Changing Sounds...Any Word?

Any word if the 2.0 Software Update will enable you to change sounds on your iPhone (incoming email, outgoing, etc.) Surely, they had plenty of people ask for that option. My problem is with the incoming email sound, I can't hear it in louder environments.

yes, I know, however only one of the sounds is not an annoying sound. The rest are horrible.
Why on earth would I want to be notified with a double glass tap or a chime or what the..... a horn or bell!?!?
Seriously, the only one worth while is the tri-tone and chime. the rest are worthless. imo =-)
I just hope that they realize that and add others or allow us somehow to get our own.

Similar Messages

  • I have mid 2009 Mac Book Pro running 10.9.1. The hdmi mini port no longer supports sound on the Sony TV. This is apparently a change. It no longer shows as an option in system preferences/sound.Any ideas?

    I have mid 2009 Mac Book Pro running 10.9.1. The hdmi mini port no longer supports sound on the Sony TV. This is apparently a change. It no longer shows as an option in system preferences/sound.Any ideas?

    The 2009's didn't support sound on HDMI. That came in 2010. Are you sure it ever worked?

  • Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
    You are likely to get poor connections and dropping out.
    If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
    There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
    http://forumhelp.dyndns.info/networking/powerline3.jpg
    I will monitor the subject line of this thread, should you want to post any more information.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • When i type any word in address bar, it is search by "speedbit", How i can to change it into google searching ?

    when i type any word in address bar, it is search by "speedbit", How i can to change it into google searching ?

    When you ''reset'' keyword.url, you blank the entry. Firefox doesn't know what to do with the keyword you've typed in, so it adds www. to the front, and tacks .com to the end and takes you www.test.com.
    You need a new search engine entry. '''Try making keyword.url = http://www.google.com/#q='''
    Every once in a while a rogue search engine wrecks my browser, and I end up scrambling for this very answer. I hope the devs will create an easier fix for future versions.

  • Changed AppleID p-word and now can't login to icloud on mac mini. I use correct password and I get spinning grey wheel. I know it's the correct password cause any other p-word gets error message. Also, my time capsule is blinking amber.

    Changed AppleID p-word and now can't login to icloud on mac mini. I use correct password and I get spinning grey wheel. I know it's the correct password cause any other p-word gets error message. Also, my time capsule is blinking amber. I've reset my password a few times and it doesn't help. Also have shut down completely and unplugged everything to no avail.

    Hey jamesarm97 & diegofoto,
    On August 21st, some users may have been unable to access iCloud services for a short period of time. Apple worked quickly to resolve these issues, however you two may have experienced them. To check the current status of these systems please see:
    Apple - Support - System Status
    http://www.apple.com/support/systemstatus/
    If either of you are still experiencing issues, you may want to troubleshoot with the following articles:
    iCloud: Troubleshooting web browser issues with iCloud.com
    http://support.apple.com/kb/TS4050
    iCloud: Account troubleshooting
    http://support.apple.com/kb/TS3988
    Thanks,
    Matt M.

  • I was working on mail and arrow with nice airplane sound disappeared and changed to the word sent how do i go back to arrow ?

    i was working on mail and arrow with nice airplane sound disappeared and changed to the word sent how do i go back to arrow ?

    Launch Mail.
    Start "New Message".
    Click "View" in the menu bar and then "Customize Tool Bar".
    Customize Toolbar sheet should drop down.
    At bottom left there is "Show" pop up box, click it and select "Icon and Text".
    Click "Done".

  • Regex: for any word, find word+s and y/ies

    Hi all
    This sounds pretty simple, but I'm trying to create a regular expression whereby, for any word, the matcher will find all instances of that word OR it's plural.
    Now, if it were just adding +s, I know I could do Pattern.compile("\b\Q" + word + "\Es?\b");
       // note, this forum seems to spaz when I use double-slashes, so I omitted themHowever, if it ends in a "y", like "try", I need to find words that end in "ies", like "tries".
    At first I thought of making two cases in the pattern, one as above, and one were the last letter is subtracted and you check for (y|ies). HOWEVER, without first knowing if the word ends in a "y", it could take "do" and change it into "dies", and then mistakenly find it.
    Of course, I COULD have a whole bunch possible patterns seperated by a bunch of IF-THENs... "if it ends in a y, Pattern pattern = Patern.compile(...."
    ... but this doesn't seem very elegant.
    So, how can I create a pattern that will check for "ies" ONLY if the word ends in "y" (and +"es" if it ends in an "s" and so on...)?
    Thanks!
    Tim

