Changing audio pre-sets (i.e. not using easy setup)

Easy setup (DV-NTSC anamorphic) is forcing me to use a 48 hz audio preset and I did not record my video in this setting. How do I change it to 12 hz (I always re-do the audio later, but while capturing, warning window is annoying.)

I did not have all the options clicked. When I did this, the right option popped up.

Similar Messages

  • How do I find and/or change the pre-set voltage selection switch in an HP TouchSmart IQ500 series

    how do I find and/or change the pre-set voltage selection switch in an HP TouchSmart IQ500 series (specifically an IQ524)
    This question was solved.
    View Solution.

    Doesn't it use an external AC Adapter? If so, all you should need to use in another country is an adpater plug to match the wall socket.
    ... an HP employee expressing his own opinion.
    Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

  • How often does Firefox Sync back-up data? I see there is no preference selection allowing you to change the pre-set frequency (whatever that interval may be).

    How often does Firefox Sync back-up data? I see there is no preference selection allowing you to change the pre-set frequency (whatever that interval may be).

    However, the sync action only triggers every 60-minute and there is no user-configurable option provided. Although one can put a Sync icon onto the toolbar for easier access, it is still far from practical needs.
    To unlock this limitation, do the following:
    1) Type “about:config” at the address bar
    2) Search for “services.sync.syncInterval”
    3) Change the value from 3600000 (milliseconds = 3600 seconds = 60 minutes) to any value (in millisecond) of your choice
    4) Close and restart Firefox
    The Sync action will now trigger at the interval you just set.
    from: http://tomtsui.wordpress.com/2011/04/29/modify-firefox-sync-interval/

  • HT204394 How do i add audio to a single slide, not using soundtrack on ipad? but having new audio for each slide, on the ipad (not mac)?

    How do i add audio to single slide on keynote, not using soundtrack so i can have new sound on each slide controlled by my click? Have ipad so cannpt drag from itunes i dont think.

    Troubleshooting Apple Mail
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages

  • Audio head set - computer will not allow me to access it

    My laptop recognises the head set when I plug it in - it correctly identifies it.  The head set has a USB connection.  Why can I not use the head set to listen to music CDs?  The speakers in the laptop are working however I  do not seem to be able to override the speakers to use the headset.  Only had the laptop a month, first HP computer I hve used, what am I doing wrong?  Not a problem I have experienced with other brands.  Any information appreciated - for info the laptop is Pavilion dv7, WIndows 7 64 bit.
    Thank you

    Hi there jeffery152,
    You may find the information in the article below helpful.
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/ht2519
    -Griff W. 

  • How to set dreamweaver to not use CSS?

    I know it is frowned upon to not use CSS, but, the reason why
    I want everything done in HTML is because I want to list my page on
    ebay, and ebay does not support the use of css, or at least it
    seems that way, everything has to be purely done in HTML, is there
    a way to set dreamweaver so that it does not automatically make my
    formating turn to CSS?
    Thanks,
    Bill.

    .oO(BKolos)
    >I know it is frowned upon to not use CSS, but, the reason
    why I want everything
    >done in HTML is because I want to list my page on an
    auction, and this auction
    >does not support the use of css, everything has to be
    purely done in HTML
    If it's about eBay or a similar platform, then in fact you
    can use CSS.
    You just have to add a 'style' element to the page body(!) to
    link to an
    external stylesheet. It's completely invalid HTML, because
    the 'style'
    element belongs to the document's head, but it should work in
    almost
    every browser. And since usually the rest of the auction page
    is invalid
    HTML anyway, it doesn't really hurt either.
    See if this helps.
    Micha

  • Easy Setups in folder, but not in Easy Setups window in FCP?

