Changing rate of zoom motion for still image?

Hey everyone,
I'm working on a short documentary and have a large still image I am zooming out of with the motion tab, setting 2 key frames for zoom and center point at beginning and end.
The rate of the zoom goes slow at first and then speeds up more and more as it goes along, and it's going so fast by the end that you can't see the whole image. So I'm wondering how I can give it an even rate of zoom out, or at least slowing it down at the end.
I tried adding another zoom key frame, but couldn't find where the center point key frame was supposed to be, so it wound up changing it's directory a bit at that point.
There's got to be a way to do this. Thanks again!

Yeah, FC doesn't handle this real well. Using the Ease in sometimes works, but I've found that instead of easing in, it sort of adjusts (subtly) the position of the photo.
What I've done in the past is adjust the speed of the photo "clip" to run longer, so the zoom is slower.
I've also thought the original file size of the photo made a difference, a larger file seems to not have this problem as bad, though I have NOT tested this. For me, this seemed to happen when using smaller files. My PS files are around 30MB each! Yes, lots of rendering when doing anything to them, but that does work.
Jonathan

Similar Messages

Can't select "Variable Speed" for Still Image Motion

I am using FCP 5.1 to add motion to still images. I've placed my still images on the timeline and added the appropriate keyframes in the Motion tab of the Viewer to Scale, Rotate, and move the stills on screen to my liking. But the speed is locked to "Constant," and I want to change that.
Specifically, am rolling a still image on-screen, freezing it in the middle of the screen a few seconds, and then rolling it off-screen. Doing this is easy: I just add a keyframe and type in the off-screen coordinates, then add another keyframe and type in coordinates somewhere on screen. But I want to vary the speed that the image rolls on-screen, so it moves on-screen quickly but then gradually slows down until it finally stops (freezes) in the middle of the screen.
Unfortunately, the "Setting" popup menu under "Time Remap" in the Motion tab of the viewer is grayed out and locked to "Constant Speed" (and yes, my still image clip is indeed selected and being displayed in the view). I cannot figure out how to unlock that popup so I can select variable speed.
I can choose Variable or Constant speed just fine for any imported "video" clips -- only still images are locked to Constant for some reason. Is this just a feature limitation of FCP 5? Any ideas would be appreciated.
Many thanks.

Why so much sarcasm in this FCP forum, Studio X?
Yes, it was in the manual, which by the way is quite large. And I didn't say how long it took me to spot that in the manual either -- a long time. I didn't spot it the first time I had read through that section (yes, I had read it before). And the fact is, you didn't know it either, otherwise you may have cared to point it out (for not only myself, but for others reading this forum too).
I participate in numerous other forums on other sites. Many times, people ask questions that are very simplistic to me -- I know the answers and I know those people putting forth the questions could easily have looked up the answer. Nevertheless, I take time to be helpful to others. For truly, some day I may be in their shoes, lacking time to read every part of every manual out there.
I am therefore thankful to those who likewise respond in a tactful manner to my queries, with the productive aim of helping others rather than condemning them. Thank you, David Harbsmeier, for being consistently positive and very helpful in this forum!

How do I create motion for still photos/pictures. I'd like to pan/scan & zoom. Please help!

How do I create motion for still photos/pictures. I'd like to pan/scan & zoom. Please help!

You kind of answered your own question..
Check out Motion in the FX Control Window and learn how keyframing works..

Motion for still Photography???

I want to ask you guys if any of you have used Motion for still photography, lets say portraits and more specifically with chromakeys..
the thing is I was looking for doing some stuff with a PS plugin called Primatte Chromakeyer, so I downloaded the demo and its way cool, but dont have the money to buy it right away...
so my thinking got started (it usually does not do anything) but this time I tried using motion on one of the psd samples the Primatte had in their site...
I opened a new motion project and sized it to the sample picture size and change the aspect ratio to square pixels, and then applied my DV Matte Blast from dvgarage.com and it worked out fine, then did the same image using the primatte RT from motion and looked a little better then just exported to a JPEG image and compared the files... they quite looked the same but the color was contrasty just a bit...
so what you experienced motion users think of these matter???
heres the sample image:
http://nogalesdefiesta.com/media/applediscuss/crhomatest.jpg

I made another test, these time I used only the DV Matte Blast on my image,
all other procedure is the same as the first post, so this time I changed the export settings to use the Photoshop setting, it gave me the cut out image with a black backgroung but no alpha, so I had to re-export the image but this time I move the settings so it would just give an alpha (it gave me a black and white image, a matte)...
now in photoshop I just added this matte to an alpha channel to the original image and it gave a good result....
here my latest shot at it:
/___sbsstatic___/migration-images/459/4593102-1.jpg
what I'm getting out of this???
if I just want to change a couple of images it will do the trick...
but still if a want to do more portait stuff, I guess will have to go with the Digital Anarchy Primatte Chromakeyer....
but it certainly works this way, but can't go over 2048x2048 pixels.

