Changing project types

Hi,
When building a new Flex project, in the wizard you can
specify the project type.
I was wondering, is it possible to change this in the same
project afterwards?
Thanks

I don't think you can change the project type. You can modify
other setting by going to the project properties.
As a work around - you can delete the project (don't delete
the sources) . And recreate the project with different type using
the existing sources.
Thanks,
Gaurav

Similar Messages

Project Type Update more than 1 project at a time

Hi All,
Is there a possibility to change project type of more than 1 or should I say in bulk update project types for existing Projects in Project Center??
Regards, Syed Faizan ur Rehman, CBPM®,PRINCE2®, MCTS

Hi Syed,
Yes it is. Go to the server settings, then change or restart workflow. From this page, you will be able to choose a source EPT and projects then a destination EPT. Note that you can use this feature evenif you don't use workflows.
http://technet.microsoft.com/en-us/library/gg188108(v=office.14).aspx
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

How to change the project type of inprogress project

How to change the project type of in-progress project, The project type is Testing and need to change it to basic project plan.

Another way is to click on the top right button of the project center ribbon, after selecting the project. Note that this way works for one project at a time whereas toon's reply works for bulk edit.
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

Resp Person Tab is not coming in CJ20N for a particular project type

Hi All,
I am unaware of the standard SAP screen in CJ20N but we have a screen in CJ20n wherein we can assign a person / link a person this particular tab is not coming at all for a particular project type (Resp Person) rather a different tab (cust enhancement) is coming but our problem is we have a mass program which works on BDC and hence if the required screens are not there it fails.
Can someone please tell me if there is come config i can check/ maintain for this resp person tab so that it starts coming for all project types.
Regards
Anmol Pareek

Hey Sarang,
Thanks a lot, it was helpful, one more thing though, In Resp Persons tab there is something called Link Employees and my problem is that i have a mass linking program (using BDC) which cannot work if i dont see that screen in my BDC (without changing BDC). The way you have told is in OPUK/ OPUJ check for proj type and see if person responsible is hidden or not. I dont think that is what i am asking because no matter what this person responsible is hidden, but for certain project types Resp Person tab itself is not coming and that is the problem.
Regards
anmol

Is there a way to change the type of hash for passwords in active direcroty?

I would like to know what type of hash used for active directory passwords and if there is a way to change the type of hash.

Hi,
Windows generates and stores user account passwords by using two different password representations, generally known as "hashes." When you set or change the password for a user account to a password that contains fewer than 15 characters, Windows generates
both a LAN Manager hash (LM hash) and a Windows NT hash (NT hash) of the password.
You can configure the type to only store the stronger NT hash of your password.
How to prevent Windows from storing a LAN manager hash of your password in Active Directory and local SAM databases
http://support.microsoft.com/kb/299656/en-us
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Report to get WBS elements based on Project Type

Dear Experts,
Is there any report exists in Project Systems to get WBS elements based on Project Types.
This we can check in the table PRPS-PRART.
But i need to know the availability of T Code.
Thanks in advance.
Regards,
Srinivasareddy Y

Hi,
If its a one time requirement using CN43N might help in meeting the requirement. However, first it has to be executed for a certain range of projects and then the layout will have to be changed accordingly. Instead of doing this if a custom report is developed with the input parameter as "Project Type" it would make it much more easier. You can even have the F4 search option for the input parameter. Doing this will help if the report is going to be used frequently in the future.
Take your call and proceed accordingly.
Regards,
Gokul

Difference in Project Types and Solution Directory

Hi -
We are in the process of deploying solution manager within our organiation. We have a made good progress in designing the end to end processes for an implementation project. I am now looking for guidance on after the project is in production how to make changes - bugs and enhancements. Should this be done directly in the solution directory or a specific project type? We are not using CHaRM. If it is a project type, when should changes be made directly within the solution directory?
Also, what are the difference in the project types - implementation, upgrade, maintenance, safeguarding, template, and upgrade. When should each be used?
Thanks in advance!

