Changed content location on install

Hi,
Please excuse the re-post from the other area in this forum, I didn't get any action on that at all. WIll one of the Guru's please chime in?
Just installed FCP 7 suite.
Using a 100GB ssd apps drive so I decided to install the templates and all the extra soundtrack content on my big raid where there is plenty of space.
Issue:
My templates aren't attached to the DVDSP software. I believe the motion templates are just fine but for some reason the DVDSP buttons, templates etc. are all not linked. I tried to go into preferences and a few other things but couldn't see where to link the content together.
Please help. _*I know now that I have enough space to install the templates so I wonder if I could just drag and drop the content into a spot on the apps drive where DVDSP could "see" it.__*
I thought of putting this in this area because it was more of a suite related install issue.
Thanks to all in advance
Mike

I believe that FCS maintenance from Digitalrebellion.com will take care of you. Try the free trial.

Similar Messages

I CAN NO LONGER SYNC ANY OF MY APPLE PRODUCTS, WHEN I ATTACH THE I-PAD TO THE COMPUTER VIA USB IT DOES NOT TRY TO CONNECT TO THE PRODUCT, I HAVE CHANGED CORDS, USB PORTS LOCATIONS, RE-INSTALLED I-TUNES. THIS STARTED AFTER MORE RAM WAS ADDED

I CAN NO LONGER SYNC ANY OF MY APPLE PRODUCTS TO I=TUNES, I HAVE CHANGED CORDS, CHANGED USB LOCATIONS, TRIED DIFFERENT ((I-PAD, I-PHONE) AND NONE WILL TRY TO SYNC. I HAVE RE-INSTALLED I-TUNES. NOTHING WORKS. THIS STARTED WHEN RAM WAS ADDED TO COMPUTER.

Hi, can you take the RAM out and try again? Sounds strange that RAM would cause this.
What computer type are you using and what OS?

How can I change the install location when installing an App (i.e. Lightroom) from Creative Cloud?

How can I change the install location when installing an App (i.e. Lightroom) from Creative Cloud?

Rolfjuelg I am sorry but Lightroom does not support custom installation locations through the Creative Cloud. You can find more details at Lightroom and Creative Cloud FAQ.

Every time I want to download itunes 11, I keep getting a network error. I have tried changing my location but every time, I get a network error. I have been able to install itunes 10.7 without a problem. How do I fix this?? Help!!

I recently updated my ipod to iOS 7. Now that I have done this, my itunes needs to be itunes 11. I have been able to download itunes 10.7 but now I need an upgrade. Every time I go to update it, I get a "Failed-Network Error" message. I have tried changing my location and networks but I still get the same message. I really need to download itunes 11 inorder for my ipod to work with the itunes. How do I fix this problem?? Help!!!

I had the same problem and tried restarting my computer. It configured windows updates for a while, then iTunes downloaded successfully. Hope this helps!

I am trying to install FF on a thin client, and need to change the location the installler extracts the temp files to as the disk is not big enough.

Is there a pre extracted version of the installer or a way of specifiying where the installer extracts itself to?

If Firefox on Windows is using the current temp folder then you need to change the location of the temp folder via the %TMP% and %TEMP% environment variables.
*Control Panel > System > Advanced > Environment variables
*Right-click My Computer > Properties > Advanced > Environment variables

I installed the upgrade with icloud but now i go to settings to changed the "location serives" it won't allow me to turn it "on" ..i can i change this?

i need up in changing the "location serivces" in my settings..it doesn't allow me to change it.

If they are no longer in your camera roll, save them to your camera roll before deleting the account (open your my photo stream album, tap Select, tap the photos, tap the share icon -- box with upward pointing arrow, the tap Save to Camera Roll).

Just put my i-tunes library on a 2nd hard drive, how do I easily change the location where the program looks for current songs from the C:/ drive to the new drive without going thru each song individually in the "get info" tab

I just installed a new hard drive and transfered my i-tunes library to the new drive. How can I make a bulk change of the location the program looks for the current songs. I know you can do it song by song from the "get info" tab but I need to do it for all 4500 songs. I have already changed the location that new files are stored to the new hard drive.

The pop-up lets you connect to the library file, iTunes Library.itl, on the external drive. This will, in turn, automatically update the preference for the iTunes Media folder to be the iTunes Media or iTunes Music folder inside the iTunes folder on the external drive and it will update the locations of all the content inside the media folder so that it uses the version on the external drive.
This works seamlessly if all iTunes content was inside the iTunes Media (or iTunes Music) folder (which was itself inside the iTunes library folder) before you moved/copied the iTunes folder. For content outside the iTunes Media folder iTunes should remain connected to the original location. These files should be consolidated (before or after the move/copy) and in addition, if available the library should be upgraded to the newer layout which places iPod Games and Mobile Applications inside the media folder instead of the library folder. (File > Library > Organize Library...)
For split libraries there are methods to rejoin them before moving (preferred) or repairing after the fact (e.g. my script) which I can go into if needed.
tt2

Hi, I have moved to India from france and I am trying to update my payment options to the Indian visa card but it seems that no matter what I do I cant do it. I dont want to create a new ID..Plz Help!!!Just want to change my location and my payment detail

Hi, I have moved to India from france and I am trying to update my payment options to the Indian visa card but it seems that no matter what I do I cant do it. I dont want to create a new ID..Plz Help!!!Just want to change my location and my payment details!! thanks in advance!!

