Changement de version

Je dois modifier un programme initialement en version 3 ou 4 et le mettre a jour sur labview 7.
Quand j'ouvre le programme, j'ai une liste de "warnings". Dois je tout reprogrammer en version 7 ?
Quelles doivent etre les demarches ?
merci

Most of the warnings probably have to do with coersion, since LabVIEW made a major change on how it deals with conversions in later versions. Usually, this is not a problem, and the program will run fine. Because you are getting warnings and not errors, the program will run. I would open the program in LabVIEW 7, save it under a different filename and then run it. Watch it carefully to make sure you are getting the expected results. If there are any changes needed, they should be minor.
Dave.
==============================================
David Kaufman
LabVIEW Certified Developer
==============================================

Similar Messages

How do I change the Version Code in the Flash Android settings Android app market?

I recently tried to update my app in the Android app market and when I uploaded it I got the following message:
"The new apk's versionCode (1000000) already exists."
In the Flash Adnroid settings I changed the version label but that did not help.
So I have two questions:
How do I change the Version code in the Flash Android settings? I changed the version number and version label but that did not work.
What is the difference between the version number and version label?

I tried that but it did not work. Apparently there is a difference between the version code and version number (which is set in the Android settings). From my research the version label is optional, so there are no problems there.
This is the what the XML file says:
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<application xmlns="http://ns.adobe.com/air/application/2.6">
<id>com.company.nameofapp</id>
//Below is the correct version number, but has no relation to the version code.
<versionNumber>1.1.0</versionNumber>
<versionLabel>NewLayout</versionLabel>
<filename>Name of app</filename>
<description/>
I did find this piece of information for Androin version codes. (http://developer.android.com/guide/publishing/versioning.html) But I don't know how to place it into the xml file without conflicting with other code.
<?xml version="1.0" encoding="utf-8"?>
<manifest xmlns:android="http://schemas.android.com/apk/res/android"
      package="com.example.package.name"
      android:versionCode="2"
      android:versionName="1.1">
    <application android:icon="@drawable/icon" android:label="@string/app_name">
    </application>
</manifest>
Any other thoughts are much appreciated.

How do I change the Version Code in the Flash Android settings for the Android app Market?

I recently tried to update my app in the Android app market and when I uploaded it I got the following message:
"The new apk's versionCode (1000000) already exists."
In the Flash Adnroid settings I changed the version label but that did not help.
So I have two questions:
How do I change the Version code in the Flash Android settings? I changed the version number and version label but that did not work.
What is the difference between the version number and version label?

I tried that but it did not work. Apparently there is a difference between the version code and version number (which is set in the Android settings). From my research the version label is optional, so there are no problems there.
This is the what the XML file says:
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<application xmlns="http://ns.adobe.com/air/application/2.6">
<id>com.company.nameofapp</id>
//Below is the correct version number, but has no relation to the version code.
<versionNumber>1.1.0</versionNumber>
<versionLabel>NewLayout</versionLabel>
<filename>Name of app</filename>
<description/>
I did find this piece of information for Androin version codes. (http://developer.android.com/guide/publishing/versioning.html) But I don't know how to place it into the xml file without conflicting with other code.
<?xml version="1.0" encoding="utf-8"?>
<manifest xmlns:android="http://schemas.android.com/apk/res/android"
      package="com.example.package.name"
      android:versionCode="2"
      android:versionName="1.1">
    <application android:icon="@drawable/icon" android:label="@string/app_name">
    </application>
</manifest>
Any other thoughts are much appreciated.

Is it possible to change the version of Flash Player that Adobe Reader 9 uses?

I'm currently attempting to put some flash content within a pdf using the new Rich Media extensions. I have a working Flash .swf that uses some of the newer methods that only Flash Player 10 supports. The file can run on its own within Flash Player 10, but inside Adobe Reader 9 the flash player version is set to WIN 9,0,159,0 and the .swf file does not work. Is there any way to change the version of the Flash Player used in Adobe Reader 9?

