Changing default values in Drop Shadow

When using Drop Shadow in the Motion tab of the viewer I find that I never have used the default settings of the Offset or the Opacity. Seems like there must be a way to change these settings permanently so they come up to some more convenient settings.

I probably should have thought of that a long time ago. Darn good idea. Feel kinda dopey for missing that one. I use the favorites for transitions but never thought of putting the Drop Shadow in there.
Still, is there a way to change the defaults much like you can change the default length of stills that are imported? It would be useful on so many tabs in Motion and Filters.

Similar Messages

Changing default value DropDownbyindex in wdinit in view

Hi everyone, I'm using drop down by index in a view. It has many values but I want to change default value.
I think that I have to simulate an action on dropdownbykey like select a value.
Can i retrieve the index of an element of nod passing his value?
Thanks a lot.

hi ,
u can try looping into the internal table .
u must be having that dynamic value ,suppose lv_sysid, based on which u want to set the index
thn u can proceed like this :
DATA : itab_sys     TYPE STANDARD TABLE OF z2ts_systems .
*   populating internal table
    SELECT *
     FROM z2ts_systems
      APPENDING TABLE itab_sys.
DATA : lv_index type i .
    clear wa_sys.
LOOP AT itab_sys INTO wa_sys.
    IF wa_sys-SYS_ID = lv_sysid.
      lv_index = sy-tabix.
    ENDIF.
here I have compared the work area value to lv_sysid
lv_sysid is the value based on which u want to set ur index
thn u can proceed to set the lead selection to lv_index.
rgds,
amit

How to set default value for drop down box in jsf

Hi,
Can anyone help me to set the default value in drop down box using <af:selectManyChoice> ?
As I know there is an unselectedLabel attribute in <af:selectOneChoice> but not valid attribute for <af:selectManyChoice>.
Any help must be appreciated.
Regards,
AK

Hi Frank
My entity type is a List in managed bean. I have set the entityType in the constructor of the managed bean. I have attached my code here.
TPSearchCriteriaBean.java****************************************
/** Constructor */
public TPSearchCriteriaBean() {
super();
entityType=new ArrayList<String>();
entityType.add(UIConstants.LIST_ITEM_ALL);
authorizationType=new ArrayList<String>();
authorizationType.add(UIConstants.LIST_ITEM_ALL);
companyType=new ArrayList<String>();
companyType.add(UIConstants.LIST_ITEM_ALL);
mrgStatus=new ArrayList<String>();
mrgStatus.add(UIConstants.LIST_ITEM_ALL);
legalStatus=new ArrayList<String>();
setEntityType(entityType);
setAuthorizationType(authorizationType);
setCompanyType(companyType);
setMrgStatus(mrgStatus);
country = "0";
//address = new AddressBean();
UIConstants.java***********************************************************
public static final String LIST_ITEM_DEFAULT = "select";
public static final String LIST_ITEM_ALL = "0";
LOVManager.java*****************************************************************
public List<SelectItem> getLovList(String lovType, boolean requiredOption_SELECT, boolean requiredOption_ALL)
log.debug("LOV loading for " + lovType + ": START");
List<SelectItem> lovList = new ArrayList<SelectItem>();
//check validity of lov loading request
validLov:
for (int i = 0; i < lovTypeArray.length; i++)
if (lovTypeArray.equals(lovType))
break validLov;
log.debug("ERROR: LOV Type not valid.");
return lovList;
//First select is replaced by ALL here
//<-- Select --> should be an option
if (requiredOption_SELECT)
lovList.add(new SelectItem(UIConstants.LIST_ITEM_DEFAULT, "--Select--"));
LOVDao dao = new LOVDao();
dao.loadLOVValues(lovType, lovList);
log.debug("LOV Loading successful!");
//<ALL> should be an option
if (requiredOption_ALL)
lovList.add(new SelectItem( UIConstants.LIST_ITEM_ALL, "ALL"));
return lovList;
Kindly help me.
Regards,
AK

