Changing the state of a network card

Hi,
I have a fast ethernet card. When I use ifconfig -a,it show me:
hme0: flags=870<UP,POINTTOPOINT,NOTRAILERS,RUNNING,MULTCAST>
What I need to do to change POINTTOPOINT to BROADCAST on this card ?
Thanks,
ROberto Samarone Araujo

you may have a incorrect "/etc/hostname.hme0" file
it should contain a single entry of a hostname or IP number.
If there are 2 entries by mistake in the file, ifconfig sets up a point to point link.

Similar Messages

Does performing a DAQmx Clear Task on a PCI-4474 card change the state of the IEPE current?

Does performing a DAQmx Clear Task on a PCI-4474
card change the state
of the IEPE current? If the IEPE current was on, does it remain
on even though the task as been cleared? If the IEPE current
remains on, then I assume I don't have to wait for the IEPE current to
settle if I make a new Task and start a new measurement--is this
correct?
Thank you in advance for your help.
Ken

DAQmx Clear Task should not turn off IEPE current. You will have to explicity set IEPE current to On (for that channel) whenever you use any of the AI channels on your 4474 in order to keep the IEPE On because the IEPE for all channels in the AI subsystem will be set to the default state (Off) unless explicitly configured. That said, if you clear a task that had IEPE On, and then initialize a new task and set IEPE On, the IEPE will be uninterrupted and there should be no need to wait for the IEPE to settle. Other components of your measurement system might need time to settle if their state was changed between tasks (DUT, sensor, AC coupling, etc.)
Doug
NI Sound and Vibration

How can I change the state of a runtime menu item programatically?

Using LabView 6.1, I would like to change the state of the runtime menu item "Operate/Print at completion".
The goal here is to print the VI front panel according to the operator choice (OK ->print, Cancel ->don't print)
In a first release, I put a Stop function at the dialog output (activated by the cancel button) but this function stop the complete application and my idea where to stop only the VI in which the dialog is running.
In a second release, I've tried to use the "Application
control/Menu" but I receive every time an error:
Error 88 occured at Cannot modify application menu item in the printtest.vi.
Possible reasons: LabView, Runtime menu error...
Any suggestion is appreciated.
Re
gards,
phidu

Instead of using the print at completion option, print the VI programatically if the user selects to print...open a reference to the VI you want to print and use an invoke node to print vi to printer.
Alternatively create another VI with a layout optimized for printout, set it to print at completion and run and load the data into that VI if and only if the user OKs the print...
Mads
MTO

HT1918 I would like to change the data of my credit card. For the next year I live in Germany, I have a geman visa card, but I want the itunes and everything to be in english language. How can I do this?

I would like to change the data of my credit card. For the next year I live in Germany, I have a german visa card, but I want the itunes and everything to be in english language. How can I do this?

You cannot.

HT3986 Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

uhm hey guys,
idk where else to get help so ima try here,
i got windows 8 installed with bootcamp on my macbook pro late 2010 (5, 5) and theres no sound coming out of it, so i installed an nvidia audio driver (idk, it could be the incorrect one) but i have nvidia GeForce 320 on my macbook.
do you know what i should install ?
but when i go onto my osx the sound is fine, so i figured im missing something on windows 8
Orrrr could i just go out and get parallels and hope it doesn't get the same problems?

How do I change the states of the "Submit" button in adobe muse?

How do I change the states of the "Submit" button in adobe muse? Currently I can only change the color, text and stroke of the button, but I cannot customize it as I have the other buttons in the tool.

I want to replace the button with an image, however it does not permit me to paste an image into the button, nor does it allow me to delete the box that is currently there. The best I can do is paste the image into the text box that is provided.

Can I change the state of an object by highlighting over text?

That question probably doesn't make sense, but I didn't know how to word it with just a few words.
I'm working on a site where I have a 'button' that has text in it. When someone hovers over the button, it changes colors (it's basically showing the user that the site is responding). When I put text inside the button, it causes the button to not change colors when I hover over it.
I know that it's happening because the text is covering up the area that is supposed to respond to the user's mouse.
So, I'm wondering if there is a way of either making the text and the 'button' all one object, or if it's possible to make the text 'invisible' to the mouse. What I mean by 'invisible' is that the computer wont acknowledge the text which will make the button responsive to the user's mouse.
I am able to do this through photoshop but I was just wondering if it's possible to do this in only muse.

