Process Chain (Urgent)

HI Gurus,
HI have a process chain called production daily process in these process chain we have 2 local chains.this process chain is not triggering from 2 days .and im selecting first local chain to correct manually its showing some dump problem and if i open info package also its is showing the same problem plz give solution for this.
IT IS SHOWING LIKE DES
ERROR:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          05.09.2007 17:01:00
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
     administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
Short text of error message:
Scheduler
Long text of error message:
Technical information about the message:
   Message class....... "RSM1"
   Number.............. 000
   Variable 1.......... " "
   Variable 2.......... " "
   Variable 3.......... " "
   Variable 4.......... " "
ow to correct the error
   Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
   find an interim solution in an SAP Note.
   If you have access to SAP Notes, carry out a search with the following
   keywords:
"MESSAGE_TYPE_X" " "
   "SAPLRSSM_LOAD" or "LRSSM_LOADU07"
   "RSSM_RSREQDONE_READ"
If you cannot solve the problem yourself and want to send an error
   notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
   (Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
      Restrict the time interval to 10 minutes before and five minutes
   after the short dump. Then choose "System->List->Save->Local File
   (Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
   program: The source code of the program
      In the editor, choose "Utilities->More
   Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
   actions and input led to the error.
ystem environment
   SAP-Release 700
Application server... "biprdn"
   Network address...... "10.20.0.8"
   Operating system..... "AIX"
   Release.............. "5.3"
   Hardware type........ "00C6DDDD4C00"
   Character length.... 8 Bits
   Pointer length....... 64 Bits
     Work process number.. 1
    Shortdump setting.... "full"
Database server... "biprdn"
    Database type..... "ORACLE"
    Database name..... "BWP"
    Database user ID.. "SAPR3"
Char.set.... "en_US.ISO8859-1"
SAP kernel....... 700
    created (date)... "Jan 28 2007 20:40:17"
    create on........ "AIX 2 5 005DD9CD4C00"
    Database version. "OCI_102 (10.2.0.2.0) "
Patch level. 95
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
    SAP database version. 700
    Operating system..... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory consumption
    Roll.... 16128
EM...... 12569760
    Heap.... 0
Page.... 65536
MM Used. 4316536
    MM Free. 4060576
User and Transaction
Client.............. 200
    User................ "SISLBW"
    Language key........ "E"
    Transaction......... "RSPC "
    Transactions ID..... " "
Program............. "SAPLRSSM_LOAD"
    Screen.............. "SAPLRSPC_FRONTEND 0300"
    Screen line......... 0
Information on where terminated
    Termination occurred in the ABAP program "SAPLRSSM_LOAD" - in
     "RSSM_RSREQDONE_READ".
    The main program was "RSPC_MAINTAIN ".
In the source code you have the termination point in line 41
    of the (Include) program "LRSSM_LOADU07".

Hi Prashanth,
Please look at SAP Note: 962365
Hope it helps you.
Cheers!
Amit

Similar Messages

Issue in process chain (urgent)

Hi guru's,
i used customized abap program process type which was already created by somebody.
i linked this process type to 2 process types based on the success and failure.
on success of this process type it connects to another program process type , here there is no problem.
if it is success.
on failure i connected to attribute change run,
but it is not continuing , it is stucking there.
when i check in log view it is giving a msg " status of program xxxx is changed , do you want save the changes ?"
if i press "yes" chain is continuing.
but we dont want this , as this chain is scheduled in mid night
user cannot interact to this msg.
we want process chain run even if it is failed to next step without any user interaction. please help
pramod

Hi Pramod,
It seems to be there is problem with links.
Remove the links and relink the process steps.
Now activate and schedule the process chain.
I have experienced the similar problem in past.
Hope this helps.
-Subhashini

Error in Process chain( Urgent Please )

error in Process chains:
My Process Chain errors out in the step to activate the ODS after loading data inot it.
The loading is correct and green. The Activation step errors out .
Can u please explaing me the error messgae what it means & how to overcome the error & correct it ?
I get message like this :
Req. REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status 2 in rsodsactreq missing in return
Message no. RSMPC129
Diagnosis
Request REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status &3 in table 'RSODSACTREQ' is passed to the return structure as correct.
System response
The return structure is corrected and the data package is marked as incorrect.
Message was edited by:
Chris Gokul

