Changing the port of JBoss Server

Hi All,I want to change the default port of JBoss server from 8080 to some other port.How to do this?Thanks in advance.

There are JBoss forums out there....
But since I know the answer, I'll tell you, at the risk of rewarding your laziness. To change port 8080 to eg. 9090...
Alter server.xml, mine is in
D:\Apps\jboss-4.0.2\server\default\deploy\jbossweb-tomcat55.sar\server.xml
Alter this setting....
      
      <Connector port="8080" address="${jboss.bind.address}"
         maxThreads="250" strategy="ms" maxHttpHeaderSize="8192"
         emptySessionPath="true"
         enableLookups="false" redirectPort="8443" acceptCount="100"
         connectionTimeout="20000" disableUploadTimeout="true"/>to this
      
      <Connector port="9090" address="${jboss.bind.address}"
         maxThreads="250" strategy="ms" maxHttpHeaderSize="8192"
         emptySessionPath="true"
         enableLookups="false" redirectPort="8443" acceptCount="100"
         connectionTimeout="20000" disableUploadTimeout="true"/>regards,
Owen

Similar Messages

I am trying to set up my outlook 2007 account on i pad and the process sticks on verifying. It would appear to be a problem with outgoing server and I have changed the port number but with no success.

I have just purchased an i pad 2 and am having trouble with the e-mail set up. Set up with wi-fi, i-cloud etc has worked fine but the i pad is recognising my outlook 2007 account details but is not verifying it. The trouble appears to be with the outgoing server and I have tried changing the port number, but to no avail! Also reset the account settings for holding messages on the server...help! As you can tell I'm not very techy and I'm desperate to get the bloody thing working as I'm going away on Tuesday! Any suggestions?

I had a similar issue and it was password case sensitive issue

My provider changed to pop3 port 995 incoming and port 465 outgoing. Now it no longer works. I went into the Thunderbird 28 beta and changed the ports

I have Thunderbird 28 beta. After changing the ports, I no longer receive mail and this is the error message going out:
Sending of message failed.
The message could not be sent because the connection to SMTP server mail.3dcartstores.com timed out. Try again or contact your network administrator.
Passwords have not been changed and I have to login on the web

What are the exact instructions from your email provider?
Please post your Troubleshooting Information.
AppMenu button - Help - Troubleshooting Information

How to change the port in the URL of a BSP Iview

Hello,
we have several appraisal templates released in our R/3 system and we can access them by the portal.
We are changing our systems and we are implementing a load balanced in order to improve the connections with the portal. So we need to know how can we change the port of the server that appears in the URL when we go to MSS ->teamviewer and select one appraisal to see the information of the template.
We need to change it and indicate the port of the load balanced http://emsapl404pre.endesa.es:8000/sap/bc/bsp/sap/hap_document...) not the port of one of the WAS server as we have now http://emsapl404pre.endesa.es:8302/sap/bc/bsp/sap/hap_document...)
Thanks in advanced.
Best regards.
Seshen

Hi,
Just view any BSP Application in SE80 and the click on Utilities(M)->Settings.
This will fgive you option to change URL and port number of the URL..
It will be under the Business server Pages tab in the settings window.
Hope this helps.
<b><i>Do reward each useful answer..!</i></b>
Thanks,
Tatvagna.

Can't change the port

A while ago, while in a library and trying to iChat/text with my wife and getting errors I attempted changing the port to 443 to solve the issue. It helped and I was able to chat.
Now I'm having problems Vchatting and thought I'd change the port back to 5190. But I can't. When I open preferences and go to server settings and click on the port settings it's like clicking on a frozen window, nothing happens.
I realize changing the ports may or may not solve my problem, but why on earth can I no longer change the port settings?
Thanks

Hi Daniel,
You first have to log out of your AIM account.
(you can log out by selecting iChat's pull down menu and select "log out of AIM)
Then you will be able to change the port.
JP

Is it possible to change the port number of an already installed ITS?

