Changing the site to be dynamic, running into problems

I have a site I've been working on for several weeks. The
individual sections are fairly dynamic in terms of actionscript
running most of the frame, and each section only being one frame.
I'm trying to get rid of the timeline altogether by using
attachMovie, and am running into some issues. I need it to go to
the label "start_fr" when they enter in a set password and
username, and nothing is happening when I press the submit button.
I think it may be because I'm motion tweening the login_mc,
so my actionscript is inside the last frames tween(I'm eventually
dynamically programming those too, but on thing at a time, right!?)
. Am I on track? Is this where listeners come into play,
because I've had the most trouble with that concept as I move on to
learning more true dynamic programming.
========================================================

Hi,
You are using onEnterFrame to attach MovieClip.
onEnterFrame = function () {
attachMovie("login_mc", "login_mc", 0 ,{_x:centerX,
_y:centerY});
gotoAndPlay("login");
Actually what happening here is : It will attach Lot of
movieClips with the name of login. So Access problem will occur.
OnEnterFrame is a infinite loop. you have to Remove it manually. or
use onLoad instead of onEnterFrame
if your submit button is inside the login_mc. u have to use
login_mc.submit_btn.onRelease = function();

Similar Messages

  • My edits in Photos 1.0 are not changing the photos. Are others running into this problem?

    I uploaded photos from my iPhone.
    When I try to edit them on my Mac, nothing happens. I can move all the adjustment bars (brightness, shadows, highlights, etc., but nothing happens to the photo.

    I had the same problem, it never happened in iPhoto.
    Simple solution: quit Photos and start again, it will work.

  • I am trying to use the brightness adjustment on a grayscale photoshop CS6 file.  The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment.  I have run into this problem b

    I am trying to use the brightness adjustment on a grayscale photoshop CS6 file.  The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment.  I have run into this problem before, although rarely, with some other files over the years and with earlier versions of CS.  I would like to know how to overcome this problem?

    Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.

  • How to change the text in JTextField Dynamically

    i am trying to change the contents of JTextField dynamically like this
    textfield.setText();but it is giving error...........how can i do it....

