Changing of sapum.properties problem

Hello,
I was manually changing content of sapum.properties.bak file - after that I naturally cut the .bak suffix to take effect after restart. More precisely, I changed:
- ume.logon.security_policy.password_change_allowed to FALSE
- ume.logon.security_policy.password_min_length to 0
But when I'm log in portal, I got an exception: "Unknown message (ID = Authentication error: credentials could not be verified.com.sap.security.api.AuthenticationFailedException: SAPSTAR_ACTIVATED)".
I take changes back:
- ume.logon.security_policy.password_change_allowed=TRUE
- ume.logon.security_policy.password_min_length=6
.. but exception still remains..
Could anybody help me?
Thanks and regards,
Pepa

Log in with the following default user. It should work :
Login : SAP*
Password : 06071992
Next go to System Administration > User Management. Then configure the panels according to your needs. To disable SAP*, uncheck the corresponding box in the first panel and enter a valid user name that will become the new portal super admin.

Similar Messages

Can't Save Sapum.properties

When trying to save our LDAP configuration settings in the portal I get the following message:
Hi, we are running EP6 SP2
Can't Save sapum.properties .
I setup the LDAP and test connection and I get connection successfull but when I click on the save button I get the following message:
"Can't Save sapum.properties ."
I tried re-activating SAP* (renaming the sapum.properties.bak file)and make the changes and I get the same message "can't save sapum.properties".
I appreicate any help and information on resolving this problem.
Thanks,
Jay

Hi,
I have check the permissions and I have full rights to the file. I can pull up the sapum.properties file and manually make changes to the file and save it, however, when I restart the engine I still get the same error when trying to make changes to the LDAP configuration options. The manual changes i saved for the LDAP settings were not there. I made sure that I was manually updating the correct sapum.properties file as well.
My OS is Windows 2000 server.
I appreciate all your help.
Jay

Sapum.properties for 'database' datasource

We are trying to use UME APIs from UMFactory class. We are able to connect using sapum.properties file but it requires to maintain ume.db.jdbc. parameters. These parameters are defined explicitly in clear text which creates security problem.
The question is whether there is any place in Portal where DB connection parameters can be maintained and can be used by UME APIs?
Version is EP6SP13.
Thanks,

Hi Dagfinn,
Trying to call UME APIs from Standalone Application where UMFactory Has to be initialized but i get this error.
An error occurred while initializing UME for standalone scenario.
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.security.api.UMFactory.initialize(UMFactory.java:472)
     at com.npower.webservice.WebServiceTest.createUser(WebServiceTest.java:76)
     at com.npower.webservice.WebServiceTest.createNewUser(WebServiceTest.java:44)
     at com.npower.webservice.WebServiceTest.main(WebServiceTest.java:33)
Caused by: java.lang.NullPointerException: The configuration path is null!
I am trying to get configuration path as follows
String umeCfgPath = System.getProperty("ume.cfg.path");
I am using Netweaver 7.0 & found all help about confuguring UME Configuration Data but coudnt find existence of sapum.properties & ume.cfg.path .
I think for a standalone application path has to be loaded in Class Loader using sapum.properties & ume.cfg.path , can you help me in finding the location in Config tool or Visual Admin or File system of WAS & how to use them for my Application ?
Thanks in Advance !!!!
Ravi

The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

My hp failed to start it says, A recent hardware or software change may be the problem.

my hp failed to start it says A recent hardware or software change may be the problem. It gives the option of Launch start up repair or Start windows normally, it freezes after clicking any option. What can i do?
My pc is a Compaq Presario CQ62-216DX Notebook. It also says on the screen, Description: fix problems that are preventing windows from starting.

Hi,
Shut down the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Changing the field properties (editabel/greyed out) dynamically?

