Brightness change in other elements while using Scroll Effects on another

I am using Scroll Effects on a short piece (two words) of text. The scroll effect takes place on the LEFT hand side of my page. When rendered to a browser, on the opposite side of the page, two text blocks out of five, which are situated vertically down the RIGHT side of the page start out dimmed at approx. 50% of their natural brightness. As you scroll down the page, activating the scroll effect on the LEFT side, these two text blocks brighten back up to normal at exactly the point where the "scroll effect text" lands in it's final position. In other words, it's as if you dimmed the "lights" on some of the text on the opposite side of scroll effect, until you scroll down. Then it's "lights on!" It's a cool effect if I could figure out what is doing it, but as it is, it's screwing up the look of my page when it opens.
All I can come up with is 'Website-Poltergeist'. Any help or suggestions would be fabulous, PLUS, if this could be controlled, it would be an interesting feature on a page where some element that you want to Pop out as someone scrolled could be accomplished with this 50% brightness. If I can solve this, I'll post the how and why as a "hidden effect" in Muse.
Thanks!

Make sure "Opacity" is not marked in the "Scroll Effects" panel.

Similar Messages

Unable to change reference point location while using the Transform Functions in Photoshop Elements 6.0.

Unable to change reference point location while using the Transform Functions in Photoshop Elements 6.0.

Which operating system are you using?
In photoshop elements 6, as far as i know, you can only change the Reference Point Location for transforms using the small grid in the left hand corner of the tool options bar with Transform enabled.

Any change between 2003 & 2008 while using User Placeholder (%username%)

Hi Experts,
I just want to know if there is any change while using place holder (%username%) between 2003 & 2008R2.
Vipin Tyagi

I agree, and I still use it.
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

DISQUS BUG COMES WHEN USING SCROLL EFFECTS ON PHONE LAYOUT

There are two bugs i have discovered when applying the disqus html code on a phone layout
1. if you have FIXED an item say above where you place the html code snippet from disqus - the widget loads ok BUT when you try to enter it the scroll goes crazy and it doesn't work - to the best of my knowledge changing LAYERS and putting the DISQUS code on one layer alone doesn't solve anything
2. Adobe muse somehow picks p the DESKTOP version of DISQUS instead of the MOBILE LAYOUT version as you see on most websites - this is really annoying even putting the code from disqus to enable mobile in the header does nothing for me
<b:widget id='HTML1' locked='false' mobile='yes' title='Disqus' type='HTML'>
I would be most thankful is someone can show me a solution or even at this stage another comments site that can play nice with adobe muse - i am totally at a loss
i need the phone layout to work as it is primarily a web app I'm making -
yes disqus loads ok on the desktop layout the scroll effects doesn't bother it - it is just on a phone layout things get crazy - if someone has managed to do a mobile website with a fixed scroll effects item above a disqus widget i would be so interested to look at it.
Cheers

The fix for the bug 4690946(http://developer.java.sun.com/developer/bugParade/bugs/4690946.html) was integrated only in jdk 1.5

Changes in WBS ELEMENT while extracting

Hi All,
I am extracting data from PRTE table .I had created generic data source based on this table but I am facing some problem.
Lets say the data in PRTE table is
wbs element
current proj
start date
end date
00000061
00000002
10.09.2007
31.05.2008
00000066
00000002
10.09.2007
31.05.2008
00000067
00000002
10.09.2007
31.05.2008
while extracting data is coming like below in RSA3
wbs element
current proj
start date
end date
RR/0702
RR/0702
10.09.2007
31.05.2008
RR/0702-SUP
RR/0702
10.09.2007
31.05.2008
RR/0702-SUP-FRW
RR/0702
10.09.2007
31.05.2008
In PSA TABLE the data is coming.

hi,
i think you may need to use coversion routine function modules.
CONVERSION_EXIT_ABPSN_OUTPUT
CONVERSION_EXIT_ABPSN_ INPUT .
CONVERSION_EXIT_ABPSP_OUTPUT
CONVERSION_EXIT_ABPSN_INPUT .
please take abap pepert and implement small loogic.
Need to choose the right FM based on your be wbs element feild.
Thanks

