Changing a card's source document
Is it possible through the PRC to change the document that an existing card points to. For example, card 115 opens up doc1.txt. But now the document is updated and renamed to doc2.txt. We could create a new card and delete the old one, but we want the same metdata as we had for the old card. So is there a way to do this without creating a new card, copying the metadata, and deleting the old card? Thanks for the responses ahead of time.
I don't think you can change the "incoming" last name that you see when you receive an email from the person because the email originates from the sender who sets his/her name to be displayed as such, say John Doe, instead of what you want it to be as John Dee.
By changing the last name that is in Address Book, that only changes the displayed last name of the person whom you are sending out the email to.
Similar Messages
-
Create fillable form with changing source document
I want to create a fillable, saveable form in which the source document changes. Hope I am using the correct verbiage. Source document meaning the Word document that I convert to a .pdf, which I then use to create the fillable form. This source document has client/description information that consistently changes. Is there any way to easily create the fillable form, without having to insert/size/change the text boxes each time (iow, create a whole new form each time)? I am using Acrobat X.
Thanks,
JulieIf you can have a copy of the original form, create a PDF of the changed form and create a new PDF with a name different that the original form. This will be content layer of the document and not have the form field layer or form fields. You can then open the original PDF form and use the "Document => Replace pages..." to replace the underlying content of the original form while retaining the form field layer. You can now save the revised form. You may need to relocate form form fields due to changes in the form.
-
Why doesn't mail merge in Pages reflect changes made to the numbers source document?
When using mail merge in a Pages envelope document, changes made to its Numbers address source document are not reflected. I have to create a whole new Pages envelope document and choose the Numbers address source document merge fields all over again.
I never had any trouble doing this with Word and Exell!
What am I doing wrong?Denney,
Mail Merge from Numbers works just as you are trying to use it.
You create a Numbers document with the proper layout for merging.
Enter the data in teh numbers document and Save it.
You create a Pages Document to merge into and create the links to the Numbers document.
You Edit > Mail Merge in Pages.
To merge again from the Numbers document, make the necessary edits, Save the Numbers document and do the mail merge again in the Pages document that you created for that purpose. The only problem that normally arises is that we forget to Save the Numbers document after editing.
Jerry -
Can't Change Credit Card Number, told to reregister but can't find reregister button
Hello,
Sorry to be a trouble, But I can't change my credit card # (because BBapps will not allow me to log on to control panel to do so. Made the mistake as a 1st timer to assume would ask for credit card number after I purchased Documents to Go.
Did not ask, but charged the purchase to the CDMA number from former owner of my BBS2. I then erased the downloaded Docuiments to Go as I was not intending to charge some one else's card. Need to change credit card number to square this away. This is my first BB machine and I find that I don't know all the needed things.
Can someone point out how to reregister so I can add my credit card #
OR
Can someone point out how to change the current assigned Number/credit card charge in control panel.(does not allow me in with my password that works for downloading free apps)
Can still dow free programs, but cannot buy upgrades. Frustrating, THanks, Ty Parr, Ph,D,Hello,
I am more than willing to pay for the Documents to Go app on my own credit card, the problem is getting to it. I don't intend to have Blackberry service, but surely this does not prevent paying for and down loading programs for my device, If I will wipe the device without a new CDMA number I suspect that will not allow me to to offer a credit card number and get the Documents to Go program as well as others. Why is it impossivle to buy programs for a blackberry without a blackberry service contract for a CDMA number? This really seems very rigid since the BBS2 is so long out of date. There must be plenty of individuals that are doing this who had the wisdom to give a credit card number when they registered - I did not realize this was required as I routinely buy things on the net AND THEN give CREDIT CARD # to compelete the purchase. Is this some sort of Catch 22 situation ?
I like this phone and don't want to give it up. If necessary, I will buy a second BBS2 and try to register that WITH A CREDIT CARD number so that I Can use this machine. This an endless Catch 22? I don't want a CDMA service that is very hard to get outside the USA.
Can I register my BBS2 if I have a T-Mobile plan for the CDMA number (which I will never use and for which I will pay for programs with a separate credit card number ?). ? Otherwise I have a wonderful piece of junk because of arbitraty and rigid rules that are also preventing Blackberry profits as well as App producer profits . If I can't solve this, I will have to re-examine whether I want this machine that I still really like.