What PS file settings are used for still images for FCE?

I have images to use/create for the titles and transitions in my first FCE4 project. Using Photoshop CS6, the preset for File > New > Film & Video has the prest size and pixel aspect ratio selections. I thought to use this with HDV 1080p/29.97 and HDV1080/DVCPRO HD 720 (1.33) for any images I need for the project.
Most discussions I see only refer to the pixel size reference for HD image sizes, but nothing addressing the pixel aspect ratio setting for the image. Are these settings ignored in PS and handled in FCE only? Or does it make better quality images to get this "right" in PS when creating the still image?
Thanks in advance.

I'm not quite sure I understand your question. In an ideal world, the graphic material you build in PS should match the sequence settings you intend to edit them into - so, if for no other reason, it reduces the amount of reformatting FCE has to do when rendering them.
But frequently you want to build graphics larger than the frame size of the sequence so that you can re-size and reposition the graphic within FCE without losing quality.
The apparent pixel aspect ratio of your graphic can be controlled with FCE by editing the graphic to the timeline, double clicking on the clip in the timeline, and when that timeline clip opens in the viewer, click on the motion tab and adjust the Aspect Ratio Paddle (this is the correction for a 1920 x1080 square pixel clip being placed into an HDV 1440 x 1080 timeline):
In Photoshop, you can change the way your work is displayed by going to the menu View > Pixel Aspect Ratio:
Does any of this help?
MtD

Has anyone used Motion for 'still graphics' (300dpi)?

I used Motion a lot several years ago on a film. Great app. I'm producing a series of Ebooks right now, with many graphics. I'm using Pages, Photoshop, EasyDraw, for the graphics ... but remember how marvelous Motion was.
I'm wondering if it is possible to use Motion just for doing still graphics? And how one might set the resolution to reflect this (something like 300 dpi), ... or can one set any size (a very large 72dpi (given it's designed for motion and video) that can then be translated to 300 dpi after the fact.
If anyone has ever used Motion for simple non-motion graphics, I'm all ears,
Ben

First of all, create a new document in Photoshop: enter your output format (US Letter, A4, whatever) with 300 dpi settings. Then change your units from to pixels and that is the size that your motion project should have.
Remember though, that Motion outputs only in RGB that has a much wider gamut than CMYK, which is the colorspace of print. So you might still have to color proof your image in Photoshop.
Also, depending on your graphics card, Motion has a limit of image sizes it can work on: 2K, 4K or 8K in the current models. For large print formats that could be not enough.
I would never use Motion for print jobs. However I can imagine that I could export (with transparency) some effects like stills from animated particles, 3D replicators and import them into my photoshop composition. So Motion could be used more like an extra tool.
Michal

Pixel dimensions for still images

Hello all,
I have just ran into a problem that seems to be a sizing problem with Final Cut Express HD. I used to crop my still pics to 1366 px - 768 px (for landscape) and then import them to FCE and export as a quicktime movie. When I brought the quicktime movie into iDVD and created the DVD it seemed to play great on my 46" Samsung tv -- full screen.
I just recently bought a Samsung 60" and when I create the same type of movies, I am getting a huge black border around the whole image (not just top and bottom but sides too). I tried creating a new movie and made all my still images 1920px x 1080 px, and it still comes out the same way.
I can stretch my tv so that they go full screen, but I think there should be a way to create the movie without having to stretch it....just have the tv set for 16:9, and I feel that it should work.
Any help would be greatly appreciated...thanks.
Norm

