Changing code page of File.

Hi,
I need ur help. I want to know, What is the way to change the code page of any file. and how we can detect code page of any file.
thanks,
Shaan.

>
Hi,
I need ur help. I want to know, What is the way
way to change the code page of any file. and how we
can detect code page of any file.Read the file in using the file's original encoding, then write the file out with a different encoding.
See File, FileReader, FileWriter, FileInputStream, FileOutputStream.
In general, one cannot simply open a file and know the text encoding. If, however, you were to place an encoding tag in the file somewhere, perhaps as a header, you could more easily detect the file's code page.
Regards,
John o'Conner

Similar Messages

How change CODE page in the notify-mails from the VO ?

NW65Sp7
Create TeamGroup with sharefolder.
Confgure Notify over email: Notify - when users put new file.
This work. But i need change CODE PAGE in which this mail send...
Where i can configure this ?
Serg

serg,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com/ to search the knowledgebase and check the other support options available on that page under "Self Support" and "Support Programs".
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

SSIS: Change Code page 1252 ANSI to UTF-8 65001

Hi All;
I have created SSIS Package to import data from OLE DB to a flat file. The code page in the flat file connection manager was set to default
1252 ANSI - Latin I. Now I have been asked to output the flat file in
UTF-8 format. I have changed the code page to 65001 UTF-8 but the package will not run. I got the following message:
the code page on input column COLUMN_NAME (184)is 1252 and is required
to be 65001
I have searched around and i have read that i need to change the column data type from
VARCHAR to NVARCHAR!! Is this the solution?
Is there is any other option? Thanks.

Hello Guys,
i am having the same problem but none of the proposed solutions work for me. the thing is that my source DB is an SQL server DB table that contains Arabic fields the code page of the Source is 1256.
my destination DB is an SQL Compact Edition (with nvarchar fields) the destination page is 1252
if i use SSIS to import Data to the compact DB the arabic fields in the source Arabic destination appear rubbish
if i set AlwaysUseDefaultCodePage to true, an error occurs (cannot be processed
because more than one code page (1252 and 1256) are specified for it )
Please Help!!

Is there a way to re-synch a JSF page definition file with a .jspx page?

I was making changes to my entity object, view object, and then data control on a .jspx page - through all of these changes, the page definition file had information from the old data control and gave errors. I tried 'Rebuild' and I also tried deleting the page definition file to see if it would re-generate - neither of these options worked.
thanks

No that is not possible with Muse alone. YOu can host it on Business Catalyst and upgrade the hosting plan to at least the webMarketing plan for general uploading. If it requires each user to have their own profile etc, then you will need to use BC webApps

How to output FTP file with Code Page 8400?

Hi gurus,
       As we know we can use GUI_DOWNLOAD to download fiel with specific Code Page,
CALL METHOD cl_gui_frontend_services=>gui_download
    EXPORTING
     filename          = 'E:\TEXT.TXT'
*      confirm_overwrite = 'X'
      codepage          = '8400' "Chinese
    CHANGING
      data_tab          = i_file
    EXCEPTIONS
     file_write_error = 1
      OTHERS            = 24.
IF sy-subrc EQ 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
But my question is how to output file into FTP server with specific code page 8400?
call function 'FTP_R3_TO_SERVER'
    exporting
      handle         = p_handle
      fname          = p_filename
      character_mode = 'X'
    tables
      text           = i_file
    exceptions
      tcpip_error    = 1
      command_error = 2
      data_error     = 3
      others         = 4.

Thanks but it is not my anwser
I want to output file to FTP Server with specific code page like
GUI_DOWNLOAD

Changing current page from backing file

Using WL 8.1 SP4
I have a User Acceptance Policy page in my portal, and I want to ensure that users have viewed this page before I allow them to view any other content.
When users have viewed the UAP, I set a session variable. I then use the session variable in my entitlements, so there's no problem with them viewing content they shouldn't.
The problem I have is that if users try to access a page directly (or their session has expired), they're left with a blank page (as they're not entitled to see anything), rather than being sent to something helpful (i.e. the UAP).
So I need a backing file. It can either be on every page (except the UAP), or I can put it on the book - whatever is recommended.
I've tried this as a page backing file:
public class UAPCheck extends AbstractJspBacking {
public boolean handlePostbackData(HttpServletRequest request, HttpServletResponse response){
PageBackingContext pbc = PageBackingContext.getPageBackingContext(request);
if (pbc.getLabel().equals("uap_page")
|| request.getSession().getAttribute("UAP Accepted") != null){
return true;
} else {
pbc.setupPageChangeEvent("uap_page");
return true;
I've applied this to pages in my book, however nothing happens - the page change request never fires!
So what's happening here? Am I misunderstanding what setupPageChangeEvent is for?
Help is appreciated.
darren