Hello,
I've done an install of the latest ITS stand-alone application (win2k server , IIS). It was installed on port 81.
Is there an easy way to change the port number of this ITS installation without doing a new install? I know there are port references in the itsregistrywgate.xml file but was not sure if these were maintained during install or by reading the global.srvc file entries.
I've taken the simplistic steps of changing the port number in IIS and the global.srvc file but that does not work. I get a 403.2 read access forbidden error.
Any advice would be much appreciated.
Thanks,
Graham

Hello Graham,
yes, it is possible but depends on what you want.
For IIS, WGate is depending on the following items:
ISAPI wgate (the filter API that triggers on /scripts/wgate) which is normally a general isapi for all webserver instances.
the virtual directory "SAP-WGate-Scripts" which exists for the according "virtual" webserver instance.
the (web)servername in wgate registry, which points to your virtual webserver
the "Port" in the URL section in wgate registry.
So, if you want to change the port (e.g. from 81 to 82) for both your virtual webserver and the wgate then go ahead.
But if you want an extra virtual host (e.g. on 82) then:
create the virtual host on 82
create a "SAP-WGate-Scripts" directory on this 82 host exactly as the one on the 81 host.
change the "Port" in the wgate URL section.
if you also have an own docroot directory you have to copy the SAP mimes from the 81 docroot to the new one.
The only thing that will be wrong afterwards is the webservername, this will have no effect on the runtime behavior but at the next patch install you will get an extra dialog to identify your webserver again.
If you wanted to go for the latter scenario then it might be less work to add a new instance by install e.g. a dual host wgate on the new virtual host or a single host install (with a dummy agate).
Afterwards you can play around with the WGate configuration to change it to your needs.
Regards,
Fekke

OEM Can't get to database after changing the port on the database

Hello OEM Gurus!
I had to change the port on a database(11g) from 1521 to 1526. I adjusted the listeners to include the SID (finapp1t) in the listener listening on port 1526. I removed the SID from OEM (10g btw) and rediscovered it. It successfully rediscovered.
Now I receive the following when I attempt to go into "tablespaces" or "tables" on the FINAPP1T database page:
Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: (description=(address=(host=urora2t.unioncentral.com)(protocol=tcp)(port=1521))(connect_data=(sid=finapp1t)(server=dedicated)))
I then clean started the Agent on the server but I get the same results.
OEM seems to think that that database FINAPP1T is still using port 1521. I can connect to the database on port 1526 from my Desktop so I know the listener sees this database.
How do I tell OEM to update the port ?
Thanks for you help!
Edited by: sawright on Mar 29, 2012 10:33 AM

Success
The connection test was successful.
=============
Information from Review Screen:
Name Value
Oracle home path /u01/app/oracle/product/11.2.0/dbhome_1
Monitor Username dbsnmp
Monitor Password ******
Role NORMAL
Listener Machine Name urora2t.unioncentral.com
Port 1526
Database SID finapp1t
Preferred Connect String
Edited by: sawright on Mar 29, 2012 11:24 AM

Changing the port in iChat

Long ago I captured the following from this discussion board:
Open iChat.
Go to Preferences > Accounts.
After selecting the AIM Login account in the left hand list go to Server Settings tab.
With iChat logged out of AIm change the port from 5190 to 443
Log in to AIM<<
I'm curious if this is still a problem solver? I don't believe I've had trouble camming but I've only done mac to mac. I did have two 3-way chats that never materialized because I never got the screen showing the people.
But back to the quote, What is that change for? Should we make it?

Hi Eddie,
It was first found that Zyxel modems benefitted from this change. For some reason Zyxles do not like logging on to port 5190 and Video chatting.
More recent modems and routers have added protocols to the Port Forwarding set ups. This can have porblems when Port 5190 has to log in to AIM on TCP and have the UDP protocol for File Sending and Groupd chats and Buddy List updates.
In these cases it is worth changing the port to 443 to free up 5190 for UDP only.
6:51 PM Thursday; June 8, 2006

How Can I Change the Ports for WebDAV file shares.

Title says it all. I have another piece of software using port 80 and 443, I'd like to create iOS shares using WebDAV but I can't find anywhere in the GUI to change the port numbers and I can't work out whether I need to do something involving Apache virtual hosts and if so which config files are relevant to the WebDAV server.
Someone must have done this by now, anyone know how its done???!!!!
Thanks in advance.