When you create a DVD, no matter what the pixel dimensions of your original material, it become 720x480 Standard Definition. This is what a DVD is. If you are creating a DVD that has material that is 16x9, then it creates a DVD that is 720x480 but plays back anamorphic, stretching to create the 16x9 screen.
If you play one of your older DVDs that played correctly on your previous TV, does it play correctly or does it also exhibit the black bars?
If it plays correctly then something has changed in the way you are creating your project in FCE.and encoding and burning the DVD.
If the older DVDs also exhibit the same playback problem, then I believe there is a menu setting on your new TV that will tell it how to display Standard Definition material from your DVD player, and you need to adjust that. (There are also settings in the set-top DVD player that tells it what kind of signal to send based on the what kind of display it is hooked up to.)
MtD

Poor rendering quality for still images

I have opened a new project with PAL DSLR settings (1080p, 25fps).
I have added a full res (about 4000px x 3000px) still image to the timeline and added a pan effect to it. When I view the preview in PE it looks fine. However, when I render the clip the quality is very poor in the preview.
I have tried exporting the clip to a file and this plays fine, but the preview does not look good.
Any ideas why the rendering should have this effect?

pickera2
I have a few things for you to consider and tryout if interested.
First, you are taking a 4000 x 3000 4:3 still into a 1920 x 1080 16:9 project (you say project preset = PAL/DSLR/1080p/DSLR 1080p25).
Your problem is confined to the preview of the pan and zoom result using the Pan and Zoom Tool (I am assuming the you are using Premiere Elements 10 or 11 or 12...I do not recall that you said which one).
Edit Menu/Preferences/General includes the preference "Default Scale to Frame Size" and it does just that. It is typically found ON. So, when your 4000 x 3000 pixels still is imported, the program tries to fit it as best possible into the 1920 x 1080 16:9 space set up in the Edit Mode monitor (Magnification = Fit) by the project preset. In your case, you would expect to see the following with black borders:
Is that what you are taking into the Pan and Zoom workspace? Or are you scaling what is seen there so that the image just fills the 1920 x 1080 space? Does it look like the following after scaling, if you do scale to fit?
And important point to remember is that whatever the case, the Pan and Zoom workspace is not referencing what is seen on the Timeline, but is instead referencing back to the original at the hard drive save location.
An alternative to all of this includes
Bringing you image into the project with the Default Scale to Frame Size disabled in preference. Then the 4000 x 3000 will overflow the space in the 1920 x 1080 monitor. You would then ignore what you see in the Premiere Elements workspace, select the Pan and Zoom Tool to open the Pan and Zoom workspace, and do your pans and zooms on the image that you see there. Click Done when finished. Back in the Premiere Elements workspace render the Timeline and scale what you see in the Edit Mode monitor as needed.
You also might want to look at beforehand cropping your 4000 x 3000 4:3 to 2200 x 1238 pixels 16:9 and using that as your source media with or without the Default Scale to Frame Size enabled.
Please view to see if the previews look any better and/or there are improvements in the export.
Thanks.
ATR

Better zoom method for viewing image

Why can't they have the same type system as in Elements or full ps? Control + or - to change size and smaller jumps in size. And keep the same style slider thingy in both develop and library modules.
And of course ability to separate panels on another monitor. Image size is EVERYTHING when you're trying to make adjustments.

Ctrl + and = (which has - on it also) zoom in and out through the 4 zoom levels visible in the Navigator. If you require the final zoom to be larger than the default 2:1, then select it from the dropdown and LR remembers this for the final zoom..
As to the difference between Quick Develop and Develop, Quick Develop does RELATIVE adjustments, which are there for quick settings. It's useful for brightening images which have different exposure settings for example, where doing the same in Develop would force them all to the same ABSOLUTE value. The idea is to use it to help get to the Pick files quickly before Developing these files. There's no sense in developing 1000 files when you ultimately will only bring 10-20 top quality ones out at the end.
As to image size, Try Tab and Shift TAB.

Motion importing still images

I have imported a still image/logo and I want to work on the vairous layers of the TIFF however I am not given the option the import in layers? I have it as a TIFF or JPEG does this mean that I can't access the various layers, will the image be flat as a single image , I want to manipulate the layers individually.
1. I go to file
2. import file
at this point the file is imported but I am not given the option to import all layers
if this because it is not the correct file type?

ok so I have JPEG files and I no longer have access to the designer sadly and I want to add them into Motion and animate the layers of the composition
does anyone have any suggestions how I might achieve this goal
1. how do I change a JPEG into a PSD file basically?

Adjusting time for still images

Is there an easy way to import a series of still images into the timeline and make them all display for the same duration? OR does the time need to be adjusted on each individually?
Thanks.

