Changing font in classical report

hi,
can we change the font of the output in a write statment?how?
thx & regards,
balaji.s

Not possible in classical report
check this option....
Be aware that the PRINT-CONTROL is not supported in SAP Enterprise 4.7
For your information, SAP cannot provide any support to error caused by print control command (see SAP OSS notes 66478). * Parameters for function below should be taken from your printer
configuration in SAP - check SPAD transaction -
standard print control
print-control position 1 function: 'CI006', 'SF015'.
Submitted by : SAP Basis, ABAP Programming and Other IMG Stuff
http://www.sap-img.com
REPORT ZFONT NO STANDARD PAGE HEADING LINE-SIZE 80 LINE-COUNT 65.
Start of print-control
NEW-PAGE PRINT ON.
PRINT-CONTROL FUNCTION 'SF000'.
WRITE: / 'This is CPI 20'.
SKIP.
PRINT-CONTROL FUNCTION 'SF020'.
WRITE: / 'This is CPI 6'.
SKIP.
PRINT-CONTROL FUNCTION 'SF008'.
WRITE: / 'This is CPI 12'.
Depending on your SAP printer device, this may also work
PRINT-CONTROL FONT 1 LPI 6.
you can try to change font and LPI numbers
WRITE: / 'font 1 lpi 6'.
PRINT-CONTROL FONT 2 LPI 6.
WRITE: / 'font 2 lpi 6'.
PRINT-CONTROL FONT 3 LPI 6.
WRITE: / 'font 3 lpi 6'.
End of print-control
NEW-PAGE PRINT OFF.*--- End of Program
Regards
Vasu

Similar Messages

How to Change Fonts in Oracle Reports

Hi All,
When ever i am changing fonts in my report it reflects me when i run them on reports builder installed on my local machine.
But when i put them on application server, these changes are not reflected. I am generating PDF reports.
Can some body help me what should i need to do to reflect the font changes.
Thanks in advance.
Regards
Kamal

Hi Kamal,
Whether the font used in the report is installed in the machine where Apps server is installed? If not , use the feature ' PDF Aliasing' to substitue for that particular font.
For more information on this, have a look at the chapter "Managing Fonts in Oracle Reports" in Publishing Reports Manual. You can download it from http://download.oracle.com/docs/pdf/B14048_01.pdf.
Thanks,
Vidya Viswanathan

Change of font in classical report

Hi experts,
please any one let me know how i can change the font options in out put display of a classical report.
advanced
thanks
vijay

Hi Vijay,
We cant change the font size of display But we can change the print size while printiing.
Please follow the process.. After displaying the report goto LIST->Print->Properties--->General Properties -
> Format
Please create new font size as per ur requirement and assign it here.. U can send it these thing thorugh program also.
Regards,
Srinivas

Increasing Font in Classical Report

Hi friends,
I need a small help.
Can we increase the font size of ABAP Classical Report ?
I have tried the PRINT-CONTROL FUNCTION 'SF000'.
But,of no use.
Can we really increase the font size of ABAP Classical Report ?
Regards,
Imran.

Be aware that the PRINT-CONTROL is not supported in SAP Enterprise 4.7
For your information, SAP cannot provide any support to error caused by print control command (see SAP OSS notes 66478). * Parameters for function below should be taken from your printer
configuration in SAP - check SPAD transaction -
standard print control
print-control position 1 function: 'CI006', 'SF015'.
Submitted by : SAP Basis, ABAP Programming and Other IMG Stuff
http://www.sap-img.com
REPORT ZFONT NO STANDARD PAGE HEADING LINE-SIZE 80 LINE-COUNT 65.
Start of print-control
NEW-PAGE PRINT ON.
PRINT-CONTROL FUNCTION 'SF000'.
WRITE: / 'This is CPI 20'.
SKIP.
PRINT-CONTROL FUNCTION 'SF020'.
WRITE: / 'This is CPI 6'.
SKIP.
PRINT-CONTROL FUNCTION 'SF008'.
WRITE: / 'This is CPI 12'.
Depending on your SAP printer device, this may also work
PRINT-CONTROL FONT 1 LPI 6.
you can try to change font and LPI numbers
WRITE: / 'font 1 lpi 6'.
PRINT-CONTROL FONT 2 LPI 6.
WRITE: / 'font 2 lpi 6'.
PRINT-CONTROL FONT 3 LPI 6.
WRITE: / 'font 3 lpi 6'.
End of print-control
NEW-PAGE PRINT OFF.*--- End of Program
Reward points if helpful
Message was edited by:
taranam dhindsa