    <div class="jive-quote">
    <span class="jive-quote-header">uncle_alice wrote:</span>> ... but this doesn't seem very elegant. If you really want to do it right, you'll use a stemming algorithm, but if you stick with regexes, the brute force approach you've already outlined is as elegant as it gets.
    </div>
    You'll also need a stronger definition of plural. I don't know how in-depth you need this to be, but some words are pluralized by adding "es" or "ues", some by changing "us" to "ii", etc. I really can't see how using regex is going to make this easier.

  • How can I change a Microsoft Word document file into a picture file?

    How can I change a Microsoft Word document file into a picture or jpeg file? I am wanting to make the image I created my background on my macbook pro.

    After I had the document image the way I wanted it, I saved it as a web page and went from there. Below are the steps starting after I did the "save as" option in Word:
    1) Select "Save As Web Page". I changed the location from documents to pictures when the window came up to save it as a web page.
    2) Go to "Finder" on you main screen, or if it's on your main toolbar at the bottom.
    3) Click on the "Pictures" tab and find the file you just re-saved as a web page. (I included "web page" or something similar in the new title so I could easily find the correct file I was looking for)
    4) Open the correct file and then "right click" on the actual image. (Use 2 fingers to do so on a Mac)
    5) Select 'Use Image As Desktop Picture", and voilà! The personally created image, or whatever it is that you wanted, is now your background.
    **One problem I encountered while doing this is that the image would show up like it was right-aligned in relation to the whole screen. The only way I could figure how to fix this was to go back to the very original document in Word, (the one before it was saved as a web page), and move everything over to the left.
    I hope this helps someone else who was as frustrated as I was with something that I thought would have been very simple to do! If you have any tips or suggestions of your own, please feel free to share. : )

  • PDF is changing all my pdf documents into a word document - My boss sent me a pdf email through outlook and when I try to open it changes to a word document

    PDF is changing all my pdf documents into a word document - My boss sent me a pdf email through outlook and when I try to open it changes to a word document Help this is so frustrating

    Hi tinam74565130,
    That does sound frustrating! It sounds as though the filename associations have become confused on your computer. You should be able to reset that easily. Here are some instructions:
    Change which programs Windows uses by default - Windows Help
    How to change the default application for a file type | Macworld
    Please let us know how it goes.
    Best,
    Sara

  • Followed instructions but cannot change PDF to word - Showing doc has virus but does not

    Followed instructions but cannot change PDF to word - Showing doc has virus but does not

    Acrobat does not perform any virus checks. So, it appears that you are using one of Adobe's online subscription services.
    Use the link below to go to the Adobe Document Solutions page. Select the service you've subscribed to.
    Log in. Locate and use the "support" link. "Chat" is offered to service subscribers.
    Discussion of your issue with the service's support ought to see you through the issue.
    Be well...

  • Using OS X 10.6.8 on my IMac, I find that items on my message list no longer "fade" from dark to light when I click on them. I recently switched the font from Arial to Helvetica to permit me to select italics for any word. I am composing in rich text.

    Using OS X 10.6.8 on my IMac, I find that items on my message list no longer "fade" from dark to light when I click on them. I recently switched the font from Arial to Helvetica to permit me to select italics for any word. I am composing in rich text.

    Not sure why it would default to IMAP?  But any how, start the account anew, fill in the first page of info, but before clicking on the Create button, hold down the Option key until the Create button changes to read Continue.  Click continue, and proceed in a more manual process during which you can set the account type as POP.
    Ernie

  • Switching: Seeing "track changes" from MS Word

    I know Pages does not have a track changes function as in MS Word. I also know of the comments function in Pages, which I prefer anyway.
    But when you use Pages, can you see text marked with track changes in a Word document?
    A friend of mine put in an effort to help me edit something I have written. I use Pages, he uses Word, so I exported my doc to Word and sent to him. He edited it using track changes and sent it back to me (still as a Word doc). Problem is, in Pages I can't see what changes he has made, or comments inserted in Word.
    Is there something I can do to make Pages display what you would see if you were using Word?
    I don't want to use any Microsoft products...