Again thanks, If you can help me navigate this seeming endless Catch 22 ! -
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
For the last 5 years (and in IPCC3.x/4.x,UCCX/5.x/7.x) I've used the same basic subflow to read a XML document that contains holiday dates where the queue should be closed. I've re-used this script on 20+ client installs and it's always worked. The structure of the script allows you to pass the path and filename of the XML document as parameters to the subflow. (The document is in the repository)
I loaded this script in UCCX 8.0.2 recently and it crashed with a Java.IO error. It looked like it was trying to read the file system directly and not the repository. (In the Linux appliance model this kind of makes sense but why is the step trying to read the file system directly?)
So I open a TAC case (SR# 615243125) and TAC tells me that the method of using the Create File Document step is not supported anymore and that I should specify the filename directly in the Create XML Document step
The problem that I see (aside from having to edit all my scripts that use XML files) is that the Create XML Document step is looking for the input to be a type DOCUMENT and not a type STRING. This seems to imply that I have to hardcode the document in each script that I deploy for a customer. When it was a string it was easy to construct the full file path from parameters and pass to the subflow.
Questions to the group
#1 Am I missing something here?
#2 Do you assume that you'll be able to load a script that worked fine in UCCX 7 into UCCX 8 and that it should completely function when you're doing everything according to the step reference documentation.
#3 Cisco didn’t document this in any way that I can find.
#4 How can you use the Create XML Document step in a fashion that would let you construct the path of the file and the filename previously in the script so you could pass it to a subflow ? It would seem this functionality has been killed in UCCX 8
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
(Background)
Create File Document Step
The input filename is a STRING, could be an explicit path and filename in the repository or a variable that represents that path and string
The output of this step is a DOCUMENT to be used in the Create XML Document step
The string FILE_FullPathHolidayFiles references en_us\folderName\documentName.xml
The document was properly uploaded into the repository only, NOT trying to directly read c:\foo\blah…
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
The create XML document input can only be a type DOCUMENT#1 Am I missing something here?
You are mixing two different issues together here.
The Create File Document step is indeed not needed or supported for creating an XML document. That is why there is a unique step; to trigger XML parsing within the MIVR subsystem.
Accessing the file system is restricted to a single folder within the VOS model (i.e. 8.0+). This folder is not backed up, replicated, or cleaned up automatically. It was intended to give developers some FS access as a temporary swap location only.
#2 Do you assume that you'll be able to load a script that
worked fine in UCCX 7 into UCCX 8 and that it should completely
function when you're doing everything according to the step reference
documentation.
Assume nothing; read the documentation and attend one of the dozens of partner training sessions that CCBU put on advising of the upcoming changes.
#3 Cisco didn’t document this in any way that I can find.
You're right, I guess, on the Create File vs. XML Document step. AFAIK Cisco never wrote a notice into the Step Reference Guide explicitly stating that you cannot use the Create File Document although the documentation seemed pretty clear to me without it. File system restrictions are documented in the 8.0 release notes.
Scripting and Development Series: Volume 2, Editor Step ReferenceUse the Create XML Document step to create a logical document that maps a document to another document variable (where the document has already been pre-parsed as an XML document and is ready to be accessed by the Get XML Document Data step).Use this step before the Get XML Document Data step to obtain data from a document formatted using the Extensible Markup Language (XML).
#4 How can you use the Create XML Document step in a fashion that would
let you construct the path of the file and the filename previously in
the script so you could pass it to a subflow ? It would seem this functionality has been killed in UCCX 8
No it hasn't; just concatinate a string to build the Source Document parameter the step needs. Example: "DOC[" + myFilePath + "]" -
I've created a fillable PDF document in XI Pro. I need to change the body of the document and create a new fillable PDF document. When I do that it won't let me create a new PDF. It keeps saying "no new fields recognized. What can I do to redo my document with the changes in the text, but no changes in the fillable fields?
You start with a source / authoring file for the "static" content (e.g., Name, Last:). Say this is an MS Word file.
You master the "static" content..
You keep this authoring file and have a backup of this file.
You output a PDF and use Acrobat to build and fine tune the "form" (form = the form fields, not the "static" content).
The authoring file and output PDF (with form fields) gives you "rev 00".
Now, you must change something in the "static" content.
Open the authoring file and save as to a new version (e.g., "wordfile_v00" becomes "wordfile_v01).
Output this to "pdffile_v01".
