Change user experience on the fly

I was curious is anyone has coded anything to allow a user to change his experience on the fly? In other words...I log and get my assigned experience. I then get a service call from a user who has a different experience (which provides a different navigation, different, etc..). The portal only has 2 experieneces. I would like to be able to have the person receiving the call click a link/button and get the other experience until they click it to change back.
*We can not provide another user account for the support person to log in as or to use the callers account info as this is against current policy.

Interesting concept. I coded up a quick group membership adder yesterday. Created a new group that is in the target experience, set that experience to higher on the list than the standard employ exp. Seems to work well ( though get a 'cant reach remote server' message in dev LOL ) for group addition, need to test whether the exp actually catches. A portlet on the homepages, only visible to employees allows you to toggle.

Similar Messages

Change User Status in the sales Order

Hello Experts,
I hope that somebody can help me.
I search to change the field User Status in the sales Order in the transaction VA02 before that the order be displayed.
I have searched in the UE MV45AFZZ, but i didn't found any form that i can use for my issue.
I found one form 'USEREXIT_FIELD_MODIFICATION ' by what the program pass when i press enter in the transaction VA02. but the problem that the status is changed in the data base only and not in the screen. In the screen i have always the same status as what was before, to have the new statut i must leave the transaction and execute it another time.
I don't want use forms for saving. What I want is the new status will be set when i press enter in the transaction VA02.
If doesn't exit one form that can resolve my problem, Can i use the Profile Parameters? In this case How use them?
Thank you very much.

Hi,
U can choose ur status in change status profile. Go to IMG-CRMTransactionsBasic SettingsStatus ManagementChange Status Profile for User Status.
Here u hv to define ur new status for the transacxtion and assign it to ur transactio. If u r not clear tell.
Reward points.
Thanx
Chinmaya

Changing user password in the external LDAP server from weblogic

Hi !
We have been successful in configuring the ldap security realm from weblogic 7.0.
We have also done the user authentication.
Now we want to allow the user himself to change his password from the application.Can
the user password which is stored in an iplanet directory server be changed from
application?If yes , then is there any extra configuration that needs to be done

I am not sure whether u got an answer for this..
But iplanet provides a web-link for end-users to change their LDAP password...u
can just give this link in ur app ..and iplanet will take care of the rest..
Krish Venkataraman
Bank Of America Corp.
Senior Analyst
"Mitali" <[email protected]> wrote:
>
Hi !
We have been successful in configuring the ldap security realm from weblogic
7.0.
We have also done the user authentication.
Now we want to allow the user himself to change his password from the
application.Can
the user password which is stored in an iplanet directory server be changed
from
application?If yes , then is there any extra configuration that needs
to be done

Changing project window on the fly ? - possible ?

Hi gentlemen,
Quick question,
I created an HD project with dimensions of 1440x180, and have all my overlay logos on 2 different timelines, in the position I want them.
I now have new video, but it's only 720x480, and when I put it on the timeline, of course the video is now too small in the display screen ( as it should be ) however, my question is this,
Is it possible to change-on-the-fly the dimensions of my project so that I can drop them down to the resolution of the new video ? ( 720x480 ) ?
Or am I out of luck here ?
Thanks for your help,
Dave.

Make a new project that is 720x480 and import the HD project into the SD project. The imported project will then be SD and you will keep all the edits that are on that timeline. You will have to Scale to Fit the HD footage the fit the SD frame size.

Change video format on the fly in JMF

Hi!
I am using some suns examples for transfering video/audio rtp streams over network to another computer which recives the stream with jmstudio.
My problem is, that if i want to change the format (for example video-jpeg to video-H263) i have to close the processor, set everything like datasource...like on the begining and send the data. If i try to do this format change on the fly, and if i use my code, a new stream will be created, and a new jmstudio-window opens. But i want to change just the format without seting new stream and let it play in only one player-window.
Is there eny posibility to solve this problem, mayby some code examples on internet (i tryed google, this and other forum...)?
thanks for help.
Adam

Thanks. This should solve my player problem.
But how to change a format without closing the processor and without reconnect end configure everything from beginning?
Is there a possibility to change the encoding format on the fly (dynamically)?
Bye Adam

Lost all files and applications installed after changing user profile in the registry of windows 8.1 pc

The original user profile on my windows 8.1 pc is C:\Apple\acer sm. I tried changing it to C:\Apple\Apple. After I rebooted my PC, I found out that all my files and applications are lost. What shall I do to recover them?
Your help would save my life. Thank you!