Chris,
Looks like a request has not got deleted properly from the table :
Options that you could look at :
1. Delete all the data from the ODS and load again ( if that is an option )
2. There are some entries you need to delete from the RSODSACTREQ table- but for this the suggestion would be to raise an OSS note for SAP to look into the same - we had a similar issue and raised an OSS note for the same and then got some notes from sap.
Also please mention your BI version and patch level.
Arun

Process Chains (Urgent)

Hi,
Can any one pls tell me how to create process chains,as i am new to process chains.
Pls give me the steps how to design the process chains.
Thanks in Advance.

hi,
try
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using process chains in sap business information warehouse
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9

Cancel the scheduled jobs for process chains - urgent

Hi,
How do I cancel the scheduled jobs for process chains which are going to run tonight.
thanks,
Radha

Hello,
Go into transaction code RSPC and then select the particular process chain by going into the edit mode and in the menu...
Look for Execution --> Remove from Schedule.
Let me know if that answered your question.
Thanks
Dharma.

Node for Process chain--Urgent

Hai All,
I am having a group of process chains and i want place in a single node or a folder.
How to create that node or folder.
Thanks in Advance.
Regards.
Vikram Singh

Hey i tell you very simple way by which i do always....
1.When you create a process chain usually it goes to nonassigned folder
2.To assign a folderdouble click and open your process chain which is under not assigned folder
3.Click on pencil icon in top menu bar for modifying it
4.Press CTRL+F11(for display components).
5.A popup will come Assign Display grouping-Press F4
6.You will find different folders thereeither select any of the existing folder where you want to put that process chain or-
Press F5--to create a new folder
Enter Application Component(folder name) and its long text--and press enter(or green tick)
7.Select that Application component-->green tick (enter ) -->save(ctrl+s)
8. Press Refresh button on left side...
and you are done....
Assign points if helpful..
Regards,
Rocks

Process Chain: Urgent help needed!!!

Hi Guru's,
I need to change the process chain:
We are currently loading the data form 000000 to 100000 in a single process but now the customer asked us to change it to 4 packages:
000000 to 250000, 250001 to 500000, etc..
Could any one help me in this pls???
your help much appreciated.
regards,
BH

Hi Varma,
    I am assuming you are using generic extractor using function module.
Create a z-control table which maintains ranges 250K records. In future use can even change the range if you want .
below is piece of code from function module
Auxiliary Selection criteria structure
data: l_s_select type srsc_s_select.
data : l_lines type i.
Maximum number of lines for DB table
statics: s_s_if type srsc_s_if_simple,
counter
          s_counter_datapakid like sy-tabix,
          counter type i.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
if i_initflag = sbiwa_c_flag_on.
Check DataSource validity
    case i_dsource.
      when <check your datasource name>
       when others.
        if 1 = 2. message e009(r3). endif.
        log_write 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  i_dsource            "message variable 1
                  ' '.                 "message variable 2
        raise error_passed_to_mess_handler.
    endcase.
    append lines of i_t_select to s_s_if-t_select.
Fill parameter buffer for data extraction calls
    s_s_if-requnr    = i_requnr.
    s_s_if-dsource   = i_dsource.
    s_s_if-maxsize   = i_maxsize.
else.
    if s_counter_datapakid = 0.
read z-table to know the size i.e. 250K
first read
       z-ctr_frm = 0.
       z_ctr_frm = z_ctr_frm + 250000.
endif.
     if z-ctr_frm > 0.
       z_ctr_frm = z-ctr_frm + 250000.
       z_ctr_to   = z_ctr_frm + 250000.
    endif.
***Generate data packets
    select data from table with the number range variables z_ctr-frm and z_ctr_to.
    s_counter_datapakid = s_counter_datapakid + 1.
endif.
ENDFUNCTION.
I hope this help you.
Rgds,
Se Vu

Plz help in process chains- urgent

Hi ,
Process chain failedat load IP. i want to rerun this PC . so i went to RSPC , activated and scheduled the chain , but when i went into log view , nothing i can see , but a message , no logs were found and in SM37 , i can see a job with BI_PROCESS_TRIGGER released ..
what might happend and how to resolve this?
pavan

Check the start variant of the process chain...
Does it say DIRECT SCHEDULING and START IMMEDIATELY ??
Good luck!