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then seeRecover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

I have a similar issue - my iPod nano connects and is visible in Device Manager yet invisible in My Computer and iTunes. I've tried everything I can possibly think of to try and solve this myself, all in vain.
Mine is a nano 4G. I've been using it for quite some time without the slightest problem. I have been using WINAMP instead of iTunes to manage my darling nano.
Then, one fine day I bought a new computer and the nano would not show up in My Computer, though the nano display shows "Do not disconnect". On my old computer it worked (and still works) absolutely fine with win XP as well as with win7 (the later I currently use on my new/problematic computer, which I bought last summer and that's how long I've had this problem).
Of course, after several first attempts I gave up and installed iTunes. I've tried using the Apple support article "iPod not recognized in 'My Computer' and in iTunes for Windows":
- reset
- fully charged,
- cable works fine on two other computers
- in normal or disk mode makes no difference
- tried to find anything useful in the diagnostics mode
- reinstalled iTunes several different times since then to the latest version
- I've unplugged every other USB device except for my mouse and keyboard and tried several different USB ports on my motherboard (USB 3.0 and conventional), as well as trying different USB- related options in my BIOS.
- I've never used any Mac with this ipod
- I've tried fiddling with the win7 Services by stopping and restarting them and of course
- uninstalling the iPod drivers in Device Manager. After such an uninstall the ipod would automatically be recognised and "ready for use", i.e. being invisible in My Computer.
- Attempted to find any possible third-party conflict with msconfig or the possibility that my ipod is being confused for a network drive (for which I've disconnected my HDD, leaving only my SSD with the OS).
Sometimes, iTunes would note that iPod service (or something, can't remember exactly) failed to install properly and asked to try and repair it. I would click YES! and voila - no change! The ipod would rarely show up in iTunes on my problematic computer like this:
iTunes would warn me that the nano would need restoring so I would try and do it on my haunted machine upon which iTunes would freeze like you seen in the picture.
Despite this, I've updated and restored the nano on my father's computer to the latest version without any problems. This though, did not solve my problem in any way.
I can load music to my nano through my old computer (which for me is a real pain and hassle) and the gadget works normally in terms of its disconnected functionality.
I've taken my nano to the local service for repair and they said it was fine. Mercifully, they didn't charge for the diagnostics service (gee, thanks for not ripping me off!).
Here are two screengrabs from my Device Manager
and Devices and Printers screens on my comp:
That is my sad story as far as I can remember. It's most likely something with the drivers or something along those lines though I'm out of ideas at this point.
If you think you have any idea PLEASR HELP, I'M DESPERATE!

HT201272 i downloaded a free app and then deleted it it is in the app store when i click on it it says open and tap again it goes to another screen tap on it it changes from free to install but doesnt do anything

i installed a free app and then deleted the app. under apps the app is still listed and says open, but when i tap on that it goes to another screen and when i tap on open it changes to free when i tap free it changes to light green install and tap again goes to all green install and what do i do then do not see anything to click on to make it install. what am i doing wrong. this is for a iphone 5s

The 'open' indicated that the App Store though that it was still installed on your phone.
Have you tried closing the App Store app via the phone's multitasking bar and seeing if you can install it after the phone has restarted ? Double-click the home button to open the taskbar, and then swipe or drag the App Store app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar. You should be able to redownload the app by tapping on the cloud icon next to it in the Purchased tab in the App Store app
If that doesn't fix it then you could try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

Change content-disposition in email attachment

I am using apex_mail (in Apex 4.1) to send emails with an attachment.
v_mail_id := apex_mail.send(
         p_to => '[email protected]'
         ...etc...
apex_mail.add_attachment( p_mail_id    => v_mail_id
                         ,p_attachment => v_image
                         ,p_filename   => 'signature.jpg'
                         ,p_mime_type => 'image/jpeg');
Apex creates this as an attachment:
Content-Disposition: attachment;
I would like to change it to inline:
Content-Disposition: inline;
so I can reference it in my email body with <img src="cid:signature.jpg"/>. Well... I hope it is going to be shown inline anyway if I change Content-Disposition.
Currently (with Content-Disposition: attachment;) it works for Outlook, but, for instance, not in Gmail in the browser. Gmail shows the image separately as an attachment.
Is there a way to change the content-disposition with Apex?
I know it is possible to do it with utl_mail, but this is currently not installed in our databases. I need to involve our DBA to set this up, and I don't know if he is willing to do that.

