Change the file permission of listener log (log.xml) 11gR2

Hi
Is there a way to change the file permission of the listerner log (log.xml)? everytime the a new log.xml is created the file permission is 640.. i want it to be 644. Is there ay configurations that needs to be done?
DB version is 11gR2.
Thanks

peacock wrote:
Hi
Is there a way to change the file permission of the listerner log (log.xml)? everytime the a new log.xml is created the file permission is 640.. i want it to be 644. Is there ay configurations that needs to be done?
DB version is 11gR2.
Thanks
       umask [-p] [-S] [mode]
              The user file-creation mask is set to mode. If mode begins with a digit, it is interpreted as an octal
              number; otherwise it is interpreted as a symbolic mode mask similar to that accepted by chmod(1).   If
              mode is omitted, the current value of the mask is printed. The -S option causes the mask to be printed
              in symbolic form; the default output is an octal number. If the -p option is supplied, and mode is omit-
              ted, the output is in a form that may be reused as input. The return status is 0 if the mode was suc-
              cessfully changed or if no mode argument was supplied, and false otherwise.

Similar Messages

How to use FilePermission class to change the file permission in Linux

Hi all,
I'm running in a issue related to changing the file permission under Linux environment. I'm using Suse 10.0 Linux and run jdk 1.5 java runtime.
I want to create a file during execution time and change the permission of the same. I use File.createNewFile() API to create file. By default it does not have all the 3 permission (read,write,execute) for all the user ( user,owner,group). Through program I have to change the file permission ( equal to execute ,chmod 777 filename).I donot want to use runtime.exec() with chmod as the argument , since it creates a process to change the permission which may impact the performance. I want to try FilePermission class , by giving filename and permission as the argument. But it is not changing the permission . Could any one faced this problem ?
If any body guides me, how to change the permission of the file under Linux using FilePermission class , it would be helpful.
Thanks,
Sankar

How do I set the Umask prior to starting the program
? Could pls explain in steps.I don't think umask can help you. The mode mask prevents permission bits from being set when a file is created, but does not force any bits to be set. So if execute permission is not set explicitly when a file is created, umask will do nothing about it.
But if you want more information about umask, see the man page for your shell script (sh, csh, etc.) or "man 2 umask".

How to change the file permission?

Hi,
when i create a file in UNIX, i want change the permission file,
I used
Process pgrant = Runtime.getRuntime().exec("chmod 777 "+file.getName());
but i riceive the following error
java.io.IOException: chmod: not found
What can i do?
Regards,
esmeralda13

either call the chmod executable with it's full path, or make sure that the shell your Java app is running in has it's path set correctly.
- K

What is the command to change the file permission of all the files in a directory recursively?

I know it is chmod -R <permission> Files/directory_name in unix/linux. Tried the same format but not getting the desired output.
Any suggestion about the format of command in Solaris ?
chmod <permission> filename is working but not chmod -R <permission> directory_name doesn't.
Thanks
Shashank.

This command is correct. What is the result of the command if you run it ? What is the command that you use ? And which file system format is it ?

How to change the retention period of os watcher log,

How to change the retention period of os watcher log, by default it is 7 days. but in our exadata env. automatically oswatcher logs are deleted , so i want to check the retention period.
Regards,
Ani

Hi Ani,
Go to :- /opt/oracle.cellos/validations/init.d/oswatcher
Open the file "oswatcher" file.check for the line "/startOSW.sh X Y Z". Where X is the snapshot interval
make the change and you are done
Regards,
Sunil Bhola

HT1941 I have inadvertently changed a file permission setting. When opening Aperture I get the following; Aperture cannot access this library. To use this library make sure it's file permissions are set correctly. I am an old dude new to Mac OS. What up?

I have inadvertently changed a file permission setting. When opening Aperture I get the following; "Aperture cannot access this library. To use this library make sure it's file permissions are set correctly". I am an old dude new to Mac OS. Looked in settings but have no idea how to allow file sharing to myself. I have been using Aperture actively for 6 weeks. I'm the only one using this Mac. What up?