Hi Janice,
you have two options to do changes in operations:
Directly in Solution Directory. However, there are some limitation since not all tabs can be changed (e. g. configuration tab is only available in display mode).
Via a maintenance project. This functionality is available since Solution Manager 4.0 FP 1. You have to assign a maintenance project to your solution and activate the check-out/check-in functionality (in the "solution settings"). It will the be possible to check-out objects into the maintenance project and perform your changes in the maintenance project. These changes will become visible in Solution Directory as soon as you check-in the objects. This functionality is currently independent of CHaRM.
An overview of the project types is available in the Solution Manager Application help. Follow the path "Projects--> Project Administration --> Project types".
Best regards,
Michael

Custom Project types

Hi All,
Is there anyway to define a custom project type( like implementation, upgrade...) through configuration or BADI.
and what shud we follow to link it to a number range for the maintenance cycle and link this to a subject which will automatically fetch the maintenace cycle of the custom project type.
kindly give your inputs in this.
Also there is one more doubt,
in enterprise edition we were able to link the change request to business processes.... is there any BADI or EXIT or through configuration we can automatically update the transport request for the changes done corresponding to the business process.
kindly share your inputs
Thanks and Regards,
Subhashini.

I don't think you can filter project types on stock CDT New Project Wizard. But you can create (inherit) your own wizard which filters project types, that would be much easier.
For that, use extension point org.eclipse.ui.newWizards and subclass CDTCommonProjectWizard.
Andrew

Saved and publieshed Projects are not linking to the enterprise project types

Hi
We have 15 enterprise project types, when we create a project we will select that EPT's and create projects.
After create the project -- saving and Publishing -- server settings -- change or restart work flow -- it must show the project under the EPT which we selected but the problem is that it is showing all the projects in None.
We tried to asscoiate the project to the EPT but still it is ssowing up in basic project paln which we are not using.
Can any one had faced this kind of issue please revert..
Thanks for the assistance in advance.
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Usually it means there's a failure in the workflow. A couple things:
1) Check the ULS log.
2) Try creating the projects from a non-SysAdmin account - which typically doesn't have a user profile - which causes workflow to fail.
3) Try creating an EPT with no workflow and see if you get the same results.
Andrew Lavinsky [MVP] Blog: http://azlav.umtblog.com Twitter: @alavinsky

How do you change project settings on Premiere Elements 12?

I have Premiere Elements 12. When I view a DVD I created of wedding photos, the edges of people and objects are jagged and generally the photos appear blurry. On my old Premiere Elements 8, I did not have this problem - the pictures on DVDs were clear and sharp. When checking the project setting on Premiere 8, the project settings for Capture was DV which changed all my settings for General and Rendering project settings. On my new Premiere 12, the Capture setting is HDV and I cannot get the General and Rendering settings to change when I change the Capture setting to DV. The online help from Adobe says to correct this, "In the New Project dialog box, click Change Settings," but when I start a new project in Premiere 12, "Adobe Premiere Element Editor" is the only dialogue box that shows and I cannot see a change setting button. Does anyone know how I can change my project settings so that when I select DV it will change all the presets for the General and Video Rendering settings?

jacquelinebaker
The party line is that you cannot change project settings once the project settings have been set. You need to start a new project.
Edit Menu/Project Settings/General does not offer the opportunity for any significant project settings change in this type of situation.
I have discovered that, under certain circumstances, that the user can change the established project preset without starting a new project.
The approach to doing this involves editing the Notepad document of the saved closed project file (project.prel file). I have written about this in the following blog post.
http://www.atr935.blogspot.com/2013/05/pe11-changing-project-settings-without.html
You need to weigh the pros and cons of going through the procedure or just starting a new project and start the project again.
All of the above being said, on to setting to the correct project preset to match the properties of your source media. Please refer to the issues involved and how to set manually the project preset when the program is not doing the job correctly or best automatically.
http://www.atr935.blogspot.com/2013/04/pe11-accuracy-of-automatic-project.html
To the specifics...if you are doing DV data capture firewire into Premiere Elements 12 Capture Window, the scenario would be...
a. Open Premiere Elements 12 to the Expert workspace, go to File Menu/New/Project and Change Settings. In Change Settings,
change the project preset to NTSC DV Standard or NTSC DV Widescreen depending on NTSC or PAL set up and 4:3 or 16:9 DV data source. Then before you exit that area, make sure to place a check mark next to "Force Selected Project Setting on This Project" in
the new project dialog. Exit that area and return to the Premiere Elements 12 Expert workspace for your Add Media/DV Capture selection.
If you are doing HDV data capture firewire into Premiere Elements 12 Capture Window, then same scenario except the project preset change involves NTSC HDV HDV 1080i30 (if NTSC). In this instance, the Edit Menu/Project Settings/General should look like
Please review and consider and then let me know if I have targeted you question or need clarification.
Thank you.
ATR

Can you use html text in flash cc html5 project type?