Hi Joel,
I thought so. I will put this in the Apex feature request database.
Ino
BTW, for other people it might be interesting to know that there is another option I tried that doesn't work in many situations either. You can put this in the email body:
<img src="data:image/jpeg;base64,'||v_image_base64||'"/>
where v_image_base64 is the base64 encoded jpg image.
From my experiments the inline attachment with a cid reference seems to work best.

Internet or Intranet Clients - Content Location

Our current Configuration Manager 2012 R2 environment is running with existing servers and clients in intranet mode. We are wanting to add a server in our DMZ to support internet only mode for our DMZ servers. Additionally, we are contemplating leveraging
this new server to support laptops in an "Internet or Intranet" configuration as described here:
https://technet.microsoft.com/en-ca/library/bb693755.aspx
My question is regarding content location for these "Internet or Intranet" clients. If the client is offsite (so the intranet servers are viewed as offline) and the content is available on the server setup to support internet clients, obviously
the client will download the content from the internet server. However, should we be distributing all of the content that is available to the intranet servers to the internet server? If an "internet or intranet" client receives policy
for a package who's source is only available from an intranet server does the deployment completely fail when the client is offsite....or does the client wait until the content is available from an intranet server?
Also, if you have a link to documentation of this, that would be great.
Thanks!

There's no documentation describing this exact scenario. The client sends a content location request to its MP but if the necessary content is not on the Internet facing DP when the client is connected via the Internet, then the content location
request will fail. The client will periodically retry the content location request including when the client sees that it has changed network locations and so this will eventually succeed once the client is on the Intranet again. So, effectively, yes
the client will wait till its on the Intranet -- it doesn't really have a choice though.
What implications are you worried about here?
Jason | http://blog.configmgrftw.com | @jasonsandys

Content location mass update at the site level

Hi,
I am looking for a way to mass update the content location at the site level. Right now, we can do the mass update at the folder level. We have about 80 folders or so. Is there a way we can mass update the starting url at the site level?
Environment: Oracle iLearning 5.2.1
Thanks
Sud

If you are mass updating the content location, you need to inspect the following three tables in the ILEARN schema.
Table Columns Description
content_server host, physical_directory Content Server Definition
rco starting_url Self Explanatory
host_adapter adapter_path CMI Adapter
You might not have to change all of them, if you are only changing the path and not the host.
Scott
http://www.seertechsolutions.com

Need to understand Site Assignment and Content Location Boundary Groups

Okay I am very confused about something that I am seeing that is throwing my understanding of how Boundary Groups work completely off.
Here is my dilemma:
I created two boundary groups, a site assignment and a content location boundary group. The site assignment boundary group contains all of my sites. The content location boundary group I have just has my datacenter systems where the DP installed on my site
server is being referenced in that boundary group.
Now, I had two pilot deployments. The very first pilot deployment I had I created a content location boundary group for that site and referenced the local DP and when I deployed software updates to the clients there, I kept getting timeout errors. The second
pilot deployment i had, I totally forgot to create a content location boundary group, but the software updates installed perfectly fine on those clients.
What the heck is going on here?
I thought if a content locatoin boundary group was NOT created for a remote site, then those clients would not be able to receive any content at all, period.
Can someone please, please explain to me what is going on here?
Thanks everyone

A couple of additional comments here that build on the previous by Peter and Nick.
Site assignment has nothing to do clients finding content so while it's good that you have a site assignment boundary group and even that you mentioned it, it has nothing to do with what's going on here. Also as a semantic side note, when referring
to remote locations, you shouldn't use the word "site" when discussing ConfigMgr because "site" means something very specific and could cause confusion. I typically try to use the word "location".
Clients that do not fall into a boundary within a content location boundary group automatically fall into a "default" boundary marked as slow in a default "boundary group". Neither of these is defined anywhere in the console or the product
so default isn't exactly the right word here, but it does convey the meaning. Thus, not being in a defined boundary does not mean that clients cannot get content, just that they will only get content allowed for slow boundaries or where fallback is enabled.
Jason | http://blog.configmgrftw.com | @jasonsandys

Changing VoteDisk Location in Same Disk Group

Hello All,
Greetings !
Oracle Grid Infrastructure 11.2.0.3
RHEL 6.4
I have installed the grid with single disk group having 3 disk DATA, ARCHIVE and OCR. the current location of votedisk is as:
/dev/oracleasm/disks/ARCHIVE [DATA]
it is possible to change the location to
/dev/oracleasm/disks/OCR [DATA]
Please guide.
Thnks & Bst Rgds,
Kapil Relan

Best practice is to make the OCR location normal redundancy with at least 3 members, that way you get 3 copies of the voting disk. There is a bug in the base release of 11.2.0.3 that can cause node to be ejected form the cluster if you only have one voting disk.
More generally you can control which disk group a file is created on but it will be striped across all the disks.
for example in out environment the CRS disk roup contains 3 disks of 2GB each with normal redundancy then two diskgroups with external redundancy DATA and FRA, genrally these will consist of multiple disks with the size being determined by the current requirements and the expected growth.

Changed content location on install

Similar Messages

Maybe you are looking for