    Thanks. That is exactly the situation, I can see the new text but no way to see what it used to be, or even that a change has been made. So it is real hard work to go through and check for places where changes might have been made. If I could at least get a mark in the margin to identify a site where something has changed it would help a lot, but I have found no way to do that in Pages.
    I have OpenOffice, but I just find that Pages is a lot nicer and I don't want to start using that just for this. Anyway I can't figure out how to get OpenOffice to show where changes have been made either. Can't see using a multitude of different programs for text editing...
    The best I have come up with is to get my friend to send me his MSWord file as a .pdf, so I can at least see where the changes are and make them myself in my original Pages document.
    But I would rather there was a way to get Pages to do what I need...

  • How to Change the Volume Changing Sound

    How can I change the volume changing sound? I don't want to turn the sound off but I dislike the sound it makes when the volume changes currently.

    Eireannsg1 wrote:
    Yea, that reason sounds silly.
    There are always 1001 reasons why it isnt being done because someone just doesnt WANT to do it.
    It only sounds silly to you because you don't really understand the reasoning - obviously. Back in the days of CEP, this software did have a direct link to whatever mixer was being used - almost invariably the internal Windows one. And it was removed. A lot of sound devices simply don't provide links into their mixer panels any more - you run them standalone. On top of that, sound devices these days don't always use the same driver system, and also a lot of devices access Audition by external linking software, like ASIO4ALL. All of these things combined make it not as simple as you seem to think to implement something like this.
    So it's not a case of no-one wanting to do it - it was actively removed, because strictly speaking it's not something that Audition should be legitimately addressing. Audition is an editor, and multitrack system, not a machinery controller. That's why its internal mixer is a purely virtual device, and has no direct influence on any of the hardware, except to determine the available inputs or outputs that it addresses.
    So typically with the devices I use, if I want to control the physical attributes of them I leave their control panels open, almost invariably on a second monitor. And that is entirely sufficient.

  • Data Allowance?!? Any word on Verizon allowing us bigger data plans?

    Is there any word on Verizon allowing bigger data plans? I understand it's a money making business, but we can't continue to get robbed for our pocket change everytime we decide to use the network... Your data calculator is broken, please realise this and fix it - Aaron

    > Is there any word on Verizon allowing bigger data plans?
    No.  Even if there was it wouldn't mean anything without an official statement from VZW confirming it.  Anything else shared in here is speculation.
    > Your data calculator is broken
    The data calculator (http://www.verizonwireless.com/b2c/splash/dataShareCalculator.jsp) is only an estimation tool.  It should not be relied upon for actual usage in any way, shape or form.  Real usage is always going to be different than whatever VZW programs into this tool.  Perhaps you are referring to something else?
    "These are just estimates, and data transfer amounts will vary. Video calling application and settings in use along with network and conditions may impact the amount of data consumed. Downloads that buffer, such as streaming music and video, will bill for all of the data that has been downloaded, even though you may not have listened to or watched the entire download. Please regularly check and manage your usage.
    * Can exceed 3 MB with graphically intense pages or with video.
    ** Using high quality audio."

  • I have an ipod 160 and have only been able to copy about 12000 songs to it.  now it is telling me it cannot copy my last 894 mbs.  any words of wisdom?

    I have an ipod classic 160gb and have copies 12000 songs down to itunes to move to it but at the last minute i got a message that it will not accomodate 896 mb of what I have copied to itunes.  any words of wisdom?

    You have to open the iTunes program, on the file tab there is an option to "create new version" you click on this option and goes to change iPod or iPhone version. If you want to change the version of videos you click on iPad or TV version, and these will appear in movies because  the format is MPEG-4.
    Care with the music, you repeat music tracks, and maintains the old format version.
    I hope it helps.

Maybe you are looking for