Changing font in Oracle Report in PDF output

Hi,
I have created reports using dev10g(report builder). I can run report from client side in pdf format but I want to change the font (i.e from courier to Arial narrow).
How can I do this?
Is there anyone who can help me?
my unifont.ali file is:
# $Header: uifont.ali@@/main/22 \
# Checked in on Tue Jan 8 15:32:42 PST 2002 by idc \
# Copyright (c) 1999, 2004, Oracle. All rights reserved.
# $
# $Revision: tk2/admin/uifont.ali#0 $
# Copyright (c) 1994, 2004, Oracle. All rights reserved.
# All Rights Reserved.
# DESCRIPTION:
# Each line is of the form:
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet> = \
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet>
# The <Face> must be the name (string/identifier) of a font face. The
# <Style>, <Weight>, <Width>, and <CharSet> may either be a numeric
# value or a predefined identifier/string. For example, both US7ASCII
# and 1 are valid <CharSet> values, and refer to the same character set.
# The <Size> dimension must be an explicit size, in points.
# The following is a list of recognized names and their numeric
# equivalents:
# Styles Numeric value
# Plain 0
# Italic 1
# Oblique 2
# Underline 4
# Outline 8
# Shadow 16
# Inverted 32
# Overstrike 64
# Blink 128
# Weights Numeric value
# Ultralight 1
# Extralight 2
# Light 3
# Demilight 4
# Medium 5
# Demibold 6
# Bold 7
# Extrabold 8
# Ultrabold 9
# Widths Numeric value
# Ultradense 1
# Extradense 2
# Dense 3
# Semidense 4
# Normal 5
# Semiexpand 6
# Expand 7
# Extraexpand 8
# Ultraexpand 9
# Styles may be combined; you can use plus ("+") to delimit parts of a
# style. For example,
# Arial..Italic+Overstrike = Helvetica.12.Italic.Bold
# are equivalent, and either one will map any Arial that has both Italic
# and Overstrike styles to a 12-point, bold, italic Helvetica font.
# All strings are case-insensitive in mapping. Font faces are likely to
# be case-sensitive on lookup, depending on the platform and surface, so
# care should be taken with names used on the right-hand side; but they
# will be mapped case-insensitively.
# See your platform documentation for a list of all supported character
# sets, and available fonts.
# BUGS:
# o Should accept a RHS ratio (e.g., "Helv = Arial.2/3").
#===============================================================
[ Global ] # Put mappings for all surfaces here.
# Mapping from MS Windows
"arial narrow" = "Arial Narrow"
Arial = helvetica
"Courier New" = courier
"Times New Roman" = times
Modern = helvetica
"MS Sans Serif" = helvetica
"MS Serif" = times
"Small Fonts" = helvetica
# Mapping from Macintosh
"New Century Schlbk" = "new century schoolbook"
"New York" = times
geneva = helvetica
#===============================================================
[ Printer ] # Put mappings for all printers here.
#===============================================================
[ Printer:PostScript1 ] # Put mappings for PostScript level 1 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
Roman = palatino
Script = "itc zapf chancery"
FixedSys = courier
System = helvetica
# Mapping from Macintosh
"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
fixed = courier
clean = times
lucidatypewriter = courier
lucidabright = times
#===============================================================
[ Printer:PostScript2 ] # Put mappings for PostScript level 2 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
Roman = palatino
Script = "itc zapf chancery"
FixedSys = courier
System = helvetica
# Mapping from Macintosh
"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
fixed = courier
clean = times
lucidatypewriter = courier
lucidabright = times
#===============================================================
[ Printer:PCL5 ] # Put mappings for PCL 5 printers here.
helvetica = univers
times = "cg times"
