Changes in WBS ELEMENT while extracting

Hi All,
I am extracting data from PRTE table .I had created generic data source based on this table but I am facing some problem.
Lets say the data in PRTE table is
wbs element
current proj
start date
end date
00000061
00000002
10.09.2007
31.05.2008
00000066
00000002
10.09.2007
31.05.2008
00000067
00000002
10.09.2007
31.05.2008
while extracting data is coming like below in RSA3
wbs element
current proj
start date
end date
RR/0702
RR/0702
10.09.2007
31.05.2008
RR/0702-SUP
RR/0702
10.09.2007
31.05.2008
RR/0702-SUP-FRW
RR/0702
10.09.2007
31.05.2008
In PSA TABLE the data is coming.

hi,
i think you may need to use coversion routine function modules.
CONVERSION_EXIT_ABPSN_OUTPUT
CONVERSION_EXIT_ABPSN_ INPUT .
CONVERSION_EXIT_ABPSP_OUTPUT
CONVERSION_EXIT_ABPSN_INPUT .
please take abap pepert and implement small loogic.
Need to choose the right FM based on your be wbs element feild.
Thanks

Similar Messages

  • Update termination error "Enter WBS element" while confirming Tranfer Order

    Hi Gurus,
    I am getting an update termination "Enter WBS element" while confirming Transfer Order. One thing that i noticed is that this issue is occuring with line items that are having special stock indicator "K".
    Please let me know as to what could be root cause and how could this be avoided.
    Do let me know for any clarification.
    Regards,
    Trishul

    Any suggestions?
    Regards,
    Tanuj Parikh

  • Mass change in WBS element

    Hi friends,
    I want to use Mass change in WBS element for the Partner field in the Partner tab page. But when I am into the mass change screen, there is no option for this Partner field. What can be done for this? Please suggest.
    regards
    Pratap

    Hi,
    The Partner tab in project is visible only after assigning the Partner Schemas to the project profile in PartnDet.Proc field.
    I think Mass change can be done only to the fields that are already maintained by default.
    Thanks,
    Muzamil

  • Change of WBS Element

    Hi,
    i am checking the all tabs of  WBS Element in CJ20N, while checking unfortunately one character of WBS Element was missed & saved accordingly.
    Old :   09/ITS/CN/IT/T09
    New:    9/ITS/CN/IT/T09
    Now user is trying to settle 09/ITS/CN/IT/T09 in CJ88, it showing the error as WBS does not exist.
    again i tried to change as  09/ITS/CN/IT/T09 in CJ20N. but it is showing the error as below.
    WBS element 09/ITS/CN/IT/T09 version RELEASED already exists
    Message no. CJ026
    Diagnosis
    A WBS element with the name 09/ITS/CN/IT/T09 already exists in version RELEASED.
    System Response
    Processing stopped.
    Procedure
    Enter another name for the WBS element.
    now how can i replace the correct WBS Element, Please suggest me any solution is possible.
    Regards,
    Shekar

    Hi Shekar,
    There are other options available to you, to resolve this issue.
    Firstly, you can manually delete the WBS Element from the table
    VSPRPS_CN. There is no report to remove individual records from this
    table.
    Alternatively, please review note 616732.
    This report renames the WBS Element within the table VSPRPS_CN. You
    could rename this WBS Element in VSPRPS_CN allowing you to recreate the
    operative WBS Element.
    Again customers are advised to contact regional support when running the
    report ZVERSION_UPDATE to be informed of the following.
    Thanks a lot and kind regards,
    Enrique Sosa

  • Error in WBS element while doing the purchase requisition

    Dear All,
    While doing the purchase requisition in ps
    the error is : Item 010 WBS element IN05-PR09-16 . 04 budget exceeded.
    Kindly parovide any solution.
    Best Regards,
    Venkat.

    Hi Venkar,
    Check the available budget against WBSE - IN05-PR09-16 . 04 (S_ALR_87013558 - Budget/Actual/Commitment/Rem Plan/Assigned ), and the PR amount. Available Budget should be more than PR amount. Based on the tolerance limits set for the  budget profile, maintain the Current Budget with budget updates and try to create a PR accordingly.
    Hope this solves your problem !!
    Br
    Hari.
    Edited by: Hari Krishna Kudaravalli on Aug 20, 2009 3:25 PM