    Hi all,
    Just got my own copy of FCP, and have been tinkering around and getting familiar with the sequence settings, easy setups, etc.
    I like the concept of the Easy Setups, however I noticed that not all of the Easy Setups from the "Additional Easy Setups" folder in my Applications folder (which came with the install) are visible in application.
    For example, for one organization I edit for, we use a compact HD camera, a Canon VIXIA HF S200, which is AVCHD based, and we shoot in the XP+ setting (1440x1080) at 60i (29.97fps if you prefer).
    When I did work on FCP6 there (I did not bother much with Easy Setups then) we'd be working with the appropriate sequence: ProRes422 1440x1080i60.
    However in toying with these easy setups, the only ProRes 422 Easy Setup showing up is HDV-Apple ProRest 422 1080p24. However, the easy setups folder HAS a 422, 1440x1080, 60i easy setup config file, it's just not showing up in the app.
    Worst comes to worst I'll just manually change the sequence setting because the sequence settings are there, I was just wondering If I had to "install" the additional easy setups or something so they actually appear as easy setups.
    Again, no big deal, just was wondering if anyone knew, thanks!

    Hi -
    The "Easy Set-Ups" are a legacy feature in FCP from when tape based acquisition was standard.
    Since you will be ingesting your HF S200 material via Log and Transfer, and making transcoding decisions there, the Easy Set Up you have chosen is not relevant.
    Once you have ingested your clips, when you place/edit the first clip to a new sequence, FCP will prompt you to match the sequence settings to your source material settings - again, making the Easy Set Up not relevant.
    MtD

  • E2000 won't connect to laptop using Easy Setup Key

    Running Win7. When trying to connect Lenovo laptop to E2000 with Easy Setup Key, the progress bar hangs at 25%. However, the E2000 will connect to the laptop with an Ethernet cable. Same problem on both of my Lenovo G555 laptops. Any ideas?

    I have heard about this concern with Atheros adapters and where it cannot connect with WPA or WPA2. Check if you set the security to WEP if it will connect. (Usually it does). And better check for updated drivers from this website. http://www.atheros.cz/ (manually update the drivers). The automatic update with windows will most of the time load the same driver version. So it would be best to update the drivers manually.

  • Error while trying to synchronize audio and MIDI in GarageBand (Not using MIDI!)

    I get this error message if I try to use any other programs while playing back two tracks in GarageBand. It seems to be related to the level of activity in the other programs (namely, Safari)--if it's trying to load a lot of images or I'm scrolling through a lot of content, the playback gets distorted and this error message pops up.
    This is audio recorded from Skype using Call Recorder. The microphone is a Blue Snowball. I do not have any MIDI devices.
    This didn't used to happen, so I'm not sure what changed. It seems strange that the 3.1 GHz processor and12 GB of RAM on my iMac can't handle playing back audio and browsing the web simulatenously, but maybe that is the case. The audio files are uncompressed, so perhaps that has something to do with it.
    I realize there are a lot of other threads about this, but most have to do with Logic and/or they're recording directly in GarageBand.

    Hello,
    open your Audio MIDI Setup utility and set the input to 44100
    https://discussions.apple.com/message/12710638#12710638

  • Audio sync set to stream not working on timeline

    I'm aware this bug is out, I think I just realized what is the cause.
    An audio wich has been set to sync in stream plays niceley on the timeline, until you move the red bar on top of the timeline to change from one frame to another, this messes up with the audio and strangely makes it to be synced as an Event. If you close an open flash the problem is solved until you agani move the red bar on top with the mouse.
    Or at least that happens to me.
    I hope this was of any help to help debbug this... it's an awfull thing...