Use Acrobat to open the PDF form file "pdffile_v00". Save As to a new file name ("pdffile_v00update").
Using Acrobat XI Pro the click-path Tools - Pages - Replace lets you replace a page or pages of "pdffile_v00update" with a page or pages from "pdffile_v01".
This replaces the "static" PDF page content and does not affect the form fields on the page.
(you may have to adjust position of form fields)
Save "pdffile_v00update" to "pdffile_v01" to reflect the revised status of the PDF form file.
Be well... -
Dealing with small changes to MS Word source file when creating a form
I have an MS Word 2007 file that I converted to PDF in Acrobat Professional 9.0 and converted the PDF to a fillable form. I spent several hours yesterday working with the field types and adding submit buttons/radio buttons, etc. This morning, my supervisor made a few (slight) changes to the source document. Must I start all over again with adding the fields, changing the field types and the submit buttons, or is there an easy way to place the form field data over the new file? Copy and paste the fields into the new file?
The small changes related to some placement of text, and not changes that could be made with the touch-up text or typewriter tools.The steps:
1. Create the new PDF of the WORD document.
2. Open a COPY of the old form.
3. Use DOCUMENT>Replace pages to replace the page of the old PDF with the new PDF document.
4. Save the form.
If you created the form in Designer, this may not work and you may have to look for a solution in Designer (LiveCycle forum). I suspect this may be an issue if you are new to Acrobat and likely ended up making the form in Designer. For a form created with the form tools under TOOLS in Acrobat, the above steps will do the job. Keep in mind that form fields are not a part of the PDF document, but are markup. That is why the replace pages works. -
How to know the source document for pasted page items
Hi,
I want to perform some actions on items before they are pasted (look at persistent data stored on the, if a conflict ask the user and either update or reject).
Believe I'm OK with the paste (document observer, in kBeforeDoMessageBoss where the change is kPasteCmdBoss, set global error code to kCancel to prevent the drop)
But... I can't think of any way to find the source document since the paste is from the scrap db. I've tried kCopyCmdBoss in the observer but that isn't hit (maybe I need to observe the scrap?).
Hope someone can help.
TIA IanI'm afraid there is no silver bullet.
Again: Copy - Paste is actually a two-step copy, from source doc to scrap, then from scrap to destination doc. Only few (other) copy operations go straight from doc1 to doc2.
Just assume the special case that the source doc is already closed and purged for the second copy, your data should by then already be decoupled and self-contained. Besides the user might never actually invoke Paste.
Until CS2 or CS3 there used to be a subject at the scrap root boss, then it was optimized away, so you can't use observers.
As already mentioned above, if you have to translate UIDs especially of your own custom boss class, you can use a reference converter to look up the equivalent object in the target db (by name or other criteria) or eventually create it, then provide the replacement UID.
There might be other means for special objects (text / PasteData, owned item) but I'd have to investigate them myself if I run into the need. -
Changes to Same as Source Printing - CS4
Hello Everyone,
I'm in the process of testing CS4 for deployment to a large print production environment and I'm seeing some interesting behavoir in so far as it's handling of color management is concerned, specifically with Same as Source printing from Acrobat.
I currently have CS2 deployed, and we're using InDesign for page composition. We primarily accept Adobe RGB (1998) and US Web Coated (SWOP) artwork. PDFs are created from InDesign via File > Export, and we have it configured for "No Color Conversion" and "Include all Profiles." As such, our PDFs contain both RGB and CMYK artwork, all of which is tagged with an ICC profile.
In Acrobat 7, we submit these files "Same as Source" to our RIPs (Fiery and Wasatch) in order to preserve the embedded profiles. All of our color management is handled at the RIP. This works quite nicely. We have tested the submissions and the RGB and CMYK builds (color numbers) come through dead on.
With Acrobat 9 Same as Source submissions, we are seeing that the builds are changing, and that we are getting a conversion to CMYK.
-Original PDF file
Raster RGB - 191,45,47
Here are the numbers that are submitted by Acrobat, captured by our RIP:
-Acrobat 7 Same As Source
Raster RGB - 191,45,47
-Acrobat 7 Printer/Postscript Color Management
Raster CMYK- 0,244,245,0
-Acrobat 9 Same As Source
Raster CMYK - 0,242,251,0
-Acrobat 9 Printer/Postscript Color Management
Raster CMYK - 0,242,251,0
-Acrobat 9 Acrobat Color Management
Raster CMYK - 17,248,245,1
So the question is: What changes have been made in Acrobat 9 to cause for it to handle Same as Source print submissions differently? Why is it that our builds are changing when Same as Source has always been how we get "pass through" color from Acrobat?