    here is the code .....it is showing error in line 18 and 20 as identifier expected
    their i am trying to make JTextField editable....
    plz have a look
    import java.awt.*;
    import java.awt.event.*;
    import java.io.*;
    import javax.swing.*;
    import javax.swing.filechooser.*;
    import javax.swing.SwingUtilities.*;
    import javax.swing.filechooser.FileFilter;
    //import javax.swing.JEditorPane;
    import java.net.URL;
    public class tm extends JFrame implements ActionListener
    public JTextField[] programtext = new JTextField[30];
    public JTextField[] tapetext = new JTextField[30];
    tapetext.setEditable(true);
    public JTextField[] statetext = new JTextField[30];
    statetext.setEditable(true);
    int count =0;
    public static void main (String arg[]){
    tm m=new tm();
    m.setSize(1000,500);
    m.show();
    JButton loadp, run, step,loadi,loads;
    public tm()
    Container c ;
    c = getContentPane();
    c.setLayout(new FlowLayout());
    loadi = new JButton("LOAD INPUT STRING");
    c.add(loadi);
    loadi.addActionListener(this);
    loadi.setBounds(200,25,100,50);
    loadp = new JButton("LOAD PROGRAM");
    c.add(loadp);
    loadp.addActionListener(this);
    loadp.setBounds(300,25,100,50);
    run = new JButton("RUN");
    c.add(run);
    run.addActionListener (this);
    run.setBounds(400,25,100,50);
    step = new JButton("STEP");
    c.add(step);
    step.addActionListener(this);
    step.setBounds(500,25,100,50);
    loads = new JButton("LOAD STATES");
    c.add(loads);
    loads.addActionListener(this);
    loads.setBounds(600,25,100,50);
    JPanel prog = new JPanel();
    prog.setLayout(new GridLayout(30,1));
    for(int i=0;i<programtext.length;i++)
    programtext= new JTextField(10);
    prog.add(programtext[i]);
    JPanel tape = new JPanel();
    tape.setLayout(new GridLayout(30,1));
    for(int i=0;i<tapetext.length;i++)
    tapetext[i]= new JTextField(10);
    tape.add(tapetext[i]);
    JPanel state = new JPanel();
    state.setLayout(new GridLayout(30,1));
    for(int i=0;i<statetext.length;i++)
    statetext[i]= new JTextField(10);
    state.add(statetext[i]);
    JPanel contentPane3 = new JPanel();
    contentPane3.setBorder(BorderFactory.createEmptyBorder(50, 50, 50, 50));
    contentPane3.setLayout(new BorderLayout());
    contentPane3.add(state, BorderLayout.CENTER);
    contentPane3.add(c, BorderLayout.NORTH);
    contentPane3.add(prog, BorderLayout.WEST);
    contentPane3.add(tape, BorderLayout.EAST);
    setContentPane(contentPane3);
    public void actionPerformed(ActionEvent e)
    try{
    if(e.getSource ()==loadp)
    JFileChooser chooser=new JFileChooser();
    int r= chooser.showOpenDialog(this);
    if(r==JFileChooser.APPROVE_OPTION )
    String name=chooser.getSelectedFile().getName();
    File f=chooser.getSelectedFile();
    FileInputStream filestream = new FileInputStream(f);
    BufferedInputStream bufferstream = new BufferedInputStream(filestream);
    DataInputStream datastream = new DataInputStream(bufferstream);
    String record = null;
    programtext[0].setText("");
    try { 
    int i = 0;
    while (true)
    record=datastream.readLine();
    if(record == null){
    break;
    programtext[i].setText(record);
    i++;
    count = count + 1;
    System.out.println ("the no of lines of the program are"+ count);
    catch (Exception p)
    System.out.println(p);
    else if(e.getSource()==loads)
    JFileChooser chooser3=new JFileChooser();
    int r3= chooser3.showOpenDialog(this);
    if(r3==JFileChooser.APPROVE_OPTION)
    String name=chooser3.getSelectedFile ().getName();
    File f3=chooser3.getSelectedFile();
    FileInputStream filestream3 = new FileInputStream(f3);
    BufferedInputStream bufferstream3 = new BufferedInputStream(filestream3);
    DataInputStream datastream3 = new DataInputStream(bufferstream3);
    String record3 = null;
    statetext[0].setText("");
    try { 
    int i = 0;
    while (true)
    record3=datastream3.readLine();
    if(record3 == null){
    break;
    statetext[i].setText(record3);
    i++;
    catch (Exception p3)
    System.out.println(p3);
    else if(e.getSource()==loadi)
    JFileChooser chooser2=new JFileChooser();
    int r2= chooser2.showOpenDialog(this);
    if(r2==JFileChooser.APPROVE_OPTION )
    String name=chooser2.getSelectedFile().getName();
    File f2=chooser2.getSelectedFile();
    FileInputStream filestream2 = new FileInputStream(f2);
    BufferedInputStream bufferstream2 = new BufferedInputStream(filestream2);
    DataInputStream datastream2 = new DataInputStream(bufferstream2);
    String record2 = null;
    tapetext[0].setText("");
    try { 
    int i = 0;
    while (true)
    record2=datastream2.readLine();
    if(record2 == null){
    break;
    tapetext[i].setText(record2);
    i++;
    catch (Exception p2)
    System.out.println(p2);
    else if(e.getSource ()==run)
    String temp="";
    String statetemp=" ";
    String tapetemp=" ";
    int l=0;
    int tp=0;
    String pars[][] = new String[50][5];
         for(int m=0;m<count;m++){
    temp = programtext[m].getText();
    String str[]=temp.split(" ");
    for(int k=0;k<5;k++){
    pars[m][k] =str[k];
    System.out.println(pars[m][k]);
    statetemp = statetext[0].getText();
    tapetemp = tapetext[l].getText();
    while(pars[tp][0]==statetemp && pars[tp][1]==tapetemp && tp><count)
         statetemp = pars[tp][2];
         tapetemp = pars[tp][3];
         statetext[0].setText() = statetemp;
         tapetext[tp].setText() = tapetemp;
         if(pars[tp][4]=="R")
         l=l+1;
         else{
         l=l-1;
         tp++;      
    else if(e.getSource()==step)
    catch(Exception t)
    System.out.println(t);

  • Problem while changing the JSplitpane in a dynamic way.