Try code like this:
<pre><nowiki>#window-controls .toolbarbutton-icon {
width: 25px !important;
height: 25px !important;
</nowiki></pre>
The three buttons have these IDs:
<pre><nowiki>#minimize-button
#restore-button
#close-button</nowiki></pre>

The Appcache file is not updated even if I change the version. any changes concerning version 34.0

I have been working with the Appcache service in Firefox for the last 6 months and everything went fine. until the last update 34.0 . even if I change the version of the .Appcache file it seems that the browser doesn't take it into consideration.
the same code snippet work on IE and Chrome.
is there something I should be aware of since the last update.
thanks for your help :)

Chris, I'm embarrased I hadn't thought of trying your tip. It worked like a charm. Thanks.

[svn:osmf:] 18011: 1. Fix bug FM-1086, change OSMF version from 1.41 to 1.5

Revision: 18011
Revision: 18011
Author:   [email protected]
Date:     2010-10-04 16:45:07 -0700 (Mon, 04 Oct 2010)
Log Message:
1. Fix bug FM-1086, change OSMF version from 1.41 to 1.5
2. Misc code modifications
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-1086
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/elements/F4MLoader.as
    osmf/trunk/framework/OSMF/org/osmf/net/NetConnectionFactory.as
    osmf/trunk/framework/OSMF/org/osmf/utils/Version.as
    osmf/trunk/framework/OSMFTest/org/osmf/media/pluginClasses/TestPluginManager.as

I chroot into workdir. uncommented en_US.UTF-8 in /etc/locale.gen, run locale-gen and now get this inside the chroot.
[root@dArch2 releng]# chroot work/x86_64/root-image/
[root@dArch2 /]# locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
this looks alright to me. Any more suggestions?
It's the first time I use a custom-repo and I set it up only for this purpose. So yes, it's up to date and can be used outside the chroot. Also a different package I put from AUR into my custom-repo installs fine and doesn't give this error.
How else could I test the custom-repo?

How can I change the version of iTunes store back to UK, as I've just loaded new IOS version and the phone is loading the US iTunes store. Thanks.

How can I change the version of iTunes store back to UK, as I've just loaded new IOS version and the phone is loading the US iTunes store. Thanks.

http://support.apple.com/kb/ht1311

Mass Changing a Version Name

Is there a way to select a group of photos and mass change the Version Name? For instance, I have multiple pictures of Germany that currently have a version name of IMG_XXX.JPG - I'd like to change all these to just Germany.

This advise works if you didn't give the photos a version name during importing . I gave about 160 photos the wrong version name due to my failure to check. when i imported, it listed my previuos version name from other photos. now i try a batch change but it only adds the new version name to the one i don't want ,I've tried replace instead of append with no luck. any advise to delete existing version name and add a new version name. wayne

OWB Change Management/Version Control Best Practice

Hi
I am about to start developing a data warehouse using OWB 10g R2, and I've been doing quite a lot of research into the various deployment/change management/version control techniques that can be used, but am still unsure which is the best to use.
We will have 2-3 developers working on the project, and will be deploying from Development, to Test, to Production (each will have a separate repository). We want to be able to easily identify changes made between 1 release and the next to have a greater degree of control and awareness of what goes into each release. We also wish to use a source control system to track changes (we'll probably use SVN, but I don't think that the actual SCS tool makes a big difference to our decision at this point).
The options available (that I'm aware of), are:
1. Full MDL export/import.
2. Snapshot MDL export/import.
3. Manual coding of everything using OMB Plus.
I am loath to use the full MDL export/import functionality since it will be difficult, if not impossible, to identify easily the changes made between 1 release and the next.
The snapshot MDL export/import functionality is a little better at comparing releases, but it's still difficult to see exactly what has changed between 1 version and the next - particularly when a change to a transformation has been made. It also doesn't cope that well with tracking individually made changes to different components of the model.
The manual coding using OMB Plus seems like the best option at the moment, though I keep thinking "What's the point of using a GUI tool, if I'm just going to code everything in scripts anyway?".
I know that you can create OMB Plus code generation scripts to create your 'creation' scripts, but the code generation of the Alteration scripts seems that it would be more complicated than just writing the Alteration scripts manually.
Any thoughts anyone out there has would be much appreciated.
Thanks
Liffey