Has anyone else run into this? From the perspective of a RIP-driven, color managed workflow, this is a serious issue, no?
Mattmattrichards wrote:
I hope that the suggestions that this group is dead are wrong...
We’ve done some further investigations into the differences in Same as Source printing from Acrobat 7 and Acrobat 9. For our tests we created a simple InDesign file with two red vector rectangles, one defined as Adobe RGB (1998) and one as U.S. Web Coated (SWOP). This file was then exported to PDF with “No Color Conversion” and “Include All Profiles.” The resulting PDF contained both rectangles tagged as specified, as verified with PitStop.
We then opened this PDF in both Acrobat 7 and 9 and printed to PS files (at the time, the queue for our HP5500PS was selected). Our cursory findings are:
1. The file sizes differs, which suggests that there is a difference right off the bat.
2. The printed artwork differs visually, which is troublesome.
3. In both instances, when opened in Notepad2, the page objects appear to be tagged properly with Adobe RGB and SWOP specified as the objects color space. This, on the other hand, is good.
a. Acrobat 7
i. RGB – Line 3342
ii. CMYK – Line 3400
b. Acrobat 9
i. RGB – Line 8406
ii. CMYK – Line 8468
4. And here's the biggie: When the PS file created from Acrobat 9 is opened in Illustrator, it says "The document does not have an embedded RGB profile" and it allows for the specification of an RGB profile ONLY. When the PS file created from Acrobat 7 is opened in Illustrator, it says "This document contains objects using both CMYK and RGB color modes. Illustrator allows only one color mode per document. Which color mode would you like to use?" Of course, this PS file SHOULD contain mixed color modes (because it came from a mixed color mode PDF), but only the PS files from Acrobat 7 do. The PS files from Acrobat 9 do NOT. This suggests to us that the PS files (and therefor print data submitted to PS queues as Same As Source) created by Acrobat 9 are not honoring the embedded ICC profiles of tagged artwork.
Does anyone out there have any thoughts or experience? If what we are finding is true, this is a major problem for Adobe's Acrobat 9 print engine.
Matt
Matt,
I think I see why you need PS, maybe to get proper device orientation?
I downloaded your PS files and distilled. The Acrobat 7 is all mystery meat. The Acrobat 9 is calibrated.
It looks like 9 is preserving all the tags, and 7 isn't. So the tags may be your problem. One option is decalibrating everything in Acrobat 9 but it's an extra step.
Maybe Don't Include Profiles out of ID would solve your problem BUT
To me it looks like 9 is doing the right thing (preserving tags), and 7 isn't. Generally you want calibrated output. Maybe your RIP is performing an extra unwanted conversion of the tagged content that's in the PS output from Acrobat 9...
Message was edited by: Printer_Rick - added "performing an extra unwanted conversion" -
API to update ASL attribute source document in 11.5.10.1
Hi All,
We are trying to update the ASL attribute source document, programmatically.
Can you please tell us, which API will be used to do so or any other alternatives?
Thanks & Regards,
GowriHi Helios,
Thank you for the update, actually the problem is solved.
The issue is : Whenever i am trying to show a message in that form using either form personalization or CUSTOM.pll, it is giving the error, if i do any thing else like 'changing the default where clause etc', it is not giving any error. The problem is only with message. Actually my requirement is changing the where clause, which is happening with out any problem. I dropped the idea of showing the message any way.
This problem is strange. Any ways, i am raising an SR with Oracle.
Raj -
Mass change the ownership of the documents ! Thoughts?
Fellas,
I am looking for some information on how mass change of ownership can happen to following documents in Sourcing:
RFx
MA
Ex: Buyer A is the owner of the documents and he/she is no more with the organization. We would like to mass change the ownership of these documents.
My thoughts:
1. Create a report to pull the documents
2. Script to update the owner
3. Schedule a job, so the script can run and update all the documents.
Thanks
GummadiHi Gummadi,
We had same requirement , change the ownership of Master Agreements.
