Changes in Table Maintanance

Hi All,
I have one requirement in table maintanance generator.I have 4 fields werks,matnr and to other fields for uper and lower limit.I want to display only those entry in the table maintanance for which user is authorized.
I want to check authorization on plant.I want to write some logic for this where I will check the user id for auth. in authorization object and based on the authorization plant I will select those entries and display.
If somebody know something then please suggest.
Regards,
Rajesh

hi rajesh,
se54 -> menue "environment" -> events.
i think you should try AA instead of the standard routine. i think the generated subroutine is named get_<viewname>.
either you can edit the where-statement or you can work with the result itab TOTAL which ahs the fields of your view and the fields of vimflagtab.
so i would recommend to define a itab
TYPES: BEGIN OF t_itab.
        INCLUDE STRUCTURE <your_view>t.
        INCLUDE STRUCTURE vimflagtab.
TYPES: END OF t_itab,
       ti_itab TYPE STANDARD TABLE OF t_itab.
and then move the TOTAL to your itab.
Hope this is getting you closer to the solution.
robert

Similar Messages

Regarding Changing data in Table Maintanance Generator

hi all,
I Created one Z Table for Five fields Sales District( BZIRK) , Sales District Description (BZTXT) , Vendor No , Vendor Name and Person Incharge. I Created Table Maintanance Generator for five fields.
In my ZTable after giving Vendor No when i enter Vendor Name is coming automatically and record is Created.For these i used Event No 5.
When i am going again and When I change Vendor No When I Press enter Vendor No is not coming automatically.
Which Event Should i use.
How can i achieve this . Plz send detailed process.
Please suggest.
Regards
Rami

Hi,
Please eloberate u r question. and give some code.
Regards,
Nandha

Table maintanance generator.........

Hi,
I heard that client will be able to access ztable through tablemaintanance generator(tmg).so What operations the client can be done in tmg for the ztable purpose.
Plz provide me any exact answers.
i ma posting this questn after completn of search from sdn fourm.
Regards
pavan

Hi,
He can enter the new values or he can change the Existing values.
For the details:
table maintanance Generator is used to manually
input values using transaction sm30
follow below steps
1) go to se11 check table maintanance check box under
attributes tab
2) utilities-table maintanance Generator->
create function group and assign it under
function group input box.
also assign authorization group default &NC& .
3)
select standard recording routine radio in table
table mainitainence generator to move table
contents to quality and production by assigning
it to request.
4) select maintaience type as single step.
5) maintainence screen as system generated numbers
this dialog box appears when you click on create
button
6) save and activate table
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm
/message/2831202#2831202 [original link is broken]
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
EVENTS:
http://help.sap.com/saphelp_nw70/helpdata/EN/91/ca9f0ea9d111d1a5690000e82deaaa/frameset.htm
Regards,
Shiva Kumar

Table Maintanance genarator

Hi Friends ,
I am working on CIN Programs (Standard programs )
I am creating 'Table Maintenance Generator ' for table J_1IEWTECESS .
Steps I followed
- Go to change mode for the table J_1IEWTECESS.
- Go to Utilities -> Table Maintenance Generator.
- Create the table maintenace using the "Create" button.
- Assign the function group J_1IEFILE for the package J1IN .
while try to save giving message that " You are changing a function group which does not belong to you" and cursor is placed on AUTHORIZATION GROUP.
Can U help me in this regard.
Thanks
Rohan .A

Hi
see this and do again correctly
table maintanance Generator is used to manually
input values using transaction sm30
follow below steps
1) go to se11 check table maintanance check box under
attributes tab
2) utilities-table maintanance Generator->
create function group and assign it under
function group input box.
also assign authorization group default &NC& .
3)
select standard recording routine radio in table
table mainitainence generator to move table
contents to quality and production by assigning
it to request.
4) select maintaience type as single step.
5) maintainence screen as system generated numbers
this dialog box appears when you click on create
button
6) save and activate table
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm
/message/2831202#2831202 [original link is broken]
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
Reward points if useful
Regards
Anji

How to maintain the entries using table maintanance??

Hi,
I have created a Ztable. and I have created table maintanance generator, then attached the table to a
Tcode. but I am unable to maintain the entries in table maintanance??
Can anyone help me out
Regards
Devi

Hi this will help u.
Hi,
Go to SE11 enter table name ->change
Utilities-> Table Maintenance Generator
delete the Table maintenance by pressing delete button on menu,
then start creating it again.
Enter Auth.Group as &NC&
Enter function group < some name>
Maintenance Type -> One step
Overview screen -> some Number (1 or 2)
Press create
enter dev class and save, activate.
Go to SM 30 and check again.
Reward if useful
Regards,
Hema Sundara.