How to change the default element tag using dbms_xmlgen

here is my code that generate output for purchase order data. I followed the syntax shown in xml db developer guide.
I am getting the results but element tags are CAPS letters( As the coloumn names in the type defenitions are stored in CAPS in Oracle). but I need to show in small letters as per my requirement.
can anyone help me how to change the default tag names for elements.
==================================HERE IS THE CODE==================
DECLARE
qryCtx DBMS_XMLGEN.ctxHandle;
result CLOB;
BEGIN
qryCtx := DBMS_XMLGEN.newContext
('SELECT PODL_H_T
( CLOSEDDATETIME ,
COMPANY ,
CAST(MULTISET
(SELECT LINENUMBER ,
COMPANY ,
PURCHASEORDERID ,
ITEM ,
QUANTITYUM ,
TOTALQUANTITY
FROM cpo_wms_podl_LINES
WHERE PURCHASEORDERID = PH.PURCHASEORDERID) as PurchaseOrderDetailList
FROM cpo_wms_podl_HEADERS PH ');
-- now get the result
DBMS_XMLGEN.setRowSetTag(qryCtx, 'Receipts' );
DBMS_XMLGEN.setRowTag(qryCtx, 'PurchaseOrder' );
result := DBMS_XMLGEN.getXML(qryCtx);
INSERT INTO temp_clob_tab VALUES (result);
DBMS_XMLGEN.closeContext(qryCtx);
END;
-- select * from temp_clob_tab
===========create type script=====================
cpo_wms_podl_HEADERS
CREATE or replace TYPE PurchaseOrderDetail AS OBJECT(
LINENUMBER VARCHAR2(400 BYTE),
COMPANY VARCHAR2(400 BYTE),
PURCHASEORDERID VARCHAR2(400 BYTE),
ITEM VARCHAR2(400 BYTE),
QUANTITYUM VARCHAR2(400 BYTE),
TOTALQUANTITY NUMBER
create type PurchaseOrderDetailList as table of PurchaseOrderDetail
create table temp_clob_tab(result CLOB)
create type podl_HEADERS_list_t as table of podl_HEADERS_t
CREATE or replace TYPE PODL_H_T AS OBJECT
CLOSEDDATETIME DATE,
COMPANY VARCHAR2(400 BYTE),
CREATEDDATETIME DATE,
PURCHASEORDERID VARCHAR2(400 BYTE),
SHIP_TO VARCHAR2(400 BYTE),
linelist PurchaseOrderDetailList
)

but I need to show in small letters as per my requirement.add alias column names in double quotes as in
SQL> select dbms_xmlgen.getxmltype('select dname "DeptName", loc "Location" from dept') dept_xml from dual
DEPT_XML
<ROWSET>
<ROW>
    <DeptName>ACCOUNTING</DeptName>
    <Location>NEW YORK</Location>
</ROW>
<ROW>
    <DeptName>RESEARCH</DeptName>
    <Location>DALLAS</Location>
</ROW>
<ROW>
    <DeptName>SALES</DeptName>
    <Location>CHICAGO</Location>
</ROW>
<ROW>
    <DeptName>OPERATIONS</DeptName>
    <Location>BOSTON</Location>
</ROW>
<ROW>
    <DeptName>SALES</DeptName>
    <Location>MUNICH</Location>
</ROW>
</ROWSET>
1 row selected.

How to ignore empty text element while using DOM to parse xml??

hi everyone,
i am using DOM to parse an xml file. But i dont know how to cinfig the DocumentBuilderFactory to ignore empty text elements.
For example, i have an xml file like this:
<?xml version="1.0" encoding="UTF-8" ?>
<root>
    <child>Tom</child>
    <child>Jerry</child>
</root>I used the following codes to parse:
String fname = "Tom-and-Jerry.xml";
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
factory.setIgnoringElementContentWhitespace(true);
factory.setIgnoringComments(true);
DocumentBuilder builder = domFactory.newDocumentBuilder();
// Generate a DOM tree from the DOM builder.
org.w3c.dom.Document dom = builder.parse(new File(fname));
org.w3c.dom.NodeList list = dom.getChildNodes();
for (int i=0; i<list.getLength(); i++) {
    System.out.println("Child No."+i);
    System.out.println("NodeName="+list.item(i).getNodeName());
    System.out.println("NodeType="+getType(list.item(i).getNodeType()));
    System.out.println("NodeValue="+list.item(i).getNodeValue());
    System.out.println();
}The result is not exactly what i want ---- there are 5 children in list!! The 1st, 3rd and 5th are #text and their values are all empty. Only the 2nd and the 4th are the child that i expect.
It is really troublesome to get all these silly empty texts as sub elements. I tried to get rid of them, but i failed. I just dont understand why factory.setIgnoringElementContentWhitespace(true) did not work.
Anyone can help me? thanks.
Heavy ZHENG