  • System status change of WBS element

    Hi everyone,
    We need to change system status of WBS element programmatically.
    So can anybody suggest me which function module can I use?
    Thanks & Regards,
    Anirban

    system stauts is set when some function is executed e.g.
    REL is set when WBS is set to REL - CJ20N edit->status-> release
    SETC ise set when settlement rule on WBS is creaed
    BUDG is set when you carry out budgeting via txn CJ30
    so it depends on what system status you want set, then execute the following business transaction manually or via program/ development.
    However for setting REL or TECO you might be able to use some function modules
    For WBS elements I would check out the following
    CNIF_STATUS_2054               Set/Read Status for BUS2054                                     
    BAPI_BUS2054_GET_STATUS        Read Status for BUS2054 (Work Breakdown Structure)              
    BAPI_BUS2054_SET_STATUS        Set/Reset Status for BUS2054 (Work Breakdown Structure)         
    CNIF_STATUS_2054_CANC_AALK                                                                     
    CNIF_STATUS_2054_CANC_CLSD                                                                     
    CNIF_STATUS_2054_CANC_DLFL                                                                     
    CNIF_STATUS_2054_CANC_LKD                                                                      
    CNIF_STATUS_2054_CANC_MDLK                                                                     
    CNIF_STATUS_2054_CANC_TECO                                                                     
    CNIF_STATUS_2054_CANC_USER                                                                     
    CNIF_STATUS_2054_SET_AALK                                                                      
    CNIF_STATUS_2054_SET_CLSD                                                                      
    CNIF_STATUS_2054_SET_DLFL                                                                      
    CNIF_STATUS_2054_SET_LKD                                                                       
    CNIF_STATUS_2054_SET_MDLK                                                                      
    CNIF_STATUS_2054_SET_REL                                                                       
    CNIF_STATUS_2054_SET_TECO                                                                      
    CNIF_STATUS_2054_SET_USER

  • Change in WBS element in a PO

    Hi
    In my Purchase Order, earlier it was account assigned to a WBS element A. When we ran CJI3, it showed the same. But now the account assignment of WBS element was changed to B. I have no idea how this got changed. I only can check from the Purchase Order history and founf that "Profit center has been changed for the item".
    How this could have happened? Any info reg this will be helpful. Thanks.

    do you hav any substitution rules in PO
    where did you change the profit centre
    in std sap this should not be an issue

  • User Exit / BADI to change Project WBS Element/Task data

    Hi,
    We are using BAPI BAPI_PROJECT_MAINTAIN to create Project in R/3. We are passing Company Code to Project Definition Structure ( BAPI_PROJECT_DEFINITION ). BAPI updates Header company code at line item ( WBS element / Task ) level also. We do not want company code at line item level.
    Is any User Exit or BADI available in the above BAPI to change WBS/Task data. Also I would like to know whether we can control data flow ( from header to Line item ) through customisation.
    Thanks in advance.
    Naren

    Hi,
    Thanks. BADI WORKBREAKDOWN_UPDATE has import parameters. It does not have export parameters. I can not change import parameter data.
    I am looking for user exit or BADI to change WBS/Task data.
    Regards,
    Narendra

  • Selecting wrong WBS element while preparing the Purchase Order

    Hi Gurus
    We want to check the data while end user input it in the system.
    While preparing the the PO in the sysetm we input the plant id,storage location and WBS element.
    End user may select wrong WBS element of project under with plant. I want to prevent it.
    How can I prevent end user for selecting wrong WBS element under plant and storage location.
    Atul Kulkarni

    HI,
    You need to some developement...create Z table and maintain  the entries with the cobinations in what way you want to restrict and call the same in the PO.
    Hope it will works.
    Kuber

  • How to display WBS element while parking FI document from an excel??

    I'm using BAPI_ACC_DOCUMENT_POST to park/post FI document from an excel file. Accounting Document Numbers are generated that triggered the posting. When i'm viewing the generated document in transaction FBV0/FB03 it's found that the WBS element is appearing blank when the document is parked. But it's appearing fine when the document is posted. I'm unable to find the difference.

    Can you let us know how were you able to PARK documents using BAPI_ACC_DOCUMENT_POST?  Is there an exit provision in this BAPI?  Thanks in advance.

  • Where can I see change documents for all changes to WBS elements

    I have set up config via OPSA for both Basic Data and Status Management change documents to be allowed for nominated project profiles.  I have then created a new project with the required project profile and whilst I can see the history for status  management / user status.  I am unable to see changes for other field information.
    Is there a way to be able to see who changes the data like (wbs description, person responsible /applicant, profit centres etc)?
    I have checked table JCDS and that only appears to give me status management.
    Thanks
    Trish

    Try transaction CJCD or CN60
    Abraham

  • Brightness change in other elements while using Scroll Effects on another

    I am using Scroll Effects on a short piece (two words) of text.  The scroll effect takes place on the LEFT hand side of my page.  When rendered to a browser, on the opposite side of the page, two text blocks out of five, which are situated vertically down the RIGHT side of the page start out dimmed at approx. 50% of their natural brightness.  As you scroll down the page, activating the scroll effect on the LEFT side, these two text blocks brighten back up to normal at exactly the point where the "scroll effect text" lands in it's final position.  In other words, it's as if you dimmed the "lights" on some of the text on the opposite side of scroll effect, until you scroll down.  Then it's "lights on!"  It's a cool effect if I could figure out what is doing it, but as it is, it's screwing up the look of my page when it opens.
    All I can come up with is 'Website-Poltergeist'.  Any help or suggestions would be fabulous, PLUS, if this could be controlled, it would be an interesting feature on a page where some element that you want to Pop out as someone scrolled could be accomplished with this 50% brightness.  If I can solve this, I'll post the how and why as a "hidden effect" in Muse.
    Thanks!