    Hi Everyone,
    In my application i'm changing the jsplitpane in a dynamic way.i'm posting the sample code thatz giving problem.Kindly compile and execute this.In the first frame i've done a split of two parts. The top component has got the name of the application and the bottom component has got some links related to that application. If the user click on this link ,i'm capturing the bottom component alone from the original splitpane and i'm breaking that into another split.
    upto this every thing works fine.Now the problem is when ever the user click on that link it'z capturing that event and doing consecutive split on the bottom frame.But i need that paricular split that user has already got to be repainted for all the time when user click on the link.Eventhough i've captured the main splitpane object in some other variable and assiging the same to the second window when user click on that url.But itz not recognizing that.
    Kindly some one help me to resolve this.
    import java.awt.Color;
    import java.awt.Container;
    import java.awt.Dimension;
    import java.awt.Font;
    import java.awt.GridBagLayout;
    import java.awt.event.MouseEvent;
    import java.awt.event.MouseListener;
    import java.util.Vector;
    import javax.swing.JFrame;
    import javax.swing.JLabel;
    import javax.swing.JPanel;
    import javax.swing.JScrollPane;
    import javax.swing.JSplitPane;
    public class Test2 extends JPanel // implements KeyListener
        static Vector<String> arrAppName = new Vector<String>();
        public static JSplitPane splitPane,splitPane2;
        public void AppWin(final JFrame frame)
            Container contentPane = this;
            GridBagLayout gb = new GridBagLayout();
            contentPane.setLayout(gb);
            arrAppName.add("link");
            JLabel lab = new JLabel("<html><font color=#6698FF><a href>" + arrAppName.get(0) + "</a></font></html>");
            contentPane.add(lab);
            JScrollPane listScrollPane = new JScrollPane(contentPane);
            JLabel label = new JLabel("APPLICATION REPORT", JLabel.CENTER);
            Font font = label.getFont();
            Font font3 = font.deriveFont(25.0f);
            label.setFont(font3);
            label.setFont(label.getFont().deriveFont(Font.ITALIC));
            label.setHorizontalAlignment(JLabel.CENTER);
            label.setForeground(new Color(0x736AFF));
            JScrollPane labelScrollPane = new JScrollPane(label);
            labelScrollPane.setVisible(true);
            // Create a split pane with the two scroll panes in it.
            splitPane = new JSplitPane(JSplitPane.VERTICAL_SPLIT);
            splitPane.setTopComponent(labelScrollPane);
            splitPane.setBottomComponent(listScrollPane);
            splitPane.setDividerLocation(100);
            Dimension minimumSize = new Dimension(100, 50);
            listScrollPane.setMinimumSize(minimumSize);
            labelScrollPane.setMinimumSize(minimumSize);
              splitPane2= new JSplitPane();
              splitPane2=splitPane;
            lab.addMouseListener(new MouseListener()
                public void mouseClicked(MouseEvent arg0)
                    displayMainFrame("link", frame);
                public void mousePressed(MouseEvent arg0)
                public void mouseReleased(MouseEvent arg0)
                public void mouseEntered(MouseEvent arg0)
                public void mouseExited(MouseEvent arg0)
        public void buildWindow(String link, JFrame frame)
            Container contentPane = this;
            GridBagLayout gb = new GridBagLayout();
            contentPane.setLayout(gb);
            JLabel label = new JLabel("Next Screen", JLabel.CENTER);
            Font font = label.getFont();
            Font font3 = font.deriveFont(25.0f);
            label.setFont(font3);
            label.setFont(label.getFont().deriveFont(Font.ITALIC));
            label.setHorizontalAlignment(JLabel.CENTER);
            label.setForeground(new Color(0x736AFF));
            JScrollPane buildWindowtop = new JScrollPane(label);
            buildWindowtop.setVisible(true);
            contentPane.add(buildWindowtop);
           /*assigning the main split pane object for all the consecutive call*/
            splitPane=splitPane2;
            JSplitPane splitPane1 = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT);
            splitPane1.setTopComponent(splitPane.getBottomComponent());
            splitPane1.setBottomComponent(contentPane);
            splitPane.setBottomComponent(splitPane1);
            splitPane.setOneTouchExpandable(true);
            splitPane.setDividerLocation(100);
            Dimension minimumSize = new Dimension(100, 50);
            buildWindowtop.setMinimumSize(minimumSize);
            splitPane1.setMinimumSize(minimumSize);
        } // end printing rows
        public static void displayFrame(String tname, JFrame framedisp, String buttonName, String tranCorrID,
            String buttonOption, JSplitPane buildSplit)
            Test2 mainDispPane = new Test2();
            framedisp.getContentPane().add(splitPane);
            framedisp.setVisible(true);
        public static void displayMainFrame(String link, JFrame framedisp)
            Test2 mainDispPane = new Test2();
            mainDispPane.buildWindow(link, framedisp);
            framedisp.getContentPane().add(splitPane);
            framedisp.setVisible(true);
        public static void main(String[] args)
            JFrame frame = new JFrame("MAIN WINDOW");
            frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            Test2 mainPane = new Test2();
            mainPane.AppWin(frame);
            frame.getContentPane().add(splitPane);
            frame.setSize(1280, 1000);
            frame.setVisible(true);
        } // end main
    } // end Test2Thanks in Advance,
    Siva.

