Change UserConfig via the AddOn mechanism?

Hi,
if I use the Configuration API and set a property via the method setProtperty (com.sap.ip.me.api.conf.Configuration.setProtperty) than the property is saved in the file /setting/<username>.uconfig.
The question is. Is there a possibility to overwrite the user configuration via the Add-On mechanismen during the deploymend?
As far as I can see it is only possible to change the default values wich are stored in the /setting/MobileEngine.config.
Actually, I would like to store the propteries in the userconfig file AND change same during the deploymed prozess. In our szenario we are using the configuration API in our application and we maybe will have multiple users per device. And every user need a different configuration.
Thanks,
Kai

Hai Kai
no need to change the MobileEngine.config for each device
we can do it in a generic way.
if u have the authorization to access "device_config" transaction , then ,
You can use this process to configure and monitor mobile devices. More specifically, you can configure:
The behavior of SAP MI Client Component on mobile devices
The mobile components that are to be installed on the mobile device
The mobile device itself (for example, the startup parameters and battery capacity monitoring)
The drivers installed on the mobile device
may be this link can help u.
http://help.sap.com/saphelp_nw04s/helpdata/en/84/81fb4004c7ef6fe10000000a1550b0/content.htm
Regards
Kishor Gopinathan
Message was edited by: Kishor Gopinathan

Similar Messages

Changing CardCode via the SDK DI API

Forum,
I am trying to change a BP's Cardcode via the SDK DI API that I can change if I do it via the BP Screen inside SAP, but the update method is failing on the BP object and on getting the error message it is telling that "it already exists in the following tables" but does not in fact tell which tables.
Do you if it is possible to change the Cardcode via DI API?
The reason we need to be able to do this is that Leads have a certain style of CardCode ie L009988, but on conversion to a Customer the style changes
to reflect the Customer Name ie ABC Garages may become ABC142 and this needs to be record as well in all of still active non-SAP systems these are used to raised Invoices and Credit Notes.
Regards,
Juan

Once there is a transaction against a CardCode, it cannot be changed.

Migration Assistant created new account to deposit all my stuff, but I can't access that account, even after changing the password via the main acct'

I am at my wits end. The migration assistant created a new profile (I didnt konw that it would do this) and now I can't get into that profile with all the stuff from my old PC.
I have tried changing password via the main account, but to no avail. I have researched issues with Keychain, but all it tells me to do is change the login password - that doesnt work either - I cant get to all my files.

Migraine Assistant it's called.
Delete the account from the main one, create a new account and transfer files manually via a regular FAT external drive you pickup at any office or computer store, Mac's can read it.

I backed up my iphone 4 and did an upgrade and changed my Apple ID and password but my phone has not recognised the new ID to upgrade my apps via the iphone.

I backed up my iphone 4 and did an upgrade and changed my Apple ID and password but my phone has not recognised the new ID to upgrade my apps via the iphone. How do I get rid of the old Apple ID when it comes to upgrading apps.
I have been into setting>store and signed out and signed back in and it still asks for old ID and password.

Everything you've had up to now has been tied to your old Apple ID. You cannot switch it over to a new Apple ID. You should contact iTunes support to help you with this:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site.
For Mac App Store: Mac App Store Customer Service.
For iTunes: Apple Support for iTunes - Contact Us

HT5621 Two days ago I changed my apple id. Itunes recognizes my new apple id when I access itunes via the computer. when I try to make a purchase or update my apps on my iphone, it asks to give the password to the old apple id. How do i change it on my

Two days ago I changed my apple id. Itunes recognizes my new apple id when I access itunes via the computer. when I try to make a purchase or update my apps on my iphone, it asks to give the password to the old apple id. How do i change it on my iphone?

Apps and music are forever tied to the Apple ID under which they were purchased. If you don't want to continue to get that message, delete the apps and purchase them again with your new Apple ID.

Ps cs6 on mac. since installing yosemite, when working on an image if i want to change tool, via shortcut of wacom pen click, i now have to click on the image title bar, how can i fix this please?

ps cs6 on mac. since installing yosemite, when working on an image if i want to change tool, via shortcut or wacom pen click, i now have to click on the image title bar, how can i fix this ?

@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson

Is there any way to verify that your installed plugins are up to date without using the Plugincheck page via Tools/AddOns/Plugins/Find Updates ?