    Make sure "Opacity" is not marked in the "Scroll Effects" panel.

  • Problem while creating WBS elements using LSMW

    Hello experts,
    I am able to create Project Definitions using LSMW. (using recording)
    But there is a problem while creating WBS elements.
    Tcode CJ20 has table control and that will become problem for multiple rows (levels).
    Can anyone suggest a solution to mass upload WBS elements?
    Thanks for your valuable advice.

    Hi,
    Instead of using "BAPI_PROJECT_MAINTAIN", use following solution. We are using this solution and it is working pretty good.
    If the WBS element is already created and you want to create one more with same data, first get the WBS related information using BAPI_PROJECT_GETINFO as you are doing currently.
    I am using different sets of BAPIs to create project, create / change WBS element.
    I use function module from Function group CJ2001 ( Project related BAPIs ), CJ2054 ( WBS related BAPIs ) and PS_BAPI ( pre/post processing BAPIs ). There are specific order in which you need to execute these BAPIs.
    For example if you want to create / change the WBS element, the BAPIs sequence is:
    <b>1. BAPI_PS_INITIALIZATION
    2. BAPI_BUS2054_CREATE_MULTI ( to create  WBS )
             or
    2. BAPI_BUS2054_CHANGE_MULTI ( to change WBS )
    3. BAPI_PS_PRECOMMIT
    4. BAPI_TRANSACTION_COMMIT</b>
    Check the documentation of BAPI "BAPI_BUS2054_CREATE_MULTI " to see how these function modules work.
    Let me know if you need further information.
    Regards,
    RS

  • How to change WBS Element in FI Entry for Asset

    Hi all,
    I have a scenario where an asset has been capitalized with  WBS element 1. After several months we realized that it has to go to WBS element 2.
    We update the Asset Master Data with a new WBS Element 2.
    Depreciation from this date onwards is posted to WBS Element 2 (this is expected), but in FI the asset acquisition cost is still in WBS element 1.
    Does anyone know how to rectify the FI document with correct WBS element i.e  WBS Element 2
    Any advice would be greatly appreciated
    Regards
    Pramod Saraswat

    Hi Pramod,
    In posted document you cant change the WBS element.
    In order to post on WBS 2 , you have to reverse the acquisation entry posted on WBS1. Then update correct one in  asset master then post acquisation.
    Ravi

  • Changing WBS element in PO

    Hi
    In my Purchase Order, earlier it was account assigned to a WBS element A. When we ran CJI3, it showed the same. But now the account assignment of WBS element was changed to B. I have no idea how this got changed. I only can check from the Purchase Order history and found that "Profit center has been changed for the item".
    How this could have happened? Any info reg this will be helpful. Thanks.
    Reagrds
    Ram

    Hi,
    You can check the same in item >envoirnment-> changes.
    Also if your PO is made wrt PR & some one has changed the wbs in PO only then it will not show correct commitment values in PS reports.
    If you want your data to be correct then you give authroization only to your Planning team to change the WBS element. You can ask your consultant to make these fields as grey when PR is converted to PO.
    regards,
    Vinay

Maybe you are looking for

  • Restoring multiple iPhones, updates prompt with wrong credentials?

    Good morning all, At my job I am responsible for deploying new iPhones to our users. We recently upgraded all iPhone 4 devices and are giving users iPhone 5c. I connect their old devices to my computer to back them up as a new device, and when I conn

  • How to reduce different versions of SQL with bind variables

    There is an application, developed on Java. Application executes SQL following types: select * from t where id in (:1) select * from t where id in (:1, :2) select * from t where id in (:1, :2, :3) select * from t where id in (:1, :2, :3, :4) ...And a

  • Error when calling getLocalSocketAddress() on for a newly created socket

    Hello, I have an issue when using JVM 1.5.0.12 on HP-UX (IA64N): java.lang.Error: java.net.SocketException: Bad file number (errno:9)      at sun.nio.ch.Net.localAddress(Net.java:123)      at sun.nio.ch.SocketChannelImpl.localAddress(SocketChannelImp

  • SpeedGrade CC14  will not open - Mac 10.9.5

    SpeedGrade refuses to luanch on my Mac. Mac Pro, GTX 680, latest Cuda drivers. Tried uninstalling and reinstalling, using the CC cleaner tool to wipe it out before re-install and same result. The splash screen never even comes up. A small dot appears

  • Is there a 'play all' function?

    i have four episodes on idvd, they all play fine, after each episode it then returns to the menu i then have to play the next episode manually, is there a way so that i could add a 'play all episodes' function so that they automatically play back to