Well, you can also do per-object MDL exports and then manage those in your version control system. With a proper directory structure it would be fairly simple to code an OMB+ Script that scans a release directory tree and imports the objects one by one. I have done this before, although if you are using OWB as the primary metadata location for database objects then you have to come up with some way to manage object dependency order issues.
The nice thing about this sort of system is that a patch can be easily shipped with only those objects that need to be updated.
And if you force developers to put object-level MDL into your version control system then your system should also have pretty reporting on what objects were changed for a release and why.
At my current job we do full exports of the project MDL and have a deployment script that drops the pre-existing deployed version of the project before importing and deploying the new version, which also works quite well - although as you note the tracking of what has changed in a release then needs to be carefully managed elsewhere. But we don't deploy any of our physical database objects through OWB. Those are deployed from Designer, and our patch script applies all physical changes first before we replace the mappings from the OWB project. We don't even bother synching the project metadata for tables / views / etc. at deployment. If the OWB project's metadata for database objects is not in sync with Designer, then we wind up with deployment errors. But on the whole it works pretty well.

Change tracking version

I would like to get change tracking version for specific database(not the one stored procedure is running), something like:
SELECT someDB.dbo.CHANGE_TRACKING_CURRENT_VERSION();
Is that possible?
br, Simon

Have you enabled CDC in your database and for your table?
http://www.databasejournal.com/features/mssql/getting-starting-with-change-data-capture-cdc-in-sql-server-part-2.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

What is the user exit to change segment version at the run time of an IDOC

Dear Experts
Please can some one help on this ...
Which is the user exit to change segment version at the run time of an outbound IDOC.
For example
Suppose we have a IDOC segment with two version 620 and 46C.
By default the IDOC pick the 620. But Our requirement is to use 46C.
What user exit we can use for outbound IDOC to change the version used at run time for a segment.
Appreciate your response.
Thanks

Hi,
ALE00001 EXIT_SAPLBD11_001
User exit for the IDOC version changer
Regards,
Ravi

Hello, I have an ipod touch 2g and I can not download the application or change the version. made for me a solution please. and thank you

Hello, I have an ipod touch 2g and I can not download the application or change the version. made for me a solution please. and thank you

The hardware on the 2G does not support an iOS version higher than 4.2.1. If you want apps that require a higher version you will need to get a newer model iPod.
To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Vintapps 3.1.3 - paid app.
Apple Club - filter apps by iOS version.

Can I change the version of my imac, from 10.7 to 10.5?

Can I change the version of my imac, from 10.7 to 10.5?
Thanks!

No, 10.5.x is a PPC OS, 10.7.x is for intels only. In addition, you can't install an OS that is earlier than the one your machine came with.

Please help!! How can I change the version from Chinese to English?? Many thank!!!

Please help!!
I have download the photoshop, but its Chinese version, I need English one...
How can I change the version from Chinese to English??
Many thank!!!

Read http://forums.adobe.com/message/5713507#5713507 for instructions.

HT4623 changement de version sur iphone 3

Comment changer la version actuelle 4.2.1 a plus actuel?

Most of the warnings probably have to do with coersion, since LabVIEW made a major change on how it deals with conversions in later versions. Usually, this is not a problem, and the program will run fine. Because you are getting warnings and not errors, the program will run. I would open the program in LabVIEW 7, save it under a different filename and then run it. Watch it carefully to make sure you are getting the expected results. If there are any changes needed, they should be minor.
Dave.
==============================================
David Kaufman
LabVIEW Certified Developer
==============================================

Changing Plannning version/model thru CIF

While transferring master data from R/3 to APO thru CIF the planning version/model is set by default.I need to change the planning version value from its defualt value '000' to another custom value . Is there any user exit on R/3 or APO side which can do this.

Hi,
We implemented one User Exit in APO to change Planning version defaults. But i dont have APO system at present.
Search for APO user exits.
regards,
ram

Changement de version

Similar Messages

Maybe you are looking for