In the past I have done it as follows:
1. Create a backing file for the book that has these pages.
2. In the preRender of the backing file do the following
BookBackingContext bbc=
BookBackingContext.getBookBackingContext(getRequest());
if( //check to see if page change event is needed)
{PageBackingContext pbc_current =
        bbc.getActivePageBackingContext();
    pbc_default.setActive(false);
    PageBackingContext pbc_pageToBeShown=
        bbc.getPageBackingContextByDefinitionLabel("//
        def label of page to be shown, in your
        case 'uap_page'");
    pbc_pageToBeShown.setActive(true);
    return true;
else return true;
3. link the backing file to book
Recommendations:
* Don't use backing files for Portal components if they are not needed. (From your post, if I am not wrong, you are using backing files for all pages in the book which is not necessary and can cause unnecessary complications)
* Read this doc to understand life-cycle methods of portal components http://edocs.bea.com/wlp/docs81/pdf/taxonomy.pdf
Peruse the above document to understand what is going wrong with your code.
* Remember that the life cycle methods for components that are not active will not be rendered if treeOptimizationEnable parameter is set to true ( this parameter can be seen in workshop under property editor)
* When calling one of the setupxxevent methods, it must be done on the backing context that the backing file is tied to. If you do not do this the event may not get fired. For more info click http://e-docs.bea.com/wlp/docs81/whitepapers/netix/body.html
Seenu
Seenu.

SMB Code Page settings cannot be changed

We have a OSX standalone server 10.5.4 that's running SMB service.
Otherwise it runs ok, but I just cant change the Code Page -setting on advanced -tab of SMB settings. I can choose the desired code page from the list, but when I click "Save", the selection changes back to "Latin US (437)".
That's really annoying because it makes some folders unaccessible for win clients. So is it a bug or am I just doing something wrong?

Check the files /etc/smb.conf and /var/db/smb.conf (which is included by the /etc one) -- I found that when I used Server Admin to change the Code Page setting, it changed the "dos charset" setting in /var/db, but not the one in /etc, and I'm not sure how smbd interprets the conflict. If you have a similar conflict, you could try hand-editing /etc/smb.conf to either remove or "fix" the "dos charset" value.
No promises, but that's what comes to mind...

How to change the code page on windows 2008 r2 ?

How do I configure a specific code page on windows 2008 r2 ?
I understand that I can go into control panel and change regional settings but if want to change the code page from one codege to say CP850 how do i do that ?.
There is no option in the control panel to select code page ?
Thanks

Hi,
I have followed the below steps which did not cause any issue to my server. Have a full latest backup and then follow the below steps.
Create a start up batch file that includes all the commands you want.
Then edit the registry to point to your start up file.
http://technet.microsoft.com/en-us/library/cc779439%28WS.10%29.aspx
c:\startup.cmd
@echo off
chcp 437
HKLM\SOFTWARE\Microsoft\Command Processor
AUTORUN="C:\startup.cmd"
Thanks,
Umesh.S.K

Code page issue - Unix file(s) content display in a report output

Hi All,
I am trying to retrieve file from Unix server and display in my report output.
I have written code as below:
OPEN DATASET filename FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
READ DATASET filename INTO i_tab-line.
ENDDO.
CLOSE DATASET.
1. Now i am able to display files of type .txt in report output but with line numbers above each line.
How can i avaoid it! I want to display as it looks in AL11 view.
2. If i am displaying files of type .PDF it is giving dump with below message:
A character set conversion is not possible.
At the conversion of text from code page '4110' to '4102' is not possible.
- a character was found that cannot be displayed in one of the two code pages;
- or it was detected that this conversion is not supported.
How can i display the .PDF (or) all types of files in my report as it is viewable in AL11.
Can anybody solve this this.
I have tried UTF-8 & NON-UNICODE options with ENCODE also they are also giving same dump.
Can anybody resolve these issues!
Thanks in advance.
Thanks,
Deep.

Hi All,
Any resolution for above posted issue!
Thanks,
Deep.

How to change the default code page in SAP?

My colleague tries to download a report in Excel but she is having some problems with the output as each of the lines are all included in one cell. When I download the same report, my output is fine and the columns in the lines are properly aligned in various columns in Excel.
I noticed that her code page is 4110 and mine is 1160.
4110 Unicode UTF-8
1160 Microsoft 1252, Superset of ISO 8859-1
As a workaround, I just asked her to modify the code page to 1160 everytime she downloads a report. I want to know how this setting is derived.
My questions are:
1) Is there a way to set the default code page?
2) Is this a problem with the SAP version? If she downloads another SAP GUI, will the issue be gone?
Thanks!
Joey

1, You can change the codepage in SAPGUI: Select the system => Properties => Others
2, Could be, best is to have the same and most up to date SAPGUI for all

How to change a Code Page in SAP SCRIPT ?