Hello
I am developing an Adobe interactive form. My requirement is dynamically changing the filed properties based on the other field values/selections/inputs.
1) For example in the form, if user puts value_A in field_1, then, the field_2 should be greyed out.
2) If user puts value_B in field_3, then, system automatically populate the value_C in field_4 in order to let the user make easy- user friendly
3) If user puts value_D in field_5, then, only allowed value in field_6 is value_E, if by mistake user puts value_F in field_6, then, system should throw error message
Pls. let me know how to achive this DYNAMIC functionality in the FORM or do we need to handle from WEbDynPro ABAP side?
Thank you

Hi,
Everything you have mentioned is possible in the form itself. Just write the valid script at valid event of valid field.
1) For example in the form, if user puts value_A in field_1, then, the field_2 should be greyed out.
Ans: Write on change event of Field1:
if($.rawValue eq "value_A")
then
Field2.access = "readOnly"
Field2.fillColor = "192,192,192"
endif
2) If user puts value_B in field_3, then, system automatically populate the value_C in field_4 in order to let the user make easy- user friendly
Ans: Write on change event of Field3:
if($.rawValue eq "value_B")
then
Field4.rawValue = "value_C"
endif
3) If user puts value_D in field_5, then, only allowed value in field_6 is value_E, if by mistake user puts value_F in field_6, then, system should throw error message
Ans: Write at exit event of Field6:
if(Field5.rawValue eq "value_D" and $.rawValue ne "value_E")
then
xfa.host.messageBox("Wrong Value", "Error", 0)
endif
For such type of scripts you can refer to designer help also. So please check there before posting your query that would save your time.
Regards,
Vaibhav

Can't seem to change the Document Properties Advanced Reading Options in a Form that was created in Adobe LiveCycle. This option has been "greyed" out - anyone know how to update this to English so I can pass Accessibility Testing?

Can't seem to change the Document Properties > Advanced > Reading Options in a Form that was created in Adobe LiveCycle. This option has been "greyed" out - anyone know how to update this to English so I can pass Accessibility Testing?

LiveCycle forms use a very different approach to create a PDF form than Acrobat and that approach makes many features for processing PDFs non-functional.
You might want to ask this question in one of the LiveCycle product forums.

How do I change the default properties for Replace(Ins)?

Acrobat Pro X
Comment tools: Annotations
All tool icons EXCEPT Replace(Ins) show "Tool Default Properties" as an option when right-clicked. When I right-click a particular replacement in the document and select "Properties," there is no option to set current as default.
So, how do I change the default properties for this annotation tool? I need to change the Author and the color.
Thanks,
Nancy

Create customized controls for your graphs and controls and setup your favorite attributes .
Use your custom controls instead of the canned controls.
Do a search on UI and you will find a community that already created custom controls.
Visualize the Solution
CLA
LabVIEW, LabVIEW FPGA

How to change default text properties and text box properties

I'm adding text to a PDF document by using the text box tool. The default is to put a border around the box and also the font is red and larger than I'd like. I think I found how to change the default box properties (so it has no boarder).
For the text/font, I can pull up a menu to change the font properties, but so far I'm having to do this for each box I create. One workaround is to cut and paste new text boxes with the formatting I want, but I still want to know how can I set the defaults to the font, size and color of text I want?
I'm using AA 8 Professional
Best, David

This is one of Acrobat's less intuitive areas!
For defaults, right-click on the text box that is as you want it: then select menu item 'Make current properties default'
Use Ctrl-E to bring up the Properties toolbar: its content will change depending on whether you have the box or the text selected, and selecting the box or text can be a bit clunky.
Steve.

After updating to newest, firefox the change icon in properties (bookmarks) is missing, can I get it again somehow? Since I like to make my own icons in bookmark toolbar

I have made a bookmark toolbar with all my fav sites, a lot of sites have not made a icon logo, so I make one,,, By using the change icon in properties (right click on the icon) But this feature is not in the newest firefox update.
How can I get it again? is there a specific extension fx??