How to change default value in a table using ALTER TABLE

Hi,
How to change default value in a table
I have a table TEST which has 2 fields CODE of Datatype VARCHAR2(10) and Indicator as VARCHAR2(1).
I want to change the default value using ALTER TABLE TEST of field Indicator to 'I'.
Any help will be needful for me
Thanks and Regards

user598986 wrote:
Hi,
How to change default value in a table
I have a table TEST which has 2 fields CODE of Datatype VARCHAR2(10) and Indicator as VARCHAR2(1).
I want to change the default value using ALTER TABLE TEST of field Indicator to 'I'.
ALTER TABLE test
MODIFY (indicator DEFAULT 'I');
Incidentally, INDICATOR is a keyword in Oracle, so you may have problems using it as a column name. If so, you'll have to enclose the column name in double-quotes, and be careful to use capital letters inside the quotes.
Edited by: Frank Kulash on Aug 26, 2009 11:42 AM

[svn:fx-3.x] 10868: change default value of selectable in ASDoc comment to true

Revision: 10868
Author:   [email protected]
Date:     2009-10-05 11:05:50 -0700 (Mon, 05 Oct 2009)
Log Message:
change default value of selectable in ASDoc comment to true
QE notes: -
Doc notes: -
Bugs: -
Reviewer: -
Tests run: - checkintests
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/controls/TextArea.as

Thank you much for your response.
I tried that and it did work. But my requirement is to have a user input the date. The basic idea is if the user decides on a predefined time range like Day Shift Today or Yesterday and so on... then the report would automatically calculate the values based on predefined date time values. On the other hand, if the intent is to run the report for an arbitrary period then the user supplies the date and time limits.
What I am trying to achieve is have the same parameter available for user input , but when the User decides he wants Predefined then the "textbox" populates with date and time as per his choice of predefind range.
I understand that by this the user can still overwrite the date and time on the text box, but the report will run the predefined values as long as he has the @PredefinedDateSelection Set to true.
Is there a way I can impement this?
Once again I thank you and appreciate your input.

[Forum FAQ] How do I change default values shown in Report Delivery Options?

Introduction
Some users want to change default values shown in Report Delivery Options when creating standard subscriptions. Someone might want to always Cc the report to a specified user without sending the report URL. So they want to display those default values display
automatically when creating standard subscriptions like below.
Solution
To achieve this goal, please embed JavaScript code into the SubscriptionProperties.aspx file to change those default values (By default, the file’s location is: <Installation directory>\Reporting Services\ReportManager\Pages\SubcriptionProperties.aspx).
The example below will show how to set default values for “Cc” field and “Include Link” field.
Before coding, pleas find out the corresponding HTML tags of the two fields in the browser using IE Developer Tools.
Get “Cc” field with its corresponding HTML tag
Get “Include Link” field with its corresponding HTML tag
Embed such a code snippet at the end of the existing code within the SubcriptionProperties.aspx file
<script runat="server">
protected void Page_Load(object sender, EventArgs e)
Page.ClientScript.RegisterStartupScript(typeof(Page),"MyScript", "var cc = document.getElementById('CcEmailAddressesID');cc.value = '[email protected]';var IncludeLink = document.getElementById('ui_cbIncludeLink');IncludeLink.checked
= false;",true);}
</script>
Create a new subscription to check the default values shown in Report Delivery Options
Applies to
Reporting Services 2005
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012
Reporting Services 2014
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

How to Change a Default Value from Drop Down Box displayed in Web Dynpro?

Hi,
How to Change a Default Value from 'High' to 'Low' in a Drop Down Box for RANGE field displayed in Standard Web Dynpro Component. I saw a Default Value set for a RANGE field in View Context When I select that field and click on Display. I am seeing Default Value set it to 'HI'. Please let me know how to change from HIgh to Low.
I appreciate your help!
Thanks,
Monica

hi,
use the set_attribute( ) method now to set the attribute with a particular key eg HIGH in ur case
// u can use the code wizard( control +f7) this code will be auto generated when u select the
//radio button to read the context node
DATA lo_nd_cn_node TYPE REF TO if_wd_context_node.
DATA lo_el_cn_node TYPE REF TO if_wd_context_element.
DATA ls_cn_node TYPE wd_this->element_cn_node.
* navigate from <CONTEXT> to <CN_NODE> via lead selection
lo_nd_cn_node = wd_context->get_child_node( name = wd_this->wdctx_cn_node ).
* get element via lead selection
lo_el_cn_node = lo_nd_cn_node->get_element( ).
* set single attribute
lo_el_cn_node->set_attribute(
name = `ATTribute name.`
value = 'LOW' ).
it will solve ur query ..
also refer to this component
wdr_test_events -> view dropdownbyidx and dropdownbykey ->method name onactionselect.
regards,
amit