I'm attempting to dynamically change font color of various words inside a dynamic text field.
I have tried both these lines of code below. have you dont this can you correct my code please?
I'm using flash cc and html5 project type. This was possible in previous versions of flash.
this.Logger.Log_File.htmlText = ""+MyGreatNumber+" "+" "+this.Logger.Log_File.htmlText;
this.Logger.Log_File.htmlText = ""+MyGreatNumber+" "+this.Logger.Log_File.htmlText;

from the easeljs docs: Please note that Text does not support HTML text, and can only display one font style at a time. To use multiple font styles, you will need to create multiple text instances, and position them manually.
to resolve, edit text in the js file where it's relatively easy to even use rtl text.

Change step type

I recently inherited a TestStand project that needs changing. My main question is how to change a step type. For instance,
sequence 1
   step 1 (p/f) that programs 1 field in a device,
   step 2 (p/f) that verifies field 1 in the device.
sequence 2
   other actions
sequence 3
   step 1 (p/f) further programs 8 fields in the device.
   step 2 (p/f) verify the 8 fields.
I would like to save the results of sequence 1, step 2 in a non-station global, then verify all 9 fields in step 2 of sequence 3. So I am guessing I should make sequence 1 step 2 an action vi instead of a p/f step and save the result in a global or maybe I can just uncheck the collection flag.
Hope this makes sense .
Thanks,
jv

I found change step type, please disregard.

Change storage type. Please

Hi Guys,
We are using storage type search
3 storage types are defined for the storage type indicator 001.
In WM we have over 20 different storage types.
The sorage type search works fine, it means that one of the 3
defined storage types is beeing found.
I know that the found storage type is meant as a proposal and that the user can change storage type/section/bin during processing of the transfer order (it means to select another of the restly 17 storage types defined in WM).
From business we got the requirement to avoid limit the change of the storage type and section (it means that the user should only be able to select one of the 3 storage types defined in the storage type search) , but still allow the change of the storage bin during manually processing of the TO.
The function "allow destination bin change" allows or avoids the entry of all 3 fields "storage type/storage section/storage bin". As we want onlz the bin to be changed, this functionality doesn't meet our requirement.
Do you know some options to achieve this ?
Thanks
Manuel

Hi
Go to transaction CMOd and create a project there and activate it
then find the user exits there for transaction CO01.
you will find it there.
Or go to SE84 and look for enhancement there.
thanks
Lalit Gupta

How to change project to from 4:3 to widescreen (16:9)

I have PREL 7.0 and loaded a project from PREL 2.0 and I want to change the project type to widescreen. Is this possible? I found the project settings but it doesn't seem to be something you can change.

I'm actually working on a slideshow (99% images, maybe a little 4:3 video from a p&s camera). I was hoping for a little extra horizontal room to work with (double up portrait images, panoramas, etc). If I'm understanding you right, I might be able to go ahead and work as if it was widescreen as long as I export it with the correct preset - I just won't be able to see all of what I'm doing in the process.
Is there any way to copy elements of one project to another? The thinking here is that I could start a new widescreen project and copy things over. I tried opening multiple instances of PE7 but it won't allow that. I also tried Edit -> Copy from the 4:3 project, then loading a 16:9 project and pasting but when I loaded the 16:9 project the clipboard must have been cleared (paste not available).
I've done some intricate keyframing in a few spots, so I'd like to avoid starting over from scratch but would favor of not being able to see what I'm doing when editing.

Project Typ

Someone knows which are the differences in the Solution Manager (system, structure) on the types of projects (Implementation project and Optimization project)
Thanks in advance.
FS.

Hi Fabio,
Thanks for clarifying.
You are right - the SAP given standards (Document Type, Status etc.) differ based on Project Type.
Given your context, which is largely 'Functional' and not 'Technical', you have the following two options, in my view:
(1) Implementation Project: If you do not have active 'Solution Landscape' where existing business processes are fully defined, this is the best approach. You can treat your process change project as a mini-implementation project, though you wouldn't have to follow the typical ASAP Roadmap consisting of all those 5 phases. After accomplishing your goal (new way of doing a process), transfer that Business Scenario to 'Solution Landscape', if you want to.
(2) Maintenance Project: If, in your Solution Manager system, people have already started using 'Solution Landscape' and have inherited the Processes from Implementation Projects of the past (one of which you now want to change), you can 'Check Out' those Processes alone into a Maintenance Project, do changes to documentation, structure etc. and 'Check in' that to Solution Ladscape again. This functionality, however, is available from later Support Packs (13 or 15 - not sure where this was introduced)
Please feel free to revert; it's always good to know newer types of uses intended for SolMan.
Best regards,
Srini

Changing project types

Similar Messages

Maybe you are looking for