    anybody can help me this regard?

  • Changing the Target data store dynamically

    Hi,
    I have a requirement to load same kind of data into 12 different target tables. Client maintains data in period vise, i.e. Jan data in a table TABLE_01, Feb data in TABLE_02, Dec data in TABLE_12 etc. The structures of all these tables are same.
    My program will process only one period’s data at a time and processed data will be loaded into a table TABLE_SRC. After this, according to the processing period, I need to post the data into the target tables TABLE_01, TABLE_02 etc. i.e. if the data is for period Jan then to TABLE_01, data is for period Feb then to TABLE_02 and so on.
    For accomplishing the same, I need to create 12 different interfaces. So is there any way to accomplish the same using a single interface by changing the target data store dynamically? I am looking for a solution other that creating procedures.
    Any Help is appreciated.
    Thanks in advance.
    DJ

    Yes, it is possible....
    1) at the target datastore use a variable at resource
    2) create a query that returns all target tables in a source tab (procedure step)
    3) at target tab, call the interface scenario send the query result as parameter.
    That will allow you execute the same interface for disitnct targets.
    Does it help you?

  • Running into Problems with Flash Player with some sites and not others

    Hi All,
    I've run into problems with Flash Player 10,0,45,2. In IE 8, FF 3.6.3 and Google Chrome (which I downloaded as a last ditch measure), some websites (such as youtube) work fine. Other sites such as wimp.com I get an empty box. I've reinstalled flash, but haven't seen much else in these forums to try to figure out what the problem is.
    Any help would be greatly appreciated.

    Bump.         

  • How to change the text of label dynamically

    Hi all,
    I have done a dynpro program.It requires to implement the dynamically display the label text, for example: there is a label, sometimes, we want to display "Purchase Order" and sometimes we want to display "Sales Order". Can anyone tell me how to change the text of label according to my requirements? thanks in advance!

    Hi Wei,
    AS of now you will not be able to change the Text Field ( Label ) dynamically or at runtime. This is a limitation.Refer to this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/e4/2adbef449911d1949c0000e8353423/frameset.htm
    But, there is a way around.
    You can make a text field Visible / Invisible based on your program logic. So, based on what you want, you can process a module which will take care of that.
    Have a look at these DEMO Code. You can have a good idea to implement the logic.
    DEMO_DYNPRO_MODIFY_SCREEN - Demonstration of Dynamic Screen Modifications
    Thanks,
    Samantak.