Creating process chains

Hi guys,
I need a step-by-step guide on how to create process chains urgently, could you please walk me through the process of what to click on to begin with e.t.c.
Thanks in advance

Hi Gurbinder,
First of all you need to Identify the InfoObjects if you want to take up Master Data Loads, and if you want take up transaction loads then select the Data Targets to which the data has to be updated. Then plan the dataflow accordingly.
You want to create a Process Chain, Go to RSPC, and then select the create option and from the Process categories available on the left handside drag and drop the Start process, then define the Variant for the same. In the same way you need to identify the other Process Types available on the lefthand side. For Eg: Start Process>Load to ODS>Activation of ODS Data>Delete Indexes for the InfoCube>Load to InfoCube>Create Indexes>Delete Overlapping Req-->Agg. Rollup.
This is how you need to specify the dataflow, several other Process Types also included based on the requirement For Eg: Sending Mail Alerts when the Job is Success or Terminated.
Hope this will Help you..
Regards,
Madhu

Process chain problem...., its urgent

Hi all
in my process chain we are loading 4 loads into ODS. After 3 loads, 4th load didn't take place. its not yet started even 3rd one successfully ran. its not showing error also. what can i do. after 4th one ODS activation process is there.
Please advice me. will i go for manual loading. if i do manual, what abt activation after 4th load. will i do activation also manual or else it will trigger automatically as part of process chain........../
Advice me frnds..., its urgent
Regards
swetha

Hi Swetha,
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
Of course you can also set the state of a specific step in the chain to any other possible value like 'R' = ended with errors, 'F' = finished, 'X' = cancelled ....
Check out the value help on field rspcprocesslog-state in transaction se16 for the possible values.
Try this solution with your 3rd ODS..hope this will solve your problem for this instance. This is just a workaround.
Before next scheduel of the process chain..remove the link between 3rd ODS and 4th ODS and then reconnect once again and activate the process chain and schedule it as per your schedule cycle. From next upload onwards everything works fine.
Assign points if it is helpful.
Regards,
Sreedhar

URGENT:Process Chains And events Related

Hi All,
I have created a new process chain which is a normal ODS Process Chain.For that I started with the start Process and then created event in sm62 to trigger the start of process chain.Similarly,I have at the end of the process chain ,I have added 2 ABAP Programs ,one to mark the successful completion of process chain and another to mark the Error or Unsuccessful completion.For these programs,I maintaines Processvariants and here, we have utility Programs.So used the relevant utility program and created a program variant and Events ,One for successful completion of process chain and another to mark the Error or Unsuccessful completion.
But ,Now ,I find that when I trigger the eventin sm64,I find that the process chain is not being run.Is that any problem with the events I created.This is the first i am involved with creation of events in SM62.Can anyone help me in this regard.
Can anyone,tell me thatdo we need to do anything else apart from Creating events .Imean like assigning jobs and then Programs in the Step of that Job.
Please Kindly help me in this regard.It is very very urgent for me.Thank you.Points will be assigned.
Regards,
Samir

Hi,
I have tried in the same way you have said .I have maintained as after event and activated and scheduled.after that i triggered the event insm64.But still,I am not able to see the Load in RSMO.
I have just checked out in sm37.And found that some jobs have failed.I think this might be the reason for the Process chain to not run.
I am just pasting the error msg and solution.
Job BI_PROCESS_ABAP, waiting for event RSPROCESS 489W6WH6I7OHV7BL3N9909F7F, has no predecessor
Message no. RSPC003
Diagnosis
Although job BI_PROCESS_ABAP has been started by event RSPROCESS 489W6WH6I7OHV7BL3N9909F7F and is recognized in the process chain, the current run for this process has no job preceding it.
This is why the system was unable to determine a log ID, and the chain is broken.
System response
The job has been terminated.
Procedure
With the exception of the start process, each process must have a process that precedes it.
Then Another error for the another cancelled job is
Job BI_PROCESS_OR, waiting for event RSPROCESS 489WC2QYBC4AJSYILQ10TWABF, has no predecessor
Message no. RSPC003
Diagnosis
Although job BI_PROCESS_OR has been started by event RSPROCESS 489WC2QYBC4AJSYILQ10TWABF and is recognized in the process chain, the current run for this process has no job preceding it.
This is why the system was unable to determine a log ID, and the chain is broken.
System response
The job has been terminated.
Procedure
With the exception of the start process, each process must have a process that precedes it.
Please kindly help me if you understand the problem.
Thanks,
Samir