Hi
You can define states for the background layer such as rectangle and then insert text frame which will change the state on hover of mouse, but if the text frame covers the background then it wont active the state.
The purpose that you are trying to achieve such as invisible text to mouse is not possible with native menu features , but yes as you have mentioned you can use an image for this , write up the text and use the image.
The state button has same feature with rectangle in background and text within that.
Thanks,
Sanjit

I want to change the payment mode to credit card the problem that am still having some cents in my account how i can fix it ?

I want to change the payment mode to credit card the problem that am still having some cents in my account how i can fix it ?

You need to contact Apple so they can zero out the balance for you > Contacting Apple for support and service

Change the Name of a credit card in Apple Pay

Is there a way to change the name of a credit card in Apple Pay? I have both personal and business cards and thry look exactly the same in the passport. It would be a great feature to be able to nickname accounts.

-> Right-click the '''New Folder''' and click '''Properties'''
* in the ''Name'' field, type the name of this folder
* click '''Save''' button
Check and tell if its working.

I just want to change the name of my network. no other settings?

I just want to change the name of my network. no other settings?

We can likely help, but we do not know what device that you are asking about....or....what version of AirPort Utility that you have on your computer.
(Normally, we would know things like this, but our crystal ball is broken).

How can we change the state of records in view cache and entity cache

Hi everybody,
I am trying to achieve selective rollback, or selective commit. By this I mean that I am looking for a way to change the state of rows in view cache, so that the selective changed rows can be rolled back during comit.
if anyone has tried anything in this please help me.

I agree!
I can't top this approach.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Changing the state of Iterator?

Hi!
I'm using ADF Faces, and I want to change the state of an Iterator from a backing_bean? Is it possible?
If it isn't: anybody knows how to manipulate manually the state of an iterator?
Thanks in advance,
Jaime.

Hi Frank.
The iterator actually is in the state "Create". I want to show the data of one record. The state may be something as "Show".
Also, could you give me information about the avalaible states of an iterator?
Best regards,
Jaime

Always re-launch Excel 2007 Smartview tab change the state to disabled...

Hi all,
I need some help about Smartview 11.1.2.5. I upgraded smartview users to version 11.1.2.5 but in one user i have an issue, that drive me crazy.
After install Smartview I opened a spread sheet and enabled Smartview add-in, user works normally and refresh and everything was ok. After he re-launch the excel the Smartview add-in change the state to disabled, I change to enabled and he works normally. The problem is, every time he open excel the smartview is disabled. How can i resolve this issue??
Best Regards,
João Ferreira

Hi,
Thank you for your question. I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience. Thank you for your understanding and support.
Thanks,
Linda Li
Linda Li
TechNet Community Support

Can we change the state based upon another field value?

I want to change the state to Done when completed work is set to 0. I googled it and came to know about this:
Handle it from the server side, monitoring the WorkItemChanged event. The downside is that it doesn't reflect immediately in the end-user screen. After editing a work item, the user would have to hit Refresh to see the new state.
Will it be perfect in this way? Any other suggestions.
Please provide best links to learn about creating server plugins and depoying.

Hi divya,
For your questions, you can refer to the link that Alexandr mentioned above to check the Pros and cons of custom controls for work item tracking.
And for server side plugin, it has the ability to capture all the occurred events without exception. You can get more information about how to implement it by refering links below:
https://socialtfs.codeplex.com/wikipage?title=How%20to%20create%20and%20debug%20a%20Team%20Foundation%20Server%20server-side%20plugin&referringTitle=Documentation
http://vgaltes.com/index.php/2013/04/14/create-a-team-foundation-server-event-handler/
http://geekswithblogs.net/jakob/archive/2010/10/27/devleoping-and-debugging-server-side-event-handlers-in-tfs-2010.aspx
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I change the state in the shipment info in the account setting?

How can I change the state in the shipment info in the account setting?
I was trying to buy an Apple TV from the store but, I live in Italy and at the moment (for long time) I'm in Deutschland.
From the shipment information i didn't find the possibility to change the state. From default is ITALY but I need to receive in Deutschland.
Did somebody know how to???
Thanks in advance!!!

Hi 7oaksGaz,
1) Due to tax reasons, it's not possible to change the country associated with an existing Adobe ID.
Follow the steps mentioned in the below link as a workaround to create an Adobe ID with the email address you currently use for the existing Adobe ID.
http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
2) You can change the language of the application from AAM preferences
Please find the link below for the article with the steps
http://helpx.adobe.com/creative-cloud/kb/creative-cloud-trial-mode.html
Thanks!
Eshant

Changing the state of a network card

Similar Messages

Maybe you are looking for