clean = "antique olv"
fixed = courier
lucida = univers
lucidabright = "cg times"
lucidatypewriter = courier
"new century schoolbook" = univers
terminal = "line printer"
#===============================================================
[ Display ] # Put mappings for all display surfaces here.
#===============================================================
[ Display:Motif ] # Put mappings for Motif displays here
# Fix for bug no 778937 DO NOT MOVE!
Roman.....sjis = lucida.....jeuc
Script.....sjis = lucidabright.....jeuc
FixedSys.....sjis = fixed.....jeuc
System.....sjis = lucida.....jeuc
.....sjis = .....jeuc
# Mapping from MS Windows
Roman = lucida
Script = lucidabright
FixedSys = fixed
System = lucida
# Mapping from Macintosh
"Avant Garde" = helvetica
"Bookman" = times
#===============================================================
[ Display:CM ] # Put mappings for all CM displays here.
# These are DEC-specific, and may need localization
*..Blink = Blinking
*..Inverted+Underline.Bold = ReverseBoldUnderline
*..Inverted+Underline. = UnderlineReverse
*..Underline.Bold = UnderlineBold
*..Inverted.Bold = ReverseBold
*...Bold = Bold
*..Underline = Underline
*..Inverted = Reverse
* = Plain # The font of last resort
# Oracle Report PDF sections
# Three new sections have been added:
# [ PDF ] - Used for font aliasing and Multibyte language support
# [ PDF:Embed ] - Used for Type 1 font embedding
# [ PDF:Subset ] - Used for True Type Font subsetting
[ PDF ]
"helvetica narrow" = "Arial Narrow"
# This example shows how to rename helvetica font to Courier font
# helvetica = Courier
# You can Alias specific styles of font as below
# helvetica.12..Bold.. = Courier.14....
# "Lucida Bright".12..Bold = "New Century Schoolbook"
# Support for Far Eastern Languages:
# PDF section can be additionally used to enable Multibyte language support
# built into Reports. To use this feature with Adobe (r) Acrobat (c), you
# need to install the Asian font pack available online at the Adobe web site.
# .....SJIS = "HeiseiKakuGo-W5-Acro"
# A Japanese report run with Shift-JIS character set is replaced to
# HeiseiKakuGo-W5-Acro CID font.
[ PDF:Embed ]
# This example shows how to embed Type 1 helvetica font into the PDF file:
# helvetica = "helvetica.afm helvetica.pfa"
# You need to specify the .afm file before the .pfa file.
# The font files must exist in one of the folders specified in REPORTS_PATH.
[ PDF:Subset ]
"arial narrow" = "Arialn.ttf"
# This example shows how to subset Arial True Type font into the PDF file:
# helvetica = "Arial.ttf"
# The True Type font files must exist in any one of the folders specified in
# REPORTS_PATH.
# Subsetting TrueType Collection fonts:
# Typically, a TTC font contains several fonts in one file. For example,
# the TTC file, msgothic.ttc consists of three fonts in the order -
# MS Gothic, MS PGothic and MS UI Gothic. To subset MS PGothic, the
# entry in the PDF:Subset section of uifont.ali would be:
# "MS PGothic" = "msgothic.ttc,1"
# NOTES ON PRECEDENCE OF PDF SECTIONS:
# If you have entries for a same font in many PDF sections, then Font
# Aliasing entry will take precedence over Font Subsetting entry. Entries
# in Font Subsetting will take precedence over the entries in Font Embedding
# section.
# Generic entries for a font must follow more specific entries for the same
# font. For instance, if you want to subset helvetica Plain, helvetica Bold,
# helvetica Italic and helvetica Bold-Italic fonts, your entries must be:
# [ PDF:Subset ]
# helvetica..Italic.Bold.. = "Arialbi.ttf"
# helvetica...Bold.. = "Arialb.ttf"
# helvetica..Italic... = "Ariali.ttf"
# helvetica..... = "Arial.ttf"
# If helvetica..... entry appears in the top of the list, all the styles of
# helvetica font in the layout will be subset as helvetica Plain font.
Thanks,
Rafikul