Query in Table Maintanance Generator

Hi,
I have a query in table maintanance generator. In tables Extract and Total we have all the entries. Is it possible to get the entry which we made in the record. I mean i need the record in this i made the changes. I cant use above tqo tables because special characters are coming. Any body can suggest.
Regards,
Maheedhar

Maheedhar,
You will have to modify the program/code that was generated from the table maintenance generator to fit your requirements.
You can accomplish this by digging through the transport that you created, or by debugging through SM30 when you add a new entry or hit the save button. You should be able to find a place to add your custom logic.
Note: If you modify this code, anytime in the future if someone re-generates this table maintenance, your custom code will be over-written.
Thanks,
David

What is authorisation object in table maintanance generator

Hi,
what is authorisation object and authorisation group in table maintanance generator
can u pls let me know what are these?? and y do we need these?
Thanks in advance
Rama

hi,
Access to the transactions SM30 and SE16 is often regarded as a security risk on productive system. But with the right use of the authorization object S_TABU_DIS and the rarely used S_TABU_LIN, this isnt so.
With S_TABU_DIS you have the option to control access to groups of tables, and you have the option to distinguish between Update and Display access. If you dont want to give access to an entire table group, its quite easy in transaction SE54 to create a new authorization group and to reassign one or more tables/view to this group, thus achieving control of access to these specific tables.
If youre anxious about giving access to an entire table group, due to the fact that some tables have an open interface which allows table maintenance even in transaction SE16, the check this report developed and posted to the SAP Fans security forum by John A. Jarboe.
With the authorization object S_TABU_LIN you can even go a step further and control access to a table on record level, based on the key fields of the table. You can find an overall presentation of the object here.
The How-To guide below will demonstrate how to set up and use this authorization object.
The example is based on a small table ZMYTABLE. I have created a maintenance view and parameter transaction based on SM30 around this table.
Please notice that the parameter transaction is calling SM3o in update mode.
If the object is to be used with SE16 youll need to implement OSS note 763269.
S_TABU_LIN Customizing
We can find the customizing entries in the IMG under SAP NetWeaver à Application Server àSystem Administration àUsers and Administration à Line-oriented Authorizations.
First we need to define the organizational criterias.
In here create new criteria by pushing the New entries button.
In this example we will like to control access based on the key field Country, in order to do so create a criteria called Z_Country_Grp, with the name Country Grp. If we flag the table-ind flag the criteria will affect maintenance of all tables whose key fields are related to the domains specified in the attribute later.
In this example we only want to control the access to the specific table ZMYTABLE so we will leave it blank
Save the entry and assign it to a transport request.
Now mark the created line and switch to attributes
Create a new entry with the data shown below.
Save it and assign it to the transport request.
Notice that you can have up to 8 organizational criterion attributes.
Now we need to assign a table and a field to our attribute
In order to do so mark the attribute and switch to Table Fields
In here create a new entry and assign, in this example, the table ZMYTABLE, and the field name country to the attribute.
Please notice that only Key fields can be used !
Save and assign to transport request
Now we are ready for activating our organizational criteria this is the second bullet in the IMG
Just check the active flag and the check is activated.
Incorporate the authorization object in a role
We have now implemented the authorization check; next step is to implement it in the required roles.
In this example I have created a parameter transaction ZMYTRANSACTION - using SM30 around the table ZMYTABLE. I have create a small test role ICC_TEST, including only the transaction ZMYTRANSACTION, and a few support transactions.
In the authorization part I have inserted the object S_TABU_LIN manually (best practice is of course to assign it in SU24), but a manual insert will also do the trick J
Now when we change one the authorization fields by pushing the pencil the profile generator will ask us for the criteria.
Here we chose the Z_COUNTRY_GRP criteria that we have created.
Well now get the following popup, in this case we will grant change access, so we choose 02 Change for activity
In the list below well see the Organizational Attributes that we have created we have the option to use up to 8 attributes in the example we had only defined one attribute Country Grp - we assign the value DK thus only granting access to records with DK in the key field country.
To transfer the selection back to the profile generator press th transfer button or press F5.
Now we just need to generate the profile and assign it to a test user.
Now when this test user signs on to and executes the transaction only entries for Cty DK is displayed.
If the transaction is executed by a user with SAP_ALL all records are displayed,
Important Links For u:[http://www.sapsecurity.co.uk/sap-authorisation-objects.html]
Thanks And if helpful please reward points

