Change validity period of cost center from 2009 to 2008

Hi All
I have created a cost center with validity period 01.04.2009 to 31.12.9999 which was supposed to be created from 01.04.2008 to 31.12.9999. when trying to change the validity period in Tcode KS02 I am getting the following message -
"New analysis period must not exceed maximum period limit". In TCode -  OKEON the validity period button for that particular cost center is deactive. 
In TCode KS13 when I generate report for that cost center with Parameters - Valid from 01.04.2008 to 31.12.999 I can see that the cost center is valid from 01.04.2008 to 31.12.9999.
In TCode KS03 Display Cost Center the cost center is valid from 2009 which has to be valid from 2008. Please advise on how to change the validity period from 2009 to 2008.
Regards

Hi Eli
Thanks for the reply and I have successfully created the cost center to be valid for the previous year as per the requirement.
Thanks & Regards
KIMKhan

Similar Messages

  • Change Validity Period of Cost centers ??

    Hi,
    Is it possible to change the validity period of cost centers ??, like in my case we are having validity period until 12/31/9999, so because of this even when some one blocks the cost centers they still appear in the F4 list of cost centers!!! used at many places to search for cost centers.
    My requirement is to restrict the blocked cost centers from appearing in the search help list for cost centers.
    Thanks.

    Hello Rahul,
    Validity of cost centers can be changed in transaction OKEON : Standard hierarchy of cost center change.
    Select your cost center, In basic data tab you can change the validity dates.
    This should help.
    Thanks
    Ashutosh

  • How to change validity period of cost centre or activity type

    Hi
    How to change validity period for an Activity type or Cost centre?
    Can we change the validity period once created?
    regards
    Prakash

    Please note this can be done.
    Go to Edit Cost Center
    Goto Edit, Analysis Period.
    Create a new validity period say today until 3112999
    Change the data you want and save.
    When you go into the CC again it will show two validity periods.

  • Urgent:How do i change the validity period of cost element !!!!!!!!

    How do i change the validity period of cost element like:
    From 03/01/2008 to 01/01/9999
    To 01/01/2000 to 01/01/9999
    Please help me.I will assign you points.Thanks in advance.

    hi,
    pls go to t.code ka02 and select that particular cost element and go to menu bar and select edit -analysis period and select other analysis period there we can change
    if it is useful to you pls assign the points
    Thanks & Regards
    phaneendra

  • Multiple Analysis Period in Cost Center Master Data

    Hello  Experts
    My client did the mass change of cost center master data through T.Code KS12.  Here, few of the cost centers analysis (validity period is different) like cost center X - analysis period was 01.01.2008 to 31.12.9999, & Cost center Y - analysis period was 01.01.2011 to 31.12.9999.
    Since he did the change (through T.Code KS12) w.e.f 01.01.2011 to 31.12.9999, few of the cost centers created the mutliple analysis periods at cost center level ( i understand this is SAP standard behaviour)
    Now, if he choose the display of cost center - X through KS03, he is getting two analysis periods
        (a) 01.01.2008 to 31.12.2010
        (b) 01.01.2011 to 31.12.9999
    However my client does not want to see two analysis periods in cost center master data.
    Kindly advise is there any SAP standard procedure to revert back / SAP note which can coorect the same
    Regards
    Anil Kumar

    If there are no postings during that analysis period you can delete the same if not required to avoid the message.
    I will test the same if any other solution is possible.
    Regards,
    Divraj

  • Can we change the date of cost center

    Can we change the date of cost center with we have already created????????

    Hi Shivika
    Changing a date can mean many things.. Example - You created a CC from 01.01.2014 to 31.12.2015
    If you want to have the Validity from 01.01.2013 now, create the CC from 01.01.2013 to 31,.12.2013 from KS01
    If you want to extend the validity till 31.12.9999, again do the same.. KS01 -> Create from 01.01.2016 to 31.12.9999
    If you want to shorten the validity i.e. say, You want the CC to be valid from 01.01.2015 instead of 2014, then you can delete the CC from KS04 for 2014 provided no data is posted (plan or actual)
    Br., Ajay M

  • How to change company code in cost center master

    Hi,
    Can anyone throw me the light about how to change company code in cost center master? User make some mistake. They maintained wrong company code in cost center master and there are some transactions already posted to this cost center. I would appreciate all attention and point will be reqard. Thanks much
    Best Regards,
    Bird