  • Changing the Site URL of a Sharepoint site changes the content type order

    Description
    Changing the Site URL of a Sharepoint site changes the content type order of all lists that
    * contain folder content types
    * and have a custom content type order
    * where a folder content type is the first content type in order.
    Reproducible behaviour
    1. Create a Team Site in Sharepoint
    2. Create a Task List "Test" on the Team Site
    3. Go to List Settings
    4. The Content Type order is by default
        a. Task
        b. Summary Task
    5. Change the Content Type Order to
        a. Summary Task
        b. Task
    6. Go To Site Settings "Title, description and icon"
    7. Change the Site Url
    8. Go To List "Test" List Settings
    9. The Content Type order now is
        a. Task
        b. Summary Task
    10. Select "Change New button order and default content type"
    11. Here, the Content Type order still is
        a. Summary Task
        b. Task
    Is this a bug? Has anyone noticed this behaviour before?
    Kind Regards,
    Joachim

    Hi Joachim,
    You are not missing something or doing something wrong. i Hope :). This behavior is reproductible.
    The granularity of change is better by Powershell. But by the interface is most user-friendly.
    Maybe that's the reason of this behavior.
    Gilles Martinez
    Twitter
    Blog
    Please mark as helpful/answer if this resolved your post

  • HT204053 Hi all, I am constantly running into problems opening iCloud services (mail, calendars, iWork's, etc.). I get a message stating i.e. Can't load Mail (Calendar, iWork), There was a problem loading the application. Does anybody know what a heck is

    Hi all, I am constantly running into problems opening iCloud services (mail, calendars, iWork's, etc.). I get a message stating i.e. Can't load Mail (Calendar, iWork), There was a problem loading the application. Does anybody know what a heck is going on?

        I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • [svn] 1743: In the process of changing the messaging authentication tests to run over individual channels .

    Revision: 1743
    Author: [email protected]
    Date: 2008-05-15 12:26:11 -0700 (Thu, 15 May 2008)
    Log Message:
    In the process of changing the messaging authentication tests to run over individual channels. Before the tests were just running over the first/default channel in the destination. Now the tests will be hardcoded to run over a particular channel. In this checkin I am removing the existing authentication tests and checking in tests that run over a polling amf channel. Tests for other channels are coming soon.
    Modified Paths:
    blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/flex/messaging-config.mods.xml
    Added Paths:
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/JMSAuthConSubscribeTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/JMSAuthProSendTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/JMSAuthSendSubscribeConstraintTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/MessagingAuthConSubscribeTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/MessagingAuthProSendTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/MessagingAuthSendSubscribeConstraintTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/MessagingAuthenticationTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/MessagingAuthenticationTest2.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/MultiTopicMessagingAuthConSubscribeTest.mxml
    Removed Paths:
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/JMSAuthConSubscribeTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/JMSAuthProSendTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/JMSAuthSendSubscribeConstraintTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/JMSAuthSendSubscribeConstraintTest_Streaming.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/MessagingAuthConSubscribeTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/MessagingAuthProSendTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/MessagingAuthSendSubscribeConstraintTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/MessagingAuthenticationTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/MessagingAuthenticationTest2.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/MultiTopicMessagingAuthConSubscribeTest.mxml

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • XML queries... Change the code from using Oracle db into MS SQL