OK, so I worked out which files to edit and I actually managed to change the Apache/WebDAV ports on a clean 10.8 Server.
By clean I mean I installed 10.8.0, updated to 10.8.3 via the combo updater, then installed the latest version of Server app and configured the services.
Having done that I was able to make the required changes and all is working well. I then replicated the process on my live server but it throws up an error when I try to start up the WebDAV sharing.
This thread outlines the same issue:
https://discussions.apple.com/thread/4199421?start=0&tstart=0
I am getting this exact problem, in that any manual change at all to the 0000_any_443_.conf file will cause WebDAV to fail to start. This is annoying because I need to change that file. Its also annoying because the problem isnt there on my 'clean' server.
I deleted the entire /Library/Server/ folder and the Server.app and reinstalled Server.app from the App Store, recreating the /Library/Server folder from scratch. This cleared out the apache config files which I tried to re-modify, but all the file sharing settings were retained. Does anyone think it would be worth deleting all the sharepoints? Any other ideas?

How to change the port number for deployment in JAVA Studio Enterprise 8?

Hi!
Yesterday i downloaded this new sun java studio enterprise and found it mind blowing.
Now i find that all my previous applications which were running on port 8080 can't be run on sun java studio enterprise(sjse) 8.
Can anyone tell me how to change the port number on this software so i won't have to edit all my applications?

http://docs.sun.com/source/819-0080/install.html
In the Admin Configuration page (or at the command line), enter the following:
Admin User Name�Name of the user who administers the server
Password�Admin user�s password to access the Admin Server (8-character minimum)
Admin Port�Administration port number for initial server instance
HTTP Port�Port number to access the default server instance
HTTPS Port�Secure port number to access the default server instance

Change of port for Livecycle server

Hi all,
When we first setup our Livecycle server we configured it running on a non-standard port and have experienced repeated headaches with people behind corporate firewalls not being able to open documents secured with Rights Management.
We'd like to reconfigure our installation to solve this (change the port) but will this mean all our documents will stop working? Will we have to re-apply RM policies and then redistribute all of our documents?
Thanks,
Andrew

Hi,
Based on your description, I guess that you install the backup software on Windows Server 2012 Essentials firstly,
and then configure Direct Access. Then you find there is an issue of port 25566 conflict. If anything I misunderstand, please don’t hesitate to let me know.
Changing the default port of Direct Access on Windows Server 2012 Essentials seems to be not a good idea. Would
you please let me know more information of this third-party backup software? You may contact with vendor of the backup software and confirm which service (or any other) listens on port 25566. Meanwhile, confirm if we can change port 25566 of the backup software.
By the way, for backup, Windows Server Essentials provides reliable ways to perform regular backups of your
server and backups of your network computers. For more details, please refer to the following article.
Manage Backup and Restore in Windows Server
Essentials
Hope this helps.
Best regards,
Justin Gu

Can't change debug port on Weblogic server

Despite changing the port number on the {DOMAIN}/bin/setDomainEnv.sh script and on the {DOMAIN}/init-info/startscript.xml file Eclipse (Galileo + latest OEPE) doesn't honor that.
When the server is started on debug mode from Eclipse the listening port is 8453 which is the default.
This is the [Eclipse] console output:
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=...............
PATH=....................
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
Listening for transport dt_socket at address: 8453
java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Client VM (build 11.0-b16, mixed mode)
Starting WLS with line:
java -client -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Xverify:none -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=/opt/bea/wls10.3.0/wlserver_10.3 -Dwls.home=/opt/bea/wls10.3.0/wlserver_10.3/server -Dweblogic.home=/opt/bea/wls10.3.0/wlserver_10.3/server -Dweblogic.management.discover=true -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true -Dweblogic.ext.dirs=/opt/bea/wls10.3.0/patch_wlw1030/profiles/default/sysext_manifest_classpath:/opt/bea/wls10.3.0/patch_wls1030/profiles/default/sysext_manifest_classpath:/opt/bea/wls10.3.0/patch_cie660/profiles/default/sysext_manifest_classpath -Dweblogic.Name=AdminServer -Djava.security.policy=/opt/bea/wls92/weblogic92/server/lib/weblogic.policy weblogic.Server
Listening for transport dt_socket at address: 8453
Any ideas on why this may be happening?
Thanks.