Welcome to OTN
Check the two link..
1. Re: Oracle Reports 10g Fonts issue
2. Re: Adding new font to my Reports Setup
Hope this will help you
Hamid
If someone's response is helpful or correct, please mark it accordingly.

Change font size in reports

Hi friends,
I want to change the font size in reports.
i want example program for that.

Hi,
You can create workbook. Change the font size of the displayed result and save it. So every time you open the workbook and refresh the query output, the result will be displayed in the changed font size.
Regards,
Dinesh D

Change font color in reports depending on condition

I have an application that generates a number of new records at
the click of a button, which the user can then modify through
several report-form links. My users have requested that the data
appear in one color in the reports if they have not yet updated
the records, and that they change color, permanently, when
updated. I'm not sure how to accomplish this. I do well with
PLSQL, but I think this is probably a Javascript issue(?) - or
is it possible to specify font color of a report when you call a
URL?
Any ideas anyone?

Thank you, both Michaels. I was excited. I was sure this would
work, so I added the updated_by fields to all my reports (they
should be useful anyway). I worked on a couple of other issues
related to this, and returnred this morning to add the HTML font
tags to my report queries. I CAN'T MAKE IT WORK! I've attached
my code, and error message. Any thoughts on what I'm doing
wrong? Thanks.
(Note: The query works fine without the HTML tags.)
My code:
select '<font color=red>'||activity.act_text||'</font>' act_text,
from Activity, survey, temp
where activity.survey_id = survey.survey_id and
survey.survey_id = temp.survey
Error message:
Unable to describe SQL statement. Please correct it (WWV-13010)
Invalid SQL statement: SELECT '<FONT
COLOR=RED>'||ACTIVITY.ACT_TEXT||'</FONT>' ACT_TEXT, FROM
ACTIVITY, SURVEY, TEMP WHERE ACTIVITY.SURVEY_ID =
SURVEY.SURVEY_ID AND SURVEY.SURVEY_ID = TEMP.SURVEY (WWV-13005)
ORA-01001: invalid cursor (WWV-11230)
ORA-00936: missing expression (WWV-11230)
Failed to parse as MCHBGA - SELECT '<FONT
COLOR=RED>'||ACTIVITY.ACT_TEXT||'</FONT>' ACT_TEXT, FROM
ACTIVITY, SURVEY, TEMP WHERE ACTIVITY.SURVEY_ID =
SURVEY.SURVEY_ID AND SURVEY.SURVEY_ID = TEMP.SURVEY (WWV-08300)
I appreciate your help. I'm tearing my hair out.
Karli

Change font color in Report Code causes font size to change.

I am trying to dynamically change the font color in a report, red for negative, green for positive and blue for 0. I have created a report region and here is my code:
select city_name,
py_re_taxable,cy_re_taxable,
decode(sign(re_chg),-1,'<font color="red">'||re_chg||'</font>',
0,'<font color="blue">'||re_chg||'</font>',
1,'<font color="green">'||re_chg||'</font>','') RE_CHG
from rc_dashboard_recap a, lk_city_code b
where b.tax_year = :CURRENT_TAX_YEAR
and a.city_code = b.city_code
and userid = :GLOBAL_USER
order by 1
This code works great except it overrides my css text size and shows up as a page default size. I can't seem to figure out why this happens. This also happens when I try to sum a column. I've set my font size to 11 in my css and it is calling it correctly, however with the above code, my font size shows up at 12 or so.
I am looking at the code (view source from my page and it shows the correct class
<td class="t3dataalta" align="right" ><font color="red">-13.98</font>
in my css:
td.t3dataalta{font-size:11px;padding:2px;padding-left:5px;padding-right:5px;}
If I remove the decode statements with the font color then my font size is correct, but I need to figure out how to make the colors work.
Does anyone have any ideas?
Thank You

select city_name,
py_re_taxable,cy_re_taxable,
decode(sign(re_chg),-1,'font color="red"'||re_chg||'/font',
0,'font color="blue"'||re_chg||'/font',
1,'font color="green"'||re_chg||'/font','') RE_CHG
from rc_dashboard_recap a, lk_city_code b
where b.tax_year = :CURRENT_TAX_YEAR
and a.city_code = b.city_code
and userid = :GLOBAL_USER
order by 1
Here is my query, I removed the < and > signs in the code so that you could see what I have done.

Help regarding classical report

i want help reltated to classical report..
1 . i want to bold text for some lines ..how can i do it...plz tell me..
2 . when i m printing classical report then in the printed page it show date and description of program but i want to hide it. plz help me .
i m new in abap . thanks in advance..

Hi,
Changing font size in reports refer program DD_STYLE_TABLE.
use NO STANDARD PAGE HEADING to hide description of program.
Regards,
Anil

Classical Report Output...

Hi Experts,
                 I have made one classical report whose output is coming upto 4-5 pages depending on user input. But when we will take the printout of this, user want that print to be on only single A4 size paper...Please guide me..
                 Thanks in advance...
Best Regards,
Vinayak

Hi,
    Please go through the below link or else search for Classical report with multiple pages output.
[http://www.scribd.com/doc/7366175/02-ABAP-Book-Intelli-Reports]
[Change of Normal Classical Report to ALV Report;
Regards,
Vijaya Lakshmi.T

In SAP 4.6c In classical reports output how to change Font size and Font type

Dear Experts,
In SAP 4.6c, in classical and interactive reports output how to change font size and font type.
Regards,
Zaker.

These are HTML formatting questions. Nothing to do with the Oracle SQL and PL/SQL languages.
With old-style HTML, the font size and family are set using the font tag.
With modern style HTML, that is done using cascading style sheets (CSS).
Your favourite search engine will turn up tons of information on both.