Restricting the table maintanance

hi experts,
i have created a table and generated a table maintenance using "table maintanance generator" in utilities menu. in the authorization group i have put "w/o auth grp" and authorization object system has proposed S_TABU_DISP. i want to limit the access to this maintenance table only to certain users. i mean even the user has the SM30 access, certain people only should be able to enter or change the entries in the table. how do i achieve this
thanks

hi abaper,
thanks for the reply. i have gone through the link. so basically i have understood the funda of assigning authorisation group in the table maintenance generator screen and assigning to auth object. but i could not understand the second option , which is about tcode. lets say i have created a tcode for maintenance table , now how do i restrict that only certail users have access to that tcode. can u give me the detail steps required.
also what do u think is the best and safe option.
thanks

Need suggestion to get data from change log table of ODS.

Hello,
There is a case where i am loading opportunity header data from header ODS and opportunity item data from item ODS in the opportunity cube.
Status (1= OPEN, 2= WON ETC) of the opportunity are available only in header ODS and not in item ODS.
While loading data from header ODS to cube, I am loading it directly but while loading data from item ODS to cube i am using active data table of header ODS as a lookup in the update rule from item ODS to cube. I am selecting status from the active data table of header ODS while loading data from item ODS to cube.
Since active data table will have only after image records, there is some data mismatch in the report as i am selecting data from active data table of header ODS while loading data from item ODS to cube.
I need to select data from Change log in order to get before image also instead of active data table in order to overcome this issue. Is there any way by which i can do selection from Change log instead of active data table as change logs are generated at run time.
Please let me know if you have any suggestions.
Regards,
Sanjay Chaurasia.

Hi,
You can use the changelog table of the DSO.
Right click manage the Header DSO, go to the contents tab and click Change Log table. There you can see the technical name of the Change Log table.
In the update rule Routine, give the tech name of Change log table instead of Active table name.
Hope it helps.
Krishna

How to change the table's for an existing report

Hello,
How can I change the table names for reports created with a different table name? for e.g If I created a report which included a table called "2009_10_example", How can I change that table to a different table "2010_10_example1".
I am using Crystal reports 2008, and the reports were created using Report Creating Wizard.
Thanks,
Abhishek

In the Database Menu, there is an option Set Datasource Location. This allows you to pick a table from the current tables used, and select a table to replace it with. Press the Update button, and Crystal will swap one for the other. If the field names and data types are all the same, it will automatically change all references throughout the report to the new table's fields.
May I suggest that your tables are set up improperly if you have to change report code to run it for different months? The data should all be in one table with dates, and parameters to select the date range to report on. (That was said in the spirit of helping...)
HTH,
Carl

How to find out the top ten Change log tables in BW

I want to know the top ten change log tables in terms of size. Do we have a SAP standard table where we have the following fields : "changlog table name", "number of records" field or "data in size" field.
Regards,
Prashant M J

Hi,
Click on change log table in the ODS/DSO at the top you see the name as /bic* which is the name of the database table which could also be seen at SE11.
If you wana see the requests in this change log use rstsodsrequest
and if you wana see the size in terms of kb, mb DB02 or st04
use the table name /bic* and click on tables and indexes option in history tab
DB02 tells you the sizes of the tables present on database. Incase you are not able to your basis team would help you in that
Thanks and regards
Kiran

How to transfer data in change log table of dso to z-table using abap code

Hi can you please explain me how to transfer data in change log table of dso to z-table using abap code ,with out using Function module concept