    Hi,
    The cost center master data fields have time dependancy.  Following are the details of time dependancy.
    You can maintain master data for cost centers, cost elements, activity types, and business processes as time-based. Changes to any other time interval are possible at any given time. Data storage is also time-based. In this way, you can store multiple database records for a master data record, each holding different information.
    The time-based dependencies are determined by SAP and cannot be changed. The following dependencies are possible:
    Not time-based
    Day-based
    Period-based
    Fiscal Year-based
    Cost Center's company code field's time based dependancy is Fisal Year Based and hence, the company code can be changed on cost center only on new fiscal year.  And hence, system will not allow changing company code on cost center master data until new fiscal year if transactions are posted to the cost center.
    You may have to think of work around :
    1) Create new cost center with correct co code
    2) Repost the cost posted to old cost center (with wrong co code) to the new cost center.
    Explore the possibility of this work around on your system with the key user and then see whether this option works out.
    Hope this helps.  Pls. assign points if this is helpful.
    Regards,
    Chirag

  • How to change purchase order's cost center in batch

    Dear all :
    how to change purchase order's cost center in batch?

    Dear Manish :
    thanks so much for you reply.
    the filed which i wanted to change it's content is cost center (KOSTL) in table EKKN.
    i couldn't find it in this t-code when i select fields.

  • How to derive Cost  center from Funds Center

    Hi,
    i post a GR (Return item) and i have a difference of price, i want to assign this difference (assined to a Gl Account)  to a Cost center please how to do that ? i have a Funds Center entered in this GR, can i derive the cost center from this Funds Center ?
    Please Help.
    Regards.

    Hi,
    There is no 'derivation' funcitionality as such available. Thoough, you can build a CO substitution via OKC9 and, based on your fund centre, set the cost centre value.
    Regards,
    Eli

  • Derivation of Cost Center from WBS element MAster data at the time of invc.

    dear all,
    during invoice postings with wbs element account assignment system do not derive assigned cost center from wbs element master data.
    how can the system derive the cost center automatically??
    Is there any BADI available to this issue.
    regards
    saqib

    Dear,
    WBS is Real and cost center in the master data is for statistical postings i.e. responsible cost center in WBS.
    How to make substitution (OKC9) deriving the cost center in document line items / invoice posting etc.
    Kindly give detail process for its configuration steps and is there any BADI available which can be useful in this regards?
    Regards,
    Saqib Usman

  • How to get Function Area (or Cost Center) from COSP ?

    Dear experts,
    I am new to FICO and here is one question need your help:
    Now I have table COSP, can anybody let me know how can I get Function Area through joining some other table?
    Or how to get the cost center from COSP, since I know then I can go to CSKS to find the function area.
    Any post would be appreciated and thank you all in advance!
    Tim
    Edited by: ctsiszidane on Feb 12, 2011 4:07 AM

    Ajay,
    Thanks for your reply.
    Actually this is a requirement for our BW system. I checked all the records to find their OBJNR start with "OR", but we need to get the function area information. Do you know how can I get that?
    The link below listed all the fields we have on BW side, actually it has function area, but it returns blank, we tried to apply one OSS note in the source ECC system, but still no value returned for this field. So we have to find another way to get the function area.
    http://help.sap.com/saphelp_em70/helpdata/en/29/5f4cf98c9141488cda37e173549834/content.htm
    Point has been assigned to you and thanks for your time in advance!
    Tim
    Edited by: ctsiszidane on Feb 12, 2011 6:39 AM

  • Changing approver for home cost centers from manager to cost center owner

    Hello,
    Our CfTE system is functioning as follows: "If traveler belongs to home cost center then the expenses are not sent to cost center owner, instead they are sent to travelers manager".
    I guess this is setup to prevent fraud and the ability to authorize your own expenses.
    Anyway, is it possible to change this to always the cost center owner approving the expenses, regardless of home cost center or not?
    Thanks for your help.

    No, this is not defined in the Business Configuration. The admin-user needs to have the WoC 'Application and Usermnagement' and there go to view 'Approval Processes', here you can copy the exitiong approval process defintion and create a new one. The new one needs to be set to active then. For detailed docuemntation and how-to change the approval process defintion, please check the help center about 'Approval' in your system.