I installed Firefox 3.6.13 on a new computer and updated the plugins via the Plugincheck page. Now when I visit the Plugincheck page, it says "No plugins detected" although several plugins are installed as indicated in the Addons dialog box and About:Plugins page. The Plugincheck page used to show all the installed plugins and flag them as either up to date, out of date, or unable to detect the version.

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

OK, the videoformat may be changed (PAL, NTSC) by plugin a specified cable, but how can I force to have PAL-format instead of NTSC to be send to iMovie via the USB-cable?

OK, the videoformat may be changed (PAL, NTSC) by plugin a specified cable to be connected the iPhone to the TV, but how can I force to have PAL-format instead of NTSC to be send to iMovie via the USB-cable? Al this transcoding afterwards takes a lot to much time. Is there a solution before sending the clips?

Well, thanks a lot. iMovie '11 is similar, but not identical and unfortunately I don't seem to find any "Frame Rate Pop-Up menu" when I generate a new Project. Do not find an "Aspect Ratio Pop-Up" either. Also the help does not speak of this options. I just have to choose a Theme and that's it. Also the "Settings" Menu for the Film does not help.
I also checked the general settings for iMovie:
So I would dare say, there is actually no possibility anymore, to set the output format. And also when I create the output file, there is nothing more than a short list of resolutions.
I do not understand why all options were taken away. I admit, I am a little disappointed.
Best regards
Claudio

Since 2012 I have Photoshop Elements always worked without any problem, however now the language is suddenly German how can this be changed, removed the program and re-installed, not working. Program is downloaded and updated via the apple app store?

Since 2012 I have Photoshop Elements always worked without any problem, however now the language is suddenly German how can this be changed, removed the program and re-installed, not working. Program is downloaded and updated via the apple app store?

I've done some research on the SQLite database. Whenever Aperture hangs up (like during auto-stack or opening the filter hud) there are thousands of SQLite queries happening. These SQLite queries cause massive file I/O because the database is stored on the disk as 1kb pages. However, the OS is caching the database file; mine's only 12MB. I'm trying to track down some performance numbers for SQLite on osx but having trouble.
It's starting to look like most of the speed problems are in the libraries that Aperture uses instead of the actual Aperture code. Of course, that doesn't completely let the developers off the hook since they choose to use them in the first place.
Oh, and if anyone is curious, the database is completely open to queries using the command line sqlite3 tool. Here's the language reference http://www.sqlite.org/lang.html
Hmm, just found this. Looks like someone else has been playing around in the db http://www.majid.info/mylos/stories/2005/12/01/apertureInternals.html
Dual 1.8 G5 Mac OS X (10.4.3) 1GB RAM, Sony Artisan Monitor, Sony HC-1 HD Camera

Changing user profile attributes via the admin console

Hi all,
I created my own login module (like the existing Membership module) which
extends the Login class. It works just fine, and can create user profiles
and allow people to log in. When I log into the admin console and try to
bring up the user profile to edit the attributes for this module [Manage
Domains->(domain)->(role)->Users->(user)->Authentication(authentication
module)] it displays an error stating 'This profile contains no data which
can be administered.' It also does this when I create a user via the admin
console. I know the profile exists (the user can log in, and doing a
'ipsadmin get user (user)' produces the profile). In the login module XML,
all the necessary attributes are set as "userConfigurable=TRUE" with the
right privileges. Looking at the Membership module as a template, I saw it
puts a configuration file in the '/opt/SUNWips/locale' directory which is
used apparently for editing the profiles created by this module. I made a
similar one for my module, but the same error occurs. Does anyone know what
I am failing to do?
Thanks,
Mark

Hi,
After creating your own Authentication module You have to import your "iwtAuth[NewModule].xml" to the profile server.
You can find a sample file for Membership module
" iwtAuthMembership.xml" at "/etc/opt/SUNWips/xml".
Modify "iwtAuthMembership " in the above xml file with "iwtAuth[NewModule] "and import the
"iwtAuth[NewModule] .xml" using
# ipsadmin -import iwtAuthNewLogin.xml
and restart the server.

[svn:fx-trunk] 12912: With TLF 571 checked in we can now revert the MXML 2009 changes for how the id language attribute is processed .