Back up all data now.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. You can demote it back to standard status when this step has been completed.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Changing the file format

hi guys,
i hv a requirnment in which i need to read a file which is in .CGL format on a shared network path or application server which is nt possible to read directly so i need to first change the format of the file to .CSV and then read it using the FM KCD_CSV_FILE_TO_INTERN_CONVERT .
so plz tel me how to change the file extension
thanks
shivraj

Not quite sure how you arrived at conclusion that CGL must be converted to CSV... CGL might turn out to be just a plain text file (e.g. many log files have .LOG extension but are just plain texts), in which case you can simply read it directly. Whether you'll be able to make sense of the file data - is another question and it depends on what is in that CGL file. Again, conversion to CSV might not even help.
If CGL file is a proprietary format, you might not be able to read it in SAP at all without using some third-party tool.
More info on CGL extension:
http://pcsupport.about.com/od/fileextensions/f/cglfile.htm

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file ext

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
Bob

Bob
What do you have now.....
What computer operating system do you have?
We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
Does the above scenario apply to you?
The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
1. Place the DVD disc in the burner tray
2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
3. Go to
Get Media
"DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
"Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
With this VOB selected, click on Get Media to get the file from there into the project.
Should work fine.
Complications may be involved if the people who processed your footage gave you something other what is described above.
Please review and consider, and then we can plan our project strategy accordingly.
Thank you.
ATR

My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file loca

My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file location to run the update in all of my iTunes files as well as when I've tried reinstalling it.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

I tried to change the file type of the movie, but now I am unable to open/edit it in iMovie, HELP !

I tried to change the file type of the movie, but now I am unable to open/edit it in iMovie, HELP !

Thank you very much! This is exactly what I was looking for.
I appreciate your time and effort in solving my question : )

I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

How do i change the file preview image for mp4 files? I replaced the image but it doesnt show in my dock, instead it shows the first still of a movie

http://imageshack.us/photo/my-images/21/screenshot07m.jpg/
http://imageshack.us/photo/my-images/39/screenshot04s.jpg/
pls help. i change the file preview of a movie file, and it shows that i have changed the preview in finder but when i open the folder on my dock, it shows the still of the movie instead.
the image shows the film the hangover as an example. the movie poster is visible in finder, but reverts to a default movie still from the dock. this only seems to occur for mp4 files.

its nothing to do with itunes, its movies form the internet. i got the file preview by taking an image off the internet, pressing command c and pasting it on top of the small icon in the get info section

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

I want to change the file location for the automatic backup file bookmarks.file, but I can't find browser.bookmarks.file in the list on the about:config page.

I asked about automatic backup of bookmarks and received the following answer:You can make Firefox 3 create an automatic HTML backup (bookmarks.html) when you exit Firefox if you set the pref [http://kb.mozillazine.org/browser.bookmarks.autoExportHTML browser.bookmarks.autoExportHTML] to true on the about:config page. That backup is created by default in the profile folder as bookmarks.html, but you can set the file name and path via the pref [http://kb.mozillazine.org/browser.bookmarks.file browser.bookmarks.file] on the about:config page. I went to about:config page and toggled browser.bookmarks.autoExportHTML to “Yes” and it’s working. However, I want to change the file location, but I can’t find browser.bookmarks.file in the list.

The browser.bookmarks.file preference does not exist by default. Right-click in about:config and select "New > String" to create it.

List of downloads is blank after I changed the file to save to. How can I restore the list of downloads?

I have already tried the all the steps in this link.
'''http://support.mozilla.com/en-US/kb/Downloads%20window%20is%20blank?s=+downloads+list&as=s'''
I have changed the file to save to back to the original one as well.

Try opening the problem files using a text editor or file viewer to see what the first few bytes contain. All valid FM binary files for FM 11 will contain <MakerFile 11.0> in the first bytes of the file.
When updating books, it's sometimes better to just to create a new book file and add the files to that.
When renaming files in a book, changes at the system level will break any links/cross-references between files, so it's always best to use the Rename option in the Book file to change FM file names. This will maintain the correct linkages.

Change the file permission of listener log (log.xml) 11gR2

Similar Messages

Maybe you are looking for