How to maintain the entries using table maintanance??

Hi,
I have created a Ztable. and I have created table maintanance generator, then attached the table to a
Tcode. but I am unable to maintain the entries in table maintanance??
Can anyone help me out
Regards
Devi

Hi this will help u.
Hi,
Go to SE11 enter table name ->change
Utilities-> Table Maintenance Generator
delete the Table maintenance by pressing delete button on menu,
then start creating it again.
Enter Auth.Group as &NC&
Enter function group < some name>
Maintenance Type -> One step
Overview screen -> some Number (1 or 2)
Press create
enter dev class and save, activate.
Go to SM 30 and check again.
Reward if useful
Regards,
Hema Sundara.

Similar Messages

Validation: How to maintain the entry in GB02C

HI FI GURUS n EXPERTS,
My requirement is that - We want to restrict Negative posting for some GL i.e. For some GL balance should not be Zero.
When I have made the search on SDN, I found it can be done with the help of Validation: OB28 & GGB0.
Currently we are not using any validation. When we use T-Code GGB0 --> Financial Accounting --> Line Item --> New Validation
System shows a pop-up window to select Boolean Class & Message ID.
I also found that this information is maintained in Table GB02C.
When I use Se16 to see the detail of the table GB02C, I found there is only one entry Bool. Class: FP1 & Message ID 7F.
But I don't know How to maintain the entry in table GB02C & What is the T-Code for it. which message ID I have to create.
Please help.
DSC

Dear Alex,
When I use: GGB0 --> Financial Accounting --> Line Item --> New Validation
System shows a pop-up window to select Boolean Class & Message Class, I select the Message Class 9 and for Message Class Press F4 and select any message class. System gives an error message: Message ID must start with 'Z' Message no. GB116.
Basically, My question is that: Which T-Code we have to use to maintain Boolean Class & Message Class.
With thanks,
DSC

How to move the entries of table BNKAIN between systems

Hi,
Is there any way to export the entries of table BNKAIN from one SAP system (development) to another manually? This is the table which is not transported via a transport...even in development system the "transport entries" option is not active. IN SM30 the maintenance view is not created.
Can you advice how to move the entries somehow manually?
Thanks for any assistance!
br,Slawek

Hi, thanks for reply.
In fact I checked the table BNKA and the entries there are not helpful for me in the target system.
We are using there some user exit which is using the table BNKAIN and the following entries are there:
Client Bank Country Bank Key        Internal bank
790            CA           IHC6            1
790            DE           IHC1            1
790             FI             IHC             1
790            FR           IHC3            1
790            GB           IHC4            1
790            US           IHC5            1
I checked the properties of that table in SE11 and it is maintainable only with restrictions..thus I need to ask some other basis expert which will help me to inlcude those entries into a transport.
Anyway thansk for your hints!
Bye

ASE 15.7 how to find data entry using table page nr

Hi,
I am looking for a dbcc () to get data when I know page number from a table
Thank you

Hi Isabella,
What your asking is not supported by SAP .. although you can achieve the result by using dbcc page:
http://wiki.scn.sap.com/wiki/display/SYBASE/DBCC+page
The only problem is that the data is in binary format so you have to format it by yourself to a readable format.
Regards,
Adam

How to maintain the Alert History by using OWN Tables

Hi,
In BAM defalut alert "History" table having limited number of columns.
But i want to maintain more informations about alerts so is there any other way to maintain the by using OWN alert history Table.
Thanks and Regards,
kash

No you cannot maintain your own history tble.
The only columns available are the ones displayed in the alert history data object.
Apart from this no other information will be available.
Alternatively you can create another Data object and create a look up field pointing towards the alert history label based on a particular key.
If the key matches then the data from the alert history DO will be pulled into this DO.
To this DO you can add your own columns and populate them with your own data.