I have a specific requirement, would need your help :
There is a CODE PAGE which is getting assigned to the SAP SCRIPT FORM. For E.g : 1100 is generally used for SAP SCRIPTS.
I would like to know if there is a possibility to change the Code Page based on certain conditions ??
Also i would like to know how and where is a CODE PAGE and SAP SCRIPT FORM linked.
I have analysed that a default code page can be set in the SAP LOG ON PAD but not able to find the issues mentioned above.
Kindly help me out with your valuable suggestions and solutions.
Thankyou
Brijesh.

Hi,
MDMP means Multi Display Multi Processing. See the note system for details. The problem of MDMP is that the different languages use different codepages and not all characteres can be displayed in every codepage.
A solution would be a unicode conversion of the system. In unicode there is only one internal codepage, which contains all special characters of the individual languages. However the migration needs several hours of down time and unicode systems need more memory and disk space. I can't tell you a percentage for that. You need at least R/3 4.7 for unicode.
In non-unicode system I believe you can't change the codepage inside a SAPscript document directly. I would have to end form processing an start a new form. To change the language you can try the ABAP-command SET LOCALE. Also see the language parameter in START_FORM.
If that doesn't work I would try using RFC-Connections. Make RFC-Connections in your system which contain the system it self as target system, but with the desired language filled in. You do not need to provide a user or password, that would be taken form the logged on user.
Inside your printing program you put the real printing into a function module. Your report then can call the function via RFC using a connection in the correct logon language.
Greetings

On Firefox, i wish to edit details in the 'Page Source' file (CSS) and save the changes. Please help...

I am viewing a crossword(HTML file) prepared by me, on FIREFOX. I wish to change the color of the blank squares (which are black now), to improve the appearance of CW. I have located the appropriate place on the "Page Source" file for effecting the change. ''But, I am not able to effect the change, as the file does not accept the editing.'' Please, advise
how I can effect the change and also save the changes effected...Thanks

It is View > Page Source and not Edit > Source, so you can't make changes to the source in Firefox. 
You will have to do that via an external editor. 
You can also override CS style rules with the Stylish extension.
* https://addons.mozilla.org/firefox/addon/2108 - Stylish

How do I change the size of file menu's and tool icons in Photoshop' opening page.

How do I increase or change the size of file menu's and tool icons on the opening page/worksheet of Photoshop? The File Menu drop down commands read properly at a comfortable size. I am not sure how I accomplished this, but everything I have tried has no effect on the other page items.

Hello, you can change most of Photoshop's interface text by going to preferences>interface>UI font size.
For the size of the top menus and the whole interface, there is no function to do that for the moment. I suggest to vote on this thread: http://feedback.photoshop.com/photoshop_family/topics/problem_with_hi_res_monitors

Htmldb page with 'File Browse' hang on submit change

I have a htmldb page with 'File Browse' item. With File Browse empty, on pressing submit button with which has 'SQL UPDATE' action and returning to same page branch, the page hangs.
It also happen on File Import page of htmldb application itself with File Browse.
Anyone have the same problem or know why?

I'm working with Sashisu on our problem and I wanted to give a few more details on what we've found.
-We're using HTMLDB 1.6
-The problem occurs only on pages with a file upload page item.
-When clicking a link on one of the problem pages the browser will stick on retrieving the page for 1-2 minutes, then ultimately it will end in a page cannot be displayed error.
-Sometimes the page will not hang and go directly to the page cannot be displayed error.
-After encountering the error, clicking back to return to the page and then retrying the link will successfully load (and upload the file) the next page.
-The problem only happens in IE 6.0. The submits work fine in FireFox.
-Our development servers do not have this problem using the same HTMLDB code. The configuration between the servers on Development and Production is similar but not exact (we're working on finding the delta).
-We did not have this problem on production until a recent code update.
Thanks in advance,
-John

Regarding the File Adapter with Code Page problem

Hi All,
I have a scenario where I am processing file at receiver end. The code page of the file is Cp037. When I try with this, I am facing the problem. Is there anyway where I can chage the code page of the file which is to processed by File adapter receiver.
I have one idea but I don't know whether it is possible or not. It is to use XML Anonymizer Module.
Please get back to me with your ideas.
Regards,
Achari

Hi Achaari,
Cp037 ( EBCDIC ) is not a basic but an extended encoding set which might not be supported by the file encoding parameter at the receiver file adapter.
Either you can try the code page conversion using java code as mentioned in this[ post|Code page conversion;
Please refer Problem with EBCDIC
Michale's reply and the sriram's reply which talks about some work around using .BAT files.
Regards,
Srinivas

Changing code page of File.

Similar Messages

Maybe you are looking for