 802.11b hot spot.I got the internet my PC and laptop too public HotSpots and another wifi HotSpots if wont work correctly i can not use neither the windows 7,8,8.1 or 10. Many users have expressed interest in the problem more forums.
The 3. problem im tested in virtualbox the windows 7 and 8.1 on 8.1 (on the blue wifi platform) not show correctly the signal strengh. On windows 7 show this correctly.The windows 7-8.1 Configure/advanced the advanced options on Ralink 3070 the default (windows
driver) somehow downgraded function is less than for Xp. Configure/advanced the advanced options (needs to be upgraded in the future) because it does not advance but rather regressed.
Today it is very common these wi-fi technology increasingly used (hotels,Public Hots Spots,Internet coffe,) growing free bublic wifi projects. The wifi funktions on windows need debugging and modernize.The quality of Wi-Fi is now the operating system
is now a thing order which is not good then the operating system is unusable.

Hi,
For changing the MAC address for Windows 7 is designed with some limitation, we cannot get over it. Thanks for your understanding.
Under Windows 7, the possible range of spoofed addresses for wireless adapters that can be set is limited. To be used by Windows 7, a spoofed MAC address should have 0 as a least significant bit (unicast) and 1 as a second least significant
bit (locally administered) in the second nibble. Thus possible values for the second nibble are limited to 2, 6, A and E.
In other words
MAC address: “XY-XX-XX-XX-XX-XX” “X” can be anything hexadecimal. The hexadecimal “Y”, written in binary format, is Y: “kmnp”, where “p” is the least significant bit;
p=0 --> unicast;
p=1 --> multicast;
n=0 --> globally assigned MAC;
n=1 --> locally administered;
So, actually MAC can be changed to any combination in which p=0 and n=1;
“Y” can be 2, 6, A or E.
So the possible MAC addresses in Windows 7 for wireless adapters:
X2-XX-XX-XX-XX-XX
X6-XX-XX-XX-XX-XX
XA-XX-XX-XX-XX-XX
XE-XX-XX-XX-XX-XX
For the wifi hotspot issue, please check this blog to see if it can be helpful.
Windows 7 Connectivity Problems in Public Hotspots
http://blogs.technet.com/b/patrickr/archive/2010/07/28/windows-7-connectivity-problems-in-public-hotspots.aspx
Kate Li
TechNet Community Support

It's possible to change the device address of a NI2503 board

It would be nice to change the device address of a NI 2503 Switch board.
I have several NI 2503 Switch Boards in my PXI 1006 Chassis. After installing the boards and performing a MAX Refresh the device addresses of the boards are listed in a random (?) order. So its troublesome to get the information which device is related to which slot.
I have more than one 1006 Chassis with the same configuration of NI 2503 Boards and I may avoid to have different software versions with different device numbers for the chassis.

The short answer is no you can't modify the device numbers for the switches.
The long answer is that device numbers are set by the bios and you can't modify them. In your 1006 chasssis there are 3 buses and in each bus the devices start at some number like 15 or 20. As the slot number increases the device number decreases. The best way to view what device numbers are assigned to which slot you need to open the pxisys.ini file on your computer. The slot number and device numbers are total dependant upon your controller. The best place to verify that you have the correct ini file is to see the following webpage : PXI VXI/VME and PXI Controller Peripherals. The ini file is only an indicator of
the settings in the bios. If you change any of the devices then you will lose functionality of that board.
There is some hope though. One thing that you can do is use the IVI support for the switches. If you download the Class Drivers for switches, then you will be able to create an IVI devices and logical names in Measurement and Automation Explorer (MAX). The IVI devices will hold the address of the module (i.e. PXI0::14::INSTR). Then create a logical name that points to the IVI virtual device. This logical name can then be referenced in LabVIEW instead of the module address. Then when you need to modify the slot number/device number of a device you simply need to modify the IVI device. There is a tutorial that will step you through this process found in the Developer Zone at : Using Measurement & Automation Explorer to Configure Your IVI System
Good Luck

Change the email address in VF02 before saving

Hi Experts,
I have a requirement in which I have to change the email address when the user selects my custom output type in VF02 transaction .
The process :
VF02 - Enter a billing document number - Go To - OUTPUT - Select the desired OUTPUT TYPE which has transmission medium as External Send - then Save-
after this my requirement demands to give a pop up in which the user will enter his email id and then the mail goes to the email address entered by the user in the popup.
so I would like to know if there are any user - exit available for this scenario and how to proceed further.
Thank you in advance

Check all
Transaction Code - VF02                     Change Billing Document
Exit Name           Description
SDVFX001            User exit header line in delivery to accounting
SDVFX002            User exit for A/R line in transfer to accounting
SDVFX003            User exit cash clearing in transfer to accounting
SDVFX004            User exit G/L line in transfer to accounting
SDVFX005            User exit reserves in transfer to accounting
SDVFX006            User exit tax line in transfer to accounting
SDVFX007            User exit: Billing plan during transfer to Accounting
SDVFX008            User exit: Processing of transfer structures SD-FI
SDVFX009            Billing doc. processing KIDONO (payment reference number)
SDVFX010            User exit item table for the customer lines
SDVFX011            Userexit for the komkcv- and kompcv-structures
V05I0001            User exits for billing index
V05N0001            User Exits for Printing Billing Docs. using POR Procedure
V60A0001            Customer functions in the billing document
V60P0001            Data provision for additional fields for display in lists
V61A0001            Customer enhancement: Pricing
J_3RSINV            Customer enhancement: Pricing
No of Exits:         17
Rewards if useful....................
Minal

I have just changed my ISP and they have informed me that i have to change the IP address on my time capsule. Please can someone tell me how todo this? Thanks

I have just changed my ISP and they have informed me that i have to change the IP address on my time capsule. Please can someone tell me how todo this? Thanks

This should really be unnecessary but anyway..
If you mean the internal IP of the TC, the it can be changed by changing the dhcp settings.. which is weird.
It looks a bit different in the v6 utility but is easy to do..
See the DHCP beginning address is split into sections.. change the front section from 10.0 to 192.168
Then update the TC.. then you will need to change everything on the network as the IP will need to change.. I recommend you simply turn everything off and then on again in correct order.. modem.. TC.. clients. 2min gap.

Changing the multicast Address and Port giving error

I am using Coherence 3.3.1 jar files (Coherence.jar and tangosol.jar) in my local application. But when I try to change the multicast Address and Port in tangosole-coherence.xml(in Coherence.jar) then it is giving this error -
"This member could not join the cluster because of an incompatibility between the cluster protocol used by this member and the one being used by the rest of the cluster. This is most likely caused by a Coherence version mismatch, or by mismatched protocol filters (e.g. compression, or encryption)"
If i am using unique IP and Port then how can it be in a Cluster as this error stating. Please reply ASAP.

Hi,
There is a good chance that there is already the IP and port is being used by another cluster (which uses different versions of jars or configurations) and hence, when you are starting your cluster, throwing the error.
Can you double check if another cluster is already using it or not ?
Thanks,
Amit

Change the IP address on which AS1g is installed

Similar Messages

Maybe you are looking for