PROGRAM NAME:   ZBW_DELTA_TO_GSTAR                                 **
report ZBW_DELTA_TO_GSTAR no standard page heading
                                 line-size 120
                                 line-count 75
                                 message-id ZBW_MSG_CLS.
tables:   ZGIV_DLTA_EBV_BB,
          ZGIV_DLTA_EM2_BL,
          ZGIV_DLTA_EM2_BK.
Selection Screen Definitions
SELECTION-SCREEN: BEGIN OF BLOCK INNER WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN: SKIP 1.
PARAMETERS:       EBVBB RADIOBUTTON GROUP ROLL,
                  EM2BL RADIOBUTTON GROUP ROLL,
                  EM2BK RADIOBUTTON GROUP ROLL.
SELECTION-SCREEN: END OF BLOCK INNER.
Data: WS_UPDATE_FLAG Type C,
       UCounter(9)      Type N,
       ICounter(9)      Type N.
DATA: T_ZGIV_DLTA_EBV_BB Type Standard Table of ZGIV_DLTA_EBV_BB,
       s_ZGIV_DLTA_EBV_BB LIKE line of T_ZGIV_DLTA_EBV_BB.
DATA: T_ZGIV_DLTA_EM2_BK Type Standard Table of ZGIV_DLTA_EM2_BK,
       s_ZGIV_DLTA_EM2_BK LIKE line of T_ZGIV_DLTA_EM2_BK.
DATA: T_ZGIV_DLTA_EM2_BL Type Standard Table of ZGIV_DLTA_EM2_BL,
       s_ZGIV_DLTA_EM2_BL LIKE line of T_ZGIV_DLTA_EM2_BL.
Standard Internal Tables - Describe usage.
data: begin of i_AEPSD_O0140 occurs 0.
        include structure /BIC/AEPSD_O0140.
data: end of i_AEPSD_O0140.
data: begin of i_AEPSD_O0240 occurs 0.
        include structure /BIC/AEPSD_O0240.
data: end of i_AEPSD_O0240.
data: begin of i_AEPSD_O0340 occurs 0.
        include structure /BIC/AEPSD_O0340.
data: end of i_AEPSD_O0340.
data: begin of i_GIV_DLTA_EBV_BB occurs 0.
        include structure ZGIV_DLTA_EBV_BB.
data: end of i_GIV_DLTA_EBV_BB.
data: begin of i_GIV_DLTA_EM2_BK occurs 0.
        include structure ZGIV_DLTA_EM2_BK.
data: end of i_GIV_DLTA_EM2_BK.
data: begin of i_GIV_DLTA_EM2_BL occurs 0.
        include structure ZGIV_DLTA_EM2_BL.
data: end of i_GIV_DLTA_EM2_BL.
Miscellaneous Program Variables and Constants.
TOP-OF-PAGE
top-of-page.
START-OF-SELECTION
start-of-selection.
Clear: i_GIV_DLTA_EBV_BB,
         i_GIV_DLTA_EM2_BK,
         i_GIV_DLTA_EM2_BL,
         UCounter, ICounter.
IF EBVBB = 'X'.
    PERFORM 100_EXTRACT_EBV_BB_DELTA_RECS.
ELSEIF EM2BK = 'X'.
    PERFORM 100_EXTRACT_EM2_BK_DELTA_RECS.
ELSE.
    PERFORM 100_EXTRACT_EM2_BL_DELTA_RECS.
ENDIF.
FORM 100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EBV_BB_DELTA_RECS.
Refresh:   i_AEPSD_O0140,
             i_GIV_DLTA_EBV_BB.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EBV_BB .
Select * From /BIC/AEPSD_O0140
    Into TABLE i_AEPSD_O0140.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0140.
      MOVE-CORRESPONDING i_AEPSD_O0140 TO s_ZGIV_DLTA_EBV_BB.
      MOVE SY-DATUM to s_ZGIV_DLTA_EBV_BB-create_dt.
      INSERT ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS.
Refresh:   i_AEPSD_O0240,
           i_GIV_DLTA_EM2_BK.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BK .
Select * From /BIC/AEPSD_O0240
    Into TABLE i_AEPSD_O0240.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0240.
      MOVE-CORRESPONDING i_AEPSD_O0240 TO s_ZGIV_DLTA_EM2_BK.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BK-create_dt.
        INSERT ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS.
Refresh:   i_AEPSD_O0340,
           i_GIV_DLTA_EM2_BL.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BL .
Select * From /BIC/AEPSD_O0340
    Into TABLE i_AEPSD_O0340.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0340.
      MOVE-CORRESPONDING i_AEPSD_O0340 TO s_ZGIV_DLTA_EM2_BL.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BL-create_dt.
        INSERT ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BL_DELTA_RECS
END-OF-SELECTION
end-of-selection.
perform D1000_REPORT_DATA.
D1000_REPORT_DATA
form D1000_REPORT_DATA.
*Display the title of the program
write: /25 SY-TITLE.
skip.
Diaplay the details of the user and time
write: /1 'Executed by', 15 SY-UNAME, 30 'Date',
38 SY-DATUM, 53 'Time', 60 SY-UZEIT.
skip 2.
write: / 'Delta Records have been extracted ',
         /   'Updates : ', UCounter,
         /   'Inserts : ', ICounter.
skip.
skip 3.
write: /20 'End of the report'.
endform.                                           "D1000_REPORT_DATA
chgeck it out this also may hep you

Dynamically changing internal table in 'gui_download'

Hi Experts,
                 i have to download 4 internal tables, each with different structures, to the presentation server using 'gui_download', based on which radio-button is selected in the selection screen. I am hoping to use a single 'form' and 4 'perform' calls. how can I dynamically change the tables in the 'gui_download' function modules.
plz help.....................