How to restrict the entries of a database table based on the user name

Hi All,
I have created a Database Table. Table maintenance generator is generated for the table.
UNAME(user name) is one of the fields in the table. whenever the user creates a new entry, the field UNAME will be populated automatically with SY-UNAME value. I have used Table event '05' to do this.
My requirement is...
When a user tries to maintain the entries of the table using SM30, when 'DISPLAY' is chosen, all the records of the table should be displayed.
When 'MAINTAIN' is chosen, only those records which have UNAME = SY-UNAME(User Logged in) should be in EDIT mode. and rest all the records should be in DISPLAY mode(greyed out). It should allow to edit only those records which are created by the user logged in.
Could you please tell me how to do this..? Thanks in advance.
Thanks & Regards,
Paddu.

HI,
In table main. gen there are number of events , try to select one event like 05 for the Sy-uname.
For the requirement:
In that event write the code like
this is basic idea not the code:
Case ' Sy-ucomm'.
when 'display'. " button
Nomally for the display button it will show all the records, but we need to write a code like this.
select all records frm the table.
( Need to write the code in case if the user first maintained the data then again press the display , list has to be refreshed.)
when ' Maintain'. " button.
Fetch the records that are with SY-UNAME and find out the edit function and implement it on each and every record.
endcase.
Thanks and Regards,
Bharani.

How do we update the entry in Table HRESSAPPROVER Table?

Hello friends,
I need to understand how the table HRESSAPPROVER Table entries are modified? Do we need to follow a Tcode like PA40 to initiate an Action or do we need to update any infotype, or should we directly edit the entries in table using some Tcode?
Thanks
Avik

Hi,
check this thread
How to maintain HRESSAPPROVER table
Regards,
Manoj.

How to maintain the data into database table

Hi,
experts,
how to maintain the data into database table

There are several ways to maintain data in the database
1. Use table maintanance generator . You can create this using SE11 and data can be edited through SM30.
2. Loginto SE11 with the specified table and check the ATTRIBUTES tab. There you can set some parameters for maintaining the database. When you set Maintain database, you edit the data thorugh SE11 it self
3. Through Se16 as well.
4. A small abap program can do the above task as well.
Thanks,
Raj
Edited by: Rajanya Kolavennu on Feb 5, 2008 8:33 PM

How to add the entries and how to delete the entries from custom Z-table?

Hi Experts,
My requirement is I need to add the entries from program to three custom z-tables . Assume as zabc1,zabc2,zabc3.
Here how to add the entries from program to Z-table.???
And one more requirement is I want to provide a deletion checkbox in selection screen . Initial it was unchecked. If I am giving tick mark then the entries should be deleted from above custom Z-tables. this all will done in backgroung job?
Could you please guide me the logic how to crack this???
Let me know if you need more Info
Thanks
Sanju

Hi Sanjana,
What you can do is to use the ABAP keyword INSERT or MODIFY to add or modify records to a given database table. Here are the syntax taken from SAP documentation:
*Insert Statement
INSERT dbtab
Syntax
INSERT { {INTO target VALUES source }
| { target FROM source } }.
Effect
The INSERT statement inserts one or more rows specified in source in the database table specified in target. The two variants with INTO and VALUES or without INTO with FROM behave identically, with the exception that you cannot specify any internal tables in source after VALUES.
System Fields
The INSERT statement sets the values of the system fields sy-subrc and sy-dbcnt.
sy-subrc Meaning
0 At least one row was inserted.
4 At least one row could not be inserted, because the database table already contains a row with the same primary key or a unique secondary index.
The INSERT statement sets sy-dbcnt to the number of rows inserted.
Note
The inserted rows are finally included in the table in the next database commit. Up until this point, they can still be removed by a database rollback.
*Modify Statement
MODIFY dbtab
Syntax
MODIFY target FROM source.
Effect
The MODIFY statement inserts one or several lines specified in source in the database table specified in target, or overwrites existing lines.
System fields
The MODIFY statement sets the values of the sy-subrc and sy-dbcnt system fields.
sy-subrc Meaning
0 At least one line is inserted or changed.
4 At least one line could not be processed since there is already a line with the same unique name secondary index in the database table.
The MODIFY statement sets sy-dbcnt to the number of processed lines.
Note
The changes are transferred finally to the database table with the next database commit. Up to that point, they can be reversed using a database rollback.
Hope it helps...
P.S. Please award points if it helps...