1. Create a report to pull the list for Agreements to be changed with below columns:
DISPLAY_NAME , CALC_METHOD, UNIQUE_DOC_NAME, DOC_TYPE,
STATUS, CURRENCY, VENDOR, CONTACT, LOCATION,
2. Create workbook for Master Agreements, above fields are mandatory for any Mass Change on MA's.
add DOC_OWNER_USER column to the work book
3. Import this work book to CLM/E-Souring.
Hope this will help you.
Thanks
- Sai -
Style source document error when exporting to EPUB
Hey everyone,
I have searched for this error with no luck, so I am hopeful someone here can help. I'm trying to export a book from CS5.5 to EPUB, but I keept getting this error: "Style source document in book is missing." This is not true, the style source document is most definitely not missing. I have tried restarting numerous times and changing the style source document to another chapter, but nothing works.
If it makes a difference, this book was built in CS3 and converted to 5.5.
Thanks for any help!
PeytonIf you are able to export as sections it's almost certainly not actually a problem with the image, but a problem of not enough system resources to finish the job. This is not uncommon with large complex PDF exports.
Try rebooting, then immediately open ID and try the export again first thing. If it works, great. If not, you can combine your sections into a single PDF in Acrobat Pro. -
Editing HTML source document and losing the Server Behaviour details on the panel
Hi,
I just noticed something;
When I bring in and edit my HTML source document, my server behaviour goes back to Coldfusion and the record set and record insertion is missing.
I have to Click and add it back to the panel. Is this normal ?
ThanksHi Murray,
Sorry for the delay in getting back to you. I had to deal with an idiotic poster, each time I try to reply I get the same message from the poster about his facebook account. I have reported it and phone your company - Adobe to resolved this. His post has been deleted from the system and hopefully I am back and able to attend to your replies.
I have moved on and recreated my pages from scratch. I have taken into consideration all your discussion with me and I only have one document. It is named and with an extension of PHP.
I am at a point where I have no errors and found a Dreameaver bug in your Insert>Data> Insert Record option. The form action is written in Captials. As you have pointed out it should be in lower case, so did the validator. So I have recognised this whlist recreating it from scratch.
This is now where I am. I have the form, it works, captures the users input, on click it jumps to the action page but it does not write to database table.
I hope you dont mind, I appreciate your previous 2 post before this reply. Hence, here we are.
Source code.
Why does it not write to the database table?
Please advice.
<?php require_once('Connections/dbAttendance.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "form")) {
$insertSQL = sprintf("INSERT INTO attendlist (Windowsid, title, firstname, surname, extension, mobile, jobrole, course, cpg, mgrname, room) VALUES (%s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s)",
GetSQLValueString($_POST['textfield'], "text"),
GetSQLValueString($_POST['select'], "text"),
GetSQLValueString($_POST['textfield2'], "text"),
GetSQLValueString($_POST['textfield3'], "text"),
GetSQLValueString($_POST['textfield4'], "text"),
GetSQLValueString($_POST['textfield5'], "text"),
GetSQLValueString($_POST['select5'], "text"),
GetSQLValueString($_POST['select2'], "text"),
GetSQLValueString($_POST['select4'], "text"),
GetSQLValueString($_POST['textfield7'], "text"),
GetSQLValueString($_POST['select3'], "text"));
mysql_select_db($database_dbAttendance, $dbAttendance);
$Result1 = mysql_query($insertSQL, $dbAttendance) or die(mysql_error());
$insertGoTo = "Thankyou.php";
if (isset($_SERVER['QUERY_STRING'])) {
$insertGoTo .= (strpos($insertGoTo, '?')) ? "&" : "?";
$insertGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $insertGoTo));
mysql_select_db($database_dbAttendance, $dbAttendance);
$query_rsAttendance = "SELECT * FROM attendlist";
$rsAttendance = mysql_query($query_rsAttendance, $dbAttendance) or die(mysql_error());
$row_rsAttendance = mysql_fetch_assoc($rsAttendance);
$totalRows_rsAttendance = mysql_num_rows($rsAttendance);
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Delegate Register</title>
<link href="Registerpage.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryValidationSelect.css" rel="stylesheet" type="text/css" />