How to change default value of a parameter and LOV attached to a parameter

Hi All
I am new to discoverer reports and I need to accomplish the following tasks:
1. Need to change the SQL query of a discoverer report
2. Need to change the default value of parameter ( from constant to current month). In the discoverer plus responsibility when I open the report and go to tools>>parameter>>edit
I can see the constant default value given there. On the right hand side there is a drop down which says 'Value'. I guess if i need to put a SQL as defaul value I need to change the drop down to sql or something and then put the SQL. Problem is the drop down is froezen and I cannot change it.
Even if I try to create a new parameter/report.
3. Need to change the LOV associated to the item on which the parameter is based.
I have the discoverer plus responsibility attached to myself and do not have the discoverer administrator tool (desktop developer tool like forms 6i). My questions are:
1. Can I change the SQL query by using discoverer plus responsibility or do I need discoverer administrator tool?
2. Any help on how to get the default value from an SQL query? currently it is a constant value.
3. Is there any way to figure out is the LOV is madeup of fixed constant values (like independednt value set) or they are fetched from some sql query(table validated value sets)?
Any pointers/solutions will be highly appriciated!!!
Thanks in advance.
Thanks and Regards,
Shashank

HI,
Need to change the SQL query of a discoverer reportThe discoverer generate the SQL according to the item, calculation and conditions designed in the worksheet.
You cannot edit a specific worksheet SQL.
In order to change the SQL you need to change the worksheet using the "Edit-> worksheet" from the menu.
To change the SQL generated inside the folders you need to do that using the administrator.
Need to change the default value of parameterYou cannot use SQL statements for the parameter default value. it is not supported. if you need default you can use only constant (as it was). otherwise you can set the parameter to be optional and then add to this condition an OR saying that <item>= NVL(:Parameter,<your default>)
as <your default> you can use calculations so that if for example you want the current date you will create a calculation containing: SYSDATE.
Is there any way to figure out is the LOV is madeup of fixed constant values (like independednt value set) or they are fetched from some sql query(table validated value sets)?They are based on SQL, even they are const then you will see it as
select 'a','b'... from dual
you can find the LOV (called item classes) in the administrator.
Go to the item your condition is based on and see its properties.
In the properties you should see the item class it uses.
Close the properties and go to the item classes tab, search for this item class and figure the folder it came from.
This is the folder you need to change in order to change the LOV.
Hope it helped a bit, you sure asked several big questions...
Tamir

How to change default value in contract by T-code ME32K?

Dear my freinds,
If you have one exist contract and then you use ME32K to change it, you will get default value for material group, plant and storage location in contract.
If you have one materail 1002 at plant AUXX and storage location 0001 in contract already, then you can see these value will be in contract below:
10     M     1     EA     0.00     1     EA     2B0880700     AUXX     0001
20     M                                                                                  2B0880700     AUXX     0001
30     M                                                                                  2B0880700     AUXX     0001
Our user does not want to display default value for filed material group, plant and storage location in contract by T-code ME32K.
Could you give me kind idea how to avoid it? which is really appreciated!
Thanks in advance!

Hi Nick,
Thanks for your idea, I agree with you that it may be fixed by user exit and is not worth to do it, but i only want to know how to do it easily, hopefully I can get answer from you...
Thanks!

How to change default value in "Project file" dialog

I'm new to Labview, and I've encountered an example with a dialog that allows to define a path to a file. If I open the properties on the block diagram of this block the name of the block appears to be "Path Properties: Project file:" The default value points to a different place than where the file installed and the VI won't run untiI I change the path. If I save and open the file, it doesn't remember the change. When the vi is running I can right click the text and there is an option to reinitialize to default. I've rooted around all over the place and can't find where this can be set or changed. How do I change this?

On the front panel, change the control to the desired value.
Now, right click on the control, select Data Operations and Make Current Value Default.
-Matt Bradley
************ kudos always appreciated, but only when deserved **************************

How to change default value in form

Hi,
I want to change the default value in form..how can i do this?
Fo exa...in purchasing when we go to auto create..in action tab we see create been defaulted whenever we open the form and also there is one more option called add to...so whenever i open this form..i want to see add to there..
How can we get this?please advise?
Thanks
Mahendra

You can do it using forms personalization.

How to change default values in SCC?