Revision: 12912
Revision: 12912
Author:   [email protected]
Date:     2009-12-14 12:08:35 -0800 (Mon, 14 Dec 2009)
Log Message:
With TLF 571 checked in we can now revert the MXML 2009 changes for how the id language attribute is processed.
An unqualified id property will no longer be seen as a setter for a normal public, writable, non-static "id" property - which matches Flex 3 behavior.
As in earlier versions of Flex, the mechanism to retain MXML id attribute information at runtime is to implement mx.core.IMXMLObject. The compiler will generate a call to the intialized() method and pass in the id information.
Note: One exception to this rule seems to be UIComponent which instead get id attribute information via mx.core.IDeferredInstantiationUIComponent (although there seems to be a TODO in the codebase to remove this mechanism and thus should not be relied on by third parties).
QE notes: Please add tests for the TLF id property on flow elements (div, span, p, etc).
Doc notes: Please check that we have not documented
Bugs: N/A
Reviewer: Paul
Tests run: Checkintests, local test cases.
Is noteworthy for integration: Yes
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/FrameworkClasses.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/core/SpriteVisualElement.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/GraphicEleme nt.as
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/ComponentBuilder.jav a
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/StandardDefs.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/Type.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/TypeTable.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/init/ValueInitializer.ja va
Removed Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/IID.as

This is a duplicate post. This should be locked to avoid further confusion.
My CSS wont change
Nancy O.

Error: Windows Vista failed to start. A recent hardware or software change might be the cause

PLEASE HELP!
My Lenovo SL500 is not working at all - I get error: "Windows Vista failed to start. A recent hardware or software change might be the cause"
I tried the following on my Lenovo:
Windows repair menu = "windows cannot be repaired"
Lenovo Rescue and Repair
Rescued my files from Hard-drive (copied to external hdd)
Restore System = Failed
Diagnose hardware = HDD passes all tests
Don't know what else to do with = Boot from another device ? Access BIOS?
Because I do not have the windows vista install disks
I purchased and downloaded the recovery disks from neosmart.net
The neosmart windows vista recovery disks DO NOT WORK = Error is "Unable to find any valid Windows partitions on this computer".
The Hard-drive exists because I was able to back-up files from HD through (Lenovo Rescue & Recovery Rescue files). So there is a hard-drive.
I don't know what to do next?
Last resort is to Factory Restore via either the Lenovo R&R or Windows Vista Recovery Disks (neosmart)?
Will I still have windows?
PLEASE HELP!

Hi, Josemne
Yes, if you can restore the system through Rescue & Recovery, then you will still have WIndows on your machine, but all your files will be deleted from the hard drive. Luckily, you have already saved those files elsewhere. I would recommend trying to restore the system and see if that works.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Connecting my MacBook Pro (early 2011) to my Sony LCD TV (KDL-46XBR6) via the Mini DisplayPort and listening to Multichannel surround sound.

Dear all,
I am attempting to connect my MacBook Pro (early 2011) to my Sony LCD TV (KDL-46XBR6) via the Mini DisplayPort to HDMI. I have successfully connected the two devices and can select "SONY TV XV" in the sound preference pane. I can see and hear what I'd like, however, I can only monitor the sound in 2 channel stereo. I have my TV connected to a Sony 7.1 audio receiver via an optical cable and can monitor 7.1 sound via other sources (Blu-ray, broadcast, etc). When I go into the Audio Midi Setup utility, I am unable to configure my speakers to be anything but 2 channel stereo. I am given the options for "2ch-16bit", "2ch-20bit", "2ch-24bit" and "Encoded Digital Audio". When I select "Encoded Digital Audio", my output automatically changes to Built-in Output. Has anyone been able to successfully resolve this issue? Thanks for all your help!
Gregg

I have tested it with the Moshi (http://store.apple.com/us/product/H1824ZM/A/moshi-mini-dp-to-hdmi-adapter-with-a udio-support) and Belkin (http://store.apple.com/us/product/HA342ZM/A/belkin-mini-displayport-to-hdmi-adap ter) adapters, both purchased from the Apple Store with no such luck. Have you or anyone else had success with any other third-party adapters?