Hi ,
Build the field catalog dynamically based on the internal table structure based on the radio button selected.Use the dynamic internal table generated from the filedcatalog and use in GUI_DOWNLOAD.
See the below code:
*& Report ZRAJESH02
REPORT zrajesh02.
Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
              <dyn_wa>.
DATA: alv_fldcat TYPE slis_t_fieldcat_alv,
      it_fldcat TYPE lvc_t_fcat.
DATA: lv_monate TYPE f,
      lv_months TYPE i,
      lv_date TYPE sy-datum,
      p_check1 type n value '1'.
lv_date = sy-datum + 360.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_check TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
CALL FUNCTION 'MONTHS_BETWEEN_TWO_DATES'
    EXPORTING
      i_datum_bis   = lv_date
      i_datum_von   = sy-datum
      i_kz_incl_bis = ' '
    IMPORTING
      e_monate      = lv_monate.
lv_months = lv_monate.
PERFORM f_fcat USING 'AUFNR' 'CHAR' '12'.
PERFORM f_fcat USING 'POSNR' 'CHAR' '06'.
while p_check1 LE p_check.
PERFORM f_fcat USING p_check1 'CHAR' '1'.
p_check1 = p_check1 + 1.
endwhile.
PERFORM build_dyn_itab.
LOOP AT <dyn_table> INTO <dyn_wa>.
    WRITE:/ <dyn_wa>.
ENDLOOP.
FORM f_fcat USING fieldname dattyp length.
DATA:wa_it_fldcat TYPE lvc_s_fcat.
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = fieldname.
wa_it_fldcat-datatype = dattyp.
wa_it_fldcat-intlen = length.
APPEND wa_it_fldcat TO it_fldcat .
ENDFORM.                    "f_fcat
*&      Form build_dyn_itab
      text
FORM build_dyn_itab.
DATA: new_table TYPE REF TO data,
new_line TYPE REF TO data.
wa_it_fldcat TYPE lvc_s_fcat.
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = 'AUFNR'.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 12.
APPEND wa_it_fldcat TO it_fldcat .
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = 'POSNR'.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 6.
APPEND wa_it_fldcat TO it_fldcat .
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = it_fldcat
    IMPORTING
      ep_table        = new_table.
ASSIGN new_table->* TO <dyn_table>.
Create dynamic work area and assign to FS
CREATE DATA new_line LIKE LINE OF <dyn_table>.
ASSIGN new_line->* TO <dyn_wa>.
ENDFORM.                    "build_dyn_itab
Thanks,
Rajesh.

How to make use of Table Maintanance Generator?

PLs sany one can explain me how to maek use of Table maintanance Generator?
Regards and cheers,
Giri

Hi,
    table maintainence Generator is used to manually
    input values using transaction sm30
    follow below steps
   1) go to se11 check table maintanance check box under
      attributes tab
   2) utilities-table maintanance Generator->
      create function group and assign it under
      function group input box.
      also assign authorization group default &NC& .
   3)
    select standard recording routine radio in table
    table mainitainence generator to move table
    contents to quality and production by assigning
    it to request.
   4) select maintaience type as single step.
   5) maintainence screen as system generated numbers
      this dialog box appears when you click on create
     button
    6) save and activate table
   using sm30 you can create entries manually.
also check below thread to assign transaction code to
table generator
/message/240993#240993 [original link is broken]
0#2409930
Regards
amole

How to get the Reports of Change Tracking Table in MDM?

Hi!
Please tell me how to get the reports of Change Tracking Table in MDM which is a System table, directly from MDM without using any interface.
Thanks in advance for the reply.
With Best Regards
Devendra Pandey

Hi Devendra,
MDM can track changes on tables and fields. <u>The level of change tracking, and which tables/fields to track, are configurable in the MDM Console</u>. MDM opens a new database on the same database engine as the MDM repository and writes all change records to this database.
For information of various steps you can visit
<a href="http://help.sap.com/saphelp_mdm550/helpdata/en/45/c7b20339ee570ae10000000a114a6b/content.htm">this URL</a>
Regards,
Krutarth

Changes in Table Maintanance

Similar Messages

Maybe you are looking for