Urgent:changing the Directory of process chains

HI SAP GURUS,
I actually created some process chains in the notassigned nodes ,i want to assign them another directory in which all my other process chains.Can any body help me to sort this.Its very urgent
thanks in advance
Message was edited by:
narendra kumar ragulakollu

hi Narendra,
try RSPC->choose your process chain, go to menu process chain-attributes-display component (shift+F11)-> a small screen 'assign display grouping will come out', choose the 'directory' you want. save the process chain and 'refresh'.
hope this helps.

Urgent : Download file from Application Server via Process Chain.

Hi Experts,
My requirement is to download the file from Application Server to local work station using an ABAP Program .
I want including the above ABAP program in a process chain to execute the program daily,
I tried to use ARCHIVFILE_SERVER_TO_CLIENT and GUI_DOWNLOAD but unfortunately both the above FM doesn't support to run through Process chain.
Can any one of you help me to send the code which selects a file from application server, downloads to local system and deletes it.
Thank you very much for spending your precious time in this regard.

Hi Sailekha,
Regarding your case ..
I suggest you to create the program where it run this function: WS_DOWNLOAD.
After it, the program is run by your process chain.
Hopefully it can help you a lot.
Regards,
Niel.
thanks for the points you choose to assign.

Urgent help regarding process chain error

hi experts ,,
one of the process chain is not running properly for last 5 days ....
now current status of process chain is red ...and msg is last delta isrunning/has errors ..couldnt process request
msg of yester days chain ........
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system
error msg in bd87 (with idoc status 02 )
tried to process idoc manually but it didnt happen ...throughing same error....
one more thing here is same process chain status on 16th is in yellow status .....
its in yellow status at dtp load step ....on right click on dtp_load variant --->in batch montior --->job overview
dtp_laod job was is ready status ....
i thought this status effecting others so tried to schedule the job couldnt ....
so deleted job in confession....
now and process which is bfr dtp_load is in yellow and whole chain is in yellow ....
what shall i do now ??how to correct this ??
shall run dtp manually and dso activation manually ???and shall i make process into green status ???
or shall retrive deleted job wit basis ppl help???
please help me...
whoever helps me to fix this issue will rewarded wit full points and i will be greatful to them ...
Regars, \
Harry...

Yes, as rightly said you need to run the previous delta before updating new records in the latest request. If possible de-schedule the chains for a while, delete the old deltas (assuming you are using flexible updates?) and try to repeat the loads manually & proceed to activate & schedule once the delta has finished processing. If you still think this is an issue related to idocs processing, you can do the re-processing, provided they do not create fresh batch of idocs in the source system. You can re-process the idocs both inbound & out bound using reports like RBDAGAIN (But again, use extreme caution on these!). Please refer the #scn wiki on http://goo.gl/njVLS for more information on the idocs. For reprocessing please check this http://goo.gl/8aAcz. Thanks.

Process chain error - urgent

Hi
we have a process chain based on Funda management.
we have the chain like start > load data(0PU_IS_PS_44 delta 0PU_IS_PS_42 delta>active data store data active data store data>AND>further processing further processing
Here on 10th 0PU_IS_PS_42 delta is displaying yellow.
and on 11th and 12th it is clear(i.e. every thing is greeen)
we are loading data from dso to cube.
when we check the data in cube on 10th it is not displaying data though the data mart symbol in dso mangae is displaying.
my doubt is how to make the request from yellow to green,and how to get the data of 10th date in to the cube.
I made the request red and repeat the process
but it is not done
please help me in this regard
Boss can any one who can help me pls
thanks in advance
sridath
Edited by: sridath on May 12, 2008 10:09 AM

Hi,
If you want to load the 10th data then you can do a selective load for that date. You have to go to your Infopackage/DTP in the Calday or any Date characteristic put a filter for 10th as date and load the data
Hope this solve Ur issue.
Rgs,
I.R.K

Process Chain (Urgent)

Similar Messages

Maybe you are looking for