Hi AppleMist,
We wonder if you changed the registry entry or path of user profile.
If you did that in registry please try changing it back.
After changing your user profile and reboot, system won’t read the profile you changed but a new user profile (C:\Apple\acer sm or TEMP) should be created by system. Try renaming this new one as acer sm.old and changing the apple back to acer sm.
It should works fine if you didn’t change file in profile, if it doesn’t work perform a system restore.
Regards
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

User experience question for High Availability

Hi Experters,
Not sure whether this is right forum to post this message.
If anybody has already captured user experience for the failover environment, will appreciate their help on this. I will give overview of environment. Using PowerHA for ASCS/SCS failover, ORACLE Data Guard for Database failover.
Trying to capture user experience for the failover environment
if ASCS/SCS fail,
App Server Fail (using F5 Load Balancer which should reroute, unless all app server fail),
Database fail
with following cases:
1. User logged in, NO ACTIVITY. I believe NO IMPACT either ASCS/SCS fail or DB fail or App Server fail.
2. User logged in and run a transaction before failover.
     What will happen in case of ASCS / SCS
     What will happen in case of DB failover
   and what will happen in case of App server fail (NO High Availability, only redundant app servers.      MAX 4 app servers for each component)
3. User logged in and run a transaction during failover.
   What will happen in case of ASCS / SCS
     What will happen in case of DB failover
   and what will happen in case of App server fail (NO High Availability, only redundant app servers.      MAX 4 app servers for each component)
Not sure which one possible or not. Some case thinking system will hang need to refresh. Some case hour glass and then come back once failover complete. and some case session closed completely.
Thanks for your time and god bless the knowledge you have.
Saroj

just try to answer as much as I can (guess)
> 1. User logged in, NO ACTIVITY. I believe NO IMPACT either ASCS/SCS fail or DB fail or App Server fail.
DB failed and SCS failed won't have any impact to enduser, but if app server failed, the user session will lost, user will see a pop up error message at their SAPGUI.
> 2. User logged in and run a transaction before failover.
>      What will happen in case of ASCS / SCS
user wont'be effected during failover if user is doing nothing but idle (replica enqueue is working before failover)
>      What will happen in case of DB failover
App server won't be able to do much thing but it's work processes into reonnecting status. it should resume (reconnect to DB) when failover is compoleted. So user should be able to continue the sessions.
>    and what will happen in case of App server fail (NO High Availability, only redundant app servers.      MAX 4 app servers for each component)
user sessions in failed app server will be lost. However user should be able to logon agan if
1) logon via group, and
2) within the group, there is at least one appl server alive.
> 3. User logged in and run a transaction during failover.
hanging or
>    What will happen in case of ASCS / SCS
if the transaction is using enqueue service, for example, then user will get error message. otherwise, user won't be effected, e.g. if use is just search a list of order. user wont to able to logon via group during the failover.
You also should be pepared for user connected through message server, .e.g. http request dispatching through message server directly , or via web dispatchr. user wont be able to connect during the failover.
>      What will happen in case of DB failover
user will get error message, transaction will be aborted.
>    and what will happen in case of App server fail (NO High Availability, only redundant app servers.      MAX 4 app servers for each component)
very similar case as case 2.

How do you change user name for Icloud

We were having problems when I changed a password in Itunes and found user name on my Ipad and Iphone were old email addresses. We changed user name on Ipad and Iphone and Icloud woks fine, howerver we also have a Iac that had the old email address as the user name and now it will not sync with the Imac. How do I change user name on the Imac so it will agree with the other 2 devices?

There is no application. Go to System Preferences>iCloud, click 'Sign out'.

How to update user status in the QM notifications

Dear Experts,
PLz tell how to update/change user status in the QM notifications..I have maintained the user status profile and assigned the same to the notification type,but user status are not getting updated in the notifications..
Thanks in advance
Ankush

Hi,
SPRO - Quality Management - Quality Notifications - Overview of Notification Type.
In that select the concerned notification and click on the status profile and there you can assign the status profile for the concerned notification Type.
There will be two types,
status profile for notifications and status profile for tasks, assign as per the requirement.
Regards,
Naveen.

BAPI_ALM_ORDER_MAINTAIN - Change User Status in Operation u00BF?

IT´S POSSIBLE CHANGE USER STATUS OF THE OPERATION?
I SEE THAT FILL IT_METHODS AND IT_USERSTATUS BUT ONLY CHANGE THE USER STATUS OF HEADER ORDER.
ANY CAN HELP ME?
THANKS IN ADVANCE.

Hi,
Use the FM "ALM_ME_ORDER_CHANGE"
There you can change the operation details including the User status.
Hope this may help you.
Regards,
Smart Varghese

How to manipulate users provisions in the planning application MSdatabase

Hi All.
I want to change user provisions in the Planning Application MSDatabase without using Hyperion planning .
How can I directly use msDatabase tables and change user provisions.
which tables must be used for this operation?