    Hi, I am a new begginer in this field. I came accross to an article that focuses in Oracle's XSU approach.
    Currently, i am trying to convert the java code from using Oracle db to MSSQL db. The code has shown below:
    import javax.naming.*;
    import javax.sql.*;
    import java.sql.*;
    import oracle.xml.sql.query.*;
    public class testxml
         public static void main(String args[]) throws SQLException, NamingException
         String tabName = "emp";
         int maxRows = 3;
         Context ctx = new InitialContext ();
         DataSource ds = (DataSource) ctx.lookup ("MyOra");
         Connection conn = ds.getConnection ();
    OracleXMLQuery qu = new OracleXMLQuery (
    conn, "select EMPNO, ENAME from " + tabName);
    qu.setMaxRows (maxRows);
    qu.setRowsetTag ("EMPLOYERS");
    qu.setRowTag ("PERSON");
    String xmlString = qu.getXMLString();
    System.out.println (xmlString);
    conn.close ();
    Currently, i am having difficulties to change the "bold" area that uses Oracle into MS SQL as my current application is using MS SQL as the database.
    Please help and need more advices from all of you. Thank You

    I resolved this issue myself. For the answer please message me.

  • How can I change the Microsoft Office Click to Run from drive letter 'Q' to something else?

    How can I change the Microsoft Office Click to Run from drive letter 'Q' to something else?
    We have a legacy app that used drive letter 'Q' already, now the newer machines are coming in with 'Q' preassigned to Microsoft Office Click to Run, and it is causing problems.  There has to be a way to change the drive letter assignment to some
    other letter besides 'Q' 

    Hi,
    Office that is delivered by Click-to-Run is installed on the Q drive, this cannot be changed.
    To work around this problem, uninstall the Click-to-Run version of Office and then install with the traditional MSI-based installation.
    To switch to using an MSI-based Office edition, you can learn something useful from this link below:
    http://office.microsoft.com/en-us/excel-help/click-to-run-switch-to-using-an-msi-based-office-edition-HA101850538.aspx
    Regards,
    Melon Chen
    TechNet Community Support

  • Changing the Alert style Property Dynamically

    hI..
    Is there any way to change the Alert Style Property Dynamically.... if there please tell me its urgent
    thnks in advance
    Regards
    Yashavanth

    yes, u can change properties dynamically through set_alert_property and set_alert_button_property
    here is an example
    DECLARE
    err_txt VARCHAR2(80) := Error_Text;
    al_id Alert;
    al_button Number;
    BEGIN
    al_id := Find_Alert('My_Error_Alert');
    Set_Alert_Property(al_id, alert_message_text, err_txt );
    al_button := Show_Alert( al_id );
    END;

  • When I changed my Apple ID the ID did not change on my iCloud account. there appears to be no way to change the ID because I cannot get into account settings for iCloud

    When I changed my Apple ID the ID did not change on my iCloud account. there appears to be no way to change the ID because I cannot get into account settings for iCloud

    If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID and that ID is a previous version of your current ID, not an entirely different one.
    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details and some other circumstances.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
    You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    This article provides more information about Activation Lock.

Maybe you are looking for

  • IP Phone SSL VPN to ASA for multiple CUCM (CallManager)

    hi all, I have a case to support multiple CallManager clusters in different locations for internet SSL VPN IP Phone. We will deploy one ASA firewall for SSL VPN IP Phone connections. So, can we use single ASA firewall for mulitple CUCM clusters?? In

  • White Macbook (Early 2009) Why mini-DVI to S-video adapter no longer works?

    I am a lifelong Mac user and by now think I pretty well know the ins and outs of Macs and most Mac-related issues... but this one has stumped me. The new white Macbook was upgraded to include many of the components of its big brother unibody Aluminum

  • Managing planning time fence ( P1 MRP type ) and firm zone in ME32L

    Hello, I want to know if there is or are some documents to know how to manage planning time fence in MM02 and firm zone in ME32L ? For me, in ME32L the firm zone is the firmed quantities sent to suppliers but not firmed for MRP so how to manage this

  • How to populate multiple entries to Bapi Table

    Hi all,   How to populate multiple entries to Bapi Table..... Here is the code(in component controller)   Z_Recr_Apply_Point_Input request = new Z_Recr_Apply_Point_Input(WDModelScopeType.TASK_SCOPE);        int  size = wdContext.nodeApplicants().size

  • .PDF attachment, workflow, FAX

    I would like to attach a .PDF document to a workflow and the final result is to fax the PDF from the workflow. Does anyone have any suggestions?  Thanks