How to delete the entries from NAST table

Hi,
Please help me out by providing any function module that delete's the entries from hte NAST table.
Regards,
Kiran.L

REPORT ZSCD_TEST13.
delete from nast where VSTAT = '1'.
=====
If you see the FM : NAST_DELETE_OBJECT, its only useful when NACHA = 7 (i.e. message transmission medium = Simple Mail)
For others its not useful.
We had similar issue few days back and after long RnD, we straightaway deleted the entries using the Zprogram.
regards,
Edited by: Pranu Pranu on Aug 19, 2008 1:42 PM

How to find the columns and tables used in a stored procedure?

Hi,
Can someone suggest how to find the columns and tables used within a stored procedure?
Thanks
VBK

For example:
SQL> create or replace
2    procedure p1
3      is
4          cnt number;
5      begin
6          select count(*) into cnt from emp;
7 end;
8 /
Procedure created.
SQL> select referenced_owner,
2          referenced_name
3    from dba_dependencies
4    where owner = 'SCOTT'
5      and name = 'P1'
6      and referenced_type = 'TABLE'
7 /
REFERENCED_OWNER               REFERENCED_NAME
SCOTT                          EMP
SQL> SY.

How to maintain the data in the view cluster

we are doing upgrade, we have one view cluster app_log in this object scwb
and subobjects is swtlo1,02,03 like i have some subobjects in 4.6c we transported the view cluster to ecc6.0 in ecc 6.0 i have object scwb but subobjects doesn't exist how to maintain the subobjects in view cluster.

Definition
A view cluster is a group of maintenance dialogs which are collected in one maintenance unit for business or technical reasons. They allow related data in more than one table/view to be maintained consistently.
Use
Whereas only 1:1 relationships can be processed in maintenance views (except for language-dependent texts), key extensions and relationships of cardinality N:M can also be handled in view clusters. Maintenance dialogs with no key, or partial key-dependence, can also be combined into view clusters.
Grouping dialogs into one maintenance unit has the following advantages for data maintenance:
Navigation: A view cluster contains convenient standard navigation between the individual maintenance dialogs. This simplifies the maintenance of the data in a view cluster.
Consistency: The view cluster ensures data consistency when deleting, copying, saving, retrieving and manually transporting data. For example when an entry in a higher-level view is deleted, , it automatically ensures that all dependent entries in lower-level views are also deleted.
You can first split tables with a lot of fields into various views and then collect them into a view cluster.
Use tabs to format very wide tables with a lot of fields.
Structure
Navigation in a view cluster is usually based on the hierarchy of the tables/views on which the dialogs are based. A view cluster usually consists of one or more root dialogs and the at most 14 maintenance dialogs which depend on them. A view at a lower level has one or more additional fields in its key compared its higher-level view. Each data record at the higher level has several dependent data records below it.
Each maintenance dialog is an independent unit consisting of an overview screen or an overview and a detail screen, depending on the dialog type. As well as the data to be maintained, the overview screen contains a navigation area, in which you can go to higher or lower level maintenance dialogs.
One-level maintenance dialogs only contain one screen, the list screen, in which all existing data records are displayed in a table. In a two-level maintenance dialog, double-clicking on a data record in the list screen takes you to the detail screen, which displays all the fields in the selected data record.
Generate a maintenance dialog for each view before you call the cluster maintenance (SM34). When you generate the maintenance dialog, flag the key fields which are identical in the view and its higher-level in the cluster, with the maintenance attribute S. The system fills the key fields when you go from the upper to the lower level, with the values of the data record selected in the upper level. Go to the transaction SE54 to define a view cluster.
<b>Rewards point if useful.......</b>
regards....
Abhaysingh.