Did that.
This is an extract from setDomainEnv.sh:
if [ "${DEBUG_PORT}" = "" ] ; then
*DEBUG_PORT="9000"*
export DEBUG_PORT
fi
But regardless of what I put in there I see this on Eclipse's console:
/usr/local/jdk1.6.0_11/bin/java -client -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,*address=8453*,server=y,suspend=n -Djava.compiler=NONE -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Xverify:none -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=/opt/bea/wls10.3.0/wlserver_10.3 -Dwls.home=/opt/bea/wls10.3.0/wlserver_10.3/server -Dweblogic.home=/opt/bea/wls10.3.0/wlserver_10.3/server -Dweblogic.management.discover=true -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true -Dweblogic.ext.dirs=/opt/bea/wls10.3.0/patch_wlw1030/profiles/default/sysext_manifest_classpath:/opt/bea/wls10.3.0/patch_wls1030/profiles/default/sysext_manifest_classpath:/opt/bea/wls10.3.0/patch_cie660/profiles/default/sysext_manifest_classpath -Dweblogic.Name=AdminServer -Djava.security.policy=/opt/bea/wls92/weblogic92/server/lib/weblogic.policy weblogic.Server
Listening for transport dt_socket at address: *8453*
Now, if I start the server from the command line I see that the dt_socket listens on the port I set in setDomainEnv.sh.

Changing the port?

Is it possible to change the outgoing port for iChat?
yea, that's all I really want to know.
Help me oh gods of apple.

Hi peter,
Yep.
Open iChat > iChat menu > Preferences >Accounts
Click once on your account you want to change
Go to the Server settings tab
Make sure you are Logged out of AIM
Change the port (5190) to 443
This will change the log in porta and Text chatting as well.
Video and Audio and the ports used to get a chat going are not changable.
Ralph

Changing the port numbers of the KXS, KJS, KCS, CXS

hi,
If i want to change the ports of any processes on iAS 6.5, say for KJS, should i to do it in the following way?
Go to iPlanet Registry Editor and move to software/iplanet/application server/6.5/ccso/eng/1/ directory.
There there is a key called port with an entry 10819. If i change it to desired port number, is it sufficient?
thanks in advance,
desigan

Hey Nicolas, I have checked the min and max handlers. it was just 2. so the port numbers are okay.
After i change PSDBGSRV port number the PSDBGSRV has been started but it gave me the error at PSRENSERV, which is next to PSDBGSRV.
I have increased the PSRENSERV ports also by 10.
default_http_port=7190
default_https_port=7153
default_auth_token=peoplesoft.com
But it still giving me the error.
PSDBGSRV.2120 (0) [12/20/08 15:56:00](0) PeopleTools Release 8.49 (WinX86) starting
PSDBGSRV.2120 (0) [12/20/08 15:56:00](0) Cache Directory being used: C:\HRDMO\appserv\HRDMO\CACHE\PSDBGSRV_1\
PSDBGSRV.2120 (0) [12/20/08 15:56:01](0) Server started
PSRENSRV.2408 [12/20/08 15:56:01](0) PeopleTools Release 8.49 (WinX86) starting
PSRENSRV.2408 [12/20/08 15:56:01](3) Switching to new log file C:\HRDMO\appserv\HRDMO\LOGS\PSRENSRV_1220.LOG
PSWATCHSRV.4012 (0) [12/20/08 15:56:17] Shutting down
PSADMIN.2796 (0) [12/20/08 15:56:23](0) End boot attempt on domain HRDMO
Thank you.

Change the port number

can i install Oracle server and tomcat server on same machine ?
how to change the port number in OracleXE 10g. so that i can install oracle Data base and tomcat on same machine.

can i install Oracle server and tomcat server
on same machine ?Yes.
>
how to change the port number in OracleXE 10g.
so that i can install oracle Data base and tomcat on
same machine.Just make sure Tomcat is running while you install Oracle, and it should find the port in use.
Otherwise, turn tomcat off, install using port 8080, and use the sqlplus command 'exec dbms_xdb.sethttpport(8090); to change the port to 8090 after the fact.
Before installing:
1) On WIndows, use a LOCAL machine administrator, not a domain administrator or non-admin user;
2) On Windows, turn off all firewalls before installing; on Fedora, turn off SELinux;
3) If there was a previous Oracle on the machine, on windows make sure the registry is clean.

Changing the port of JBoss Server

Similar Messages

Maybe you are looking for