I just dont understand why factory.setIgnoringElementContentWhitespace(true) did not work.That only does something if the XML has a DTD that enables it to know what whitespace can be ignored and what is significant. The API documentation for the method refers you to this document:
http://www.w3.org/TR/REC-xml#sec-white-space

My voice is not transmitting to the other person while using speaker mode during a call in iphone 6 plus

I bought iPhone 6 plus last week, which came with ios 8.1 pre-installed, now when I call, my voice is not reaching/transmitting to other person on the call while talking on speaker mode but as soon as I turn off speaker mode my voice reaches to that person.
Another problem i

Hi kshitij 2589,
Thanks for visiting Apple Support Communities.
It sounds like you can't be heard on calls when using speakerphone. I know it can be frustrating to encounter unexpected issues with a new device.
I'd recommend going through these tips first, to see if they have an impact on the behavior you're seeing:
Test the microphone
To find out if there is an issue with the microphone itself—and not the app you're using or your cellular connection—test the microphone with the built-in Voice Memos app. Speak into the microphone and then play back the recording. You should be able to hear your voice clearly.
Follow these steps, testing after each with Voice Memos.
Unplug anything plugged into the headset jack.
If you're on a call and holding your phone next to your ear, speak into the microphone and make sure you don't block it with your fingers or shoulder.
If you're using a screen protector or case that covers the microphone, remove it. Clear any debris from the microphones.
Restart your device.
Update to the latest version of iOS.
If you've tried these steps and people still can't hear you well on calls, contact Apple Support.
You can find the steps above in this Apple Support article:
If your voice is too faint or sounds unclear using iPhone, or iPod touch - Apple Support
All the best,
Jeremy

What to do incase of new change in Org Structure while using indirect assig

Hi all,
This is my first post in this forum and I hope I will get the right answer.
We have implemented the indirect role assignement and now we are in the process to set the process incase of any change in the Org Structure.
Option 1)
Me as a security engineer I have decied to have the following process:
HR has moved an employee from position to position > HR will inform the SAP Security Engineer about the new change > SAP Security Engineer lock the user and send the new list of roles for the employee to the mananger and process team lead for approval > mananger and process team lead can either approve the request or suggest new changes > then the SAP Security Engineer will do the changes i(if any) and then unlock the user.
Option 2)
One of the Process Team Leads is suggesting that we assign the roles to the positions once, get it approved and then whatever happen we don't care.
Please let me know what is the best way, and I am sure the first option is the best but a lot of manual work.
I hope to get good response on this and I hope if there is supported document from SAP.

>
Julius Bussche wrote:
> Option 1 sounds labour intensive. Option 2 requires better planning and testing.
>
> If your roles are built with the org structure in mind and the user's authority for anything other than basic common functions is from those position based roles, then you can assign the roles to the positions and let HR move the user's around as their jobs change in the org structure.
>
> What you should however be involved in is any changes to the org structure itself and the roles assigned to the positions and the roles themselves anyway.
>
> As you would be letting the system do a large part of the boring work for you, you should also monitor the usage of it from time to time.
>
> If you have a very large number of users and your org structure is stable and well defined (i.e. not a chaotic project structure...) then go for option 2 because it is more scalable.
>
> Cheers,
> Julius
In addition to Julius comments, I like to add the following base on our current security design.
We have something similar to option #2 in place. We have HR base security by positions. We made sure the business owners of the security roles are aware of the security role to position mappings. We have a matrix of security to position mappings that has been approved by the business owners. Exceptions are address in the form of a Help Desk ticket.
In this example all managers will get a set of roles. The clerks will also get a set of roles. Again these will be pre-approve role to position assignments.
Position: Manager
Assign Role: Z-GL-MANAGER & Z-AP-MANAGER
Position: Clerk
Assign Role: Z-GL-CLERK & Z-AP-DISPLAY
Option #1 - It's too much work and you are assuming that all the players involve on the business process will follow through, from notification of move, to approval, and more notification, etc.
As long as the business owners are aware and understand how position base security works option #2 is the way to go. Of course we have other procedure in place before handing out security credentials, from submitting an SAP access form to mandatory training, etc. We currently do not have the man power to have option #1 in place.
Good Luck!