<script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
<script src="SpryAssets/SpryValidationSelect.js" type="text/javascript"></script>
</head>
<body>
<div class="container">
<div class="header"><img src="Cerner At Imperial2.jpg" width="960" height="150" alt="" /><!-- end .header --></div>
<div class="content">
<h3>Register: <?php echo "Date".date("d/m/Y")?></h3>
<form action="<?php echo $editFormAction; ?>" method="post" name="form">
<table width="780" border="0">
<tr>
<td><div align="right">User ID *</div></td>
<td><span id="sprytextfield1">
<input name="textfield" type="text" id="textfield" tabindex="1" size="18" maxlength="10" />
<span class="textfieldRequiredMsg">A value is required.</span></span></td>
<td> </td>
</tr>
<tr>
<td><div align="right">Title *</div></td>
<td><span id="spryselect1">
<select name="select" id="select" tabindex="2">
<option value="0">Select</option>
<option value="1">Ms</option>
<option value="2">Mrs</option>
<option value="3">Mdm</option>
<option value="4">Dr</option>
<option value="5">Mr</option>
<option value="6">Prof</option>
</select>
<span class="selectRequiredMsg">Please select an item.</span></span></td>
<td> </td>
</tr>
<tr>
<td><div align="right">First name*</div></td>
<td><span id="sprytextfield2">
<input name="textfield2" type="text" id="textfield2" tabindex="3" size="30" maxlength="30" />
<span class="textfieldRequiredMsg">A value is required.</span></span></td>
<td> </td>
</tr>
<tr>
<td><div align="right">Surname *</div></td>
<td><span id="sprytextfield3">
<input name="textfield3" type="text" id="textfield3" tabindex="4" size="30" maxlength="30" />
<span class="textfieldRequiredMsg">A value is required.</span></span></td>
<td> </td>
</tr>
<tr>
<td><div align="right">Contact / Bleep *</div></td>
<td><span id="sprytextfield4">
<input name="textfield4" type="text" id="textfield4" tabindex="5" size="30" maxlength="30" />
<span class="textfieldRequiredMsg">A value is required.</span></span></td>
<td> </td>
</tr>
<tr>
<td><div align="right">Mobile no: (optional)</div></td>
<td><input name="textfield5" type="text" id="textfield5" tabindex="6" size="20" maxlength="20" /></td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td><div align="right">Job Role *</div></td>
<td><span id="spryselect5">
<select name="select5" id="select5" tabindex="7">
<option value="0">Select </option>
<option value="1">Doctor</option>
<option value="2">Nurse IP</option>
<option value="3">Nurse OP</option>
<option value="4">Midwife</option>
<option value="5">Booking Clerk</option>
<option value="6">Medical Secretary</option>
<option value="7">OP Receptionist</option>
<option value="9">CNS/NP</option>
<option value="10">Tester</option>
</select>
<span class="selectRequiredMsg">Please select an item.</span></span></td>
<td> </td>
</tr>
<tr>
<td><div align="right">Manager's Name *</div></td>
<td><span id="sprytextfield5">
<input name="textfield7" type="text" id="textfield7" tabindex="8" size="30" maxlength="30" />
<span class="textfieldRequiredMsg">A value is required.</span></span></td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td><div align="right">Course *</div></td>
<td><span id="spryselect2">
<select name="select2" id="select2" tabindex="9">
<option value="0">Select</option>
<option value="1">Demo</option>
<option value="2">Doctors</option>
<option value="9">CNS/NP</option>
<option value="3">Nurse IP</option>
<option value="4">Nurse OP</option>
<option value="5">Midwife</option>
<option value="6">Booking Clerk</option>
<option value="7">Medical Secretary</option>
<option value="8">OP Receptionist</option>
</select>
<span class="selectRequiredMsg">Please select an item.</span></span></td>
<td> </td>
</tr>
<tr>
<td><div align="right">Location *</div></td>
<td><span id="spryselect3">
<select name="select3" id="select3" tabindex="10">
<option value="0">Select </option>
<option value="1">CHX 12 Floor Rm 1</option>
<option value="2">CHX 12 Floor Rm 2</option>
<option value="3">CHX 10 West </option>
<option value="4">HH N207 </option>
<option value="5">HH W12 Conference</option>
<option value="6">SMH Rm a</option>
<option value="7">SMH Rm b</option>
<option value="8">SMH Ming Wing Rm 5</option>
<option value="9">SMH Ming Wing Rm 3</option>
</select>
<span class="selectRequiredMsg">Please select an item.</span></span></td>
<td> </td>
</tr>
<tr>
<td><div align="right">CPG *</div></td>
<td><span id="spryselect4">
<select name="select4" id="select4" tabindex="11">
<option value="0">Select </option>