İ am new in essbase and hyperion planning.
İn my test system there are alot of user. for example when i have to change some users provisions for accessing some dimensions or forms, i change provisions one by one for all specified users so it takes long times.
I want to learn that can i change provision options without using hyp planning?, forexample can i change users provisions using with my custom java apllcation.
And my system is test system so İ can restart it if it is necessary.

Is there a way the user to change the equation in the formular node from the front panel on the fly, dynamically?

Is there a way the user to change the equation in the formular node from the front panel on the fly, dynamically?

Try the Parser VIs (also known as LV Mathematics VIs, or simply GMath VIs) located under the Analyze>>Mathematics palette (not in the Base package). You might want to start with the "Eval Formual Node.vi" located in the Analyze>>Mathematics>>Formula palette. There are many differences between these G-based, dynamic formula VIs and the LabVIEW formula node, but these VIs often prove quite useful when your formula changes on the fly. For more detail on the differences, see the LabVIEW Help file (Cntrl-Shift-? from within LabVIEW) under the topic "Mathematics VIs, parser differences with Formula Node".

Is there a way the user can change the equation in the formular node from the front panel on the fly, dynamically?

Is there a way the user can change the equation in the formular node from the front panel on the fly, dynamically?

Sorry, I don't think so. That would be pretty cool if you could create a property node for a formula node and then enter a formula on the front panel and use it to update the formula. But you can't create a property node for a formula node and the only way of modifying the formula is by typing it into the formula node on the diagram. And you can't modify a diagram of a running VI.
You could create a VI which is only a formula node with the maximum number of inputs and outputs you expect. Have a button on the calling VI to Edit Formula. When the button is pressed, use a VI server to display the front panel on the formula VI, display a dialog box telling the user how to display the diagram of the formula VI, then stop the calling VI. (You can't edit a sub-VI while t
he calling VI is running). The user will then need to rerun the calling VI to use the new formula.
You might be able to do something by calling MatLab or something like that to get an interactive formula window.

I want to use the Function Generator VI to send command signals through the NI 7344 motion controller. This will be a closed loop servo valve system. I want to be able to change from say a square wave to a sine wave on the fly. Idea's?

I am going to run tests that require an actuator to move using various types of arbitrary waveforms such as sine or square. The NI 7344 is hooked to the UMI that is going through a driver for a servo valve. The loop is analog and it is closed. I have played with some of the examples but can't get it to work. I have used the function generator VI to generate a signal but I think I am using the wrong input VI to the motion control board. When I use what I have it moves the servo and then stops. It doesn't continually generate the signal.
I would love to use the controls on the function generator vi to control frequency and amplitude ect. Any help or pointer would be helpful. Thank you in advance.

Hello,
I'm not clear on exactly how you want to use the generated data but I'm assuming they will be used as your target points.
There's a built-in example for motion called 'One-Axis Contour Move.vi'. This example demonstrates how to provide your target points as 1-D array. All you need to do is to replace the input array with the output of the function generator. In order to have it run continuously, use a while loop. You can further program your application so that it'll change the waveform on the fly by monitoring the user interface but this might be little little tricky as you will need to reset the move and load the new generated points while keeping track of your current position.
I hope this helps. Let me know if you have further questions regarding this
application.
Best regards,
Yusuf C.
Applications Engineering
National Instruments

Losing Title Bar when changing Look and Feel on the fly

Hello,
I have an option in my Swing app for the user to change the Look & Feel on the fly by selecting from a radio button list. The look and feel is changed when the user make the selection, however the Windows Title Bar disappears. Any ideas what I'm missing?
private void setLook(String mode)
String lookAndFeelClassName = null;
UIManager.LookAndFeelInfo looks[] = UIManager.getInstalledLookAndFeels();
for (int i = 0; i < looks.length; i++)
if (mode.equalsIgnoreCase(looks.getName()))
lookAndFeelClassName = looks[i].getClassName();
break;
try
m_view.dispose();
UIManager.setLookAndFeel(lookAndFeelClassName);
SwingUtilities.updateComponentTreeUI(m_view);
m_view.setVisible(true);
catch (Exception e)
JOptionPane.showMessageDialog(m_view, "Can't change look and feel:" + lookAndFeelClassName, "Invalid PLAF", JOptionPane.ERROR_MESSAGE);

You are disposing the view. My guess is that this is your problem. Try creating a new one instead of just showing the old disposed one

Change user experience on the fly

Similar Messages

Maybe you are looking for