Perform the suggestions mentioned in the following articles:
* [[Latest Firefox issues#os=mac&browser=fx9|Icons missing in the Bookmarks menu]]
Or use this extension to restore missing Favicons --> '''CheckPlaces 2.6.1'''
* https://addons.mozilla.org/en-US/firefox/addon/checkplaces/
Check and tell if its working.

Adding an Attribute to a VO changes the custom properties of the existing

Adding an Attribute to a VO changes the custom properties of the existing attributes of the VO.
We had a requirement to add an extra column in the VO.
We modified the underlying EO to include the new column from the table, and modified the VO as well.
Jdeveloper was changing the custom properties of the existing attributes in the VO. Our fix was not working as expected.
Could anyone please inform us:
1. On what logic does Jdeveloper determine to modify the existing custom properties of other VO attributes.
2. Can this behavior of Jdeveloper be controlled through any mechanism.
Thanks in advance,
Rahul.

Hi,
which version of JDeveloper and how to reproduce ?
Frank

Changing the Custom Properties of Custom Webpart in Sharepoint 2013.

Am working on a requirement , where i need to create a quick poll , for that i am using some Third party webpart,
http://www.amrein.com/apps/page.asp?Q=5755 , this is the link of that Polling webpart , where the source code is not available.
Question : where by default we have to open the edit properties of that webpart in UI and then can configure those properties. But am facing a requirement like there should be UI with textboxes ,like in a form view in a page itself , and
after if we could enter those details, guess there is a button in a name " create a poll" ,
So in a click event , i could add this third party webpart to the page and now i need to change the custom properties based on the values we enter in the textboxes , how i can access the custom properties after if i got the instance of the that third
party webpart in a page using splimitedwebpart manager programmatically....??
Any One can guess this scenario...??

Hi,
If you use Third party web part, I suggest you contact the author of this web part to extend some custom requirements.
From your description, my understanding is that you want to create a quick poll.
Here are two solutions from codeplex with the source code for your reference. You can refer to the source code and customize your own solution base on your requirement.
Opinion Poll SharePoint 2010 Web Part
https://opinionpoll.codeplex.com/
SPUserPoll - SharePoint Poll Web Part
https://spuserpoll.codeplex.com/releases/view/104374
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Editing User Management Properties (sapum.properties)

Hi all,
Can some one tell me how to edit the sapum.properties file??
This is very urgent.
Thanks,
Narahari

Hi Narahari,
System Administration - System Configuration - UM Configuration [- Direct Editing]
Also see http://help.sap.com/saphelp_ep60sp2/helpdata/en/07/9bda3d5ed05610e10000000a114084/frameset.htm and http://help.sap.com/saphelp_ep60sp2/helpdata/en/d1/956f8b86b2a949913ed22d253e0012/frameset.htm
Hope it helps
Detlev
PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance!

If we change cube specific properties does we need to delete data in Prod

Hi All,
We have changed cube specific properties like display of InfoObject in dev. to transport to prod does we need to delete data from cube or not required . Please help.
I am assuming that data deletion not needed as we haven't changed the structure of cube. please advise us.
Regards,
Chandra

the only reason for which data is to be deleted from a cube before an import of changes, is if a Infoobject is removed from the cube (for any reason). so in your case, no need to delete data. Anyway this is a trial and error case. leave the data and import. if the import dumps, then you have a big chance that you need to delete the data. do this and import again.
but, i don't think it's necessary in this case.

Change Mouse Default Properties

How can I change mouse default properties in software simulation projects?

Hello,
I don't know of a way to do this before capture, because the mouse has no object style in the Object Style Manager, and is not included in the Modes settings for capture. However changing the properties when editing can be done rather quickly:
Select one Mouse object, use Options accordion to change its properties
Use the small curved arrow button top right of that accordion, to apply the changed properties to all mouse objects.
Didn't check it out if it could be saved in a template... but then you'd have to use that template for each project. Please, could you also mention the version you are using when posting a question? For this question it was not that important, if you have a version later than 4.
Lilybiri

Changing of sapum.properties problem

Similar Messages

Maybe you are looking for