  • Change business are in cost center

    Hi
    How to change business are in the already created cost center ???? Pls advice
    Thanx

    Hi
    SAP note 62716 covers this process to change BA if data already exists:
    I have copied below in case you dont have access to notes:
    Symptom
    When you attempt to change the company code or the business area in the master record of the cost center, the system displays message KS020 or KS134 because dependent data already exists, or the system displays message KS021 because the change interval is not set to the year limits.
    Enhancement: As of Release 4.6C the report RKACOR06 is enhanced so that you can also change the master data from business processes (CO-ABC, Activity Based Costing) correspondingly.
    Reason and Prerequisites
    For actual postings, the company code is updated in the document. It is therefore not possible to change the company code of the participating account assignment (for example cost center) later on.
    The checks for dependent data, however, are carried out on year level. For this reason, it is not possible to change the company code or the business area during the fiscal year.
    Solution
    Using report RKACOR06, you can also make changes to the company code and the business area in the master record of the cost center during the fiscal year if the following requirements are met:
    1. The change interval is set to period limits
    2. There is no dependent actual transaction data in the change interval or afterwards.
    3. There must already be an analysis period for the respective cost center which starts on the first day of the chosen period. If this is not the case, you can create one with 'Change cost center' - KS02 (for example, by changing the cost center manager).
    If the system contains dependent planning data in a plan integrated version, any respective profit centers and extended general ledgers that exist must be restructured. For profit center accounting, you can use Transaction 1KE0 for this purpose.
    Caution! If you change the company code of a cost center, a reversal of a posting in a different period can no longer be carried out if the cost center is assigned to another company code in the reversal period.
    Report RKACOR06 is contained in the standard system as of Release 3.1I.
    For prior releases, you can download the report from the FTP server sapserv3 from the directory /general/R3server/abap/note.0062716.
    Report RKACOR06 does not generate any change pointers. Thus, if you want to send the change of cost centers via ALE, use Transaction BD16.
    If you cannot change the BA for some other reason, please provide details.
    Regards, Elaine

  • How to extend the validity period of Cost estimate

    Hi Gurus,
    The validity period of Standard Cost estimate is up to the end of fiscal year. how can we get the same Cost estimate from the begining of new fiscal year.
    for example let Materila X, which has 550 as a Cost estimate.the validity period of this cost estimate is up to 31/03/2009. now i want same cost estimate for Material X, from 01/04/2009  on wards.
    is it possible to get the same cost estimate from the 01/04/2009 or Do I need to run CK11N, CK24?
    can anybody help me.
    Thanks&Regards
    Prareddy

    hi,
    If you want to get the same cost estimate for future use. You have to create a new cost estimate using the Dates as below
    Costing date from :01/04/2009
    Costing date to :Any date you desire (preferably end of 2009 financial year)
    Qty structure date: As of your previous cost estimate for the material X
    Valuation date :As of your previous cost estimate for the material X
    Using this procedure you will have the old costs ie 550 in the cost estimate but will extend the same to as long as you desire.
    Revert back for more information
    Thanks

  • Is it possible to change Company Code in Cost center, once postings done?

    Hello Friends - We have Cost center created in CoCd 0001 and made the postings and this year beginning CoCd in Cost center was changed from CoCd 0001 to 0002 for some business reasons. Now, User says that he needs to post one journal to this Cost center in CoCd 0001. As this Cost center is in another CoCd, It cannot be used in CoCd 0001.
    Please suggest me that if it is possible to change and the process to change the CoCd in 0001. Once journal is posted, we will put it back 0002.
    Thanks

    Hi Hoysala,
    Please refer to the following note Note  62716.  These three prerequisites must be met:
    1.  The change interval is set to period limits
    2.  There is no dependent actual transaction data in the change interval or afterwards.
    3.  There must already be an analysis period for the respective cost center which starts on the first day of the chosen period. If this is not the case, you can create one with 'Change cost center' - KS02
    (for example, by changing the cost center manager).
    You may use transaction code rkacshow to check the transactional data that exists on the affected cost center, in order to change the company code, all these data should not exist for the time
    interval.
    Regards,
    Jose

Maybe you are looking for