Going back to same row after saving changes in classic report

dear all,
I have a long classic report .User is able to update different rows of this report using MR update process.Now user is asking for easier flow.What he wants is to be able to go back to same row after he saves the changes.How is it possible to do so
Thank you so much,
Zahra

Hi,
I have one sample
https://apex.oracle.com/pls/apex/f?p=40323:40
When you change Active column select list, page is submitted. After submit JavaScript scrolls report
See this post about details
HELP TABULAR FORM CURSOR FOCUS
Regards,
Jari

How to update the table when change list item in classic report

hi ,
i worked with apex 4.2 and i create normal classic report with one select list(named loved)Column ,now i want to update table when user change the list with new value ,i can't create dynamic action to do this,i create check box with primary key and loop for check item to update the table but i can't get the value of list item. and for more speed the user want to do this when change the list value.
my question
1- how to do this by javascript and get the value from list item and update the table with new value
2- is i must use API to create list item so i can get the value of item in report or what.
Thanks
Ahmed

I coded the following to give you direction:
1. In the "Element Attributes" section of the DEPTNO column, I call a javascript function as:
onchange = "javascript:updateTable(this);"2. I wrote a simple javascript function that shows an alert when the user changes the select list as:
<script language="JavaScript" type="text/javascript">
function updateTable(pThis)
var vRow = pThis.id.substr(pThis.id.indexOf('_')+1);
alert('Row# - '+ vRow + ' has the value - ' + pThis.value);
</script>Now, you can call a AJAX on-demand process inside the javascript function to update the database value.

How to Get checkbox value when List value changed in classic report

hi ,
i worked with apex 4.2 and i create normal classic report with one checkbox column and one column change it to select list(named loved) now i want when user change list
take value of checkbox item and show it in message .
SQL for report
SELECT
'<INPUT TYPE="checkbox" NAME="f01" VALUE="'
||SEQ
||'">' SEQ,
ID,
DEPT_NO,
EMP_NAME} i change the column attributes of Dept_NO to Display as Select list of department name (named lov).
now i want when user change name of department the value of SEQ SHOW IN ALERT MESSAGE
i create JavaScript on the page
function test(pThis) {
var f01_value = $('select[name="f01"]').value;
alert('#SEQ : '+ f01_value);
</script>
I call this javascript function when list change but the value undefined..
My Question :
How can get this value Or any value of item in reports
regards
Ahmed

Hi Ahmed,
>
i worked with apex 4.2 and i create normal classic report with one checkbox column and one column change it to select list(named loved) now i want when user change list
take value of checkbox item and show it in message .
SQL for report
SELECT
'<INPUT TYPE="checkbox" NAME="f01" VALUE="'
||SEQ
||'">' SEQ,
ID,
DEPT_NO,
EMP_NAME} i change the column attributes of Dept_NO to Display as Select list of department name (named lov).
>
You should not create checkboxes like this. Either use the APEX_ITEM.CHECKBOX2 API or change the Column Type to Simple Checkbox.
>
now i want when user change name of department the value of SEQ SHOW IN ALERT MESSAGE
i create JavaScript on the page
function test(pThis) {
var f01_value = $('select[name="f01"]').value;
alert('#SEQ : '+ f01_value);
</script>
>
name="f01" returns an array, what you need is single element value.
Try
<script type="text/javascript>
function test(pThis) {
var f01_value = $v(pThis);
alert('#SEQ : '+ f01_value);
</script>
{code}
{quote}
I call this javascript function when list change but the value undefined..
My Question :
How can get this value Or any value of item in reports
{quote}
Depends in how you are invoking/triggering the change event. Are you using DA or have you written an "onchange" event on the element?
Cheers,

Change font size in Z-Report created from template

A Z-report is being created from template which uses WWI.INI file integration to generate the report in Microsoft Word. In that report the text from phrases is passing over the specified text box. So all the phrases are not displayed.
Now user either want the size of font to decrease or change the size of the box.
We are going ahead with changing the font size. To do so we are editing the template in CG42. Is this approach is correct or we can change the font size from somewhere else??. If yes ,then how to proceed ??
Your help will be greatly appreciated as I am new to EHS and have very limited knowledge.

Hello Aasim,
Just try it out
If you are afraid to destroy something on the WWI template create a copy of the template and do your testing there....
Read the SAP help on WWI.
Can I edit font in the Microsoft Word file which is generated after I click "Document (F7)" button??
Yes you can.
If yes , then suppose I change the font size in a text box there.Does the font of phrase's text also changes accordingly when the report is generated.
Yes.
And does that change is for all the phrases in that text box ( since no. of phrases varies according to the specification)???
Yes it will change the font size for all phrases in that text box.
There is an option in WWI where you can change the text size dynamically if the text is in a real text box.
However I'm currently not sure if this works for all kind of WWI templates or only for labels.
Hope this helps
Mark

Changing font in classical report

Similar Messages

Maybe you are looking for