Changing the default still duration only changes the duration of the master clips that imported to the project. You would have to re-import all the still after changing the default duration for this to work.
However, if you drop a bazillion stills into a timeline, you can select them all and choose a new duration, it will be applied to all of them, provided they all start out at the same duration.
Hope this helps -
Max Average

Format for still images

I recently made a slideshow in FCE, some of the images appeared stretched on my widescreen TV. What format should I use in the easy set up. A couple months ago I made a slide show and the still images looked fine on widescreen, but forgot how I did this. Thanks

Your widescreen TV should have an aspect control which you can set for 4:3 presentations.

Need help changing size and aspect ratio for 500+ images

Thank you for reading this! I have about 500 images of people in different poses. They're all extracted on a transparency as PNGs. They vary in aspect ratio, dimensions and position of the person within the frame - for some the feet are very close to the bottom of the frame and for some, they're higher up. I need to equalize all 3 of these qualities, so that if superimposed, they look like a video unfolding with the same zoom. My ideal size would be 800x800 at 300ppi.
Is there a way to batch even a part of the process and keep the png format? I had the images in PSD initially but they were too massive so creating catalogs with them was prohibitive.
If not possible to do a batch, what would be the best (easiest) and fastest way to do it? I'm thinking that maybe creating some template where an oval shape the size of the head can help create consistency of the size of the person and a line that helps set up the distance from the bottom?
I so appreciate any help you have to offer. Part of my problem is that I don't know what these processes are called so I don't even know what to search for. If you can even name the actions that I need, it would be of great help. I already paid a designer to do the extraction and they were supposed to do this formatting as well and they didn't so my budget is shot. I'm hoping that if I understand what the steps are, I can do them myself.
Thank you!

If you download my crafting actions package you can record an action that uses one of my plug-in scripts to do that process. You could then batch that action and process your 500 png image files.
Crafting Actions Package UPDATED Aug 10, 2014 Added Conditional Action steps to Action Palette Tips.
Contains
Action Actions Palette Tips.txt
Action Creation Guidelines.txt
Action Dealing with Image Size.txt
Action Enhanced via Scripted Photoshop Functions.txt
CraftedActions.atn Sample Action set includes an example Watermarking action
Sample Actions.txt Photoshop CraftedActions set saved as a text file.
More then a dozen Scripts for use in actions
Example
Download
Step 1 Select layers transparency
Step 2 Copy
Step 3 Paste
Step 4 Select all
Step 5 Align Layer s to selection vertical center
Step 6 Align Layer s to selection horizontal center
Step 7 Select bottom Layer
Step 8 delete current layer
Ste9 9 Fille>Automate>AspectRatopSelection... In the dialog set 1 1 ratio center rectangle replace selection feather 0
Step 10 Image Crop
Step 11 File Automate>Fit Image. In dialog enter width and height 800
Step 12 Image size in the dialog uncheck Resample and enter 300 in the resolution field.
I'm sure the should work you mane not need the copy paste and it depends on how Photoshop treats the PNG layer the canvas size or just the pixels.
This may also work
Step 1 Select all
Step 2 Align Layer s to selection vertical center
Step 3 Align Layer s to selection horizontal center
Ste9 4 Fille>Automate>AspectRatopSelection... In the dialog set 1 1 ratio center rectangle replace selection feather 0
Step 5 Image Crop
Step 6 File Automate>Fit Image. In dialog enter width and height 800
Step 7 Image size in the dialog uncheck Resample and enter 300 in the resolution field.

How do you fix playback quality for still image video on Adobe Premiere Elements 10?

Hi there, I'm a new editor, and am still wanting to make my first awesome video. I find that when I do a still motion video all quality is very bad, and a little blurry. I asked that question and someone told me to fix the playback quality and I do not know how to fix that. If you can answer my question, please also give me the instructions too.

First, read these...
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967
-And another crash report http://forums.adobe.com/thread/973935

Image size for still images

I've got a bunch of 300DPI 8x10 inch images I want to put into iMovie.
Do I need to reduce file size or will iMovie reduce the size automaticlly?
What is the smallest DPI I can use and still have a good image on a 9foot by 12 foot screen.
Thanks.

Hi Dennis:
Look here for a full discussion on the issue:
http://discussions.apple.com/message.jspa?messageID=961029&ft=y&#961029

Changing rate of zoom motion for still image?

Similar Messages

Maybe you are looking for