Component assigned one opr changed to other opr while creatingProd.Ord inVC

Hi,
We are having problem in variant configuration material.We have assigned one component to operation 10 in super BOM.But when we create Production for Variant confiurable material component is assigned to other operation.
Thanks
Tej

Hi
In VC the component selection is based on the selection condition u assign to the items in Super BOM. Based on the char value selection during config one particular components will get picked up from super BOM and operations from super routing.The combination of Component and operation likely to vary in VC scenario and can not be fixed like normal cases.
Regards
Brahmaji

Apply Scroll Effect Opacity To An Audio File

I'm building a fairly simple one page scrolling site but I want a different audio file to fade up when user scrolls down to each new page, with the old audio file fading out creating a sort of cross-fade between the pages audio content. Is there a way to achieve this using Scroll effects opacity? I've got a simple audio embed html tag for the mp3's but perhaps there is a better way to do this that would allow for an easy application of the scroll effects opacity effect. Would love to figure out a way to do this without any coding. Happy to purchase a widget if anyone knows of any for a similar effect. Thanks for any help!
Sean

You need to break up your presentation into one presentation per nominee with a hyperlink to the next presentation set on the last slide. This will allow you to insert the audio voice over into the presentation to play across the multiple slides for the nominee. Place the audio using the Keynote Inspector > Presentation > Audio and drag the voice over file into the soundtrack well.
To set the hyperlink, you need to place an object on the last slide of each nominee set that when clicked will hyperlink to the next Keynote file. With the object selected use the Keynote Inspector > Hyperlink > Enable As A Hyperlink (ON) > Link To: Keynote Slideshow (in pull down menu) > navigate to the next file and select it.
Note: All Keynote presentation files should be opened prior to starting the overall presentation so that they start when the link is clicked, otherwise you will see an attempt to open a file, but the show will stall.
The object can be "invisible" with no fill and no stroke, but it can be a hard target to find on the fly. I would suggest placing it over a logo or other repeating graphic element.

Scroll effect is not working with button

step 01: Make 3 pages (e.g. Home, About and Contact)
step 02: use state 3 individual buttons from widget and link them with pages (home, about and contact pages)
step 03: Try to use scroll effect with individual buttons.
it will not work...
if you first use scroll effect and then link the buttons with pages then the button will not get display on browser.

What scroll effect are you using on the buttons?

Scroll Effect issue

Hello.
scenario
I am setting up an object that when you click it you are returned to the top of the page.
I chose to use Scroll Effects for this.
Issue
I am using an 1920x1080 monitor and so the scroll effect is set to that standard.
When i test the site on an smaller monitor the object is out of place or even out of screen.
Is there a way to make the object static or lock it to a point on the screen so it still follows when scrolling on any size monitor?
have
Thank you!

You could pin the object in place, so when you scroll down the page it stays in the same position (instead of Scroll effects)
Having the object set to the left side of your screen should guarantee it being visible on any size monitor.

Error while using '*'in the NTE (EDI 850) Segment where '*' is also used as Data Element

Hi All,
I am facing below mentioned error while using '*'in the NTE (EDI 850) Segment where '*' is also used as Data Element
Error: 1 (Field level error)
SegmentID: NTE
Position in TS: 70
Data Element ID: NTE02
Position in Segment: 2
Data Value:
3: Too many data elements
For Eg: NTE*GEN*My Text *goes here
Here, NTE02 should be My Text *goes here. So, how can I use "*" here without changing anything in the EDI message?
Can it be done?
Thanks.

Sorry, no.
X12 does not support an escape character so whatever is used for delimiters become reserved characters.
If you want to allow '*' in the data, you will have to chooser a different Element delimiter. The receiver should read the from this from the ISA Segment so it's supposed to be dynamic but that's not always the case in practice.

My screen reduces brightness while using apple tv, any suggestions?

My screen reduces brightness while using my apple tv - any suggestions?

Does it just look darker all the time or does the brightness change over time?
If it just looks darker, check Settings>Video and if set to RGB Low try RGB High or YCrCb.
I was watching a digital copy of final Harry Potter last night that came bundled with the Blu Ray - could not believe how dark the film was - I used to routinely use RGB Low on AppleTV1, and such settings options have only just appeared on AppleTV2. I could see hardly any shadow detail on RGB Low, much improved on RGB High.
AC

Brightness change in other elements while using Scroll Effects on another

Similar Messages

Maybe you are looking for