The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

ColdFusion 11: allowedextforinclude functionality has changed. But the docs haven't been

G'day:
I am reposting this from my blog ("ColdFusion 11: allowedextforinclude functionality has changed. But the docs haven't been") at the suggestion of Adobe support:
@dacCfml@ColdFusionCan you post your queries athttp://t.co/8UF4uCajTCfor all cfclient and mobile queries.— Anit Kumar Panda (@anitkumar85)April 29, 2014
This particular question is not regarding <cfclient>, hence posting it on the regular forum, not on the mobile-specific one as Anit suggested. I have edited this in places to remove language that will be deemed inappropriate by the censors here. Changes I have made are in [square brackets]. The forums software here has broken some of the styling, but so be it.
G'day:
Remember this one: "ColdFusion 11: preventing files from being included? [WTH], Adobe?". I can confirm this verymoderatelyslightly contentious feature has been changed in ColdFusion 11, but the docs have not been updated to reflect the change.
The issue is summarised thus (from the article linked-to above):
[...]out of the box ColdFusion 11 will only allow the inclusion of CFML and HTML files. Why? They cite "for security reasons". Here's a quote (posted in the bugtracker, originally from the pre-release forums):
"Vamseekrishna Manneboina: Yes, this was done as part of a security measure. You can now only include CFM/CFML files by default. You can specify additional extensions via a property called allowedextforinclude in neo-runtime.xml. By default, HTM and HTML file extensions are already added to this list/property, thereby allowing for inclusion of HTM and HTML files too by default."
OK, I disagree there's merit in this, some others agree, others disagree. But... so be it. I actually thought - if I was in a charitable mood - that the people that were "for" this change made a reasonable case for its inclusion, so - whilst not agreeing with them - I was content to just shrug and go "yeah, oh well".
Now this feature is still in the docs: "New in ColdFusion 11 - Restrictions", but this is not the way it now works. Initially I thought it had been removed completely (and I am now in the midst of retooling this article from saying that... as I only worked out what was going on 2/3rds of the way through writing it).
I did a secure install the other day, and one of the first things I tested was this:
 <cfset message = "before"> <cfoutput> #message# <cfinclude template="code.inc"> <cfset message = "after"> #message# </cfoutput>
 <cfset message="within"> <cfoutput> #message# </cfoutput>
And this all runs fine, as one would expect:
before
within
after
Next I checked neo-runtime.xml to see if the settings had been augmented to switch this off by default: but I'm buggered if I can see any reference to it anywhere.
So I then checked ColdFusion Administrator to see if there was any hint of it there, as this was one of the things Adobe said they were going to do in their solution to this. And there it is:
So by default now, anything is allowed. I figured I must have missed the setting in neo-runtime.xml, so changed the setting to "FOOBAR" so I could easily spot it, and there it is down @ /wddxPacket/data/array/*[16]/var[@name="compileextforinclude"] in neo-runtime.xml:
<var name="compileextforinclude"> <string>FOOBAR</string> </var>
And - having changed it back to something sensible: CFM, then the feature now "works":
before
#message#
after
However this is probably a worse security hole than the one they were trying to fix! It looks OK when looking at the render in the browser, but look at the actual raw mark-up:
before <cfset message="within"> <cfoutput> #message# </cfoutput> after 
We have unparsed CFML source code sent to the browser. This is awful. What if someone switches this on, and doesn't spot one of their old includes which has less-than-trivial CFML in it? It's now publicly accessible. Adobe have created a feature which has the possibility to leak source code to the outside world. How is that a security feature?
Also interesting is that with the super-secure profile installed, this is still off by default? I would have thought it'd be on in this case?
I still don't think this feature has been implemented properly, and it all still points even more to the fact the Adobe ColdFusion bods don't really know what they're doing.
Anyway, I'll nudge Adobe to at least get the docs sorted out.
Time for work (3min ago)...
Adam

Hi Adam,
Regarding "What if someone switches this on, and doesn't spot one of their old includes which has less-than-trivial CFML in it?", yeah I agree that'd be a problem. Hmm, maybe both this.allowedextforinclude *and* this.compileextforinclude should've been supported (instead of replacing the former w/ the latter as was done)? Example:
this.compileextforinclude="cfm,cfml,inc";
this.allowedextforinclude="cfm,cfml,inc,txt";
That way an exception could be thrown if cf|included file's extension wasn't in the this.allowedextforinclude list.
Perhaps the above could be shortened to:
this.compileextforinclude="cfm,cfml,inc";
this.allowedextforinclude="txt";//implicitly includes * from this.compileextforinclude (since -compile- implies -allowed-)
Dunno if that'd be confusing.
Anyhow, just some thoughts..
Thanks!,
-Aaron

Change UserConfig via the AddOn mechanism?

Similar Messages

Maybe you are looking for