How to maintained the Text language for CKF keyfigure

Dear All,
Please let me know how to maintained the text language for CKF I am using only keyfigures in CKF.
Issue is text is not showing in Spain language when user exeuted the report (longin Spain) for CKF keyfigures .
As per report design there are formuals and direct keyfigures and CKF has defined and we keep it under in Row struture in the report.
After exeuted the report (Login Spain)Text has converted in all languages along with spain except for CKF keyfigures.
Issue in text CKF's:
There is a main CKF (Cost) under this again we defined two sub CKF's those are total cost and average cost. We able to see the text in Spain language for Main CKF(cost) and also cheked in RSZELTTXT(Texts of reporting component elements) for the same.
We can able to see the text in all languages for main CKF(cost) and enteries are there in RSZELTTXT table.
We can see only the text in english for total cost and average cost and also enteris are there only in EN in RSZELTTXT table.
It would help to me if any one can answer my question.
Thanks in advance .
Regards,
MQ

U can fetch the texts for the items using
Read_text.
Example:
    g_f_tdname = xvttp-vbeln.
    g_f_obj = p_obj.
    g_f_langu = 'DE'.
    REFRESH g_t_lines.
    CLEAR g_t_lines.
    CALL FUNCTION 'READ_TEXT'
         EXPORTING
              id                      = p_var
              language                = g_f_langu
              name                    = g_f_tdname
              object                  = g_f_obj
         TABLES
              lines                   = g_t_lines
         EXCEPTIONS
              id                      = 1
              language                = 2
              name                    = 3
              not_found               = 4
              object                  = 5
              reference_check         = 6
              wrong_access_to_archive = 7
              OTHERS                  = 8.
    IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
The Required fields are,
Text-id ,language,name,object.
Let me know if you further require help.
Regards

How to Maintain the Pricing Condition Records in CRM

Hi
I am new to the CRM
How to maintain the pricing condition records in crm for the particular condition type?
as we do in SD(VK11)
Thanks

Hi Binu,
First of all, you could maintain pricing conditions in the following places:
1. In General Condition Maintenance (GCM)
2. At the product maintenance level
3. At the 'Price agreement' tab of Contracts
4. As manual conditions during order processing at item level
Now, if you want to maintain conditions using GCM, you first have to maintain a condition maintenance group in the customizing where in you can assign condition table and condition type for different counter values. I am assuming that you have done this activity successfully.
When you run the transaction '/SAPCND/GCM', for application 'CRM', your condition maintenance group name and context 'GCM', you will be initially taken to a screen where in you'll have an item area which would be blank and then condition fields would be displayed in a tree on the left.
Here, select the field 'Condition type' and click on icon 'Select records'. You would get a dialog prompting you to enter condition type. Here you can specifiy the condition type for which you want to maintain/view condition records.
If no condition records are available, item area would be left blank. Here, you can choose a condition type using the standard F4 help. Depending on condition types that are assigned to condition maintenance group, different condition types would be displayed in the F4-help using which you can maintain condition records.
Hope this helps.
Regards,
Pavithra
**PS: Please reward points if this helps.

How to create Infotype entry in table T777D

Hi All,
We have undergone Upgrade from 4.6C to ECC 6.0.
Now we get an error while maintaining certain data infotype 0122 does not exists.
I looked at the entries in table T777D in both the system. In older system the entry is there but not in the new system.
When i tried creating the entry in this table the error comes 'Module pool program MP012200 is not present'. This program was there in 4.6C but is not there in ECC 6.0.
How do we genrate this program or how do we create the entry for this infotype to correct the error.
Is there any customizing settings that is required?
Please advice.
Regards,
Vidya.

Look at OSS [Note 546167 - Termination in PA10: Infotype 0122 does not exist|https://service.sap.com/sap/support/notes/546167]
>Symptom
>
>When you edit the master data (transaction PA10) after you upgrade Release 4.6C to Release 4.70 or higher, a termination occurs and an error message is issued informing you that infotype 0122 does not exist.
>
>Other terms
>
>No entry in table T777D
>
>Solution
>
>In the 'Infotype attributes (Customizing)' view (extended table maintenance for view V_T582A), delete the entry for infotype 0122.
>In the 'Infotypes - country-specific settings' view (extended table maintenance for view V_T582L), delete the entry for infotype 0122.
Regards

How to maintain the entries using table maintanance??

Similar Messages

Maybe you are looking for