    Hi,
    In parameter properties if it is set to false, then it is not an optional parameter.  Normally, parameter which is coming form a query / stored procedure will have a Set to Null Box.  This will allow you to run the query even with a null value. 
    Please try to create a new report with a prompt and check whether it is accepting without giving any value or will it retrive data even if you set to null.
    Even if you have same problem, I suggest you to create a incident / ticket with SAP BO to look at your report or BEx query to idenfity the issue.
    Thanks,
    Sastry

  • How to change the column order in OVS - NOT USING Enhancement Pack 1

    Hi Guys,
    we are currently using NWDS 7.1.
    I cannot seem to chang the order of the columns when the OVS pops up.  We have tried to change the order of the fileds of the custom SAP BAPI that is used for this OVS but no success.
    Please advise on possible changes of the actual BAPI that might help, or things we can do Java side.
    Kind Regards,
    Christiaan

    Hi Christiaan,
    This can be done from Java side in itself.
    This depends on the order in which you add attributes to the node in the context for ovs output.Recreate the context node of ovs output and add attributes one after the other in the same order you want it to appear in the ovs pop - up.That simple.
    Hope this helps.
    Regards,
    Ashok

  • Changing Text on a web page not using textbox

    Hi I am new to programming in Javascript and am just needing a bit of a hand using an onChange event to change some normal text in the middle of a web page. The exmaple is if you have a text box that you can enter in a dollar amount and then once you click out side of the box it will change the total at the bottom of the web page (which is in noraml text) I don't want to put the total at the bottom into a form box to make this work.
    Thanks
    Davo

    One way is using the property innerhtml, but I think this only works properly in Internet Explorer 6. I send you a reference that could helps you:
    http://msdn.microsoft.com/library/default.asp?url=/workshop/author/dhtml/reference/properties/innerhtml.asp

  • Why set up table not used in applications like FI, HR etc

    Hi,
    We all know that we use set up tables for LO Cockpit applications.
    But we dont have for non LO applications like HR , FI...why such a difference is made by SAP...
    One of the fellow suggested that for FI, HR etc, there is huge posting of data and so we dont want to store such a duplicate data
    is this the case?
    or there is some other reason...
    please suggest the same
    Thanking You,
    Tarun Brijwani.

    Hi,
    this question has already been asked a few times. Please search the forums for the answer.
    regards
    Siggi

  • Display Audio - USB setting visible, but not selectable.

    I have my 24" hooked up via USB, the mic pick up works fine. But when I go to the Output and click on "Display Audio - USB" the selection *jumps back* to what I had before, in my case headphones. What am I doing wrong?

    Okay, I had to unplug the headphones from the headphone jack on the front of my tower for the Display Audio Output to work.
    So my next question is, how do I keep my headphones jacked in without them usurping control of the audio output?

  • When viewing a pdf document how do I change the default or pre-set magnification?

    Anytime I am directed to a pdf document by a website it opens the pdf file at 173% magnification. It tells you to open the menu to change the pre-set magnification, but I don't see a menu to open.

    Maybe you did not include enough information in your question or your question was not specific enough since your reply indicates that you have already asked the question and have received an unsatisfactory answer. Please attach a screen shot demonstrating the magnification. Also include written information about where you are seeing the 173% or other magnification value that you are seeing on the image that you attach.
    '''<u>Posting a screenshot</u>'''
    *http://en.wikipedia.org/wiki/Screenshot
    *Windows: http://www.wikihow.com/Take-a-Screenshot-in-Microsoft-Windows
    *Windows 7: http://www.sevenforums.com/tutorials/9717-screenshot-paint.html
    *MAC: http://guides.macrumors.com/Taking_Screenshots_in_Mac_OS_X
    *See: https://support.mozilla.com/en-US/kb/Adding+screenshots
    Save the file as a .png or .jpg image to your hard drive. When you reply, click in the "Screenshot" box below the reply area, and browse to the saved image on your hard drive. NOTE: If you use "Preview" before "Submit", the screenshot will not attach; you must repeat the process of clicking in the "Screenshot" box below the reply area, and browse to the saved image on your hard drive.
    '''<u>Also see these Firefox extensions:</u>'''
    *Abduction!: https://addons.mozilla.org/firefox/addon/3408
    *FireShot: https://addons.mozilla.org/firefox/addon/5648
    *Screenshot Pimp: https://addons.mozilla.org/firefox/addon/12985
    *Screengrab: https://addons.mozilla.org/firefox/addon/1146

Maybe you are looking for