<option value="1">CPG 1 - Medicine</option>
<option value="2">CPG 2 - Surgery and Cancer</option>
<option value="3">CPG 3 - Specialist Services </option>
<option value="4">CPG 4 - Circulatory Services and Renal Medicine</option>
<option value="5">CPG 5 - Womens and Children</option>
<option value="6">CPG 6 - Clinical and Investigative Sciences</option>
<option value="7">CPG 7 - Private Patients</option>
<option value="8">Others</option>
</select>
<span class="selectRequiredMsg">Please select an item.</span></span></td>
<td> </td>
</tr>
<tr>
<td> </td>
<td><input name="button" type="submit" id="button" formaction="Thankyou.php" value="Submit" /></td>
<td> </td>
</tr>
<tr>
<td><div align="center">*Mandatory fields </div></td>
<td> </td>
<td> </td>
</tr>
</table>
<input type="hidden" name="MM_insert" value="form" />
</form>
<!-- end .content --></div>
<div class="footer">
<!-- end .footer --></div>
<!-- end .container --></div>
<script type="text/javascript">
var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1", "none", {validateOn:["blur", "change"]});
var spryselect1 = new Spry.Widget.ValidationSelect("spryselect1", {validateOn:["change", "blur"]});
var sprytextfield2 = new Spry.Widget.ValidationTextField("sprytextfield2", "none", {validateOn:["blur", "change"]});
var sprytextfield3 = new Spry.Widget.ValidationTextField("sprytextfield3", "none", {validateOn:["blur", "change"]});
var sprytextfield5 = new Spry.Widget.ValidationTextField("sprytextfield5", "none", {validateOn:["blur", "change"]});
var spryselect2 = new Spry.Widget.ValidationSelect("spryselect2", {validateOn:["change", "blur"]});
var spryselect3 = new Spry.Widget.ValidationSelect("spryselect3", {validateOn:["change", "blur"]});
var spryselect4 = new Spry.Widget.ValidationSelect("spryselect4", {validateOn:["change", "blur"]});
var sprytextfield4 = new Spry.Widget.ValidationTextField("sprytextfield4", "none", {validateOn:["blur", "change"]});
var spryselect5 = new Spry.Widget.ValidationSelect("spryselect5", {validateOn:["blur", "change"]});
</script>
</body>
</html>
<?php
mysql_free_result($rsAttendance);
?> -
How can I change one section of the document to a landscape orientation and not the whole document?
How can I change one section of the document to a landscape orientation and not the whole document?
Page Setup, including page orientation, is done in the File menu. The setting applies to the whole document. As Peter says, you can rotate the contents of a page (not including the text layer of a word processing document).
As an alternative, you could use Numbers, where Sheets are empty canvases onto which you may place images, charts, tables and text boxes, and where page orientation may be set for individual Sheets. The main tradeoff is that you lose many of the built-in word processing and page layout features of Pages.
Regards,
Barry -
im trying to change my card details as i have a replacement card but it keeps saying declined once i have put all the information in on my iphone as my laptop is broken and that is the only way i can get into my itunes account. any help would be good as i want to set up netflix for my apple tv
Did u fix it?? I'm having the same problem
Maybe you are looking for
-
Vendor listings by classification
Hi all - we have about 60,000 vendors in our SAP environment - they've been setup with various classifications. Can anyone tell me the tcode to pull up a vendor listing by classification? Please let me know! Thanks
-
Hi I have a new Mac Pro OSX v 10. 5. 5. If I select sleep and then later use keyboard the computor will wake but not the monitor. The only way I can awaken the monitor is to reboot. If I just leave the computor to put itself to sleep there is no pr
-
Sudden problems opening images in RAW?
never had this problem b4 in the past few years, but all of a sudden when I open my images in RAW they have RED BLUE OR Green solid areas inside the picture (seems to be the brightest areas of the photo) and make it difficult to adjust the settings t
-
I am not able to download the free Adobe Digital Editions in order to view the 2012 Master Tax Guide
Once I tried and got done on the status bar but it was not downloaded. The next time the status bar had error on page. Please advise.
-
Hello gurus, i am the BW learner, what are the various types of structures are there? how to create more than one structure in a querey? is the possible to create Structures for Characteristic infoobjects. what is ment by cell editing how to perform