Hi,
does anyone knows how to change the default values of the Sybase Control Center e.g.:
Activation Code Expiration (Hours) – indicates how long an activation code is valid. The default is 72 hours.
Within SCC the field is deactivated, it's changeable after creating a connection, but I need to set it within the connection template.
Thanks in advance, Christian

You're right, but we want to change the default setting of the template, to avoid this step.
Thanks, Christian

How to change default value of requested delivery date in va21 create quo

hi experts,
My requirement is simple, to add one day to the default value of the Req deliv date under "General header data" in VA21.
I modified MV45AFZZ (an include in SAPMV45A).
I added this code:
if sy-tcode eq 'VA21'.
case screen-name.
    when 'RV45A-KETDAT'.
     write reqdate to RV45A-KETDAT.
   screen-input = 0. "don't let user change it back.
   screen-active = 1. " but let user see the field and the
endcase.
endif.
reqdate is the new value for RV45A-KETDAT which is sy-datum + 1.
This code does'nt actaully change anything. I tried to change other values of other fields using the same code and it works. Is RV45A-KETDAT the correct field to use?
Thank you in advance.

You don't need to do that via user exit. You can configure the RDD defautls by document type in SD config, and adding 1 day to the current date is very simple. You can continue to use the FIELD_MODIFICATION user exit to lock down the field.
Also, as a general practice in the sales exits, don't use SY-TCODE, use T180-TCODE or T180-TRTYP, even if you're not using BAPIs to create documents.

.INI files vs .TXT files for changing default values in a .EXE?

Hi,
I have a two-part question related to updating the default values of controls in an executable:
I am creating a LabVIEW executable for installation on two different production-floor computers.   I need to be able to change the default values of the front panel controls (as I would do with the “make this value default” command during development). From reading prior posts, I understand that I could use the “Write Configuration Settings File.vi” and “Read Configuration Settings File.vi” to generate a .INI file that would be read by the .EXE and would establish the desired values of the controls. However when I took a look at the block diagrams for those configuration .VIs, they don’t appear (to me) to be any easier to use than just reading values from a spreadsheet file. IE: Instead of using these configuration files and a .INI file, could I not instead just read values from a .TXT file that contains the desired values?   I’ve never used a .INI file before, or had to worry about “keys” and “sections,” so from my (perhaps naïve) perspective, the .INI method seems less easy to use. Is there any advantage to the .INI format?
Regardless of whether I use the .INI file or a .TXT file, I have this additional problem: One of the things that changes when I install my .EXE file on a new computer is the COM port numbers used by two serial devices.   (On my development computer, the two serial devices use COM5 and COM6, whereas on the two production-flood computers, the COM ports will almost certainly be different).   I suppose I could use the Device Manager on the production-floor computers to change the COM ports to be the same as those on my development computer, but I’d prefer to be able to (again) change the default value of the COM ports in my .EXE.   However, I’m not sure how to do that.   The configuration VIs, have options for reading / writing Booleans, strings, paths, and numeric, but not, (so far as I can tell) for a VISA class.
Any thoughts / suggestions are welcome. Thanks.
Solved!
Go to Solution.

Dan_the_Clam wrote:
Thanks for your reply, Yamaeda,
Great that I can use a string to open a VISA session - I had no idea. I'll try that.
And - ah - you are right about the .INI files. I just did an experiment in which I re-ordered the sections and randomly changed which letters were capitalized in the key values, and the "read configuration settings.VI" still read the file correctly. Thanks for that.
Unfortunately, in my existing code, the controls on the block-diagram aren't all co-located together; they are scattered throughout the block diagram - some of them in case structures and loops.   I suppose that means I'll have to move them all to the left side of the block diagram, route them to these "Write Key.VIs" and then wire them up into the cases and loops with fairly long wires.   It's just a hassle, and is going to make my block diagram more complicated.  Well, I suppose that's how one learns...
Thanks again.
dan
Assuming you have a state machine and an Init state it's a fair use of Local Variables to update controls from the ini-file. The same goes for saving the values.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Change default value for no of records in T code KSB1

Hi,
I am trying change the default value (no of records) in T code KSB1.
Is it defaulted progarmatically or through some configuration?
Any help is appreciated.
Thanks
Govind

Thank you all for immediate reply.
I know that I can create a variant or change the value by hitting more settings.
I have also seen in the program and its hard coded there as 5000.
We need that value to be defulted as 10000.So my question is that can we change via configuration or it can be done only progamatically?
Thanks
Govind

Changing default values in Drop Shadow

Similar Messages

Maybe you are looking for